hi i been upgrading the rom of my tilt , and everythings work well.
only have a doubt .
the rom i upgrade it, its hyperdragon blacktones 031208
and one of the features when you receive a call appear a screen shot
that say answer or decline,
someone now why dont work the touchscreen have to use the buttons of my device.
its some bug on this or i need to have installed a program or there its a setting that i missed
thanks
aacshar
Post your question in that thread.
Thread closed.
Related
Moin' good folks.
First of all; i love this community! Just reading on here has helped me i ways i never though possible. But here comes a stopper.
The stopper i'm talking about is a bug/difficulty i'm having with the ROM i'm currently using and it appears when I recieve calls. Not always though. Just some times.
What happens:
1. After a soft reset, I can accept a call, but there's no sound at all. I can't hear people, people can't hear me.
Although, if I make a call, all works just fine, and after I've made the first call after a soft reset, incoming calls suddenly also start working like they're supposed to. In short; After a soft reset, i first have to make a call to someone, in order to get sound on incoming calls working.
2. Also, if someone calls me while I'm viewing the last incoming/missed/calls, the phone completely hangs up and i have to take out the battery to make it respond again.
Technical info:
Model: TyTN II (Norwegian version, no practical difference i believe)
ROM: Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (Lightweight, and with working cleartype)
Radio: R 1.64.08.21 (Thanks corian!)
SPL: HardSPL V1
After having looked around for a while, I did find something about installing another radio software. might this be the solution here? If so, I'd be happy with a pointer to the right direction.
(I'm very sorry if I've ignored something very obvious or didn't find the right post prior to posting here. I'm relatively new here so please don't kill me.)
thanks in advance,
Bjornh.
bjornh said:
Moin' good folks.
First of all; i love this community! Just reading on here has helped me i ways i never though possible. But here comes a stopper.
The stopper i'm talking about is a bug/difficulty i'm having with the ROM i'm currently using and it appears when I recieve calls. Not always though. Just some times.
What happens:
1. After a soft reset, I can accept a call, but there's no sound at all. I can't hear people, people can't hear me.
Although, if I make a call, all works just fine, and after I've made the first call after a soft reset, incoming calls suddenly also start working like they're supposed to. In short; After a soft reset, i first have to make a call to someone, in order to get sound on incoming calls working.
2. Also, if someone calls me while I'm viewing the last incoming/missed/calls, the phone completely hangs up and i have to take out the battery to make it respond again.
Technical info:
Model: TyTN II (Norwegian version, no practical difference i believe)
ROM: Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (Lightweight, and with working cleartype)
Radio: R 1.64.08.21 (Thanks corian!)
SPL: HardSPL V1
After having looked around for a while, I did find something about installing another radio software. might this be the solution here? If so, I'd be happy with a pointer to the right direction.
(I'm very sorry if I've ignored something very obvious or didn't find the right post prior to posting here. I'm relatively new here so please don't kill me.)
thanks in advance,
Bjornh.
Click to expand...
Click to collapse
Oh, congratulation mate. u hv break xda-developers rule. get ur (_)(_) ready.
Since it is your first post I won't flame you about not reading the very obvious. It is almost for sure your radio that needs changed. I don't which ROM you are using but if you look in the first 2 or 3 post Dutty will have recommended the radio for it. Here is the post with all the radio info read it.
http://forum.xda-developers.com/showthread.php?t=393182
He even had an idea of what to do and rather than do it he thought a new thread was a more appropriate thing to do.
You are lucky to have been handled in such a gentle way by Tuah and msg1285. Now go flash a different radio and report back with your tail between your legs that all is well.
And read the Wikis and Stickies before you start your next thread. Welcome to the forum.
I have also posted this thread on General Discussion, apologies for doubling up.
I have reflashed the ROM on my TyTN II to the HTC Windows 6.1 version downloaded from their site. Everything works OK, except the phone will not accept incoming calls and i am unable to make calls out. Since this the unit has been reflashed with approx 5 different ROM's from Duttys Series (Which i had on when i purchased the unit) but it still has the same issue. It has also now had a different radio version put on and the SPL reflashed. Even after all this it still says no to incoming or outgoing calls. The strange thing is, that it does register on Vodafones network and i get a full signal, but no 3G. The unit is not locked as i have run an unlocker on it as well. I can send text messages OK.
Please can anyone help me with this problem, i am completley out of ideas and unable to use my phone.
Cheers.
A) Double posting is against the rules of XDA.
B) This has nothing to do with ROM Development
C) You only waited 4 minutes between the 2 threads.
D) You have an answer waiting for you in your other thread.
Again, apologies.
I am a newbie to this forum and once i had posted my first thread i saw the ROM section and thought i should have posted here.
It won't happen again.
Cheers
Impending Closure!
Hello to all!
I am new here and my english is not the best. (I´m from Austria)
I have tryed do find answers for my problems, but i cant find the solution.
I will tell you my problems and hope sombody can and will help me - thanks!
Since 2 weeks I´m an Samsung SGH I 900 - owner.
One of the first application was S2U2.
It works realy fine and with the faq´s in this forum very easy to handle but when i change the registry-settings, it don´t work as it should.
I wrote in Data-field from 0File \Windows\CallLog.exe and when I had a missed call and I slide to view, nothing happens...
I can´t finde the right 0Parameter-Entry...
When I set this in the S2U2Settings - Others - Run other app when unlock it works fine, but when nobody is missed, i wnt to go to TodayScreen...
This problem is done!
I installed the previous version of s2u2 and now the missed calls will be shown!!
How is it possible to show the missed calls on the locked screen like in this thread (http://forum.xda-developers.com/showthread.php?t=341926)
I can not find the right settings... only sms is shown!
Please help me to get a solution for my problems.
If you don´t want to get me the right settings directly it´s no problem to look on the right place for the reason...
Thank you very much!
iwo88
All my problems are gone...
If the Phone is locked and you had a missed call you must push on the "missed calls icon" and then slide to view and s2u2 change to CallLog.exe....
Is this possible without pushing to the icon before??
Thank you for answer!
I´ll hope this can help someone with the same problems...
Maybe this a bug in s2u2 newest version to show the missed calls on locked-display???!!!
King regards
iwo88
Sorry for the "1 Post Wonder" thread, but I have an issue with my HTC Trophy 7 running Mango.
I updated using the "plug pull" method, and pretty much everything works as I expected, except I don't have turn by turn voice navigation.
I still get the old turn by turn interface, but the voice navigation option is missing from the settings panel.
Has anyone else encountered this and is there anything I can do to fix it?
Thanks in advance..
P.s. I searched the forums for this issue, but didn't see any other helpful threads, so if I missed it, sorry >.>
EDIT:: Just read the pinned thread at the top about device specific queries.. If a mod could move this thread to the Q&A section, that would be much appreciated.
What version of Mango are you running? Make sure you updated to version 7720.68. You might have to perform the disconnect trick again.
albertleao said:
What version of Mango are you running? Make sure you updated to version 7720.68. You might have to perform the disconnect trick again.
Click to expand...
Click to collapse
Thanks for the reply albertleao,
I am running 7.10.7720.68 - So that would appear to be in order >.<
I have been using text to speed for messages and such, so all of those features are working
Having read around some more, I also tried changing my country in Hotmail to UK, tried changing all my phone settings to English (UK) etc, still no joy :\
Is there anything else I can try, or does my phone just not have it?
I guess the next question is, are there any official help contacts I can use.. I.e. HTC?
Bump!
Anyone got any information on this issue >.<
Hi
flash a unlocked rom an install the patched Navigon
you can find it in this forum.
There is also a way to use it with Australian maps.
And you will have a good offline Navi with all functions you need
I hoped this post helped
Hi there,
I already have opened a topic about my problem a couple of days ago here:
https://forum.xda-developers.com/galaxy-tab-3/help/gt-p5200-cm-13-0-beta-2-default-to-t3690326
Unfortunately nobody seems to know an answer to my question in this subforum. Therefore I thougt it might be an idea to repeat my question in a more general forum. It would be great if I could solve this somehow.
My device is a Galaxy Tab 3 (GT-P5200) running CM 13.0. As I have written in my previous thread, I have to activate the speaker manually when I'm phoning with somebody. Is it possible to make a permanent change to the system so that the speaker is active per default during phone calls?
Thanks in advance.
Best regards
willy