hi there!
i had a problem with the microphone in my universal, so i get a used motherboard and successfully replaced it.
suddenly (3 days after) it stops receiving calls ("NO GSM" error), so i tried to flash to a WM6.1 with new rom, radio and extrom.
i successfully done the rom and extrom upgrade, but radio rom keeps at 0% and dont start flashing.
i get out from bootloader and go the device proprieties and there's no info about radio rom.
i tried to backup all roms from device to sd card, using mtty1[1].42 but i cant because shows "error=FF" (i allready have done this task successfully on other device)
also tried "task 28" but without any results
i tried flash back to Imate Rom's (i dont know what the original rom, but tried 2 without success), because it only flashes rom and extrom, but no radio
i also upgrade bootloader with success.
any idea?
restore the 2 motherboards back to original devices - errors remain
yesterday, i replace the 2 motherboards back to original devices. but i keep without microphone on mine, and the NO GSM error, on the other one (broken screen)
anyone knows how to use a sd backup rom to restore on another device (different brands ID, but same device)
Related
Is there anyway to upgrade my Dopod 818 (htc magician) using MTTY? I have tried using MaUpgradeUt.exe along with change.bat etc, but I ended up "upgrading" the device with a mixture of chinese and english files, and now the country, device, and operator IDs are scrambled on the device ROM itself. I cannot use MaUpgradeUt.exe because I no longer know what the country, device and operator IDs are and I cannot run GetDeviceData.exe because the device itself is stuck on the USB/Serial screen. I also tried reverting back to my previous working ROM by flashing from the SD card (using MTTY), but I get the error "Section 1: not allow update"
My device is completely unusable right now and I am really hoping there is some way to restore its ROM without sending it back to the manufacturer. My guess is that I somehow need dump the original ROM back onto the device using MTTY, but the only command I know is "d2s" which backs up the current device ROM to an SD card. I'd really appreciate your help! Please email me or post to this forum, thank you!
UPDATE: device fixed using MaUpgradeUt_noID.exe
what a great tool -- fixed the dead device
it is no longer a $600 doorstop
Hi,
I have a M2000 which started to up the Orange NL ExtRom version 1.40.230. When I ran the app it went into bootloader mode (USB/v2.07)but BaUpgradeUT reports Error 101 and Exits.
Sooo, I downloaded the original shipping ROM and tried with that - same result, then tried using MaUpgradeUt_noID in the same folder as the original ROM - as it ignores the information that is reported back (apparently none in my case). It tells me on the next screen that it is upgrading from <blank> to <blank> - worrying. Click Upgrade and I get Error 150: ROM Upgrade Utility Error. Try to do the same with the 1.40 ROM by locating the temporary files for the .exe and running MaUpgradeUt_noID from there - same error.
It's now stuck in bootloader mode...I didn't put anything on to this before, so I can't see how the operator code would be overwritten.
Much as the M2000 works as a desk paperweight, I'd rather find a way of pushing a viable image onto it and getting it back working. Any suggestions as I am running a C500 as a replacement and going nuts with it's lack of, well, anything...
TIA
P.S. Even another ROM that will load onto it would be useful, so that I can get it back into a state where I can mess around with it again...
do you have a firewall and antivirus installed?
if i would disable them then try flashing again, I got my c500 stuck in bootloader mode after trying to sim unlock it with firewall and antivirus running
disabled them and re-ran the sim unlock and it worked, so hopfully it is the same problem as you are getting with the rom
Hi!
I asked this question first on another board, but XDA-Dev is for me the best board when it come to hard question.
So here's the problem : I think I messed up my device while trying to flash it with a french rom.
I edited the rom and swaped the headers with Hexedit from the english roms to the french roms in :
RadioFS.nbf
RadioOS.nbf
CEOS.nbf
EXTROM.nbf
But here's the problem... while flashing the device, the RadioOS is stuck at 0.1%.
If I remove the RadioOS.nbf & RadioFS.nbf from the hpRUU.ini then it flash the unit, and everything is ok except that I cannot active the Radio (cell phone), it lookup the device.
Here's what I see from the Asset Viewer:
Radio Present : Yes
Radio Firmware Version :
Radio Protocol Stack Version :
Radio Bootloader Version :
Radio File System Version :
Default Radio GDFS Version :
I've tried to reflash the device with bigrom, but no luck, it just flash CEOS.nbf & EXTROM.nbf.
Finally, if I try to flash de device from windows with the ROM12132Beta (with activesync disabled) I get an Error 514 message : device failed verification. So I hacked the rom to get it to flash (with hexedit I replaced the 3 letter language with blank space) but it get stuck at 1.0%.
So do you know if there's is a way to force the flashing of the RadioOS.nbf & RadioFS.nbf? (maybe directly from the SD card?)
Thank you very much in advance!!
Please anybody has a little idea?
Because since this is a US device and I'm in Canada I'm not covered by the warranty, so I'm really screwed. I understand this is an HP device, but it is manufactured by HTC and I'm sure that if there's a place where there's people that know well the HTC devices, it's here.
I have the same problem. I'm going to use a sd card to reflash my HW6515. Did u solve the problem?
Not really... I sent it back for repair...
Not really great because this mean I'm 2 months without my PDA
You can also check this thread at BuzzDev :
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&catid=28&id=23221#23221
Fuzy said :
PS.
When flashing sometime the process stop at1%. I hard reset and started flashing again. Finally after repeated trials, flashing was successefully. So, try to insist.
fuzy
Click to expand...
Click to collapse
Hi!
It's the first time I'm posting here, but after some days of search, I've found a lot about upgrading / downgrading, but nothing about my problem.
I've an MDAcompact / T-Mobile PM10A / Austria and tried to upgrade to BigStorage-Rom according this thread: " Magician to 1.13 + 1.13 Radio + BigStorage ALL-IN-ONE Guide ". I've backed up my original Rom, but after the flash, there was no radio-stack at all (booting device: "no GSM" on display).
I've tried to update the radio-stack again - error message: 114 - error upgrading radio-stack, the same with 1.12 and 1.13. I've tried to downgrade the rom to 1.12 - ok, but no radio-stack. I've tried to restore the original Rom via SD-card in bootloader-mode - device says: not allowed.
Can anyone help me?
Thanks in advance!
did u try to use an origional rom? i mean a non Bigstorage rom upgrade ? because that should fix the problem ( atleast i think it shoud)
Try Downloading the origional t-mobile1.13 rom and upgrade ur device using that install file . If i am not mistaken the first thing that is upgraded is ur radio stack then the extended rom and finally the operating sytem ( if u upgraded u would see that it does it in 3 steps).
I've tried that. As soon, as I upgraded to the original rom from T-Mobile, it stopped at the radiostack-upgrade. After that, I opened the "original".exe-file from T-Mobile with winrar and tried to upgrade again, but without the "radio.nbf"-file, what was no problem. After that, I tried to update with the "radio.nbf"-file (stand alone) again, but the "error 114"-statement came up again.
I got this error before, but only because I flashed my device with the wrong ROM.
(...I once misread "Universal" as a meaning and not as a device codename, and flashed the wrong Radio stack. Thing worked, but radio invalid, no phone capabilities. Fortunately, a reflash with the correct radio ROM found here saved me. And my $300 investment. -.-)
Either the radio part of the ROM's accidentially corrupted (download again), or the radio driver is incompatible with your device hardware. I'm not aware of Minis being avaliable in anything other than GSM tho...
I downloaded the original rom-version from the official T-Mobile website. Fact was: up/downgrade of the rom itself "ms_.nbf/nk.nbf" no problem (I've extracted the exe-file via winrar to a folder and made that several times to up/downgrade), but update of the radio-stack "radio_.nbf" not possible, ended in error 114. The point is: as soon as I start the update-utility, it shows the "Device CE Image version", "Device Extended Image Version" but no "Device Radio Image Version", it looks like no radio-stack is installed at all.
I got that exact same error through the aforementioned Universal ROM debacle (-.-). Radio failed to flash, no radio at all.
There should be a standalone radio stack somewhere in the FTP for magician. I know I saved mine with the 1.12.00 version. Try flashing with that, there's a file inside that allows you to bypass the version detection IIRC (which allows a from-scratch flash). Flashing a standalone radio stack will hard reset your system, but otherwise will not touch anything else.
I am currently using Shadow 2 by cloudyfa,everything's ok except for the phone not ready" problem.I heard that many other device users have this problem and that it might be related to a not-fully-recognized simcard.
I can make phone calls,send sms etc but when I want to change the phone settings,I see this message.
Can it be about the radio version? Mine is 02.47.21.
Thanks in advance.
I'd suggest:
1) Checking the SIM card is connected
2) A different Radio ROM (2.19.21 is normally the best)
3) Flashing a different ROM.