Related
I was wondering if there was a program that would allow me to turn on my phone and turn off my phone at set times. I frequently turn off my phone in the evening to prevent it from waking my family, but I frequently forget to turn my phone back on (or forget to put the ringer volume back up to audible levels). I had a suggestion in the past to use MortScript, but I don't know how to create a UI, nor do I know which registry settings I need to alter, or how to time the events. There is a smartphone edition called SleepWell, but it doesn't work on WM5 phones (I have an 8125). I was wondering if anyone might be able to direct me in the right place. Thanks.
I hope I haven't placed this on the wrong forum. Does anyone know of a program as described above or know how to write a script for Mortscript that would accomplish the above? Thanks.
To everyone using TomTom not just in your car !
Is it possible to stop the auto minimize of TomTom's windows when you turn OFF then back ON your PPC screen ?
I know I can revert back to TomTom from the tray icon, BUT it is very annoying and boring to do that ! When you use your PPC outside your car, you often want to check just for a few second your PPC to check that you are on the right direction ! you do NOT want to have your PPC always ON !
And you must also consider a power limitation, when you are on foot, you do not have a car battery next to you to power up your PPC, so it is essential to be able to turn ON/OFF your PPC screen to save battery life.
-> but TomTom's window always disappear in that process, how to avoid this !
Good question. I'd also like to know this. Sometimes I get on a 30 mile straight or stuck in traffic, so could do with turning the screen off to save energy
I'm afraid this isn't a solution, but a quick workaround would be to set one of your ftouchflo gestures to tomtom. Then you could maximise it with a simple sweep.
jez83uk said:
I'm afraid this isn't a solution, but a quick workaround would be to set one of your ftouchflo gestures to tomtom. Then you could maximise it with a simple sweep.
Click to expand...
Click to collapse
Yes, a workaround, I have tested it but surprisingly it TomTom does not come back immediately like any other program when they are minimized !
It takes about 2s to comes back.
That's annoying when you are on foot and you just want to turn on the screen to check if the direction is ok.
Maybe if I remove go to tray icon of TomTom, it will no longer minimize after every switch OFF/ON of the screen.
Does anyone know how to stop TomTom tray icon feature ?
Slightly off-topic
Any way to stop ActiveSync when TomTom is launch?! Minimize I can live with, but ActiveSync is more annoying.
Has someone an idea, what causes Tomtom to minimize every time you turn OFF/ON the screen display ?
I would like to do a skschema script to fix this. But I need to investigate what causes this minimization ?
bump
I too am trying to find out if its possible to prevent tomtom minimizing and stay running when the backlight is turned off. Other GPS programs i use stay running and dont minimise as well as other programs in general so i am assuming its some kind of power saving function of tomtom. Im assuming it changes something or monitors something to auto minimize itself when it sees the backlight go off.
Hallo, i,m new here and i hope my message will go ahead.
So far I made following observance.
Today i nstalled a new beta version of mortPlayer V3.31 b75.
After i had installed mortplayer and it is running then TomTom does not minimise. after deactivating my HTC 7500; WM6 Tomtom 7
Perhaps it will show equal behavior on other systems
Good luck
nope, still minimizes and stops using GPS when screen goes off even with this version of mort installed. Maybe share the settings so i can see if how you have it set works for me.
Tomtom minimising
even on my Dell x51v TomTom does not minimise when I turn off for a sleap,If you mean the GPS mode shouldn´t be turned off while sleaping , so am I not sure wether it is possible,and even if it is ,it would drain battery .
What i mean is, i want TOMTOM to stay running while the device has the screen turned off. This way it will save battery life as i cant look at the screen while im on the motorbike.
Same Here
I also would like TomTom to behave like other application.
Because it goes to the tray:
- you have to try to hit that small icon in the tray with your finger, or pull out the stylus
- you can not use that Alt-Tab, to switch away and back
- it does not show up in task manager
- if you assign a button to it, it take a few seccond to show up (but it's instant when you hit the tray icon)
- waste Today screen space...
So like the others, I would appreciate help on changing that behavior.
Thanks in advance
I want to use my TouchPro for tracking a long route i will be travelling shortly. When I turn of my device using the button on top when using a gps tracking-tool, the gps will disconnect and need to search for satellites again after turning on the device.
Does anybody know a trick (maybe in the registry) to keep the GPS alive?
I am also curious about this.
Finally I managed to find this thread!!! I am also facing this problem and was wondering if there was anyway to prevent the GPS from closing and losing connection with satellites when the phone goes into sleep mode. Anyone with any ideas PLEASE HELP!!!
Btw I am using TomTom Navigator 7 with Australian maps...
camielkb said:
I want to use my TouchPro for tracking a long route i will be travelling shortly. When I turn of my device using the button on top when using a gps tracking-tool, the gps will disconnect and need to search for satellites again after turning on the device.
Does anybody know a trick (maybe in the registry) to keep the GPS alive?
Click to expand...
Click to collapse
I seem to recall that TrackyPro has a function which will turn the screen off whilst still tracking the route. Is that the type of thing you're looking for?
Well basically I just want the GPS to still have the lock on the satellites EVEN when the device goes into standby. It's frustrating when after 3 minutes (my settings for power management) the device goes into standby and you realise that the GPS is closed when you turn it back on. So yup, as you said correctly, I want the GPS to still function even when the screen is off. Please guide me to wherever I can get the solution as I use alot of GPS!!!
All good GPS software should have option to keep device on all the time while GPS fixed.
I dont think it's possible to keep GPS on while device is on standby mode. Anyway, GPS should stay on even if screen light is turned off for power save.
Well I am using TomTom Navigator 7 with Australian maps, and I have tried looking at the options in TomTom and I couldn't find any setting to keep the screen turned on while GPS is working. And you are correct in that applications such as GPS and Bluetooth are impossible to stay running when the device goes into standby, as this feature is an OEM feature in all Windows Mobile devices to save power. The only way out I see, is to go to Settings>System>Power>Advanced and untick 'Turn off device if not used for...' This way the backlight can be turned off (which saves power) but the device itself is not totally off. This method will still consume power since the device is technically not in standby, but it's probably the best we can get since there is just no way to have GPS to function with the screen totally off ie in standby.
avantgarde84 said:
Well I am using TomTom Navigator 7 with Australian maps, and I have tried looking at the options in TomTom and I couldn't find any setting to keep the screen turned on while GPS is working. And you are correct in that applications such as GPS and Bluetooth are impossible to stay running when the device goes into standby, as this feature is an OEM feature in all Windows Mobile devices to save power. The only way out I see, is to go to Settings>System>Power>Advanced and untick 'Turn off device if not used for...' This way the backlight can be turned off (which saves power) but the device itself is not totally off. This method will still consume power since the device is technically not in standby, but it's probably the best we can get since there is just no way to have GPS to function with the screen totally off ie in standby.
Click to expand...
Click to collapse
I don't think that TT has the option you need - it takes its power options from the device (including screen brightness). That is probably because TT probably thought most people would have their device plugged in whilst navigating given the power required for navigating with the screen on.
I find that another side effect of this is that if I am driving on a bright day, I need to turn off the auto light level feature of the Raph to make sure the screen is as bright as possible.
avantgarde84 said:
Well basically I just want the GPS to still have the lock on the satellites EVEN when the device goes into standby. It's frustrating when after 3 minutes (my settings for power management) the device goes into standby and you realise that the GPS is closed when you turn it back on. So yup, as you said correctly, I want the GPS to still function even when the screen is off. Please guide me to wherever I can get the solution as I use alot of GPS!!!
Click to expand...
Click to collapse
I think it's a matter of semantics, but it may help you find a solution faster:
What you need is a tool / solution / procedure that turns only the screen off WITHOUT putting the phone in standby mode. Try searching for that; if you include the whole GPS tracking wish then you might not find what you're looking for so quickly.
Good luck and let us know if you found something that works for you!
Just curious as to what tracking software is used?
Our free PocketReperion tool does keep the device from entering standby mode.
It's free software.
We just lauched a special version for the Raphael, v.1.53
Coolest thing is that you canupload audio / video / photo's and people who are trascking you (live) will see all the content you upload, on the spot that you uploaded it.
get the free client here :
http://www.reperion.com/newclient
be sure to register for a free account first, read the readme in the directory above
EDIT : SUPPOERTED MAPS :
Google Earth
Google Maps
Google Maps Mobile
Virtual Earth
Virtual Earth Mobile
Mappoint 2009
Yahoo! Maps
MapQuest
checkout the example at http://tracker3.reperion.com/wrldmap.aspx?name=d-8498
BETA : http://www.reperion.com/beta
Coromoto said:
I think it's a matter of semantics, but it may help you find a solution faster:
What you need is a tool / solution / procedure that turns only the screen off WITHOUT putting the phone in standby mode. Try searching for that; if you include the whole GPS tracking wish then you might not find what you're looking for so quickly.
Good luck and let us know if you found something that works for you!
Click to expand...
Click to collapse
As far as I always remembered, the only time the screen can be turned off is when the phone goes into standby. In other words screen off=standby and vice versa and no other way to breakup this association. The option I have considered is what I have mentioned above, ie just letting the backlight turn off, but NOT turning the device off. But this will be a problem if you need to look at the screen constantly for navigation and cannot survive with just voice navigation. If you really do need the backlight to be turned on all the time, then go to Settings as well and untick the TUrn off backlight option too. Power will be gone in no time, then you probably will need to consider a in-car charger then...
lucid said:
Just curious as to what tracking software is used?
Our free PocketReperion tool does keep the device from entering standby mode.
It's free software.
We just lauched a special version for the Raphael, v.1.53
Coolest thing is that you canupload audio / video / photo's and people who are trascking you (live) will see all the content you upload, on the spot that you uploaded it.
get the free client here :
http://www.reperion.com/newclient
be sure to register for a free account first, read the readme in the directory above
EDIT : SUPPOERTED MAPS :
Google Earth
Google Maps
Google Maps Mobile
Virtual Earth
Virtual Earth Mobile
Mappoint 2009
Yahoo! Maps
MapQuest
checkout the example at http://tracker3.reperion.com/wrldmap.aspx?name=d-8498
BETA : http://www.reperion.com/beta
Click to expand...
Click to collapse
Thanks mate, will give it a test and see how it goes...
Hi, first post for me
I have wanted to do exactly the same thing, that is, keep the GPS tracking on my HTC Touch Diamond with the phone in "off" mode. The only way I have found to do it, is this; play music via a Bluetooth headset (you can pull out the jack-plug too, so no actual sound is heard). Now when you turn the phone "off" the GPS will continue to track.
There probably is some simple software out there that would work better, but this is my solution
Cheers
Perhaps this helps...
Go to HKLM\System\CurrentControlSet\Control\Power\State\Suspend
and create a DWord value named NAV1: with value decimal 0 (0 means power on and here is a complet list of values)
This allos HTC GPS driver to stay on on suspend mode. I think this allows any application accesing GPS to get data while the PDA is off.
Can someone test it and report back?
If this works, i can create a CAB to easily deployment.
Cheers
Cheers
jcespi2005 said:
Perhaps this helps...
Go to HKLM\System\CurrentControlSet\Control\Power\State\Suspend
and create a DWord value named NAV1: with value decimal 0 (0 means power on and here is a complet list of values)
This allos HTC GPS driver to stay on on suspend mode. I think this allows any application accesing GPS to get data while the PDA is off.
Can someone test it and report back?
If this works, i can create a CAB to easily deployment.
Cheers
Cheers
Click to expand...
Click to collapse
Hi there, thanks alot for your discovery, will surely test it out later. With TomTom Navigator that I am using, once you have planned a route and it starts to navigate, the screen stays on forever. What I said earlier in my previous posts are irrelevant since TomTom just keeps the screen on and never dims the backlight nor turns off the device. So unchecking the Turn Off Device after XX mins is useless. Anyway we need some fix which can 1) Allow us to turn off the screen to save power but still have TomTom running and giving us navigation instructions and 2) Does not disconnect from satellite fixes when device is put into standby.
Your reg edit sounds like it will work, but will have to confirm it first. A cab file will be really appreciated. Cheers!
EDIT: preliminary testing: Turned on GPS outdoors, managed to get a satellite fix. Did not plan any route. Turned off screen (ie standby), turned back on, GPS signal was lost. Had to wait few seconds to reconnect to the satellites. Unsure about voice navigation while screen is off but since when I turned the screen back on the signal was lost already I don't think there will be any navigation when screen off. In short --> DOESNT WORK.
I didn't read through everyone's response, but what about just using a car charger, and setting the power settings to never turn off when turned on? You can turn down screen brightness if you're worried about the screen itself, but that should keep you connected at all times, and the battery should remain charged as well.
This also avoids registry tweaks that may have side effects. Simple, and painless in my mind.
avantgarde84 said:
EDIT: preliminary testing: Turned on GPS outdoors, managed to get a satellite fix. Did not plan any route. Turned off screen (ie standby), turned back on, GPS signal was lost. Had to wait few seconds to reconnect to the satellites. Unsure about voice navigation while screen is off but since when I turned the screen back on the signal was lost already I don't think there will be any navigation when screen off. In short --> DOESNT WORK.
Click to expand...
Click to collapse
The change of NAV1: only affect to GPS device, so perhaps the nav software need more devices to stay on to work (or really the soft changes the power state of devices itself). I tested the changes above with HTC GPS Tool and seems to work, but seems navigation software are not the same... sorry.
Cheers
I'am using the IGO8 Navi Software on my Touch Pro.
I ride by mountain bike often and today I wanted to save the track I normally ride.
I turned on IGO 8 and get a satellite fix and started riding, when I came to my first check point I realised that on stand by mode, the IGO8 wasn't getting satellites.
So I minimised the IGO8 and I had the today screen on. I unticked turn-off device and turned the keylock on.
This was my only solution, it would be great to have the GPS running when switched off.
doublecheese said:
I'am using the IGO8 Navi Software on my Touch Pro.
I ride by mountain bike often and today I wanted to save the track I normally ride.
I turned on IGO 8 and get a satellite fix and started riding, when I came to my first check point I realised that on stand by mode, the IGO8 wasn't getting satellites.
So I minimised the IGO8 and I had the today screen on. I unticked turn-off device and turned the keylock on.
This was my only solution, it would be great to have the GPS running when switched off.
Click to expand...
Click to collapse
Trackme has a GPS powersave mode which allows the screen to be turned off but will still record your track. http://forum.xda-developers.com/showthread.php?t=340667
Thanks
Let me check it out.
I have a windows mobile programming question:
I'm trying to write an application that will turn the phone to vibrate during a specific time of the day (when I'm at work). The problem I have is that when the phone goes to sleep my app apparently goes to sleep also. So my timer doesn't keep ticking to check if it is time to go to vibrate. Is there a way to keep my application running while the phone is in sleep mode so that the timer tick event is still called?
I would really appreciate any help, this is my first windows mobile app and don't know the intricacies of coding for windows mobile.
You may try the Unattended Mode...
http://blogs.msdn.com/windowsmobile/archive/2004/11/29/271991.aspx
like this?
http://forum.xda-developers.com/showthread.php?t=472878
imho, it's better to use the notification queue than have an application run in the background.
oldsap said:
like this?
http://forum.xda-developers.com/showthread.php?t=472878
imho, it's better to use the notification queue than have an application run in the background.
Click to expand...
Click to collapse
That's pretty much exactly what I'm doing. Though mine has a more graphical UI and is more touch friendly. I've finished everything except that when the phone falls asleep my timer event is not called to change the volume setting.
A_C said:
You may try the Unattended Mode...
http://blogs.msdn.com/windowsmobile/...29/271991.aspx
Click to expand...
Click to collapse
I'm a little confused by that article. Do I catch the event that the phone is falling asleep and then set it to unattended mode? Or is it that I would set it to unattended mode, and whenever the phone is supposed to fall asleep instead it goes to unattended mode?
So as some of you may know there is an app for android called Tasker and it is by far the most powerful app out to date.
"Tasker is an application for Android which performs Tasks (sets of Actions) based on Contexts (application, time, date, location, event, gesture) in user-defined Profiles, or in clickable or timer home screen widgets.
This simple concept profoundly extends your control of your Android device and it's capabilities, without the need for 'root' or a special home screen"
As powerful and amazing as this app is, it's pretty hard to use unless your very tech savvy and I have been searching the Net for some how-to guides but their doesn't seem to be much out there. So I wanted to create this thread and have people post their own little tips/mods that they have set-up with Tasker so that newbies such as my-self can have a place to go if they need help getting Tasker to perform certain functions.
I just download the app last night and haven't had much time to mess with it yet, but once I get the hang of it I will start posting what I'm doing.
Anybody that uses Tasker please feel free to add on to the thread and lets make this the ultimate "How-to" guide for people trying to unlock the full potential of this amazing app.
How long did it take you to develop this app?
Sent from my PC36100 using XDA App
firemedic1343 said:
How long did it take you to develop this app?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
@OP, one that I made that I find useful scans the SD card for new media whenever it's mounted.
PROFILE:
Event - Card Mounted (Priority: Normal, Card Title: <blank>, Frequency: 1)
Task - Media -> Scan Card
Task - Alert -> Flash (Text: Scanning for new media..., Long: <unchecked>, If: <unchecked>)
This one turns off the lockscreen when using Music or Pandora (you have to make two separate profiles!)
PROFILE:
Application - Music/Pandora
Task - Display -> Keyguard (Set: Off, If: <unchecked>)
I also spent a lot of time developing a task that would turn airplane mode on for 45 minutes, turn it off for 15 minutes, then turn it back on and repeat until stopped. Everything works except Tasker stops all timers when the phone sleeps, so unless I want to put a partial wake-lock on it (which would defeat the whole battery-saving purpose of the profile in the first place), it doesn't work
Gregalous said:
@OP, one that I made that I find useful scans the SD card for new media whenever it's mounted.
PROFILE:
Event - Card Mounted (Priority: Normal, Card Title: <blank>, Frequency: 1)
Task - Media -> Scan Card
Task - Alert -> Flash (Text: Scanning for new media..., Long: <unchecked>, If: <unchecked>)
This one turns off the lockscreen when using Music or Pandora (you have to make two separate profiles!)
PROFILE:
Application - Music/Pandora
Task - Display -> Keyguard (Set: Off, If: <unchecked>)
I also spent a lot of time developing a task that would turn airplane mode on for 45 minutes, turn it off for 15 minutes, then turn it back on and repeat until stopped. Everything works except Tasker stops all timers when the phone sleeps, so unless I want to put a partial wake-lock on it (which would defeat the whole battery-saving purpose of the profile in the first place), it doesn't work
Click to expand...
Click to collapse
Both setups seem very useful, ima check them out. Thanks for the input!
About the one you can't get to work. I'm pretty sure I actually saw something similar to it the other day on another website, not 100% sure though. I think it was a profile that allowed you to basically turn off all of you're data and have it come back on for a short period of time to gather texts and stuff...
Ima going to look for it for you to see if i can find it...
In the mean time I found a few useful profiles here http://lifehacker.com/5606284/three-handy-tasker-profiles-from-our-readers
I would post them but theres actually quite a bit if you look in the comments and the post itself.
Once I think of something "original" i'll post it
You also might want to check the official Tasker pages. There is also a Wiki with step-throughs (link on left side of main page).
http://tasker.dinglisch.net/
This is the only app I have been able to find that will let you remotely turn the GPS on. IMO that alone was worth the money, now I don't have to waste time writing an app for it.
I've been working on something to activate the GPS and send the phone's location, available wifi networks, etc, over a text message. Haven't figure out how to make it update the GPS location or turn on 3G yet though. Anyone know anything about android bridge scripts and if they would be able to do this?
Vegasden said:
You also might want to check the official Tasker pages. There is also a Wiki with step-throughs (link on left side of main page).
http://tasker.dinglisch.net/
Click to expand...
Click to collapse
Wow. thanks a lot for the link. i have been looking for some sort of wiki or help for tasker for a while now but apparently I wasn't looking in rite places.
Thanks again.
Also, Mobile Defense, if installed in system apps allows you to remotely turn on gps and track your phone, however, they have temporarily closed down the beta. I've always had it on my android phones and it's pretty amazing. Much better than lookout for tracking your device.
tasker is a great app. i use it on a dialy basis. save so much battery life
SiL3nTKiLL said:
tasker is a great app. i use it on a dialy basis. save so much battery life
Click to expand...
Click to collapse
What works for you? Some example scripts please please. thanks.
Here is more info on tasker setup.
I tried some of these and they worked great.
http://lifehacker.com/5601133/push-...d-to-awesome-heights-with-these-tasker-setups
http://lifehacker.com/5599116/how-to-turn-your-android-phone-into-a-fully+automated-superphone
maps to start gps and gps logger
hi everyone,
i'd like to start maps, and have:
- Gps turned on
and
-an app called GpsLogger to start.
The problem i get is that, once Gps is turned on and GpsLogger is opened, if i get back to Maps by long-pressing the home button the whole automation starts again, leading me to GpsLogger again..
Could anyone help please?
Thanks!
I downloaded Tasker the other day to accomplish one thing only. I wanted my wife to be able to get through to me whenever she called me. I work shift work so my phone is set to Silent at odd times when I am resting, so the various dings and rings don't interrupt my sleep. Fearful of her not being able to get a hold of me in an emergency, I set this up:
Profile: Priority Call (named by me)
Context: Incoming Call - Very simply, I used the magnifying glass to select her contact from my phone, and it input her name in the box.
Task: Silent Mode - Mode set to OFF
This profile checks all incoming calls and then turns Silent Mode OFF and allows the call to ring through. When the call is done, the phone returns to Silent Mode. NOTE: I also had to set up a separate task to turn the phone to silent in the first place. For some reason, Tasker would not recognize the phone as being in "Silent Mode" if I used the volume down button to put it in silent mode. So I just added a shortcut to the Tasker task of putting the phone to silent on my homescreen. Now when I go to bed, I hit the shortcut and I am able to be undisturbed until I wake again, unless my wife calls. I could see this being very useful for people with teenagers that are out or babysitters with children.
This task can also be useful if you sleep at defined hours, because you can set the phone to automatically turn to silent at X hour, and turn silent mode off at X hour. Just some ideas.
I am now searching for ways to completely automate the phone by making it turn on my GPS and Bluetooth when I am away from home, as well as turn these off and turn my wifi on when I am at home. Several attempts with no knowledge of this app have been unsuccessful so far. More to follow.
Robert
OnDutyTactical said:
I downloaded Tasker the other day to accomplish one thing only. I wanted my wife to be able to get through to me whenever she called me. I work shift work so my phone is set to Silent at odd times when I am resting, so the various dings and rings don't interrupt my sleep. Fearful of her not being able to get a hold of me in an emergency, I set this up:
Profile: Priority Call (named by me)
Context: Incoming Call - Very simply, I used the magnifying glass to select her contact from my phone, and it input her name in the box.
Task: Silent Mode - Mode set to OFF
This profile checks all incoming calls and then turns Silent Mode OFF and allows the call to ring through. When the call is done, the phone returns to Silent Mode. NOTE: I also had to set up a separate task to turn the phone to silent in the first place. For some reason, Tasker would not recognize the phone as being in "Silent Mode" if I used the volume down button to put it in silent mode. So I just added a shortcut to the Tasker task of putting the phone to silent on my homescreen. Now when I go to bed, I hit the shortcut and I am able to be undisturbed until I wake again, unless my wife calls. I could see this being very useful for people with teenagers that are out or babysitters with children.
This task can also be useful if you sleep at defined hours, because you can set the phone to automatically turn to silent at X hour, and turn silent mode off at X hour. Just some ideas.
I am now searching for ways to completely automate the phone by making it turn on my GPS and Bluetooth when I am away from home, as well as turn these off and turn my wifi on when I am at home. Several attempts with no knowledge of this app have been unsuccessful so far. More to follow.
Robert
Click to expand...
Click to collapse
Here you go...
These two pages on the Tasker Wiki will show you how to do a lot of what you want, and even find stuff you didn't know you needed.
http://tasker.wikidot.com/profile-index
http://tasker.wikidot.com/step-throughs