Database Info

I ruined my VOX! I need HELP!

My vox keeps on restarting when the microsd card is inside, and when it's outside its just doesn't getting to the home screen. It's getting stuck on the second HTC logo.
It is after I did soft reset to my device after I used the SDA_ApplicationUnlock and the new comm manager style (list):
http://forum.xda-developers.com/showthread.php?t=355490
I've tried hard reset:
http://www.modaco.com/index.php?showtopic=255861&mode=threaded
And it doesn't seam to work... ):
When I push all the 3 keys altogether when the VOX is off the phone doesn't even turn on, just pushing only the power button turning the VOX on.
So, how can I rescue my VOX?
By the way, I soft reset my VOX by pulling outside the SIM slot and then pushing it back inside.

to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
good luck

Nothing happens… only when I press just the power button the phone turning on.
Maybe I don't know what are the two softkeys?
Help!

the sokt keys are the 2 keys between the home and back keys and the d-pad, ie the keys above "1" n "3"
hth

Well, I was wrong about the two softkeys. But its still doesn't seem to work.
When I follow the instruction above the phone is turning on, as usual, but nothing else happens (the phone still gets stuck at the second HTC logo).

when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed

Still doesn't work, its continuing to the screen with the "windows mobile" logo.

I had the same promblem, fixing by removing SIM and go ahead
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed untill...
5. a black screen will aprear with some white text asking for hardreset confirmation.
Greetz BAUr SImon

Hi It still doesnt seem to work with me.
Because i have the same problem and i tried to do all the things from above.
This is bad. man my phone doesnt work.

That's strange, if the phone can go as far as the second htc screen I thought it should be able to hard reset.
Also make sure usb cable is not plugged in while you try to hard reset. I just tried it and I don't get the white text on black screen when I have the cable in.

ן succeeded in doing a HR a couple of days ago, but I forget to write it down here.
The instructions are:
1. Take out the battery of 5 sec.
2. Put in the battery.
3. Press the two soft keys (above 1 and 3), and don't stop pressing.
4. Press the power button. The sec the green light blink, next to the HTC logo, you remove your finger from the power button (this is what no one told me).
5. You are asked to press the SEND button to confirm the HR.

lastOne said:
to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
Click to expand...
Click to collapse
lastOne said:
when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed
Click to expand...
Click to collapse
are you sure nobody told you that ?

Sorry, let me rewrite myself:
I didn't fully understand this instruction, and if I didn't understand it good enough maybe other people would understand it as me. So I wrote a farther instruction.

Help! MY MDA does not boot

Hi,
I have upgraded my MDA to NO EVIL ROM Windows mobile 6 version from this forum. Device was working great for couple of weeks. Now suddenly it stopped booting. When I do soft reset the
S.N.E ... Presents screen comes up.
Then HTC Wizard screen comes up
The Touch No Evil screen come up and then it stays at the same screen. It does not respond even to power button now.
The radio light (green light) blinks. The system does not respond to even hard reset.
I am tosed. Please help. Any response to recover from this situation is usefull.
Thanks in advance...

From the sounds of it, something you have installed or configured isn't allowing the phone to finish booting. You basically have 2 choices at this point... Hard Reset or Reflash the phone.
When you say hard reset doesn't work, are you sure you are doing a hard reset? Pull the battery out and let the phone rest for a minute or so. Press the power button a couple of times (yes with the battery out) to discharge any power in the device. Then put the battery back in, and press the top two buttons on either side of the phone (Comm and Record), and while holding those in press and release the power button. After a couple of seconds you should have a black screen with white text asking you about resetting the phone. Press the Send key (the green phone key that you use to answer the phone) and you will have completed the Hard Reset. If you get errors then you need to tell us what they are. If you never get the black screen with white writing then you aren't holding the buttons down correctly.
To reflash the phone, put it in bootloader (press and hold the recorder button while pushing in and releasing the reset button (or while turing the phone on)). Once you get the tri color screen, hook up the USB cord and it should say USB in the lower left. Now you can flash it (even though the phone won't connect to ActiveSync).
Good luck and hope that helps.

Able to reboot
Thanks for the advise. After several tries, was able to hard reset and started booting and working OK.
I have not done any soft reset after this event. What should I look for to correct, if any errors.?. do you recommend that I reflash the ROM?. The only software, I had installed was Microsoft Voice recorder. I have not installed the same after the reboot.
Thanks

ANother issue
Now after resetting, I see my phone getting into vibration mode all the time. Even if I set to ring mode, it will automatically go back to vibration mode after some time. Any idea on how to fix the same?.
Thanks

Cannot hard reset s720

Hi all,
I recently purchased a Telus S720 off of eBay and it's prompting me (in French) for a password to unlock the device. I don't know this password and the seller doesn't either, so the logical step is a hard reset. I read on HTC's website that I can hard reset the S720 with these steps:
Power the device off. Press and hold the left and right soft keys. Power the device on while holding these keys. Follow the on-screen prompts to factory reset the device.
Click to expand...
Click to collapse
This does not work. I take the battery out, hold both soft keys, then hold the power button until the device vibrates to indicate it's powering on. I continue to hold the soft keys, and it boots into Windows. Am I doing something wrong here? I've tried these steps on both the number pad and keyboard.
Thanks for any help that anyone can provide.
*edit: I got it to go after charging the battery for a while.

kindly gude me how do i flash this handset s720.when switch on hangs on htc logo, kindly assit me

shoeb7 said:
kindly gude me how do i flash this handset s720.when switch on hangs on htc logo, kindly assit me
Click to expand...
Click to collapse
HTC VOX Hard reset with keys
Turn off your phone, then press both SOFT KEYS and press POWER button.
Release SOFT KEYS.
Press the GREEN PHONE button for hard reset confirmation.

Hard reset

i'm no idiot (at least that's what she tells me... lol) but i hold TomTom and PIE button down while i press the reset button on the bottom of the phone to do a hard reset, correct?
if so, my phone must not want to do it because i've done this a million times today and it just boots up normally as if nothing was pressed.
what to do... what to do?
thanks!

After the reset don't release those buttons until, the reset screen appears...

gnick666 said:
After the reset don't release those buttons until, the reset screen appears...
Click to expand...
Click to collapse
i have been. it still ignores the fact that i have been pressing the button and boots right into windows.

How do I hard reset my fuze?

I've been trying this over and over and all I get is the initial bootup screen.
I hold down the Volume Down, Enter (center circle button) and then use the stylus to hold down the Reset button. I hold all 3 down at the same time.
Every time I do this the phone reboots as if I only pressed the reset button using the stylus.
I've tried holding all 3 down for over 5 seconds and I've also tried releasing the reset button first and continuing to hold down the Volume Down and Center/circle button (which is the way described here on xda) and all it does is do what I believe is a soft reset.
Shouldn't I be seeing a screen saying it's going to delete all data?
What am I doing wrong?
EDIT: I should mention, I just finished installing TAEL's new rom ([ROM][WWE][PRO|FUZE][WM6.5.5.5|23518][14JAN10] TAEL ROM v3.23518 • SENSE EDITION • ), which is a windows mobile 6.5 rom, but every time I try the hard reset it's showing windows mobile 6.1. Although it does show TAEL rom at the initial screen where it also shows the wrong windows mobile version.

hard reset fuze
You must keep holding the volume up and the circle button pressed AFTER you remove the stylus. this should take you to the RGB screen and then instructions on how to continue.
Good luck

Actually, that method didn;t work for me either.. but this one did...
Take out the battery... put the battery back in...
Press and hold the CENTER BUTTON and VOLUME DOWN... While still pressing them press and hold the POWER button. Then you will get a screen saying press volume up to hard reset...
I hope that works for you

That was so easy! Thanks.
Teej53214 said:
Actually, that method didn;t work for me either.. but this one did...
Take out the battery... put the battery back in...
Press and hold the CENTER BUTTON and VOLUME DOWN... While still pressing them press and hold the POWER button. Then you will get a screen saying press volume up to hard reset...
I hope that works for you
Click to expand...
Click to collapse

Xino1 said:
You must keep holding the volume up and the circle button pressed AFTER you remove the stylus. this should take you to the RGB screen and then instructions on how to continue.
Good luck
Click to expand...
Click to collapse
Many people often let go of the buttons before it turns back on.
Note: You can release the reset button but still have to hold Vol Down and Center to get to the Bootloader.