I dont know why my phone is going this but every time i change the orantaion of the screen by g-sensor or slide the phone goes to the home screen. so when i want to use the keypad in opera or to text i have to select it in the taskmanager to open it back up. i dont think my phone did this before and i havnt been playing with any settings. does anyone have any idea on what could be causing this it driving me nuts.
it may be an event triggered in G-sensor? i use gryator, so i don't have this issue. try unintalling g-sensor and see if that's the problem
it turned out to be a instaled program called "Start Menu Cert."
Related
Hey guys
New to TouchFlo - got it installed yesterday.
Having an issue though.
When I open it, by clicking the taskbar button, or in Start, it opens up.
When i want to go back to Today screen, I swipe up on it to toss it away, or even if i hold the right taskbar button to close it, it goes away.
If i try to access it again, nothing happens. screen stays on Today, but is not functional unless i press the END key, as if an invisible FLO is over the screen
Whats up here?
here is what i flashed yesterday
T-Mobile 2.26 ROM : MDA_software_update_226102_22610105_022511.exe
T-Mobile-UK_2.19.11_Radinly
NBD.v7.9
running old AT&T blue network on 8125
installed apps:
A_C Slide2Unlock
Xplore Keyboard
Today Agenda
Pocket Alarm
Nyx Password
Device Lock
Contact Manager
MhoairSofa Calendar+ Today Plugin
BatteryStatus (using this to overclock to 260mhz.)
PocketSoft ToggleBT
I had the iphone phonepad and stuff installed, but i couldnt figure out how to switch back to the Today screen without clicking SETTINGS, and still having iphone running. it was slow and laggy. any way around this?
thanks
I had same issue, only solution for me, was to stop using TouchFlo
Touchflo will only pull itself up the first time period...
Afterwards when you push the button to access it, it will appear nothing will happen... however if you swipe your finger as if you were turning the cube, it will infact go to the next page..... try it out
that is stupid!
any hopes of a fix?
The various versions of touchflo on wizard require you to press a button before getting touch to work. Depending on the ROM, this could be button 4 or left softkey.
HTC Tocuh has a video of Touch phone on their website. I see that even here, a button is pressed every time the touch features are accessed. This may be a feature of touch itself, rather than a bug in the way touchflo works on wizard.
kernelguy
danrw84 said:
that is stupid!
any hopes of a fix?
Click to expand...
Click to collapse
you can buy a touch.
man, think...
the touchFLO is hack for work on wizard....so is very hard to have this work perfect.
if you realy need the cube working 100% buy a touch
I think I am going mad so forgive me.
Can someone help me to rotate the screen to landscape with the keyboard closed? IE. manually rotate the screen.
I can't seem to find the function anywhere.
or have I missed something?
Thanks.
Just rotate the device?!
This only works in certain apps, like picture etc.
I want the Home screen, and TT7 in Landscape when in the car, and turning the screen doesn't do anything.
Any help?
The Apps themselves need to support the Rotation of the phone by implementing a hook into the Accelerometer/G-Sensor.
Like said above, TouchFlo3D Pictures and Opera do this, but most other apps do not! Just need to wait for later versions or change to landscape mode manually - if supported!
Should be (although HTC may have removed it) in Start->Settings->System (tab)->Screen, and then change the orientation. It's possible HTC removed this functionality though...
I'm guessing that Mortscript will still work on the Touch.
You could use this to rotate the screen then call the app in question?
Then when you quit the app it'll rotate back.
I forgot the name of the app, but it allowed you to rotate the Diamond for any app or any situation in the phone. It should also be able to work on the Touch Pro then.
Its called GSen it works on diamond and probably it should work for this and if its not working just wait for new release.
l3v5y said:
Should be (although HTC may have removed it) in Start->Settings->System (tab)->Screen, and then change the orientation. It's possible HTC removed this functionality though...
Click to expand...
Click to collapse
They have removed this option, but you can bring it back with Schap's advanced config 3.0! I haven't tried it, but I've seen the option there!
Reg Edit to set Talk key to rotate screen manually
Here's a reg hack to manually rotate your screen, only when desired.
In Settings/Buttons/ one used to be able to assign a button to <Rotate Screen>. This feature is hidden on the Touch Pro.
To get it back:
Using a Registry editor, go to:
HKeyLocalMachine/System/GDI/Rotation
Change the "HideOrientationUI" from 1 to 0
Now you can remap the talk key to do this on long press.
Pocketpowermanager puts a little icon at the bottom of the Today screen which rotates the screen (and an icon for power off, and another for soft reset). It's a great application.
Hi there
Both Gens and Gyrator work well on the Touch Pro.
Just Bing them (at bing.com).
David
You can get an application called gyrator 2 which will allow you to rotate without sliding out the keyboard in any screen, so like you can use it in the start menu or anywhere else, http://pocketnow.com/index.php?a=portal_detail&t=news&id=6068
Just wondering if anyone knows if there is a screen lock for Tomtom software. I have the polaris running V7 of tomtom. The problem is I use it with the motorbike and earpiece.
So basically I set the destination, drop it in my pockets and listen for directions however the screen needs to be active. If it looses focus or the screen goes blank then directions updates stop. Otherwise the screen keeps getting pressed while riding so directions get interrupted.
Anyway I can get around this. tom tom screen lock would be great.
Hi Dusty, I'm a biker too so I already faced (and solved) that!
There are two problems using TomTom as we need to use:
1. if Polaris goes in sleep mode (blank screen), TomTom looses focus and stops working;
2. random screen taps (typically wen you store your PDA in a pocket) can of course modify/interrupts itineraries.
To solve both of them, I suggest you not to use any third parties' screen lock.
Just do as follows:
set your battery saver off (so your Polaris never get sleep);
launch TomTom and choose your destination;
go back to WM without quitting TomTom (you can easily do that setting one of the hw buttons to launch "Today" screen);
use stock WM screen lock
enjoy your ride
Hi
Could you, please, explain what is "stock WM screen lock" exactly?
Does it a 3rd party application itself?
I have TomTom V6. I stops to respond when it goes to the system tray, which means that the trick with "Today" is not good enough for TT V6.
Regards.
PS. Correction: I was wrong, TomTom V6 works when in the system tray
The stock WM screen locker is an utility I've found preloaded on my Polaris so I do believe is a standard WM tool (see first picture, it's the red rounded icon).
I also have TT6 (see second picture) and it continues to work fine when I press the Hw button that brings me to "Today" (I assigned the "explorer" button, but you can configure any other Hw command).
Thank you very much, deepblue68
I was wrong, your advise works fine!
Best regards!
Hmmm
I think the key is disabling screen saver/poweroff which is what it will do when on the home screen.
I have re-felashed my phone now and can't find a lock function (do know what you are talking about. Sure its just a little menu option somewhere.
Ok new annoying problem. Has anyone noticed that when you call your voice mail by the time you are ready to delete the message the damn screen is off and you have to wake it back up with the power button?
Is there a way to keep the screen from turning off? or for it to wake up when you take it away from your ear?
Im guessing the light sensor is turning it off when its next to your ear so your face dosent "push buttons". Thats merely just a guess I really have no clue. I guess it could just be a timer thing.
its an option if you get advanced config in the diamond section you can adjust it
lbhocky19 said:
its an option if you get advanced config in the diamond section you can adjust it
Click to expand...
Click to collapse
I may be a moron (that's usually the case) but I installed the Advanced Config from touchxperience.com and I do not see this option. Is this the same cab that's in the diamond section?
-e
This is the same problem with Tilt
This was the same problem with the tilt and I'm amazed it is still in the fuze as HTC released a hotfix for the tilt. They must have known it was an issue all along.
Maybe the tilt hotfix would work on the fuze?
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
I didn't want to try it in case it had a undesired effect and i'm not setup right now to fix any issues...
I installed it the same advance config it shows the option on the list on the website. but its def not on the list on the phone. :-(
watching...
any new ideas?
search for diamond tweak or advance config.....the option is there. just disable sleep and fast sleep.
Can anyone verify that the latest Diamond Tweak will work on the AT&T Fuze default ROM. I know I can always hard reset, but I have my phone setup and working just about the way I want.
-e
i installed romeos i used advanced config and it worked
rzanology said:
search for diamond tweak or advance config.....the option is there. just disable sleep and fast sleep.
Click to expand...
Click to collapse
In Advanced Config > Phone > Phone Sleep During Call
And Advanced Config > Phone > Fast Sleep During Call
I have those both set to "Not Allowed"
Still, the screen switches off during calls...
Whoopage said:
In Advanced Config > Phone > Phone Sleep During Call
And Advanced Config > Phone > Fast Sleep During Call
I have those both set to "Not Allowed"
Still, the screen switches off during calls...
Click to expand...
Click to collapse
i used the Diamond Tweak and disabled both Fast Sleep, and Sleep.
Doesn't turn off during calls now.
I can confirm that Advanced Config on my stock Fuze does NOT have those options
Used Diamond Tweaks to do it
I emailed HTC support about this issue. Here is there response.
"We do apologize for your frustration, however there is no possible way to keep the screen lit up while on a call as it is like that for a purpose. the purpose is to avoid the pressing of the on screen buttons while on a call. If you would like to reactivate the screen while on a call you can simply press the power button and it will wake the screen backup."
It would be nice to have the phone behave exactly like an iphone during a call. Using the accelerometer to turn on and off the screen.
I already searched and found what I believe to be the diamond tweak you are all talking about...
But just to be sure, would someone mind linking to it, so I know I'm using the same thing that worked for you guys?
Thanks
I tried Diamond Tweak with my phone and it does not work for me.
Diamond Tweak works on my fuze.
This tip doesn't help the Fuze screen "stay on" but it can be used to at least turn the screen on easier while in call. Just hit the volume key (up or down) and the screen will pop back on. For a moment it shows the volume setting but then goes back to the home screen. I'm not using the TouchFlo shell so in my case it pops back to my home screen.
try a search in this forum for a file called No_Sleep_Raph
There is a catch you will loose mute phone on flip.
I would like to see this regedit as a program so you can turn it on or off rather then default on. Cause I keep hitting the screen buttons during a call
It works for a while after a softreset, then the buttons stops function (they animate, but don't open program, flip page, etc. only some buttons work), scrolling and swiping left right also stops working. Anyone else experiencing same problem?
Maybe started when i put in my own menues via registry, but i want my own menues
Know how to solve?