Hiho,
I have a Swisscom branded QTEK S200 atm running Dopod, but actually I'd like to install this:
GER_RUU_Prophet_215742_2157131_023021_QTEK.exe
But I get the Vendor ID Error and I didnt find a usefull way to trick it, should it be possible to install the ROM above?
Wheres the right Howto to remove that Vendor ID problem?
MY Qtek:
ROM: 2.15.13.27 WWE
ROM Date: 3/9/06
Radio: 02.19.21
Protocol: 4.1.23.09
ExtROM: 2.15.13.121
What is that with those G3 G4 chips, how do I find it out?
What else do you have to know to help me installing the ROM above?
How can I edit the registry, can I just connect with my regedit.exe on my computer to my qtek?
TIA!
Check the files on the ftp, i think there is a Update-Program that doesnt check the vendor ID.
And please upload the Rom
Edit:
http://forum.xda-developers.com/showthread.php?t=264509&highlight=vendor
http://forum.xda-developers.com/showthread.php?t=273114&highlight=vendor
Acutally I think I understand something wrong :-\
I want to upgrade my Qtek to the version I posted in that thread. But I get the error with the Vendor ID, mhh, ok.
The links u gave point to another ROM.
Erm, isnt that easy to understand...
Of course I'll upload as soon I get permission in the upload folder :\
As far as i understand the previous threads:
-Download the mentioned Rom with the NoVendorID Update Utility.
- then take your Rom you want to flash on your unit
- Proceed as described in the threads
Check www.phm.lu for a Registry editor on your device
You could upload to www.rapidshare.de ,then i would also try to upload to the ftp
Uploading it to radpidshare right now, will post link when done.
Mhh, so I downloaded that noVendor ID.
do I have to replace that nk.nbf? (extract it somehow from the exe installer I have?) or do I have to flash it twice?
1) with the noVendor rom
2) with my Qtek rom
sorry, i'm confused )
I would say (though i haven't done that before as i was also searching for the right rom) Unzip the novendorid rom and replace the .nbf file with the german qtek file.
At least worth a try
Mhh, there is the ROM:
http://rapidshare.de/files/34895878/GER_RUU_Prophet_215742_2157131_023021_QTEK.exe.html
Mhh, I'm wondering how to extract the .exe to get the *.nbf
Mhh....
If you have/want addme to msn: [email protected]
=)
Open the File with Winrar. You should be able to extract the files.
I do not use msn, sorry
BTW: Thank you for the ROM !
rom
ftp://xda:[email protected]_RUU_Prophet_215742_2157131_023021_QTEK.exe
the rom was already uploaded.
I know
It is the Rom Purp uploaded to rapidshare before.
Hello to everyone!
I have a stand alone QTEK S200 with:
ROM version:2.9.7.24WWE
Radio Version: 02.07.20
ExtROM version: 2.9.7.8009
and would like to do the following:
1. I would like to be able to see the extROM
2. I would like to extract somehow some CAB files from the extROM
3. I would like to be able to transform an application CAB file.
4. I would like to put again the trasformed CAB file into the Ext. ROM
Please does anyone know if and how can I do the above? Do I need some special tools for that?
Thanks for your time reading and responding!!
PS: I lloked everywhere for the above information, but I didn't manage to find something relevant!
Opening the ext ROM is easy:
Just get a reg editor and change the following values:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
Extracting cabs is as easy as just copying them out.
You can also change the cab contents with apps like CE Cab Manager, then copy them back. The only problem is signatures. Once you change the cab it looses its signature and you are prompted whether you want to install it or not.
I tried the MB edition on my Wizard and it's awesome.
The only little prob I encountered so far is linked to Wifi WPA2 / AES not available in the Wifi options.
Then read that by replacing tnetwln.dll with the one in the AKU 3.3 it would have worked. Even found a thread giving away the extracted dll. Thanks.
As I wanted to make it clean, thought about "cooking" with the tnetwln.dll replaced with the good one and discovered that in the extracted files there are two tnetwln.dll version in the MB edition.
Let me clarify. If you extract the MB you'll find two version of tnetwln.dll.
One in the root of the extracted modules and files and the other in OEM/OEMDrivers.
The one in the root is the same as the AKU 3.3
The one in OEM/OEMDrivers is different.
Any clue?
Thanks,
Ka.
Hello Kast,
I'm the one that posted the tnetwln.dll...
If you are about cooking a rom with the AKU 3.3 tnetwln.dll, you need first to remove the tnetwln.dll from the original WM6 ROM.
Here is the trick:
- in the rom, tnetwln.dll is actually a module, not a file. So you have to remove a directory from the exploded ROM,
- afterwards, just copy the tnetwln.dll from AKU 3.3 as a file in your ROM directory and rebuild the ROM.
While not perfect (I don't know how to turn a file into a module, so I could replace the tnetwln.dll original module by the one of AKU 3.3), the previous procedure is working fine.
Let me know if you need more help.
Regards,
eluth.
Thanks a lot for your reply.
This is probably what the person behing MB was trying to accomplish, although he left the module directory and therefore, my assumption, it's the one picked up at runtime.
Although, as you suggested, the AKU 3.3 version is there as well, in the Rom root.
Anyway, what I'll do is simply to remove the module directory corresponding to the DLL so that the one in the root is used.
Thanks a again,
Ka.
Hi guys,
I flashed my Wizard with the base OS ROM version 5.2.318 (build 15342.0.0.0, customization) published in this forum about a month or so...
After flashed, it just start the OS without running the Extended_ROM content, so I installed all cab files inside Extended_ROM folder by myself.
What I should modify in order this run automatically on next hard-reset?
You have a G4 Wizard looking at your signature, thus the files Autorun.exe and Config.txt (a list of all the cabs in the right format- these files can be found in the Faria Ext-rom tutorial package) need to be in the \Windows folder but they can still point to run Cabs from the Extended ROM. Check the registry before cooking to see it points to the autorun file then you're good to flash.
Thanks for the response... I did it and is working now!. Useful tip.
I share my base so that our Cook could have easier life (I hope).
This is not a ready-for-flashing product. You will still have to Cook and BuildOS. Don't download if you have no idea what to do with cooking.
This is Vanille ROM (SYS & OS) based on 2.20.707.1B WWE. Both files and Registry are trimmed.
I use this base to cook my own ROM and everything looks good. I am appreciated if you could trim down the size further.
What are removed (Removed items are included in zips attached):
------------------
SYS
-Windows Update
-Internet Sharing
-Transcriber
-Windows Live
OEM
-Comm Manager
-Audio Manager
-Home Plugin
-Phone Skin <== experimental
-Task Manager (X button)
-MMS
-TouchPad and Touch Keyboard
Enjoy!
Base-ROM (SYS & OEM)
http://www.fs2you.com/files/78a403eb-8c8d-11dc-922a-00142218fc6e/
Ripped SYS files
http://www.fs2you.com/files/a7c5aaa3-8c8d-11dc-b3b1-0014221f4662/
Ripped OEM files
http://www.fs2you.com/files/34c020ba-8c8e-11dc-96c1-0014221b798a/
Attached is the Network Wizard from ExtROM, removed operator's customization package.
PS: The two "CheckAutoRun" files are also removed. You may copy them back from your original ROM.
100+ view but no one loves it? omfg.
chill dude ... thanks for the uploads the the chefs will be happy with it
evermick said:
100+ view but no one loves it? omfg.
Click to expand...
Click to collapse
Don't worry bro, I'm downloading it now and I will do some cooking 2nite.
Cheersss
kick to first page.. I wonder if ppl know what to do with this
Bascially when you put back Comm Manager, Audio Manager, MMS, Phone skin and Task manager, pack it into .NBH and flash it, it is a Vanilla ROM already.
I seperate each part just for the sake of easier replacement of different modules.
I am trying to make a clean, trimmed down rom. I am sure I can learn something by reviewing your base here.
Thank you vm for sharing!
Hey guys... Exploring the keyboard oem package i've noticed that there are alot of language database files for other languages than the ones selectable in the rom.
Mayb we can edit the reg to make these languages also available?
I'm studying on it, but still no progress.
gr. bram
bram_smulders said:
Hey guys... Exploring the keyboard oem package i've noticed that there are alot of language database files for other languages than the ones selectable in the rom.
Mayb we can edit the reg to make these languages also available?
I'm studying on it, but still no progress.
gr. bram
Click to expand...
Click to collapse
Good finding, I did not notice it.
Thou, I noticed there are a lot of lang files when I remove the Touchpad.
Sounds like I can remove even more files for keyboard layout as I don't need them
Yes I Accept Bribes And Donations, Just So I Can Build Up A Small Buffer For A Broken Device So I Can Keep On Cooking, Ripping Apps, And keep Building full SD Card Coded Cabs and Keep The World Save From Bricks
XDA-Developers FireFox & IE Search Bar Plug In
Vanilla 2.2 Cooking Rom
Kitchen
My Full Signature With All Links To Important Stuff:
Touch/ELF
IPL: 1.17.0002
SPL: 1.11.000
RADIO: T-Mobile NL03.08.90
ROM: SPC WM6.09 (SP1) / TMNL2.26 Full / Stripped
Wizard/G4
IPL: ????
SPL: ????
RADIO: ????
ROM: ????
SDA/Typhoon
IPL: ????
SPL: ????
Versatel/24 Skin
Orange SPV100
DEAD
O2 XDA - Wallaby
Next Device - HTC Rapheal
Noonski said:
Sorry Mick, there's to much going on.
If this is from the 2.2 dopod rom my advice would be to leave HTChome exe's and Dll's in the Rom, as not everyone has this new updated Home Plugin yet.
Click to expand...
Click to collapse
This can be found again from my posted "OEM-ripped.zip"
Entertainment can be removed.
I think some of us have an option.xml file for this.
And Office.
I have them both at home.
Click to expand...
Click to collapse
These stuffs could be easier removed from the SYS. They are packed within seperate folders already. So no hard work is needed
Maybe I should seperate those stuffs in next version (if there is any) to make the ROM even easier for noobs.
Also it would be nice to integrate Rapi certificates.
Click to expand...
Click to collapse
Maybe I would just build a seperate package for this
evermick said:
This can be found again from my posted "OEM-ripped.zip"
These stuffs could be easier removed from the SYS. They are packed within seperate folders already. So no hard work is needed
Maybe I should seperate those stuffs in next version (if there is any) to make the ROM even easier for noobs.
Maybe I would just build a seperate package for this
Click to expand...
Click to collapse
Maybe i didn't use the right words.
What i wanted to say sort of is.
That you don't need to remove the actuall packages.
You split the whole rom up by adding option.xml files.
You set the needed folders to True and the unneeded folders to False.
Just check the option.xml i just attached for the entertainment folders.
Also are removed files from Oem folders brought into a new DSM file to prevent Missing files when extracting the rom.
And if WLM is removed do you add the removed Shortcuts to the WLM packages.
You know me i'm saying this to help, because if you want a good true vanilla it has to be perfect.
I've added some new packages to Elf Repository for use in kitchen.
HTCHome 2.1 plug in with Added Tab settings.
Updated Network Wizard SD and MM Package.
WWAN (if only for the option xml file, it's pretty useless to have anyway)
Multiple GlyphChace Settings Oem Packages.
All using Xtriny's new Build which does allow changing of Pagepool settings.
There's a memory fault in the pre 5.2.1933 version of 2.2 Rom.
At the moment i just started a new ROM and it's going to take weeks to finish it.
Luckely no ones waiting for a new ROM anymore because they are popping up left and right.
So i can take my time. I think it's time i take my responsibility and stop being a chef.
A lot is going wrong and i'm not talking about you.
Looks like we are making another "Pandora" style kitchen when we add option.xml to individual packages.
It is a good idea, but will consume lots of time. Let me see if I could do it
That's what i mean. But you don't need to do this alone.
I'm uploading every detail i can find.
So there's allready a lot of packages available.
After every change i make a selectable package.
And even when you re extract the rom you don't get missing files.
For instance when you remove files from OAMAPPS folder and rebuild the DSM contents. All the modules in folders won't be added and you still have missing files.
But if you then take the EXE's and DLL's out of the folder sand put them into OEMAPPS folder and then make Rebuild the DSM you won't have missing files.
Weird thing is that when you then extract that NBH file the OEMAPPS will then be extracted to SYS folder instead.
This shouldn't be a big problem as you have probaply seen in other kitchen's
Here's a Vanilla Based on 2.2 os 5.2.1933
You can extract the Rom and recook it.
4MB PP
It's 50.1 MB 62.63 Storage It's Nice and Neat.Everything not in it can be found in repository.
(The only thing i forgot is to remove the ZIP link)
Hay Noonski
The thing is i've been lookin for a clean rom with big storage and a lot of free ram with TochFlow and WITHOUT htc-home plugin for my Touch
How much Stoarge in the one u linked to? and free ram?
If some one have a good clean stable rom, would u plz pm or post me the link
Cobra2 said:
Hay Noonski
The thing is i've been lookin for a clean rom with big storage and a lot of free ram with TochFlow and WITHOUT htc-home plugin for my Touch
How much Stoarge in the one u linked to? and free ram?
If some one have a good clean stable rom, would u plz pm or post me the link
Click to expand...
Click to collapse
It's amazing.
It's almost 63 MB storage 59.39 free.
Memory free around 26.
no HTCHome wlm X button audio Manager and it's clean and recookable.
But i'm Pulling it so Xtriny can post it. It came from his base.
I just completely stripped it to 50.1 MB as close to the max as possible.
evermick said:
I share my base so that our Cook could have easier life (I hope).
This is not a ready-for-flashing product. You will still have to Cook and BuildOS. Don't download if you have no idea what to do with cooking.
This is Vanille ROM (SYS & OS) based on 2.20.707.1B WWE. Both files and Registry are trimmed.
I use this base to cook my own ROM and everything looks good. I am appreciated if you could trim down the size further.
What are removed (Removed items are included in zips attached):
------------------
SYS
-Windows Update
-Internet Sharing
-Transcriber
-Windows Live
OEM
-Comm Manager
-Audio Manager
-Home Plugin
-Phone Skin <== experimental
-Task Manager (X button)
-MMS
-TouchPad and Touch Keyboard
Enjoy!
Base-ROM (SYS & OEM)
http://www.fs2you.com/files/78a403eb-8c8d-11dc-922a-00142218fc6e/
Ripped SYS files
http://www.fs2you.com/files/a7c5aaa3-8c8d-11dc-b3b1-0014221f4662/
Ripped OEM files
http://www.fs2you.com/files/34c020ba-8c8e-11dc-96c1-0014221b798a/
Attached is the Network Wizard from ExtROM, removed operator's customization package.
PS: The two "CheckAutoRun" files are also removed. You may copy them back from your original ROM.
Click to expand...
Click to collapse
can this b used for cooking roms for elfin (128\256)? which kitchen do we use to cook this rom?
I'm not sure.
But it's an earlier Base then the vanilla version i posted up ahead.
But if you download the .nbh file and extract the os.nb then read the PP chaging tutorial in th cooking class kitchen you can check if it has the correct value.
If the value for pagepool is 20 it is for both elf and elfin.
hello guy´s
i am new here and i want to flash the vanilla2.20.707.1B on my elf
i´ve got ipl 3.10 and spl 3.07 on it . the problem is : every time i try to flash ( Executing HTC_Touch_WWE_ME_2.20.456.1B.exe ) it Goes through the bootloder to status bar , after holding on at 1 % the touch restarts to winmob.
Ahe Flash prog ( RUU ) is showing ERROR 260: Connection.
can someone plz help me i´ve searched all the fourums . after 4 -5 h of trying you are my last hope.
Greetz Foe
I´m not sure, but if your IPL / SPL is the patched version, it has overwrite protection, and the ROM you´re trying to flash is full, it contains all areas: IPL, SPL, ROM, Splash and Radio.
The way around is to extract the individual ROM components and rebuild the NBH file including only the ROM section, leaving IPL, SPL, Splash and Radio out. When you flash this one, IPL/SPL won´t be overwritten, so no error will pop.
Any kitchen around comes with all the tools you need for the procedure. If you don´t know how to do it, take a look at the forums, this subject is very well covered.
Hope this helps.
Eduardo