Quick GPS Help - Touch Pro, Fuze General

Hi,For some odd reason my quick GPS does not work anymore. My TomTom is non functional as well. I have checked my data connection and it is active. Can somebody help please.
Thanks in advance.

Can somebody please assist? I have checked my data connection and it is working. I have internet connection, for some strange reason Quick GPS and TOMTOM is not working. Is there a setting somewhere to activate this?
Thanks

Can somebody please assist, I really would appreciate a fix to this issue.
THANKS

I am having an issue with my GPS, except I got my unit 2 days ago, and can not get the GPS to work at all, with OEM rom or with any other custom rom. (it wont work with garmin xt, google maps, HTC GPS, or GPS tweak tools).
I hope I dont have a bad unit.

Strange thing, mine worked fine for about three weeks and all of a sudden it stopped working.

did either of you notice the unit getting *really* hot just before it went out? ...as in I-stuck-it-in-my-pocket-and-now-I-have-crotch-scars kind of hot?

zahbaker said:
Hi,For some odd reason my quick GPS does not work anymore. My TomTom is non functional as well. I have checked my data connection and it is active. Can somebody help please.
Thanks in advance.
Click to expand...
Click to collapse
When you say that quickGPS is not working, what do you mean? It doesn't display the page with the "Download" button? You press the "Download" button and it can't connect? It connects but never finishes downloading the data? What are the specific symptoms you're seeing?

I see the quick gps download button, when I click download, the message that I get is connection failed. My tomtom as well does not work anymore. I do have inetrnet connectivity, it's just the quick gps and tomtom that is not working. Please assist. Thanks

Patience
equinox2355 said:
I am having an issue with my GPS, except I got my unit 2 days ago, and can not get the GPS to work at all, with OEM rom or with any other custom rom. (it wont work with garmin xt, google maps, HTC GPS, or GPS tweak tools).
I hope I dont have a bad unit.
Click to expand...
Click to collapse
I've had my TP for 3 days now. As with the Kaiser and my hermes Holux bluetooth device it takes approx 5 - 10 mins to get the initial fix on satellites after that it appears to be working fine. Google maps, my old TTv6 all working fine. Takes about 30secs from startup to pickup Sats and shows about 5-7 sats everytime.
So just be patient with the initial startup. It should come.

zahbaker said:
I see the quick gps download button, when I click download, the message that I get is connection failed. My tomtom as well does not work anymore. I do have inetrnet connectivity, it's just the quick gps and tomtom that is not working. Please assist. Thanks
Click to expand...
Click to collapse
What are the values of the registry keys HKLM\Software\HTC\QuickGPS\SNTP\Server1, Server2, and Server3? (I have values like xtra1.gpsOneXTRA.net.) What happens if you type that address into Internet Explorer or Opera?

When I type the address in internet explorer I get to the RX Networks webpage.
My internet is working fine, it's the gps thats not working.
Thanks

zahbaker said:
When I type the address in internet explorer I get to the RX Networks webpage.
My internet is working fine, it's the gps thats not working.
Click to expand...
Click to collapse
Well, QuickGPS is an Internet app, not a GPS app. All it does is download a week's worth of satellite ephemeris data from one of those servers. When you reported "connection failed" as the problem you were seeing in QuickGPS, that seemed to indicate that you weren't able to connect to the server.
So if you can get to the server, as it appears, maybe the message is about connecting to the GPS unit (to transfer the ephemeris data? Not sure about the architecture of the GPS here). What values do you have in the "External GPS" pages on the System settings tab? Have you tried the GPSTest tool? Is it able to connect to your GPS unit after you put the appropriate values into its "GPS Settings" page?
If GPSTest isn't able to connect to the GPS unit, then I think you probably have a hardware fault and should exchange your phone for a new one.

Can Someone tell me what is the exact job of the Quick GPS which is in Programs ? for me was expired and i just update through gprs and then show me some valid days remaining.
is it help to connect to satellite faster or something else ? and what happen if i don't update it? thanks.

When using WiFi, QuickGPS seems not to work if it's the first program to use the connection. If you make an Internet connection with some other program first (e.g. PIE), QuickGPS will work over WiFi. At least that's my experience with the stock AT&T ROM.
This problem doesn't seem to occur with GPRS/3G/HSDPA connections, only with WiFi.

P525Lover said:
Can Someone tell me what is the exact job of the Quick GPS which is in Programs ? for me was expired and i just update through gprs and then show me some valid days remaining.
is it help to connect to satellite faster or something else ? and what happen if i don't update it? thanks.
Click to expand...
Click to collapse
Yes, QuickGPS reduces the wait for getting your position when you first start up a mapping program.
The way GPS works is that the GPS receiver uses the positions of the satellites and the distance to those satellites to calculate its own position on the Earth. That requires knowing very precisely where the satellites are at any given time. The satellite position information is called the ephemeris.
Each satellite, in addition to broadcasting time signals (which enable the GPS receiver to determine the distance to the satellite), transmits its own ephemeris. A GPS receiver starting up from scratch has to receive the ephemeris data from each satellite it will be using before it can figure out its own position.
QuickGPS eliminates the need to receive the ephemeris data from the satellites by sending a week's worth of ephemeris data over the Internet. The GPS receiver can use that immediately instead of getting it from each satellite in turn. That significantly reduces the TTFF (time to first fix), i.e., the initial wait before you can start using a GPS-based map program.
The "expiration date" is simply the last point in time that is covered by the ephemeris data sent by QuickGPS. After that point, you have to get more data, either from QuickGPS or from the satellites.

wmm said:
Yes, QuickGPS reduces the wait for getting your position when you first start up a mapping program.
The way GPS works is that the GPS receiver uses the positions of the satellites and the distance to those satellites to calculate its own position on the Earth. That requires knowing very precisely where the satellites are at any given time. The satellite position information is called the ephemeris.
Each satellite, in addition to broadcasting time signals (which enable the GPS receiver to determine the distance to the satellite), transmits its own ephemeris. A GPS receiver starting up from scratch has to receive the ephemeris data from each satellite it will be using before it can figure out its own position.
QuickGPS eliminates the need to receive the ephemeris data from the satellites by sending a week's worth of ephemeris data over the Internet. The GPS receiver can use that immediately instead of getting it from each satellite in turn. That significantly reduces the TTFF (time to first fix), i.e., the initial wait before you can start using a GPS-based map program.
The "expiration date" is simply the last point in time that is covered by the ephemeris data sent by QuickGPS. After that point, you have to get more data, either from QuickGPS or from the satellites.
Click to expand...
Click to collapse
wow, interesting, lots of new and useful information for me that i didn't know that before. thanks man.

Not seeing any 10 minute delay like you saw. Are you updating current sat location data with QuickGPS? I notived using GPStest and MS Pocket Streets that Sat connections go up and completely down all the time. Nice thing is, GoogleMaps ignores the quick downs so it LOOKS like a good connection that never disapears. don't know if this is intentional on Google's part, but it works, even standing still/walking (once connection is made). Lovin the Sat view whilst I use GPS for directions.

Same here: Quick GPS cannot connect... What is this? Maybe a server fault, or do I need to Hard Reset?
LE: Fixed it: I just run Connection Setup again, then it suddenly worked.

i just did a hard reset and quickgps will connect only after i open up a browser and googlemaps sits at seeking gps sats. i had it working 2 days ago and then my battery died and it hasnt worked since. i did notice that the phone was really warm though.

quickqps hasnt worked for me for a couple of weeks now...and i still havent fod anything to fix it

Related

GPS Issues?

Having fixed my SMS problem, I now have another question.
Should the GPS work out of the box? I have added the googlemaps app but can't seem to pull up my location.
Should I try hard reboot? Any suggestions on how to get this working?
No, don't try a hard reset. First download the satellite updates from Quick GPS and then your device should pick up a GPS signal.
I had to set mine to com port 4 before it worked. Any slow baud rate seems to work.
My first fix took me over 20 minutes, now it's faster, but nothing compared with my HTC 3300.
Yer the GPS takes the longest to get the first fix...same with most devices....if its been offline for a while again it takes a little longer.
For example my holux bt321 says it will get a fix in 6 seconds....but the first fix was around 4 minutes.
On the Touch Pro I also had the same problem, I switched to the GPD1 port (???) and then I got a fix in Google Maps. The location indicated was a good 100 - 200 meters away from where I was though, so could the GPS be wrong? I had already downloaded the QuickGPS data before leaving the house 15 minutes earlier, so that should not be the issue.
What are the GPD ports anyways? On which port does/should the internal GPS communicate with WM6.1 / GoogleMaps?
Also, is there somewhere to enable or disable the GPS in the first place (not in the navigation software that is?)

How to test the gps?

What is a good program that works with the TP so that I can test to see if my built in gps is working correctly?
I have TOMTOM7 installed and the application works but I can never see any satellites.
I tried mapopolis but i can't seem to establish a connection to the gps.
I updated the gps info using quick gps.
What com port and baud rate does the unit use?
What settings should I have in the "external gps" settings?
Thanks for your help!
Use the attached program to test the GPS.
It will search COM ports automatically
But I guess you can know the port from the settings tabs "External GPS" icon if it's like Kaiser
Anyway, I will be of further use in like 4 days
pjmiebach said:
What is a good program that works with the TP so that I can test to see if my built in gps is working correctly?
I have TOMTOM7 installed and the application works but I can never see any satellites.
I tried mapopolis but i can't seem to establish a connection to the gps.
I updated the gps info using quick gps.
What com port and baud rate does the unit use?
What settings should I have in the "external gps" settings?
Thanks for your help!
Click to expand...
Click to collapse
ok it seems its on com 4 with baud rate of 9600.
ill put it by the window and see if any satellites come up.
The screen just right now says: GPS starting up
Edit: ok great I just got 3 satellites. I guess it works!
Great that it works
You need at least 4 though to get a fix
Kindly, post your radio info and your location and let me know how many satellites did you view (press up on dpad as the 1st screen shows only upto 8 and it can see more, hopefully)
pjmiebach said:
ok it seems its on com 4 with baud rate of 9600.
ill put it by the window and see if any satellites come up.
The screen just right now says: GPS starting up
Edit: ok great I just got 3 satellites. I guess it works!
Click to expand...
Click to collapse
posting the number of satelites you receive is a bit pointless.
This will depend on many factors such as
1) The number of sats viewable at any given time in your area (the sats are not geostationary and therefore move around)
2) The location of the sats during the test - some could be close to the horizon and therefore have a week signal
3) Weather conditions, cloud rain etc,
4) Terrain
etc
etc
Basically, you are right.
But if you are fast enough, you can test several radios in the same 10 mins.
And you can judge by testing in the same place which radio is better for GPS (Fix & View).
A mention of your location will be a referrence for others.
There's a thread with more radio fuss to hold such info to be useful in the future.
Hi pjmiebach - thanks for the hint and the software - I get 4 satellits (yellow beamer) but when I tryit again with Google Maps it finds no Satellite ???
Any explanation from yur side ?
as a matter of fact, on-board GPS works with just about any baud rate you select - so choose the fastest
peter7 said:
Hi pjmiebach - thanks for the hint and the software - I get 4 satellits (yellow beamer) but when I tryit again with Google Maps it finds no Satellite ???
Any explanation from yur side ?
Click to expand...
Click to collapse
errr It worked find with TOMTOM7 after taking like 15 min to find it's first fix. Never tried Google maps yet cause my data plan doesn't start until the 8th of Sept.
you can start google maps and check in the right menu for gps and tap that one so it uses the internal gps instead of internetconnection.
it is also a good idea to goto connectionsettings and wipe all existing connections as activesync wont require these and you can download them later from the provider website or by running the carriersetup
ok. ive broken something on my raph. gps was working fine when i flew up to sydneyim guessing ive fiddled with something (external gps setings) and now no worky. tom tom7 is set to internal. if i disable external gps gpstest pauses on com 3 but nothing. if i turn windows on. it stops on com 4 shows some progress bars but they are all at 0 ive soft reset. taken the battery out canter figure out whatsoever wrong. any ideas would be awesome
TT7 and google maps
My tt7 takes 2 - 3 minutes to get a fix.
Google maps takes about 10 secs.
If i start tt7 right after i used gm it takes about 20 secs to get a fix.
I'm gonna try gpsgate and changing the baudrate a bit, see if it helps.
I'll let you know.
** Edit **
GPSGate does the trick for me.
Buy it at your fav appstore and create a new virtual com port for all NMEA progs, go to tt7 gps settings select other nmea device, select the com you just created, at max speed.
com port problem
atreidae said:
ok. ive broken something on my raph. gps was working fine when i flew up to sydneyim guessing ive fiddled with something (external gps setings) and now no worky. tom tom7 is set to internal. if i disable external gps gpstest pauses on com 3 but nothing. if i turn windows on. it stops on com 4 shows some progress bars but they are all at 0 ive soft reset. taken the battery out canter figure out whatsoever wrong. any ideas would be awesome
Click to expand...
Click to collapse
My Raphael do the same but after hard reset will be work again.
mzperxfl said:
My Raphael do the same but after hard reset will be work again.
Click to expand...
Click to collapse
Me too! :-( No, I really do not enjoy hard resets...
Another nice GPS testing software is VisualGPSce. Be sure to get that.
I wonder if the problem was with QuickGPS. VisualGPSce was telling me that it "saw" 11 satellites, but wasn't able to lock onto any of them. I know that it had worked previously, but then I had a couple of days break and QuickGPS had updated it's data during that time. After the Hard Reset, I haven't used QuickGPS.
About the performance... seems to get fix quite fast, but looses them very easily too. I tracked today a half hour buss ride and I frequently lost the connection. (Sure it was not the most optimal situation...). Also the accuracy wasn't that good - well, either the GPS or Google Maps. actually VisualGPS showed that the GPS wasn't very accurate in following what was happening. The velocity would go to 0 only about 10 seconds after the buss had stopped at trafic lights or buss stop. Actually the buss frequently took of before the GPS showed us stopped. And then it was extremely slow on catching up. On Google Maps you could see the dot still advancing when the buss had stopped for that 10 seconds. Completely off the road - but that might as well be Googles error.
I do not have TomTom on this, but certainly the speed accuracy from VisualGPSce is not nearly as accurate as my TomTom 720.
Check also that the assisted GPS is not active.
If this option is actived, you lose the signal each x seconds.
To check this option I use Advanced config.
Note : I've a Diamond and one Raphael, same configuration, the Diamond find a fix into 40sec and the Raphael takes sometimes 5min!!!.
NLS said:
as a matter of fact, on-board GPS works with just about any baud rate you select - so choose the fastest
Click to expand...
Click to collapse
i find this to be true as well but the kaiser gps radio worked far better than this touch pro in every app I tried. I can put the TP in my car window and get a signal with random disconnects but if i put it in my lap i cant get anything. I could put the kaiser in my trun and be fine lol. Hopefully some upgrades to the radio software will be coming soon. Same result with me with .19 and .31
Hello,
I tested GPSTuner 5.4, VisualGPS, GoogleMaps and TomTom 7 and I have a strange problem... I installed thos programs after hard reset to be sure...
In the GPS information window the GPS position changes but the speed is always 0km/h and in TomTom or GoogleMaps my position on the map don't move...
Have you seens this problem ?
Any kind of solution ?
PLZ....
PS :
Where can I find rom &Radio version ?
What is your TomTom 7 version ?
Hello All..
this is my first post. I just received my TP today via Vodafone. I havwe sucessfully loaded on TomTom 6 and I have it working with the TT external GPS receiver.
can someone advise me whether the Touch Pro's internal GPS will work and if so, how do I go about setting it up.
PS, I only see 4 options in TT6, and none say internal.
Thanks in advance for any assistance

[Q][SOLVED!!!] Fuze GPS Issues?

Hey all, I picked up my Fuze yesterday at a local AT&T store, and I'm really happy with it with the exception of one thing: I can't get the GPS to work. I've downloaded Google Maps Mobile, installed it. I ran QuickGPS to download the latest satellite data, and Google Maps still just sits there and says "Seeking GPS Satellites (0)..."
Any ideas or any settings I need before this works?
SOLUTION:
If you've installed AT&T Navigator, uninstall it. Be sure to call 611 and make sure that you were not charged the GPS service charge on this month's cycle.
Either the HTC guy didn't know his stuff, or this just happens to work around the "Telenav-Only" Block.
I've successfully gotten repeated locks on Google Maps without the use of Telenav. It's not even installed. Here's the procedure to get a (relatively) fast GPS lock:
If you don't already have it, download Advanced Configuration Tool v3.3 (or newer) (see here: http://touchxperience.com/en/advanced-configuration-tool.html) (needs .Net Compact Framework 3.5. see here: http://www.modaco.com/content/windo...act-framework-3-5-without-upgrading-your-rom/).
In the Advanced Configuration Tool go to GPS. Make sure the subsettings are as follows: (the last one is 32KB if you were wondering)
Assisted GPS: Enabled
Log file: \windows\GPSLogFile.txt
Old log file: \windows\GPSLogFileBack.txt
Max. log file size: 32768
Next, download and install GPS Test 1.04 (http://forum.xda-developers.com/attachment.php?attachmentid=129672&d=1226619670)
Now, every time after a soft-reset (or each day) you want to use the GPS, perform the following actions:
Run QuickGPS and download new satellite info.
Run GPS Test (ensure that GPS settings are on COM4 and a baud rate of 38400).
GPS Test will give you a bar and a signal strength indicator for each satellite. The fix process can take a couple minutes, but just give it some time. Upon getting a 3D lock, it will display "GPS Running".
At this point, you can exit GPS Test and open up Google Maps, TomTom, Garmin, iGo, whatever map tool you use. The navigation app should get a quick (< 30 seconds) fix with anywhere from 7-10 satellites depending on location. It will continue to do this until a long duration of time has passed (I'm talking 5-10 hrs (haven't tested)) or until a Soft-Reset.
This procedure worked for me. I don't know if it'll work for everybody, but I think it's pretty reasonable, the wait time isn't too long for a GPS fix. Good luck and god speed, gentlemen. Let me know if this works for y'all or not.
m.carroll said:
Hey all, I picked up my Fuze yesterday at a local AT&T store, and I'm really happy with it with the exception of one thing: I can't get the GPS to work. I've downloaded Google Maps Mobile, installed it. I ran QuickGPS to download the latest sattelite data, and Google Maps still just sits there and says "Seeking GPS Satellites (0)..."
Any ideas or any settings I need before this works?
Click to expand...
Click to collapse
Mine does too - I think you may want to check out the numerous GPS threads on here on how people corrected theirs. I have been busy doing other stuff to worry about the GPS, so I haven't tried any of their advice, but there are Tons of threads on the GPS issue.
i'll look into it, although i didnt think it was the same issue...
m.carroll said:
Hey all, I picked up my Fuze yesterday at a local AT&T store, and I'm really happy with it with the exception of one thing: I can't get the GPS to work. I've downloaded Google Maps Mobile, installed it. I ran QuickGPS to download the latest sattelite data, and Google Maps still just sits there and says "Seeking GPS Satellites (0)..."
Any ideas or any settings I need before this works?
Click to expand...
Click to collapse
Mine works, but so far only at home sitting in an east-facing window. Have you tried calling HTC Support? I called about another matter and got an answer right away. The US number is: 866-449-8358.
Let us know how you make out if you call!
m.carroll said:
i'll look into it, although i didnt think it was the same issue...
Click to expand...
Click to collapse
Most people are just complaining about lag, but there are a few posts about people having trouble getting a fix. It looks like tomtom and the gps tool are trying, but they just won't get a fix. I even stood outside in the cold for 30 minutes, and it never would work. I made all the changes with advanced config and also the manual registry changes... pretty much every suggestion I've found in all the other threads, but nothing works. If I happen to come across a solution, I'll definitely pass it on... but I'm less than optimistic at this point.
I had the same issue - I grabbed the Diamond TomTom cab (from diamond forum - no maps needed) and was able to see the progress of locking in the satelites.. It took about 10 minutes of the phone sitting outside to get a lock for GPS. Now that it has locked once (I have rebooted several times btw) it seems to pick up the lock a lot faster.
And.. I have not tweaked my GPS settings and a-gps is still enabled.
The GPS is a little shotty if you ask me.. I'm sure something will be changed in software down the road to speed up getting a lock.
I have the same issue
Google maps just keeps timing out
google maps wont work for me
Not sure if this will help or not, but I had mucked with my GPS com port settings (under Settings, GPS Settings).
For Programs: Com4
For Hardware: (None)
Baud Rate 4800
For Access: Manage GPS automatically (recommended) --- Is checked.
In Google Maps, I have the "Managed by Windows" radio button selected.
Doing that allowed me to pull up the satellites in about 10 mins the first time, then a lot more quickly after that.
I have no idea what that actually did, but it made GPS work in google maps for me.
I think it would be a good idea to get a program that shows you GPS lock status, so you can see which satellites are detected and their signal strength. Other than that, just leave the phone outside with a clear view of the sky for a little while and see what happens.
m.carroll said:
Hey all, I picked up my Fuze yesterday at a local AT&T store, and I'm really happy with it with the exception of one thing: I can't get the GPS to work. I've downloaded Google Maps Mobile, installed it. I ran QuickGPS to download the latest sattelite data, and Google Maps still just sits there and says "Seeking GPS Satellites (0)..."
Any ideas or any settings I need before this works?
Click to expand...
Click to collapse
I had the same problem at work. I think GPS will work outside. Mine started working with Google Map and Live Search when I was driving.
If that still doesn't work, try install at&t navigator. Maybe it will unlock the GPS.
GPS solution
Hi all I spoke with HTC and you need to download and enable Telenav to activate the GPS. It did not ask me to sign up there is basic turn by turn once it is downloaded and gives you the option to upgrade. Once telenav was installed google maps found satelites within 30 seconds. hope this helps
Ah, that explains why it worked for me -- when I bought my Fuze, I let the salesman sign me up for the 30-day free trial of Telenav. I expect to cancel it, but I was curious to see what it was like.
Same worked for me. I tried the 30 day free trial and now the GPS works. TeleNav doesn't even seem that bad since it checks traffic for you...
No GPS lagging behind reporting your position like the TP?
I have not seen any lag. it is very quick
so basically telenav unlocks the gps and then after one use, it unlocks the gps for use with tomtom or garmin?
posershadow said:
so basically telenav unlocks the gps and then after one use, it unlocks the gps for use with tomtom or garmin?
Click to expand...
Click to collapse
Man this seems kind of shady on At&ts part...
hondaguyjoe said:
Man this seems kind of shady on At&ts part...
Click to expand...
Click to collapse
Seriously. Didn't you ask why?. Or question this since its an apparant marketing ploy. I heard the same for tomtom. It took my gps a while to to get the first time but after then it locked significantly faster.
i agree, it is shady, but in the end, it works. i got a perfect signal (locked into 6 satellites) with google maps, almost instantly (after connecting once with telenav).
its smart on at&t's part, but now i'm going to look at the cab and see if i can find what makes it work!
can anyone upload the telenav app so i can unlock my gps. i dont have the stock rom anymore(changed to natf rom) and telenav isnt on there.

Fuze GPS Data Stream Freezing: Possible Solution

Hi guys,
I thought I would share what I discovered today. If this solution has been found, I apologize. Most users have been trying to get their Fuze GPS to lock on to satellites. Having used several GPS phones and many Bluetooth GPS pucks, I would say I'm somewhat experienced with using GPS on the PPC platform.
I have no issues with getting a lock on my Fuze. My issue is with Fuze's GPS chip randomly stop streaming data to my GPS applications. This usually happens after the initial lock. So for example:
a) Get a lock using any GPS application (GPS Test for example)
b) Exit GPS application
c) Launch GPS application again. Fuze will take several seconds to regain lock.
d) Fuze will take several seconds again to lock in, THEN it just stop streaming data to the GPS application!
I was able to reproduce this consistently. If you're using Garmin or TomTom, they will indicate that GPS lock is lost or something to that effect.
THE SOLUTION: Turn OFF aGPS!
a) Start->Setting->System->AGPS Settings
b) Uncheck BOTH "Enable AGPS" and "Enable AGPS location information..." (under the Privacy tab)
I was able to show that this consistently resolved my GPS data stream stopping problem. I'm using the .28 radio, but try it on the stock radio to see if that works and let the community know. What about QuickGPS? AFAIK, it's not causing any problem at all.
I hope this is helpful.
After standing on my deck for 20mins last Friday waiting on locks, I follow above and get a lock in 10secs(in my living room).
Turned off AGPS was the only change
It looks like without AGPS, the GPS would just stream whatever info it had cached even if it lost signal.
AGPS would clear last state instead and so become highly sensitive to signal-loss on the next poll. It doesn't help that this device is weaker in picking up GPS signals.
Yes, turn off AGPS.
NuShrike said:
It looks like without AGPS, the GPS would just stream whatever info it had cached even if it lost signal.
AGPS would clear last state instead and so become highly sensitive to signal-loss on the next poll. It doesn't help that this device is weaker in picking up GPS signals.
Yes, turn off AGPS.
Click to expand...
Click to collapse
Indeed, that would be exactly how I like my GPS to behave (use the cached ephemeris data). In fact, that was how all Bluetooth GPS puck works before the advent of AGPS. I guess AGPS is a good concept, but its implementation needs to be further tweaked.
If you have not used your GPS in a week or so, then AGPS is an advantage. Daily use, perhaps not so much.

GPS on AT&T Fuze with ROGERS?

Hey ive unlocked and flashed to a sweet NRG rom and love it. I just want to use google Maps (or something similar) to find my position on a map (turn by turn maybe?). I remember with my iPhone when I first had it the GPS worked great then one day I was never able to get my actual position (just within a certain amount of meters).
Did rogers shut down GPS?
Now on my new phone when I goto "GPS location" in google maps it searches for a satellite but doesnt seem to get my position (0)... Is there a setting I can turn on to allow GPS or do I need to cal rogers and rip on someone? LOL
keep up the great work guys!!!
- Eddy
I just turned 3g on and did the HTC GPS tool. I opened the port and started the test and then menu-Information and I dont seem to have a position.
any ideas guys? seems like rogers problem.
eddyg519 said:
I just turned 3g on and did the HTC GPS tool. I opened the port and started the test and then menu-Information and I dont seem to have a position.
any ideas guys? seems like rogers problem.
Click to expand...
Click to collapse
GPS on the HTC is using the basic GPS Signal coming from satellites. Are u outside or near a window to a fix ?
Look http://en.wikipedia.org/wiki/Global_Positioning_System
What u used was A-GPS what is assisted GPS with help from Cell Phone provider. It gives faster fix and a pseude gps in buildings.
Go outside with ur cellphone with clear sky view, start the htc gps tool and u should get position fix within some minutes or even seconds. There is no need for 3g because the gps itself does not need any cellphone connection. It takes satellite signals to calculate the position.
When u update quick gps it is faster in the position fix because it already knows some basic sat data. But still no phone connection necessary for using GPS.
The google map u then only see with data (3g or wlan) not because of the GPS but because of the drawed map graphics wich have to be loaded.
ok i will try the outside thing although I have the phone pointed to the window pretty much. Checking rogers website both phones only have a-GPS but I still cant get an actual location on either. Only about a 4 block square or circle.
EDIT: ok i enabled A-GPS on the touch pro and still no luck with google maps. It still seems to be looking for actual GPS
OK im managed to get it working. I changed the port to com5 and scanned found some sat's I had to change the bit thing to 56700 on com5 within google maps. Seems to be working like a charm!

Categories

Resources