Hi i'm a newbie this is my first post I have a SPV M700 that has been unlocked, since the unlock i cannot use my tomtom6 as i cannot get a gps signal, i understand that i need to download and install a radio rom with gps but i am unsure of the procedure and where to download despite some searching. i understand that this is a common question and has probably been answered many times over but like i said i'm new to this game and i'm not very knowledgeable about radio roms and flashing, any help would be greatly appreciated
Hodgy
Related
Hi Guys
Its my first post on these forums and they look fab..really lucky to have found these forums.
I have recently purchased a qtek 1020 from ebay..unfortunately it didnt come with a Manual...and hence been struggling a bit.
Actually its also locked, and I wanted to unlock it, the only suitable solution I can find it this
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby/SER/backup
My phone details are as follows:
qtek 1020
Rom 4.02.04 ENG
Radio version a.33.02
protocol version 1.3.3
Model PW10b1
If I use the above method would I be degrading my ROM?
Any help would be most appreciated
Thanks
Anyone?
Hi,
I am expecting my German XDA in the mail in the next few days.
I have been reading this forum for the past 2 weeks, and have tried to wade through all the great advice to educate myself on ROM upgrading issues. I would like to clarify that I understand this properly.
As I understand, in order to render my new XDA "O2-free" and customizable, not to mention english, I need to install a new ROM - probably the latest Imate ROM or maybe the PDAMobiz ROM.
Before I do this, should I Unlock the CID? From my reding, this will allow me to the install any ROM.
Is this an accurate understanding of everything involved?
Are there other better options to achieve my goal of a non-branded non-operator specific Jamin/Neo?
Is there a way to save my original German O2 ROM if it became necessary to return the unit for service?
I hope people do not object to thsi post. I know that it can be irritating when newbies post on topics which have already been discussed thoroughly. I have spent at least 2 weeks trying to educate myself on the procedures, and really would just like if some knowledgeable contributor could reassure me that I have not missed something obviuos.
Thanks,
Ronan
Check here
http://wiki.xda-developers.com/index.php?pagename=Prophet_Upgrades
I'm still updating the page, but its working fine for my dutch s200 (now english dopod rom)
Hi,
I tried to follow the steps as outlined, but when I get to teh first soft reset, the device locks, and I can do nothing with it!
Please tell me how to fix it. Can I use bootloader?
How?
Thanks,
Ronan
Crisis averted!
Got into bootloader and installed the dopod rom.
Ro
Dear Ro,
have you upgrated your PDA?
Can you write your procedure?
Best regards
Daniele
please, read this topic and tell me what you think about it...
http://forum.xda-developers.com/viewtopic.php?t=54878
I entered bootloader then used the Dopod ROM with the modified romupdateutility.
I have not tried anything else.
Does anyone know of a solution for us SPL 2.15.0001 users? We seem to be very restricted in options.
Ro
Please, can you write the links where it is possible to download this rom and all the necessary files?
Is there a way to save my original German O2 ROM if it became necessary to return the unit for service?
Click to expand...
Click to collapse
Here u get the official one from O2: http://www.o2online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/index.html?nidx=1
I just upgradet to the new dopod wwe one. No probs at all with my XDA Neo. Its just 5 days old, so no CDI-unlockin needed Then I also took the O2 bootscreen again, and it works...still :wink:
Is there a way to save my original German O2 ROM if it became necessary to return the unit for service?
Click to expand...
Click to collapse
Here u get the official one from O2: http://www.o2online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/index.html?nidx=1
I just upgradet to the new dopod wwe one. No probs at all with my XDA Neo. Its just 5 days old, so no CDI-unlockin needed Then I also took the O2 bootscreen again, and it works...still :wink:
Thanks dears,
I have updated it with Dopod rom......but now....how can I update to I-mate JAMin (italian) rom?
Does someone have an Idea to how do it?
Thanks, thanks, thanks
Daniele
Yes, you have to go to ftp.clubimate.com there you can find the JAMin ROM's and also you can choose the language you want.
As you know, first, you must CID unlock, then you can download your favorite ROM. Tell us your opinon after install it.
Hi everybody!!
glad to be there...I bought a P4550 today (i'm happy happy happy), and want to change rom
My phone is originally sim-unlock (original HTC?) but I don't know if it's SPL-unlock...
I've tried the HardSPLv1 but stay stuck on a grey activesync icon after unplug-plug operation...not so cool...read somewhere from a guy that you can continue the processus. Right?
Some informations:
Bootloader:
KAIS130
SPL-1.56.0000
CPLD-8
Elements:
ROM version : 1.56.406.5
Date ROM : 08/30/07
Radio version : 1.27.12.17
Protocol version : 22.45.88.07W
WinXP with ActiveSync 4.5
So, do I need to HardSPL it?? or can I directly flash the Rom???
Thanks in advance for any information!!!!
again, I'm happy
arno
HardSPL
You most certainly want to HardSPL your device. It's the best invention since sliced bread.
I suggest running HardSPL and then finding a ROM here you'd like and go to town that way. You can seriously spend weeks reading all the posts to find relevant information--use google to search these forums, it yields far better results than the built in one.
FYI on google if you sarch for "Kaiser HardSPL" you'll get results for all kinds of websites...including those that archive old postings here. A quick fix for searches if you're like me and have a Google Search bar in Firefox is to add "site:xda-developers.com" to your search (e.g. "Kaiser HardSPL site:xda-developers.com").
Check this link for more detailed searches using Google: http://forum.xda-developers.com/showthread.php?t=314616
I can almost guarantee that any question you can come up with in the first few weeks of owning/beginning to flash your device that there's no question you can ask that has not already been asked/answered (including this one I'm responding to).
Cheers,
-Q
hi everybody, i have a problem with my kaiser 8925 that after i used for 2 days ,everything was working good ,but a notice that my external memory got stoke and when i pullet out my phone not recognize any storage memory please help me and let me know what i have to do.
Thanks Quentin- for your fast reply!!
Before I posted this thread, I've readen a lot of infos and I can't find an appropriate answer.
Almost all persons who use the HardSPL have an ATT phone, or other, and have sim-lock. That's not my case.
And can't find the direction when you're stuck on a grey icon after unplug/plug. This problem happens on Vista...But I'm on WinXP...I'm confused...
Hope there's someone here who had same problem...
Thanks again for all this beautifull work on xda-dev
arno
For Kanky1
Please, start a new thread...we don't have same troubles...
EDIT...
Welcome OliPof...
I think I was little anxious for no reason...HardSPL ran like a charm...
Sorry for this useless thread...
Hi all, first post. Apologies if I've missed something obvious, but I've searched these forums (fora?) thoroughly and can't find it.
I have an Orange-branded UK Tytn II running WM6. It also has Radio vn 1.27.14.32 and ROM version 1.81.00.00 (G 22.45.88.07h if that counts for anything).
I've installed HardSPL on it without any problems and am now looking to unlock it using JockyW's hack; unfortunately I can't find radio 1.27.14.32 anywhere in order to reload that after the hack.
Can anyone help further?
Thanks
nickd79 said:
Hi all, first post. Apologies if I've missed something obvious, but I've searched these forums (fora?) thoroughly and can't find it.
I have an Orange-branded UK Tytn II running WM6. It also has Radio vn 1.27.14.32 and ROM version 1.81.00.00 (G 22.45.88.07h if that counts for anything).
I've installed HardSPL on it without any problems and am now looking to unlock it using JockyW's hack; unfortunately I can't find radio 1.27.14.32 anywhere in order to reload that after the hack.
Can anyone help further?
Thanks
Click to expand...
Click to collapse
Have you checked the FAQ, Wiki, 4th sticky down? It has a link to the ultimate radio thread that has a ton of radios in it. Try there. Remember always check the sticky first, especially before starting a new thread. Almost, if not all, of your answers are there.
Yep, checked the wiki and the ultimate radio thread, couldn't find it; searched the forum and couldn't find it either, hence the post.
nickd79 said:
Yep, checked the wiki and the ultimate radio thread, couldn't find it; searched the forum and couldn't find it either, hence the post.
Click to expand...
Click to collapse
I can't find that radio either, but there are others that you can use and might get better reception, unless your heart is stuck on that particular radio. Sorry if I wasn't much help, but it happens.
How to dump HTC Kaiser ROM -> How to Reconstruct a Dumped ROM
futbolkeeper said:
I can't find that radio either, but there are others that you can use and might get better reception, unless your heart is stuck on that particular radio. Sorry if I wasn't much help, but it happens.
Click to expand...
Click to collapse
Yeah, no worries. Was just wondering if anyone had been able to get other radios to work with that ROM, but will just have to give them a shot, I guess.
In fact, any other UK Orange Tytn II users and which ROMs/ radios are you using?
Dear Community,
i´m a new user and an informatican but i´m a newbie in flashing smartphones. So i can´t understand the following Problem:
I have a HTC Kaiser 130 from German Provider T-Mobile. Because this wonderful WM 6.0 is so extrem slowly i decided to flash my ROM to new WM6.5. I went to this forum because here you have the best xda-developers ;-) so now to my problem: After flashing (and i was doing it by the newbie flash tutorial!) in each WM6.5 ROM version i found here for Kaiser, i have NO Sound on my device. And when i try to make a call the connection will be established but the speaker and the mic doesn´t work. so what have i done wrong? can anybody help me? i really really don´t want to use the original ROM :-( i´m a power user and i will throw it out of the window when i have to work with 6.0 T-Mobile Brand anymore :-D
so many thanks!
I guess you forgot to flash your radio rom.
Try 1.70.19.09 so it will work.
hmm... sometimes i ask my self: HAVE I EVER BEEN TO SCHOOL? Or why CANT i read sometimes^^
i think exactly that is the problem
thank you very much
i try and hope
Never give up
Your answer is found very easily in the noob guides to flash the step is included and covered a million times in ROM threads.
Please search before posting a new thread and also post in correct sub forum.
Thankyou.
Thread closed.