I would like to utilize a different windows overlay than touch flo3d. I would also like to get it off my phone.
Is there a way to hard reset and not have the touch flo 3d set itself up?
Start > Settings > Today > Items. Uncheck TouchFlo 3D and tap ok
Thank you for the reply on how to disable touch flo touchflo3d from being active on my device. (I used a bit extra language there to help search engine results in the future.)
Let me refine my initial question. Is there a way to remove touch flo 3d or disable it from installing to the device when hard resetting?
Aloha
Maybe I could ask this, is touchflo the software also operating the camera and other hardware?
I could also ask this, is there a plain rom with no touchflo that would still work with all the hardware on a raphael/fuze?
Mahalo
using hard reset
the first time i turn on fuze its installing the software, but then i soft reset it. Now, i have no touchflo 3d. maybe you can hard reset, then soft reset when it trying to install additional program.
Related
Hey guys
New to TouchFlo - got it installed yesterday.
Having an issue though.
When I open it, by clicking the taskbar button, or in Start, it opens up.
When i want to go back to Today screen, I swipe up on it to toss it away, or even if i hold the right taskbar button to close it, it goes away.
If i try to access it again, nothing happens. screen stays on Today, but is not functional unless i press the END key, as if an invisible FLO is over the screen
Whats up here?
here is what i flashed yesterday
T-Mobile 2.26 ROM : MDA_software_update_226102_22610105_022511.exe
T-Mobile-UK_2.19.11_Radinly
NBD.v7.9
running old AT&T blue network on 8125
installed apps:
A_C Slide2Unlock
Xplore Keyboard
Today Agenda
Pocket Alarm
Nyx Password
Device Lock
Contact Manager
MhoairSofa Calendar+ Today Plugin
BatteryStatus (using this to overclock to 260mhz.)
PocketSoft ToggleBT
I had the iphone phonepad and stuff installed, but i couldnt figure out how to switch back to the Today screen without clicking SETTINGS, and still having iphone running. it was slow and laggy. any way around this?
thanks
I had same issue, only solution for me, was to stop using TouchFlo
Touchflo will only pull itself up the first time period...
Afterwards when you push the button to access it, it will appear nothing will happen... however if you swipe your finger as if you were turning the cube, it will infact go to the next page..... try it out
that is stupid!
any hopes of a fix?
The various versions of touchflo on wizard require you to press a button before getting touch to work. Depending on the ROM, this could be button 4 or left softkey.
HTC Tocuh has a video of Touch phone on their website. I see that even here, a button is pressed every time the touch features are accessed. This may be a feature of touch itself, rather than a bug in the way touchflo works on wizard.
kernelguy
danrw84 said:
that is stupid!
any hopes of a fix?
Click to expand...
Click to collapse
you can buy a touch.
man, think...
the touchFLO is hack for work on wizard....so is very hard to have this work perfect.
if you realy need the cube working 100% buy a touch
I have a Touch Cruise and got used to the Cube and the finger motions that pre-TF3D device uses. I see in the Advanced Configuration Tool that the Cube can be enabled but when I've done so there's no change -- still have the TF3D screen and it doesn't recognize the upward flinger flick to activate the Cube -- turned off TF3D but it still doesn't recognize the Cube. Can anyone tell me if this is even possible? Is it possible to turnoff TF3D and turn on the prior TouchFlo Cube?
Thanks!
Even if you enable it with any tweak program, cube will never pop as it is not there in the ROM.
For you to have your cube and remove TFLO3D, here's what you should do:
1) Start>Settings>Today>Items "Tab"
Remove the Tick beside TouchFlo
2) Search for a cube CAB file and install it to device memory
I think you still should enable the cube with the tweaker you use
Remember to restart before testing
Any luck with this?
Any reccomended cube?
I know this may sound stupid... But I just received the HTC touch fuze from at&t and it doesn't seem to have that special interface which it should have. It's just a simple list like the windows mobile interface. I tried changing the themes and whatnot but i'm going no where. I think I'm missing the touchflo 3d? Is there a way i can reinstall it?
try flashing a ROM or hard reset? or taking it back to the store?
hellonaty said:
I know this may sound stupid... But I just received the HTC touch fuze from at&t and it doesn't seem to have that special interface which it should have. It's just a simple list like the windows mobile interface. I tried changing the themes and whatnot but i'm going no where. I think I'm missing the touchflo 3d? Is there a way i can reinstall it?
Click to expand...
Click to collapse
Try going to settings items and make sure TF3D is checked.
A little detail
Press Start>Settings>and press Today icon > click the Items tab on the bottom and then make sure that Touchflo is checked and nothing else. Close by pressing OK and see if that launches Touchflo.
Okay, after the hard reset, it works. I think it's because i was too eager to use it so i didn't let it load all the way. But now i have another issue. The keyboard just randomly stopped working....?
I press the power button to turn the screen black and turn it back and then the keyboard works for like.. 5 seconds? What is going on!!!
can u help my problem?? i have polaris 2nd hand
my polaris dont have "touch keypad" & "touch keyboard" at input panel. how to solve this problem. thx
hellloo...
Do first soft reset, if don't help do a hard reset. I have same problem after installing new Rom, after restart the keyboard was fixed.
I can't too. I installed Touch-keyboard-keypad, Registry Enable HTC Keypad, as well as Finger Keyboard 2.1. I am able to select it, but it will return to normal keyboad. Touch keyboard and keypad shows not effect no matter how many times I'd selected it. I'd tried restart and restart, install reinstall.. it never seems to work. I went to SIP change too... everything seems ok while setting.. but the Touch keyboard and keypad never comes out.
Sigh... whole morning of setting it after flashing a new 6.5 rom... it's... really tiring...
I flashed another 6.5 rom before with those mentioned above, and it works well... im not sure.. why isn't it functioning this time.
anyone can help in this?
Hi,i've extracted longPress end key from HD to add more functions for HD2 . Here is the beginning :
I'll try to make a cab with this,i would know what function you think to be necessary to add to the list.Thanks .Of course for HD2 the power off function will be available .
please add a soft reset button/slide ( the one without the confirmation if i really want to soft reset the device)
Marcdu81 said:
Hi,i've extracted longPress end key from HD to add more functions for HD2 . Here is the beginning :
I'll try to make a cab with this,i would know what function you think to be necessary to add to the list.Thanks .Of course for HD2 the power off function will be available .
Click to expand...
Click to collapse
This will be a wonderfully handy feature. I'm looking forward to seeing it develop.
Initially I agreed with 'hyello' that a soft reset option could be good; however, on further thought, I wonder if perhaps this would make it too easy to accidentally hit when meaning to do something else. There are plenty of ways to perform a soft reset out there. I think having a quicklink icon (as with your HD2 Connections cab) is the better way to go.
+1 for a soft reset button or slider.
Maybe, if you could add the option to lock the screen using Co0kie's Home Tab v1.7.0 lock screen option.