I have a Fuze with the stock HTC rom on it. recently my fuze started doing something strange when I slide the keyboard out and change the screen orientation to landscape. when a text entry field is on the screen, in SMS sending, internet explorer, word. etc...anyplace I enter text, the text itself isn't readable. its all bunched up in one spot on the screen. when I change the screen orientation back to vertical it becomes readable. if i type to say, send an SMS i can't read it until i send it or reorientate the screen. I recently installed the following programs, not sure if any of them are causing the problem - Advanced Config 3.3, Sushi's Diamond TF3D Config, IM+ by shape services. I also have the fuze keyboard fix istalled. I already uninstalled both IM+ and the keyboard fix but neither of those seemed to be the cause (I reistalled them after checking to see if they were the problem by restarting the fuze-the problem still remained). Does anyone have this problem? Does anyone have any idea what might be causing the problem or how to fix it???
Thanks for any help
I've got a Touch Pro with the same issue
Hope someone has a solution, otherwise that little keyboard becomes quite useless
I had the same problem. Turning off Cleartype in landscape mode using advanced config finally fixed it for me!
I tried the cleartype solution. that did it. Must be some incompatibility with Adv. Config 3.3 and the new FUZE..hopefully this bug will be fixed in a subsequent version of Adv. config!!! Thanks for the help!
-chris
First download Diamond Tweak:
http://forum.xda-developers.com/showthread.php?t=409540&highlight=Diamond+Tweak
Once you have that downloaded on your phone, open it up and go to:
17. Diary > 17.7 ClearType in landscape mode > Enabled (advised)
This will allow you to type in landscape mode with cleartype enabled in most of the apps you will use, from internet to sms (text messages). However, this still does not work when trying to add a contact while in landscape mode. In order to add a contact using your keyboard, you will need to disable cleartype.
Cleartype is a know bug in WinMo 6.1
Hi,
I had the same problem you are having, and after reading around these forums, the fault seems to have nothing to do with Diamond Tweak or Advance Config or your IM program. The problem is WinMo itself. Cleartype in Landscape is screwed up.
Many people have the same symptoms:
- disappearing text in menus
- bunched up text
- invisible text in input boxes
The WinMo bug is not caused by the config tools, but perhaps exacerbated by them, because many people turn on Cleartype using these tools. To make things confusing, Cleartype can be globally activated in the registry, tweaked using config tools, switched in the WinMo UI settings, or switched inside individual applications. All these switches may or may not agree with each other, or over-ride each other - so it's hard to say when Cleartype is in effect. But I suppose you can tell, because your screen is messed up!
From what I can tell after an hour of reading around, there is no solution to the problem. The work-around is to turn OFF Cleartype in as many places as possible, particularly for landscape, since portrait is bug-free. The following global setting in the registry is a great place to start. It fixed my problems:
[HKEY_LOCAL_MACHINE \System\GDI \ClearTypeSettings]
"OffOnRotation"=dword :1
Some out there have called "turning off Cleartype in landscape" a fix. It isn't. A fix would be to make cleartype work. For me, I'm satisfied with the work-around.
Good luck.
Moil4gold49
had the same problem, went crazy and hard reset, added back tweaks carefully and same problem showed up. There is no problem with the stock at&t rom, it's just annoying to have to live in that "box". I went to the reg edit, it was set at dword :1, so I turned off cleartype in landscape mode (diamond tweak) and portrait mode start\settings\system\screen\ and it is working fine now. Thank you for your input, it lead me to the solution.
the registry hack solved my annoying problem too.
have searched this and other forums to find a solution,
thanks for sharing your experience
Thank you - this worked perfectly for me too.
Hm, old thread but I guess it's worth updating.
For anyone who is still encountering the landscape-cleartype bug, please note that it has been fixed in many of the newer ROMs due to driver updates. I can only vouch for the Da_G ROM (since that's the one I'm using), but ClearType does work correctly in landscape mode.
So if you haven't already, be sure to test-drive a new ROM.
Related
Hello
I am using VITO SMS-CHAT for messaging. Unfortunately typing in landscape mode is invisible. It is same using either HW or SW keyboard. When switched to the portrait orientation the text is visible.
I would like to check it this is application specific issue or if it is caused by my configuration.
I am not using advanced config mode and cleartype is off.
Any SMS-Chat user with same problem?
Thanks
I have the same problem as well. I think it's listed in the wiki that this is a known issue but so far I haven't come a cross a solution for it. Still looking...
VITO SMS-CHAT invisible typing - fixed
There is a new update 1.15 on www.iwindowsmobile.com that solves the issue.
Also export to txt file is added…
I saw the new version as well and that does correct the invisible text issue but now there seems to be a lag when I use the software or hardware keyboard. It's not as fast and responsive as the previous version.
Even the newest 1.16 version still doesnt fix the problem on my 320x320 samsung i780. I need to turn off clear type for the text to be visible, not a very optimal solution.
1.16 version
I have the same problem on my Samsung Epix i907. However, the clear type option does not work for me. What I do is actually hit enter to page down into another line of text, then press delete to move back up. The text becomes visible then and also larger. It's annoying, but that's my way around it.
How to get cleartype working correctly in landscape? I can't find any solution for touch pro. Is there any unofficial ROM, that supports cleartype in landscape wihout any problems? Without cleartype font looks very crappy
yeah, you cant get it to work correctly becasue it doesnt work at all
There was some 'fix' on the Kaiser. Though I can't say if it worked, since I've never owned a Kaiser. If taht did work, then maybe someone can develop on that?
As far as I know there was no problem with ClearType in landscape on Kaiser. You just had to activate it through registry or advancedconfig. But there seems to be a problem with the graphic driver on TP when using ClearType in landcape.
I've just tried PROven ROM and landscape cleartype works well, but with it came another problem - strange white glitches when opening/closing start menu, popups...
Happy New year everyone!
I have a problem that I could not find an answer to by doing a search. When I try to access my email folders in landscape mode I can see the folders but no words. (I can see the inbox folder but it does not say inbox next to it). Near some of the folders it looks as if all of the letters of the folder names have been place one on top of each other. It almost looks like a Chinese symbol. Sometime this is right next to the folder other times it is all the way across the screen. When the phone is in the portrait mode everything is fine. It is as if the screen isn't drawing properly.
I hope this make sense and I hope i am using the proper terms. Please go easy on me as I am new to this phone and really don't understand some of the thinks on this forum.
Thanks for any advice you might have!!!
I am seeing the same problem on my Fuze, but pretty much on everything that's text when I look at stuff in landscape mode.
When I try to enter text, the input box shows the cursor moving, but no characters show up. If I then close the keyboard, everything I typed is there in portrait mode. And I also see the jumble of text sometimes where there is a single "smudge" and the letters look like they're on top of each other.
This is VERY annoying, and I can't figure it out. I've only owned the Fuze about a week, but it seems to me it worked fine when I got it. It's as if I have installed some software (or perhaps it's one of the customization tools - I've run both Diamond Tweak and Diamond TF3D Config) that wiped out the fonts required for landscape mode.
The other thing is, it doesn't happen ALL the time, only about 80%. The rest of the time it works as it should.
Any help or ideas would be most welcome. If I can't see text entry in landscape mode, the flip out keyboard becomes useless, and I may as well have bought the thinner Touch Diamond.
I had this problem when I enabled ClearType in landscape mode...try to look at it if you have it enabled..and if so, disable it...
Thanks, that seems to have worked.
Is there a separate setting for landscape mode somewhere, or just the master ClearType on-off in Settings...Screen?
it's in Advanced Config or Diamont Tweak ..not sure, but one of it has that option
Tried that, and also modifying the registry directly, and neither worked. If the "main" ClearType setting is on in Settings...Screen, text in landscape mode is illegible no matter what else I do. The system seems to ignore the registry setting for turning it off in landscape mode.
While turning ClearType off does work, it's annoying to have to do it because the text in portrait mode looks so much better with it on. Oh well. I guess it's a bug in WinMobile 6.1.
In any case thanks for the quick response. I did a search in the forums here, and this is apparently a well know bug with no available workaround for the moment.
hmm, mine is working correctly...when I open Screen options in landscape, ClearType is Off and cannot be set to On...and in Portrait mode, it can be turned Off
DiamondTweak > 17.7 try that...if it doesn't work..hmm...flash ROMeOS or other ROM
lepermessiah said:
hmm, mine is working correctly...when I open Screen options in landscape, ClearType is Off and cannot be set to On...and in Portrait mode, it can be turned Off
DiamondTweak > 17.7 try that...if it doesn't work..hmm...flash ROMeOS or other ROM
Click to expand...
Click to collapse
On mine, screen options in landscape mode has cleartype set to "on" and cannot be turned off. It's grayed out. It follows the setting in portrait mode - if I turn it off there, it's off in landscape, if I turn it on there, it's on in landscape.
Tried DiamondTweak, made no difference.
ADDENDUM: Well, SOMETHING made a difference, because once I reset the thing, it now acts as you describe - I have ClearType on in portrait, and off in landscape. Woohoo!
Thanks much!
I'm trying to figure out what is wrong with my touch pro. When I do things like configure an e-mail account, or type in a URL into Opera or IE, in portrait mode, it is all good. Slide out the keyboard for typing and all the text in the field "shrinks" into a dot in the centre of the field!
Has anyone else observed this, it is getting quite frustrating as half the reason for buying the phone was the keyboard. However, the keyboard still functions as expected when typing SMS or e-mails!
TIA
Same issue here but I don't know why.
Check in see if Cleartype in landscape is checked in advanced config or fuze/diamond tweak. Keep it unchecked. I had a similar problem and this cleared it up for me.
Cheers
Done
Fixed it for me too! Love to know why! Does this mean I only have cleartype in portrait mode?
Hi all,
I am new to this forum, so please bear with me if I have posted in the wrong section.
I am with T Mobile UK and I have the MDA Vario IV.
Recently, I have had a strange problem when using my slide out keyboard. When I use the onscreen keyboard, I can see the text as I type. However, when I use the slide out keyboard, I can see the cursor moving as I type, but I can't see the text being typed. This happens when composing an SMS, typing into Google's search box, entering log in details for Facebook, etc etc.
As I am Deaf, I obviously use SMS and emails a lot, so this is a problem, as I find the slide out keyboard MUCH easier to use than the onscreen one.
Hope you can help.
Wayne.
How fast do you begin typing after you slide out the keyboard? I know sometimes when I begin typing too quickly after sliding it out that the cursor will move while I'm typing but no letters will be displayed...but then they all pop up at once.
Have you used a tweaking tool or registry editor to turn on ClearType in Landscape?
There is a known issue with the font not displaying.
David
winthropdc said:
Have you used a tweaking tool or registry editor to turn on ClearType in Landscape?
There is a known issue with the font not displaying.
David
Click to expand...
Click to collapse
Hi mate...
Ahhh, that could be it...let me try it & get back to you.
You are correct David....that WAS the problem!
Thanks - all working fine now
keyboard lag solved - possible software conflict
I had tried all the above fixes and they helped, but did not fully alleviate the lag. I was getting annoyed and wishing my hermes was still alive.
Then I remembered that the only real difference in my keyboard setups between the fuze and the 8525 was that I was using the iphone like full qwerty sip instead of the keyboard sip. i selected the finger unfriendly keyboard sip, and voila the slide ouy now has instantaneous response. no lag at all.
It seems to be that the full qwerty sip option forces a t9 function even when you have all that turned off.
Happy again except for the laggy shift between portrait and land scape.
now to find an iphone sip clone that doesnt affect the slideout. By the way this is with the recent stock att rom.
further issues with keyboard
The lagging keyboard issue continues to nag me. it seems to be related to the fuze having a difficuly time with switching to landscape mode. for instance in opera mini when i switched to landscape to type this there is no lag. if I am using messaging for text or email, when I switch to landscape, the lag occurs until I change the sip. it doesnt matter which sip i change to or from, just that it gets changed. i suspect that it has something to do with resetting the keyboard drivers. anyone else noting this problem. Anyone know of a fix? I have t9x turned off, cleartype turned off.