[PRJ] Unbricker ROM discovered (wildcard CID and Model ID) - Touch GSM ROM Development

------------------------------------------------------------------------------------------------
A user of this forum, 911sniper, provided us with an HTC test-only ROM:
http://forum.xda-developers.com/showpost.php?p=2912134&postcount=735
Alternate download link:
http://www.neufgiga.com/n/50-17/share/LNK5619492127a54134b/
Alternate download link:
http://www.4shared.com/file/82315205/ea440324/RUU.html
IMPORTANT: Read the steps below before flashing!!!!
------------------------------------------------------------------------------------------------
This is a ROM that can potentially overwrite and/or unbrick a device with an original (non-patched) SPL. It has a wildcard for Model ID (ELF0*****) and CID (11111111).
I don't have a bricked Elf but I tested it with an original CID-locked SPL and it overwrote it and flashed a new generic HTC ROM with the following:
IPL 2.11.1002
SPL 2.11.1000 MFG
ROM version: 2.11.0. WWE
ROM date: 08/14/07
Radio: 02.98.90
CE OS 5.2.1620 (Build 18125.0.4.2)
Here are the steps to make it work:
Download this ROM from the link above
Two ways to flash:
Rename the file to ELF0IMG.nbh if you want to flash from SD card (you must format the card to FAT32 first)
Put the ROM in a RUU folder that contains the RomUpdateUtility.exe. You must remove any other .NBH files in that folder first.
Start your bricked Elf in bootloader mode (hold down camera button and reset). If you are using the SD card, it should flash right away.
NOTE: If the device flashed successfully but is now stuck at the new boot screen, you are still ok. Now you can flash ANY shipped ROM at the bootloader (if you have an Elfin, flash only an Elfin shipped ROM) and your device will be running again. If you can't flash a shipped ROM after successfully flashing the Unbricker ROM, then make a Gold Card and follow the steps in that thread.
NOTE: If the Unbricker ROM doesn't work then make a Gold Card and use it again on that card.
Click to expand...
Click to collapse
NOTE:
One thing I noticed is that you cannot use the white screen method (elf-uspl.exe) after you flash this ROM. If you try that, then the message "Not in use" pops up under the penguin. However, you can flash ANY shipped ROM from bootloader after this unbricker ROM has been flashed. From there, you can do white screen method and then flash the Hard-SPL/USPL/cooked ROM.
Please don't PM me about this (e.g. "I need help!" etc...), just post in this thread. I'm pretty busy these days.

dsixda said:
Ok who wants to try this?
Click to expand...
Click to collapse
Thanks again dsixda. Do you never sleep?

dsixda said:
I don't think this can be flashed from the ROMUpdateUtility.exe (didn't work for me), so you MUST flash from SD card.
Click to expand...
Click to collapse
I DID flash it from ROMUpdateUtility.exe without using any microSD ^^

I am Speechless

Sonny-Black said:
I DID flash it from ROMUpdateUtility.exe without using any microSD ^^
Click to expand...
Click to collapse
Hi, can u help me how to open an nbh file or anyone else
because i bricked my elf...
thank you very much

pinoy85 said:
Hi, can u help me how to open an nbh file or anyone else
because i bricked my elf...
thank you very much
Click to expand...
Click to collapse
It's obvious you did not read the instructions because you are asking how to open an NBH. The steps are right in front of you in clear English. Is this how you bricked your Elf, by not reading the instructions?
Anyways, rename it to ELF0IMG.nbh and copy it to a formatted SD card.

Sonny-Black said:
I DID flash it from ROMUpdateUtility.exe without using any microSD ^^
Click to expand...
Click to collapse
Cool.... I tried the RomUpdateUtility.exe when I had a shipped ROM on it, but it said Invalid Model ID. Maybe I was too sleepy and tried the wrong ROM

Does an uncracked SPL (or a bricked) elf(in) can Flash it? (RUU or SD-FLASH)
If not, it's useless...

911sniper said:
Does an uncracked SPL (or a bricked) elf(in) can Flash it? (RUU or SD-FLASH)
If not, it's useless...
Click to expand...
Click to collapse
Yes, like I said, I had flashed an unpatched SPL (CID-locked) on my Elfin when I tried it, and it was able to successfully flash.

Well according to this guy it worked on his brick.
http://forum.xda-developers.com/showpost.php?p=2913859&postcount=11

dsixda said:
Yes, like I said, I had flashed an unpatched SPL (CID-locked) on my Elfin when I tried it, and it was able to successfully flash.
Click to expand...
Click to collapse
what's IPL&SPL(unpatched) based on?

dsixda said:
Yes, like I said, I had flashed an unpatched SPL (CID-locked) on my Elfin when I tried it, and it was able to successfully flash.
Click to expand...
Click to collapse
con mi elfin cid bstar301 no ha funcionado.... en el modo de flasheo desde la sd no hace nada, abre el bootloaders tricolor nada mas....

awoken said:
Well according to this guy it worked on his brick.
http://forum.xda-developers.com/showpost.php?p=2913859&postcount=11
Click to expand...
Click to collapse
Oh good, I hadn't noticed that ;-)
I've put up a poll at the top of this thread to see if it actually works for people.

911sniper said:
what's IPL&SPL(unpatched) based on?
Click to expand...
Click to collapse
I had 2.21/2.21.

bigleroy said:
con mi elfin cid bstar301 no ha funcionado.... en el modo de flasheo desde la sd no hace nada, abre el bootloaders tricolor nada mas....
Click to expand...
Click to collapse
This is an English thread, although it looks like it did not work for you.

bigleroy said:
con mi elfin cid bstar301 no ha funcionado.... en el modo de flasheo desde la sd no hace nada, abre el bootloaders tricolor nada mas....
Click to expand...
Click to collapse
It Looks Like This Guy Has A BSTAR301 Same As Me.
It Also Didnt Work For Me This What I Did
- Tried To Update To The New Rom 3.07
- This Will Brick Your Phone So It Did
- Tried To Flash From SD With This Rom(No Success)
Had To Use The GoldCard.img To Unbrick - Your Goldcard wiki Is The Best To Unbrick (Personal Opinion)
I did flash this rom just to check it out it is a Manufacture Test Only ROM So Im Sure It Can Unbrick Some Phone But Not Mine

dsixda said:
It's obvious you did not read the instructions because you are asking how to open an NBH. The steps are right in front of you in clear English. Is this how you bricked your Elf, by not reading the instructions?
Anyways, rename it to ELF0IMG.nbh and copy it to a formatted SD card.
Click to expand...
Click to collapse
I followed all the steps but it doesnt work. I just wondering if there somebody to help me how to open an nbh file because there so many nbh file cooked rom...en i wanna try it...
thanks for reply....

don't work for spl 2.26 version one
first i got a cht version black
flash this mfg and got a test version
then flash htc indian wwe(fogot that things contain spl 2.26) tri color flash got ipl 2.11 spl 2.26 tri color screen then ruu stop got error 294.
after that turn on auto tri color screen. cant' use this nbh flash again at all include tf card or ruu.
then this phone half brick.

Only one person tried it so far, according to the poll

pinoy85 said:
I followed all the steps but it doesnt work. I just wondering if there somebody to help me how to open an nbh file because there so many nbh file cooked rom...en i wanna try it...
thanks for reply....
Click to expand...
Click to collapse
Why do you want to "open" the NBH? If you extract the files from the NBH then the unbricking process will NOT work (unless you want to take the OS out to make your own "cooked" HTC factory test ROM )

Related

Need Original SPL 1.33.1004 from HTC Magic Vodafone

Hello or we say´s in Germany "Moin"
I Need the Original SPL from the HTC Magic, anybody can help me there?
I search now 4h and i cant find anything that can help me
Thx
z3ko
Z3ko said:
Hello or we say´s in Germany "Moin"
I Need the Original SPL from the HTC Magic, anybody can help me there?
I search now 4h and i cant find anything that can help me
Thx
z3ko
Click to expand...
Click to collapse
Is this what you are looking for (link)?
No thanks that is the orig recovery.img
Z3ko said:
Hello or we say´s in Germany "Moin"
I Need the Original SPL from the HTC Magic, anybody can help me there?
I search now 4h and i cant find anything that can help me
Thx
z3ko
Click to expand...
Click to collapse
Nobody has dumped it - only got it from the Nandroidbackup...
a friend have a Vodafone Magic with the 1.33.1004 spl, is it possible to backup his spl and flash it on my magic?
Z3ko said:
Hello or we say´s in Germany "Moin"
I Need the Original SPL from the HTC Magic, anybody can help me there?
I search now 4h and i cant find anything that can help me
Thx
z3ko
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showpost.php?p=3857151&postcount=10
Crios said:
Try this
http://forum.xda-developers.com/showpost.php?p=3857151&postcount=10
Click to expand...
Click to collapse
Thx Your spl already i have tested,well i think there make the magic al littlebit faster but is it not the original 1.33.1004, i woud like to use OTA Updates without Pc an any mod recovery.img. Flash the HTC 100% back
why there is no one dump the 1.33.1004? i didnt understand this
Z3ko said:
Thx Your spl already i have tested,well i think there make the magic al littlebit faster but is it not the original 1.33.1004, i woud like to use OTA Updates without Pc an any mod recovery.img. Flash the HTC 100% back
why there is no one dump the 1.33.1004? i didnt understand this
Click to expand...
Click to collapse
With my SPL is possible use OTA Updates without Pc an any mod recovery.img.
I think that this SPL is (for Now) only way to use OTA and return to 100% original system.
sry. I have try to update with you Spl and its not working with original recovery.img
Z3ko said:
sry. I have try to update with you Spl and its not working with original recovery
Click to expand...
Click to collapse
you need a haykuro recovery to flash my spl on device
you can boot (not FLASH!!!) with mod recovery
ES.:
fastboot boot recovery-haykuro.img
after your device restart to haykuro recovery an its possible install my SPL
in the end you have always a original recovery and the my SPL installed
@Crios,
What method should I use to flash your SPL? Fastboot? ADB? Or via Haykuro recovery and renaming it to update.zip?
Thanks!
Okay...
I haved flashed your SPL with the modded recovery and trying to update with the original recovery.img (power + home)
Log:
--Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:No Siganture (136 files)
E:Verification failed
Installation abortet.
=(
Z3ko said:
Okay...
I haved flashed your SPL with the modded recovery and trying to update with the original recovery.img (power + home)
Log:
--Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:No Siganture (136 files)
E:Verification failed
Installation abortet.
=(
Click to expand...
Click to collapse
MMMmmm...this problem evidences that you not have right original recovery.img flashed on your device
E:No Siganture (136 files)
where can i find the orig. recovery?
okay i find the orig. recovery. and it works thank you very mutch *kiss* xD
the reason was that i have forgotten to "fastboot erase recovery" before i flash the new orig. recovery
1. Flash your SPL with Modified Recovery.img
2. Erase Recovery with "Fastboot erase Recovery"
3. Write the Original Recovery with "Fastboot flash recovery recovery.img"
4. OTA Update works!
Crono said:
@Crios,
What method should I use to flash your SPL? Fastboot? ADB? Or via Haykuro recovery and renaming it to update.zip?
Thanks!
Click to expand...
Click to collapse
via Haykuro recovery and renaming it to update.zip
Z3ko said:
Hello or we say´s in Germany "Moin"
Click to expand...
Click to collapse
hoo...Looks like he comes from "Nordeutschland"---Moin!
Z3ko said:
okay i find the orig. recovery. and it works thank you very mutch *kiss* xD
Click to expand...
Click to collapse
can you tell us where do you find it or please upload this one for us.
Thx
0. Install Crios SPL 1.33.2004
1. Download Recovery Restore.zip and unzip the folder on your desktop
2. Turn your Phone in Fastboot and run Recovery Restore.cmd
3. Done
Crios said:
via Haykuro recovery and renaming it to update.zip
Click to expand...
Click to collapse
Thank you soooo much
You can also find the Original SPL here

please help me urgent

i flashed incorrect rom and kaiser always start automatically on boot loader mode no normal flashing possible even official
when try to flash from sd card formatted fat 32 it passes the boot loader and says LOADING... Whit a blue font and stays like that
please help me
does it bricked ?
i think i accidentally flashed radio rom to main rom
May be worth trying USB to flash re-formatting SD etc........
i tried but it says only loading
meraklinext said:
i think i accidentally flashed radio rom to main rom
Click to expand...
Click to collapse
You just cant flash a radio to main OS. Extract a Shipped ROM, and flash it through SD card. It should flash fine if you see your boot loader. Look into Wiki or stickies for how to flash using SD card.
i check it but can not find a soln
on boot loader it says
red : RUUNBH
KAIS130
SPL-1,93,0000
CPLD-8
UNABLE TO FLASH FROM SD
UNABLE TO FLASH FROM USB
meraklinext said:
i check it but can not find a soln
on boot loader it says
red : RUUNBH
KAIS130
SPL-1,93,0000
CPLD-8
UNABLE TO FLASH FROM SD
UNABLE TO FLASH FROM USB
Click to expand...
Click to collapse
You need 3.29 or higher SPL! Install that first and then install a custom ROM. 1.93 is not going to cut it!
how do i can install it
please help
because the kasier is not workable
can u give me an link
that how can i do that
Flashing Your First Kaiser Rom (For Noobs)
i did eveting but it is same when i try to instal cmonex
it remains on loading
and when i try to install a rom it holds at %0
please help
See here for removing RUUNBH... please search before starting a new thread.
http://forum.xda-developers.com/showthread.php?t=423486
Thanks
Dave
meraklinext said:
i did eveting but it is same when i try to instal cmonex
it remains on loading
and when i try to install a rom it holds at %0
please help
Click to expand...
Click to collapse
Ship me your phone, and I will load it for ya!
Seriously dude, you need to follow the instructions word by word. Or else you wont be install HardSPL.
There is nothing we can do. There is instructions and just follow it, and it will work.
Also ask the question in the thread from now on, you might get more help there....

Chinese guy play htc ozone

Now i know how to flash spl and rom,thanks,ookba
next is my thinking.
1.application unlock
2.flash hardspl
3.flash rom
weather last step is right or not?thanks
lufu said:
Now i know how to flash spl and rom,thanks,ookba
next is my thinking.
1.application unlock
2.flash hardspl
3.flash rom
weather last step is right or not?thanks
Click to expand...
Click to collapse
If anybody can prompt me?
Now my phone is already hardspl,i want to flash 3volution series rom.
When i flash the rom,i want to know weather the device need to come into the multicolor bootloader screen?or,run romupdateutility.exe directly when synced.
thanks very much!
lufu said:
if anybody can prompt me?
Now my phone is already hardspl,i want to flash 3volution series rom.
When i flash the rom,i want to know weather the device need to come into the multicolor bootloader screen?or,run romupdateutility.exe directly when synced.
Thanks very much!
Click to expand...
Click to collapse
ok,i finish all,thanks to oobka and jockyw2001
lufu said:
ok,i finish all,thanks to oobka and jockyw2001
Click to expand...
Click to collapse
Who can tell how to write my cdma num into ozone and how to unlock sim(i am in China)
Call Verizon.
DyMiC said:
Call Verizon.
Click to expand...
Click to collapse
How can I call,I'm in china

[q] pls help!!!! Bricked phone

I used a HTC desire s... HTCdev bootloader unlocked s-on and rooted ...
This morning, was checking google play when i found a FONT INSTALLER app. i decided to try it. After installation, i opened it to use a font on their server, i backed up the stock font. after applying the font, my phone freezed up so i decided to restart maybe dat would fix it.
I rebooted and my fone got stucked at the "HTC quietly brilliant" bootscreen... i tried doing factory reset. I loaded bootloader then selected factory reset. i was directed to 4ext. I didnt get the reset cos it keeps stucking up at the same screen. So i decided to wipe.. I selected the "WIPE ALL PARTITION XCEPT SD CARD" :'(
...
Now my Phone doesnt boot up. After the first "HTC (without the quietly brilliant)" shows up... the screen goes dark till....
....
Pls i need help on how to put my phone back on.
GURUs in the house PLEASSSSSSSEEEEEEEEEEEEE!!!!
Funny problem you have
What it shall boot? You have wiped everything from it, so there are no files.
I guees you have not make a Nandroid backup, so copy some ROM to your SDcard and flash it from 4EXT.
DO NOT forget to flash the boot.img afterwards
amidabuddha said:
Funny problem you have
What it shall boot? You have wiped everything from it, so there are no files.
I guees you have not make a Nandroid backup, so copy some ROM to your SDcard and flash it from 4EXT.
DO NOT forget to flash the boot.img afterwards
Click to expand...
Click to collapse
Tanks for your reply..
But pls can u make it clearer. I don have any backup... The only backup i have are my apps, non for the system files.
I can also get the RUU ICS ROM i downloaded from HTCdev. Can i do something with this? Thanks,
If you was on ICS go here and skip right to B) section.
If you was on GB go here and pick the version you was before. As if you was on Sense 2.1 you would flash RUU_Saga_HTC_Europe_1.47.401.4_signed_prerooted. If you was on Sense 3.0 then your pick will be HTC_Europe_2.10.401.8_deodexed_prerooted
Or just flash a custom ROM, there is plenty of choise. I would recommend Desire XS
amidabuddha said:
If you was on ICS go here and skip right to B) section.
If you was on GB go here and pick the version you was before. As if you was on Sense 2.1 you would flash RUU_Saga_HTC_Europe_1.47.401.4_signed_prerooted. If you was on Sense 3.0 then your pick will be HTC_Europe_2.10.401.8_deodexed_prerooted
Or just flash a custom ROM, there is plenty of choise. I would recommend Desire XS
Click to expand...
Click to collapse
May Almighty ALLAH replenish your knowlegde (Cos i can see u"re a muslim from your username)
Pls would the flashing be from 4ext or my pc using cmd? I have this pacman rom i downloaded sometimes ago, i tried "install from zip" as 4ext states it.. Its still not booting!
its_Khal said:
May Almighty ALLAH replenish your knowlegde (Cos i can see u"re a muslim from your username)
Pls would the flashing be from 4ext or my pc using cmd? I have this pacman rom i downloaded sometimes ago, i tried "install from zip" as 4ext states it.. Its still not booting!
Click to expand...
Click to collapse
Well Allah has nothing to do with my nickname, but thank you anyway since I believe all religions worship the same God.
And it is not booting because you have missed an important step:
amidabuddha said:
DO NOT forget to flash the boot.img afterwards
Click to expand...
Click to collapse
Copy the ROM from your Sdcard to the PC. Open it and extract the boot.img that you will find inside. Then flash it with a command from your PC (you can search the forum how exactly).
And if still does not boot then you will be one of the lucky guys with the Hitachi panel so you will have to try a Sense ROM. Download, flash through the recovery, flash the boot.img as described above
amidabuddha said:
Well Allah has nothing to do with my nickname, but thank you anyway since I believe all religions worship the same God.
And it is not booting because you have missed an important step:
Copy the ROM from your Sdcard to the PC. Open it and extract the boot.img that you will find inside. Then flash it with a command from your PC (you can search the forum how exactly).
And if still does not boot then you will be one of the lucky guys with the Hitachi panel so you will have to try a Sense ROM. Download, flash through the recovery, flash the boot.img as described above
Click to expand...
Click to collapse
Ok I got that but i think my USB Debugging aint checked in the setting.... Would my pc detect my fone?
its_khal said:
ok i got that but i think my usb debugging aint checked in the setting.... Would my pc detect my fone?
Click to expand...
Click to collapse
woooooo!!! Woooooooo!!! Wooooooooo!!!
Amidabuddahhh!!! You are a god right now... My phone is working now. Thank you a million fold.
God bless you!!!
I flashed the image as you said. That same pacman rom...
The desire xs you mentioned. Hope its got no bug all? Cos i need all things working right in my phone.
Exoecting your reply.
Thanks thanks thanks!!!!!!!!!!!!!!!
its_Khal said:
The desire xs you mentioned. Hope its got no bug all? Cos i need all things working right in my phone.
Click to expand...
Click to collapse
Congratulations
I am using it for some time now I had no bugs, reboots. You can read the feedback of the users in the ROM's thread and then decide.
Just remember: when you are S-ON you have to flash the boot.img separately from fastboot for ANY new ROM that you are installing!
amidabuddha said:
Congratulations
I am using it for some time now I had no bugs, reboots. You can read the feedback of the users in the ROM's thread and then decide.
Just remember: when you are S-ON you have to flash the boot.img separately from fastboot for ANY new ROM that you are installing!
Click to expand...
Click to collapse
Ok thanks... I really appreciate!
its_Khal said:
Ok thanks... I really appreciate!
Click to expand...
Click to collapse
Hello... Pls one more thing... The ICS.exe rom i got from HTCdev would not install... And was the same i used to upgrade from GB to ICS.
Any help to fix dat.. Pacman got much bugs.
its_Khal said:
Hello... Pls one more thing... The ICS.exe rom i got from HTCdev would not install... And was the same i used to upgrade from GB to ICS.
Any help to fix dat.. Pacman got much bugs.
Click to expand...
Click to collapse
It would not because you have to lock the bootloader first. Better go back to post #4 and read the first line again. It will save you the trouble to unlock and flash a recovery again.
amidabuddha said:
It would not because you have to lock the bootloader first. Better go back to post #4 and read the first line again. It will save you the trouble to unlock and flash a recovery again.
Click to expand...
Click to collapse
Ok now i get the whole thing.... I cant install the RUU cos i got an Unlocked bootloader! Fine.
But can i get a Flashable/zip ICS that would work/look xactly like the main RUU w/o bugs?
Read my last post again. The second sentence
Sent from my HTC Desire S

[SCRIPT] SuperWipe Script - Use before flashing ROMs

SuperWipe Script
This script was created by mike1986. and he give me permission to port this from his Android Revolution HD ROMs.
So all credits to him and his team!
mike1986. said:
SuperWipe is used to clean your current phone partitions to make it ready for a brand new ROM version to be installed.
This script will erase and format your data, system, boot and cache partition.
Your SD card will remain untouched FAT32 and it's recommended to leave it like that.
Click to expand...
Click to collapse
DOWNLOAD
MD5: 27a518cecd483b28faaf9a0e66e4454a
Not tested yet! Please test and report!
So before you flash any ROMs, flash the SuperWipe script in recovery. It will wipe out the partitions and reboot back into recovery.
Make sure you flash a ROM or else you can't boot up! (Unless you flash an RUU)
Hit Thanks button if you use it!
xpirt
Android Revolution HD
xpirt said:
SuperWipe Script
This script was created by mike1986. and he give me permission to port this from his Android Revolution HD ROMs.
So all credits to him and his team!
DOWNLOAD
MD5: 27a518cecd483b28faaf9a0e66e4454a
Not tested yet! Please test and report!
So before you flash any ROMs, flash the SuperWipe script in recovery. It will wipe out the partitions and reboot back into recovery.
Make sure you flash a ROM or else you can't boot up! (Unless you flash an RUU)
Hit Thanks button if you use it!
xpirt
Click to expand...
Click to collapse
Hi Mike, as ARHD user I would be very happy if you would decide to develop your ROM for this phone too.....
I've really appreciate yor great work for my DHD and now (a few days) a new One Mini will be in my hands and it would be great to have your work one more time
Muflone71 said:
Hi Mike, as ARHD user I would be very happy if you would decide to develop your ROM for this phone too.....
I've really appreciate yor great work for my DHD and now (a few days) a new One Mini will be in my hands and it would be great to have your work one more time
Click to expand...
Click to collapse
lol Why you quoted me xD? Btw you can mention him like this: @mike1986.
So he can read your message.
Thx xpirt, didn't now
sono un gran fruitore di XDA da "passivo", quindi non conosco bene i meccanismi del blog
Muflone71 said:
Thx xpirt, didn't now
sono un gran fruitore di XDA da "passivo", quindi non conosco bene i meccanismi del blog
Click to expand...
Click to collapse
You're welcome!
Si tranquillo, e cmq è un forum non un blog..xD
xpirt
xpirt said:
You're welcome!
Si tranquillo, e cmq è un forum non un blog..xD
xpirt
Click to expand...
Click to collapse
.......this gives you a clear vision of my blog/forum attendance :silly:
btw, luckily my knowledge of Android devices is much better.
One Mini has arrived today, hope someone will root it soon...... too many appz I want to remove (blinkFeed first)
Muflone71 said:
.......this gives you a clear vision of my blog/forum attendance :silly:
btw, luckily my knowledge of Android devices is much better.
One Mini has arrived today, hope someone will root it soon...... too many appz I want to remove (blinkFeed first)
Click to expand...
Click to collapse
Haha yeah xD
xpirt
i lost all my data
and now i cant flash rom
gramateas said:
i lost all my data
and now i cant flash rom
Click to expand...
Click to collapse
U NO READ OP??
It erase all you have on your phone: system, data, cache and boot partitions.
This means that now you have to flash a Rom and a kernel.
xpirt
xpirt said:
U NO READ OP??
It erase all you have on your phone: system, data, cache and boot partitions.
This means that now you have to flash a Rom and a kernel.
xpirt
Click to expand...
Click to collapse
i lost all the files from sdcard
and i cant connect to pc to transfer rom and kernel
gramateas said:
i lost all the files from sdcard
and i cant connect to pc to transfer rom and kernel
Click to expand...
Click to collapse
This doesn't touch sdcard.
And if you can't connect phone to pc, this means you don't have drivers correctly installed.
This script make totally different things from this. Make sure you didn't make other things before or after.
xpirt
i cant connect because i only boot in recovery
gramateas said:
i cant connect because i only boot in recovery
Click to expand...
Click to collapse
Recovery->Mount USB storage.
xpirt
i have twrp recovery
gramateas said:
i have twrp recovery
Click to expand...
Click to collapse
Mount->Mount USB.
xpirt
i dont have that option
gramateas said:
i dont have that option
Click to expand...
Click to collapse
lol which version you have?
xpirt
2.6.0.0
gramateas said:
2.6.0.0
Click to expand...
Click to collapse
The button MOUNT is there?
The TWRP thread screenshot has it.
xpirt
yes the button mount is there

Categories

Resources