Related
I have installed S.I.V.'s BRIGHTPHONE rom (great thing btw, thanks!) and enjoy using it. One problem though is that I get the US keyboard instead of the Swedish 041D, which it originally came with. Typing with it is almost impossible finding the letters ä,ö,ü,å. I tried to find the Registry or file .....\keybd\Locale to change keyID, without success. Can not find Total Command inmy wizard either. Anyone who can help? All suggestions are welcome and highly appreciated!
Thanks!
bide59 said:
I have installed S.I.V.'s BRIGHTPHONE rom (great thing btw, thanks!) and enjoy using it. One problem though is that I get the US keyboard instead of the Swedish 041D, which it originally came with. Typing with it is almost impossible finding the letters ä,ö,ü,å. I tried to find the Registry or file .....\keybd\Locale to change keyID, without success. Can not find Total Command inmy wizard either. Anyone who can help? All suggestions are welcome and highly appreciated!
Thanks!
Click to expand...
Click to collapse
There is a wiki page that deals specificaly with that. I have not had to change the keyboard locale... so I am not too familiar with that. Also BRIGHTPHONE does not have additional language file in it.
That rom is so old and so slow. you need to upgrade anyway.
Thanks siv
Ok, I just liked the functions and look but consider to upgrade to ANGEL. Thanks for your reply and THANKS for all your work with the ROMs. Good work.
Hi, I've been having this problem for a couple months now, ever since I had to get a new Fuze after losing my old one. I've been trying to solve this problem for a couple days now and I'm really at my wits' end. If anyone has any ideas, it would help me out greatly! I have searched this site for any answers and have not seen any solutions so far.
Anyways, for some background, I have been living in China for the past 6 months and on my previous Fuze installed a Chinese font pack (have used Yahei, Sunglobe to no difference) as well as some Chinese inputs (Z4A4 input, also tried PlumSIP pro) to type in Simplified Chinese to people here. I was using the standard AT&T version (didn't change anything on startup), and it was working fine to send and receive. After I got this new Fuze, I tried to do the same thing in installing the language pack and the Input SIP, but then all my recipients complained that all they saw was question marks. Now, I can read Chinese texts just fine on my phone, but when I send them, no one can read mine. I tried to copy and paste chinese that people had sent me to isolate whether it was just the Input's problem, but copy and pasting also results in only question marks. I reinstalled the language and Input cabs to see if installation went wrong, no fix. Yesterday I went to more extremes and first hard reset my phone to start from scratch...yet still had the same problem. Finally I decided to try a hard reset to basic Manila and not the ATT version, and after getting a basic Manila working, I STILL had the same problem.
So, please, XDA gurus! help! i'm so frustrated! All my other programs work fine, and english of course is no problem in texting, just chinese characters.
Hi,
Go to Messaging---options, check "use unicode if necessary", this may solve your problem.
Yes, THANK YOU! That worked perfectly! I never would have guessed something like that...or even know what unicode referred to. I'd been tearing my hair out for a while about this, thanks again!
you are welcome
I have a similar problem as Fuji, but only need to be able to see Chinese fonts for received messages. I just upgraded my stock HTC rom and with this new rom, lost the ability to receive or view Chinese fonts in text messages and word docs.
Is their a setting with the TP to turn on the Chinese fonts (not as main language, just ability to view)?
I got the AT&T FUZE for a while now, but can't find anything on getting my phone to read chinese. can anyone help me with this???????
HELP HELP HELP
Just google some MS Yahei font to install.
上网搜个雅黑的字体包，安装上就行了。
After i search around.. i found the best working for wm 6.5
"RickyMSYH6.0" google for it
silvervt23 said:
I got the AT&T FUZE for a while now, but can't find anything on getting my phone to read chinese. can anyone help me with this???????
HELP HELP HELP
Click to expand...
Click to collapse
Install the following link provided, it worked for me running stock HTC ROM WM6.1 Build 20764. Just to let you know this is the Offcial Chinese support from HTC
here you go
http://rapidshare.com/files/135293786/uhei00m-gray.cab.html
Note* after install reboot the device and u should find it working
Cheers
[email protected]
My method is, first, install the necessary font. To do this, install CE-Star for WM5/6 trial version 2.8 R3c. It can support both Chinese and Japanese display. Chinese input will be disabled after trial expires but Chinese and Japanese display function never expires It needs to be installed through ActiveSync only.
For Chinese input, there are a few options, like 点讯http://www.dayhand.com/ or Sogou for WM. They are free software.
[email protected] said:
Install the following link provided, it worked for me running stock HTC ROM WM6.1 Build 20764. Just to let you know this is the Offcial Chinese support from HTC
here you go
http://rapidshare.com/files/135293786/uhei00m-gray.cab.html
Note* after install reboot the device and u should find it working
Cheers
[email protected]
Click to expand...
Click to collapse
This site rocks...that cab worked perfectly on my touch pro (Energy ROM English)...thanks!
Chinese reading
I am using already some time the following CAB which installs Chinese Fonts on my HTC.
sunglobe.cab
fontpatch.cab
Tested it with stock, EnergyROM and TAEL rom, no problems.
Google for it, download it and there you go.
How about input?
Which one do you all recommend?
I use font support from Ricky mentioned above and IME only from 小熊工作室 here
http://www.studiokuma.com/wm/?section=mui
I'm using what that have stated in post #4 to enable Chinese characters viewing.
For input, I'm using ZTA4.
I'm able to send out Chinese characters sms'es.
But all the receiver receives is "???????" only, instead of desired Chinese characters.
This has been tested on Sony Ericsson phone as receiver phone.
What's the problem here?
The ROM I'm using is stated under my sig.
It worked on last version of TAEL ROM, but not this.
Hi all
I am glad that there is a post regarding Chinese display and input on English rom finally. I am a new comer for Windows mobile world. I managed to unlock my Touch Pro and able to install cooked rom. However, I always has problem for Chinese support.
Personally, I would like to stick with TEAL rom. However, after I installed the IME from 小熊工作室 on latest TEAL rom, the screen had been frozen.
Is it possible if anyone of you could share the experiences for installing Chinese support with TEAL rom? A step by step guide would be wonderful. Actually, I just need my Touch Pro with Traditional Chinese display and hand-writing input feature.
Sorry, I understand that it is beginner question. I did try to find the solution by myself, but obviously, I am not smart enough to get the job done. Please give me a hand.
Thank you very much in advance.
wiltonw said:
Personally, I would like to stick with TEAL rom. However, after I installed the IME from 小熊工作室 on latest TEAL rom, the screen had been frozen.
Click to expand...
Click to collapse
Did you install the full Chinese support from 小熊工作室 or IME only? The cab for IME only should have size only 1.6MB. I think I tried his font support on WM6.5 a while ago but didn't work out (can't remember what went wrong). I looked around and Ricky got the most beautiful font and fixed the Chinese word-wrap problem in Viigo when reading RSS news, so I stick with it.
Then I looked around for input support. All the IMEs I used before don't work under WM6.5 except CE-star, but it requires its own font support. Finally I re-visit 小熊工作室 and tried the IME-only cab, and it works.
Right now this is my favorite combination under WM6.5. I install Ricky's font support through UC during re-flashing, and install 小熊 IME afterward because the installation asks if I want to retain the word suggestion function in English IME. If you install it through UC, the customization will hang at the point the installation asking for your choice.
I'm not 100% positive, but I thought I tried this combination under TEAL's earlier build with no problem. I could be wrong...
Good luck.
Personally i m using 'najera--PlumSIP Pro VGA V6.1.0008.cab' for ime and 'SamauChinesePlus20080310.cab' for chinese support
They both worked perfectly, with any rom i tried. I've been using them since I got my touch pro in march this year.
U can use any chinese support package. as long as it works, there will be no difference, but I strongly recommend using this ime. It is so perfect with a nice skin.
According to 小熊工作室's site. The current version do not support WM 6.5.
Did anyone managed to use the above chinese input on WM 6.5?
Thanks!
Ooo.. so there's an IME-only cab? I can't seem to find it.
Can you post the link over here? Thanks in advance!
limsy said:
According to 小熊工作室's site. The current version do not support WM 6.5.
Did anyone managed to use the above chinese input on WM 6.5?
Thanks!
Click to expand...
Click to collapse
I am using his msje-ime cab. I only install 全螢幕輸入 and 注音 ime and it works fine on my Fuze with Energy ROM Akeo. (I think 注音 is required for 全螢幕輸入). It had been not working for couple of builds before, but it's working perfectly now. I haven't tried NRGZ28's new Energy ROM Leo but I think it will still work.
I am using Leies CE-Star Big5 System and IME Leies CE-Star Jianyi which also works perfectly on my Touch Pro with Energy ROM 6.5.
I like it that this IME support the Chinese JianYi (or call 速成) on the hardware keyboard
I got a suggestion over here.
Can the recommended working fonts & inputs being uploaded again directly by the one who suggested instead of asking people around here to google around?
Mediafire, RapidShare, and whatever you can think of.
limsy said:
According to 小熊工作室's site. The current version do not support WM 6.5.
Did anyone managed to use the above chinese input on WM 6.5?
Thanks!
Click to expand...
Click to collapse
I've been using 小熊工作室 IME only on the RRE WM6.5 ROMs, now the rRedux WM6.5 ROMs fine. But I'm using Ricky's font support because of the better looking font and working Chinese word-wrap in Viigo.
limsy said:
Ooo.. so there's an IME-only cab? I can't seem to find it.
Can you post the link over here? Thanks in advance!
Click to expand...
Click to collapse
Here's the link
http://www.studiokuma.com/wm/?section=support
You have to check all checkboxes on the page, and uncheck the last checkbox again, then all the files will appear as a result of the javascript. The IME I'm using is the imeonly.cab.
Hi there,
I am user of N1, and I am seeking for a workable HTC_CIME that works on this device. As i see, there were already a mod on HTC_IME English KB. However, I am a Chinese user and seeking for a Chinese one for daily use.
I would be grateful if anybody may help. Really thanks!!
I hacked one together really quickly but it seems seriously buggy. You could give it a try if you want tho.
What's not working at all is the English (QWERTY) input. It doesn't draw itself correctly. I have no idea on how to fix that. Switching to Chinese input seems to work. I looked up a Chinese sign and entered it successfully. I have no idea what I wrote since I don't understand the language...
Maybe its unusable, maybe not. It's at least something
http://www.mediafire.com/file/y3um2am3cwo/HTC_CIME_buggy.zip
+1 here..
i missed HTC_CIME!
jonasl said:
I hacked one together really quickly but it seems seriously buggy. You could give it a try if you want tho.
What's not working at all is the English (QWERTY) input. It doesn't draw itself correctly. I have no idea on how to fix that. Switching to Chinese input seems to work. I looked up a Chinese sign and entered it successfully. I have no idea what I wrote since I don't understand the language...
Maybe its unusable, maybe not. It's at least something
http://www.mediafire.com/file/y3um2am3cwo/HTC_CIME_buggy.zip
Click to expand...
Click to collapse
This is HTC_CIME made for HERO 2.0.1. Hope it can helps you.
ericchik said:
This is HTC_CIME made for HERO 2.0.1. Hope it can helps you.
Click to expand...
Click to collapse
This has been tried already and cannot use on N1
anybody can work on this please??
Hope there will be a mod for N1
jonasl said:
I hacked one together really quickly but it seems seriously buggy. You could give it a try if you want tho.
What's not working at all is the English (QWERTY) input. It doesn't draw itself correctly. I have no idea on how to fix that. Switching to Chinese input seems to work. I looked up a Chinese sign and entered it successfully. I have no idea what I wrote since I don't understand the language...
Maybe its unusable, maybe not. It's at least something
http://www.mediafire.com/file/y3um2am3cwo/HTC_CIME_buggy.zip
Click to expand...
Click to collapse
thanks man, works fine. apart from the following problems:
1)When switching to landscape mode the IME crashes.
2)The list of alternative/(possible)following characters is a bit misplaced so you can not see them all or click the arrow to show more (happens when using kbd/phonepad too)
when using the qwerty kbd or phonepad:
3)sometimes the key turns black afterit was pressed, sometimes the whole input area turns black, even tho the keyboard is still there and accepts new input.
4)ZhuYin/CangJie/PinYin/Stroke input do not work at all.
maybe you can tell us what exactly you did so far, so other people can fix the remaining issues ?
i think top prio should be issue 1) and 2)
apart from that the handwriting works quite well
I found one here that claims to be HTC_CIME.apk rip from a Dragon rom. But I get FC when I try to run it. Maybe one of the Devs can help?
http://alldroid.org/download/file.php?id=1051
from this page: http://alldroid.org/threads/14373-What-s-next/page3
I've been scouring everywhere (both english and chinese sites) and can not seem to find anybody who has made this hi-res HTC_CIME available
dtwrain said:
I found one here that claims to be HTC_CIME.apk rip from a Dragon rom. But I get FC when I try to run it. Maybe one of the Devs can help?
http://alldroid.org/download/file.php?id=1051
from this page: http://alldroid.org/threads/14373-What-s-next/page3
I've been scouring everywhere (both english and chinese sites) and can not seem to find anybody who has made this hi-res HTC_CIME available
Click to expand...
Click to collapse
seems we need the HTC framework to get this working.. anyway to port the htc framework on Desire to Nexus One?
another hdpi HTC_CIME
i found this on google, tweeted by @maxisma on Twitter.
still can't get it working, seems it has memory allocation problem in the dalvik vm?
I've noticed the new Modaco ROM by paulobrien has incorporated the new HTC_CIME for Chinese input. Anyone knows where we can get standalone version of the HTC_CIME for other ROMs? Thanks.
Hi guys, I have a TP2. I have a quick question. I'm pretty sure before I did the update to the 6.5 the accelerometer would work when i put the phone on landscape with out taking out the keyboard. Also wasn't there an option on 6.1 that let you set it to auto? it no where to be found. is there a fix for this? please help/advise thanks
I think g-sensor list can fix this. List of links here:
http://forum.xda-developers.com/showthread.php?t=430541
Thanks dude
That didn't really help to much there isn't anything in there about the problem i'm having...sux...
this one doesn't do it?
http://forum.xda-developers.com/showthread.php?t=487991
this should also work:
http://forum.xda-developers.com/showthread.php?t=403939
lol i was looking at that one now, do you think it would work with the new 6.5 update?
i tried the first one, i it work. like it should but i just noticed that is doesn't work with the new touch FLO. (looking into the 2nd link now)
It should, hard to say because i'm not sure which registry files it changes.
If not I attached the old file I used to get it working (mind you this changes so it always switches to landscape I believe). Back up your registry before you load the attached file because I haven't tested it with multiple ROMs.
I got Gyrator to work! problem solved thanks