I have a unlocked treo 750 that was branded to telstra I think cause that is what comes up on the phone. When I take the phone fuction off of flight mode to use the phone the telstra screen appears then turns the phone on and the same thing happens when I put it on flight mode the telstra screen comes up then turns the phone function off. How do I get rid of the telstra screen that comes up.
Just replace two BMP files in your Windows folder:
RadioGoodbye.bmp
and
RadioWelcome.bmp
anyone have any .bmp custom or like t-mobile?
thanks
ya i replaced the two .bmp's it didnt work
still boots up with at&t picture when i turn phone off and on
Related
i flashed NBD 8.2 and it wont get past the wM6 screen and its freezes aometimes it doesnt go on i took the battery out and was wondering what i can do?
hold down the "wifi/connection" hardware button and "voice record" hardware button and press/depress the soft reset button while still holding the hardware buttons then follow the on-screen prompt to restore your device.. if it doesn't work the first time try it one more time...
ok it send to restore then it went black screen on my again
Boot into the bootloader screen, connect to your PC, and flash a carrier ROM.
come on where can i find a carrier rom?
and it wont go i cant connect
Help!!!!please
Your carrier rom is the rom that came supplied with your device. Typically its whatever brand is on your device eg Dopod, K-JAM, HTC, T-mobile etc. The latest carrier rom for your device is usually available on the respective websites.
You havent mentioned if you have a G3/G4 ipl/spl etc. The best advice I can give based on the your post is as everyone else has already told you, put the phone in bootloader then flash your carriers rom.
good luck
yea i would do that but my phone doesnt go on completely
Take battery out. put battery back in. hold camera button, turn on phone. should take you into a screen with 3 colors on it.Thats called boot loader mode. Then connect via usb. flash either tmobile 2.26 or cingular 2.25. Cingular rom is available at htc.com. then you can go through the unlock process again. Then flash another rom again.
thank will do it tonight and do the unlock process tommorrow
i tried and got to bootloader screen and then it just did what it did before dims backlight and likke shuts off wtf is worng?
Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!
guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.
Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??
go search for remotecalibration.exe
Hi
Getting a little confused here, right theres a couple of things that are really bugging me, one of them is the very first screen when turned on is a orange screen (the phone is unlocked and has a o2 sim in it) I would like to have this screen either in line with o2 or different. There is also one of these screens just at the end when the phone is turned off.
Now Im assuming that these screens have to be flashed, I herd the screens refered to as splash, start up, and a few other terms. Are these the splash screens or do these come later, and will flashing get rid of these screens ?
I've never flashed on this phone before, but have done on lots of other devices.
TIA
JamJarPot
The splash screen shown on boot is flashed to the device, some ROMs here come with a splash some don't - in this case the splash that is present on your device will remain after flashing an OS only update. You can create your own splashes or extract them from other ROM packages - all the information to do this is on the forum (don't have time to give exact links, but it's there if you search).
The splash shown when the device is turned off is usually found in the \Windows folder on the device itself. On the Orange phones it's called Orange_shutdown.bmp and Orange_shutdown_L.bmp (for the landscape image).
Splash Screen flash how to: http://forum.xda-developers.com/showthread.php?t=334907
1. Splash Screen.
2. Animation (You can disable this in register.)
3. Windows Mobile splash (You can edit this in Windows/welcomehead89.png (orsomething like that).
Hello there,
I have recently received an HTC HD2 from a friend of a friend of mine. It didn't work and was stuck at a black screen.
After receiving the HD2 I saw that the HD2 was in a boot loop of some sort. Every time I would turn it on it would vibrate once, and then turn off. Then it would vibrate once again and it turned off again. The backlighting of the screen would turn on, and then after a certain period of time (maybe like 5 seconds) they turn off again.
Somehow (by luck, maybe) I managed to boot the phone into windows mobile 6.5. I still got a black screen, but I could hear the sound that the phone makes after it boots windows. I then attached the phone to the computer and downloaded the latest HTC HD2 Windows 6.5 ROM and flashed it to the phone as standard procedure. Now, every time I turn the phone on I hear the sounds of windows booting up and I can connect with it using windows mobile device center. I also hear sounds when I push the buttons on the phone.
TL;DR-> Black screen, phone reacts to input.
Question: will replacing the screen fix the phone? Or is it some other component failing. Booting windows proves the phone isn't bricked, right?
Thanks in advance.
Might Help
ikheetkoen said:
Hello there,
I have recently received an HTC HD2 from a friend of a friend of mine. It didn't work and was stuck at a black screen.
After receiving the HD2 I saw that the HD2 was in a boot loop of some sort. Every time I would turn it on it would vibrate once, and then turn off. Then it would vibrate once again and it turned off again. The backlighting of the screen would turn on, and then after a certain period of time (maybe like 5 seconds) they turn off again.
Somehow (by luck, maybe) I managed to boot the phone into windows mobile 6.5. I still got a black screen, but I could hear the sound that the phone makes after it boots windows. I then attached the phone to the computer and downloaded the latest HTC HD2 Windows 6.5 ROM and flashed it to the phone as standard procedure. Now, every time I turn the phone on I hear the sounds of windows booting up and I can connect with it using windows mobile device center. I also hear sounds when I push the buttons on the phone.
TL;DR-> Black screen, phone reacts to input.
Question: will replacing the screen fix the phone? Or is it some other component failing. Booting windows proves the phone isn't bricked, right?
Thanks in advance.
Click to expand...
Click to collapse
Hi, you can always try to boot into three colored screen, by turning the phone on while holding the DownVol key at the same time. If this doesn't work you would need to buy a new screen to see if that fixes the problem.
Heres a link to amazon where you can buy a new LCD, you can also search how to change the screen on Youtube
http://www.amazon.com/HTC-HD2-DIGITIZER-COMPLETE-ASSEMBLY/sim/B003QSDSM0/2
Hello All,
Basically what happened is this:
I got phone D6603 with "Vodafone protect" lock on and owner gave me a possible code for phone. I replaced screen and then found that lock requires only numeric pin, not what I was given. So, he then reset pin and deactivated lock, but I still had it on no matter what. So, I tried to flash new firmware into it for same phone and got it done, but now phone screen stays black all the time with only backlight on. Phone seemingly loads something (probably the new phone welcome screen after flash), which I cannot see, but when connected to computer from fastboot or something then all system files are visible.
When I boot phone from off position, it boots to a point where I can use side button to switch on and off the screen but touch does not respond because nowhere it reacts to touch or maybe I do not know where and what to click on screen.
What could be the likely solution? I do not think that phone is bricked, but something is wrong with system as it does not light up the screen properly. I tired flashing 2 times successfully with same result.
Any advice would e appreciated.
Hi, can this thread be deleted because I am getting phone swapped and thread no longer relevant? Thanks.