Soft D-Pad? - General Topics

I am trying to find an app or tool that gives a soft dpad, sort of like they keyboard. Or maybe just a way to have the keyboard open in apps that dont call for it? Anyone have any ideas? google has yielded me nada.

I am looking for a soft D-pad as well, which it would be very helpful in many applications and it would avoid the use of a regular soft keyboard that covers 40% the screen.
Thank you in advanced for any help on this!

Related

Send/End Buttons Broke

My send and end buttons have some how gotten screwed up. When I hit the send button, it opens contacts, calendar and the phone app. When I hit end it opens the contacts app and this obviously is creating problems. can not remap the button correctly through the button mapping control panel item either. It seems my D-pad has gone to hell as well.
I have hard reset the device and this is still a problem. Does anyone know what I can do to fix this? Any help that you could provide would be much appreciated.
Thanks,
db
Help! I'm having the same problem, a hard reset doesn't fix it.
I'm sorry, unfortunately I never figured out how to deal with this and my D-pad died so I got a new PPC. Best of luck to you though.
Not a solution, but as an interim, you can use my prog VJKeyPress to emulate the send and end keys.
Sounds like a hardware problem. The old ipaqs used to use resistor arrays to detect which keys were being pressed. Sounds like a screw up in similar hardware perhaps? Warranty time me'thinks.
V

open the sip menu easily

All the new Roms for many of the phones here are streamlined for one handed use. Though there is one problem. One cannot change the sip mode unless she clicks on the tiny arrow next to the keyboard icon. This is really difficult with the size of my thumb, and taking into consideration the slugginess of my prophet's processor, the menu takes a second or two to open, during which I impatiently and accidentally press one or both the soft buttons
I tried a lot to find a macro recorder, or a way to assign a hard button to that little arrow but nothing. Does anybody know a way to change sip's easily?
Try Wisbar Advance. There's a feature that enable the autochanging of sip base on what program you are running. You won't even need to change sip forever if it's properly configured.
unluckily I just have different sip's for greek and english, so I would like to change on the fly, maybe several times during a message. So that does not seem very helpful, although I will sure give it a try. Thanx.

HELP!! a bricking - how can I hard reset?

I know it is my fault, I was using the Advanced Configuration Tool and thought I could make the screen on the x7510 more sensitive. The result was the opposite and the screen now won't respond to taps at all. So no possibility of screen input.
Without that, I can't use the same tool to put the settings back to what they were before, as it requires a screen tap to commit changes before re-booting. The absence of soft keys on the keyboard makes for problems here.
For the same reason, I can't hard reset using the Clear Storage tool, as that also requires a screen tap. I can't use Resco Registry Editor as that requires screen taps too.
So I am in somewhat of a quandary, happy to hard reset and start again, but no way of doing it that I can see.
Could I re-load the ROM? Someone uploaded the WWE version, but it unzips to three .raw files, which I have no idea what to do with.
Help please!! I need this as I am on holiday, I may be slow coming back to any replies, we are in Laos, where comms are, shall we say, a little slow, and we are travelling about. the first chance i get to sort this out I will use though.
Thanks for any help anyone can give.
rjstep3
If you have access to a PC onto which you may install software, then you can download and install MyMobiler, which is freeware. Get it here: www.mymobiler.com.
This will allow you to control your device from the PC, using the mouse, so you'd be able to make the changes you need to make.
Good luck!
rjstep3 said:
I know it is my fault, I was using the Advanced Configuration Tool and thought I could make the screen on the x7510 more sensitive. The result was the opposite and the screen now won't respond to taps at all. So no possibility of screen input.
Without that, I can't use the same tool to put the settings back to what they were before, as it requires a screen tap to commit changes before re-booting. The absence of soft keys on the keyboard makes for problems here.
For the same reason, I can't hard reset using the Clear Storage tool, as that also requires a screen tap. I can't use Resco Registry Editor as that requires screen taps too.
So I am in somewhat of a quandary, happy to hard reset and start again, but no way of doing it that I can see.
Could I re-load the ROM? Someone uploaded the WWE version, but it unzips to three .raw files, which I have no idea what to do with.
Help please!! I need this as I am on holiday, I may be slow coming back to any replies, we are in Laos, where comms are, shall we say, a little slow, and we are travelling about. the first chance i get to sort this out I will use though.
Thanks for any help anyone can give.
rjstep3
Click to expand...
Click to collapse
hi
To make a Hardreset hold the volume slider down and press the reset button.
see wiki
http://wiki.xda-developers.com/index.php?pagename=Athena_Resets
but keep it in your mind that all your data (in rom) will be lose after hardreset
saied
thanks guys, just back from the Far East, appreciated your help and everything now restored.
rjstep3
For reference, I had this same problem yesterday. Didn't know of this thread at the time but managed to sort it out. It is completely possible to use the "clear storage" option in Settings>>System navigating using the keyboard. Fn>>OK brings up the start menu..navigate to settings using the cursor keys..press enter to select. Use TAB and cursor keys to navigate around across the tabs to "System" and again from there to "Clear Storage". Select whether to wipe the data stored on the device, on the flash disk or both using cursors/TAB, type "1234" and press the "OK" key. Done.
I had even managed to configure hardware buttons to the left/right soft keys to try to revert the settings in Advance Config, but it seems the effect of completely losing touch screen functionality is irreversible
Or you could obviously use the other method above which I didn't think to look for!! Like I said, just for reference. Might be useful to someone.
TIP: Don't change "Pressure Threshold" in Advanced Config to "Very High" as it will cause your touch screen to stop responding and the only way to get it back is by a hard reset.

Request Help - SIP Question

Hi,
I am just new to this pocket PC phone (just the old HTC Touch) and i tried out installing an IP Phone Keyboard program. When I wasnt happy about it, i uninstalled it but it messed up my SIP. The default standard input keyboard now is cut at the bottom (meaning i dont see the entire last row of Ctrl, space bar, etc.) but there's a black row appearing at the top of the input keyboard. It looks like the input keyboard was dragged down. Worse, the suggested words now appear at the bottom of the screen (where your normal Send or Cancel buttons are).
I really would appreciate your advise and help in getting this resolved. Dont know where to run to or whom to raise this to.
Thank you and looking forward to your response.
ailene said:
Hi,
I am just new to this pocket PC phone (just the old HTC Touch) and i tried out installing an IP Phone Keyboard program. When I wasnt happy about it, i uninstalled it but it messed up my SIP. The default standard input keyboard now is cut at the bottom (meaning i dont see the entire last row of Ctrl, space bar, etc.) but there's a black row appearing at the top of the input keyboard. It looks like the input keyboard was dragged down. Worse, the suggested words now appear at the bottom of the screen (where your normal Send or Cancel buttons are).
I really would appreciate your advise and help in getting this resolved. Dont know where to run to or whom to raise this to.
Thank you and looking forward to your response.
Click to expand...
Click to collapse
Restart your PPC. After that go to settings--> input---> select default input keyboard and try.
Hope it will help.
Are you using the default keyboard?
You can install any other SIP and it should work fine even if the default keyboard's having problems.
You can also hard reset incase you don't manage anything else.
I'm not aware of a bug concerning the default keyboard showing wrong except for something which goes away after a soft reset.
Thanks very much for your responses. Unfortunately, I did all that (set keyboard as default, try installing another keyboard software, soft reset and hard reset) but the problem still persists. I am almost in the vicinity of regretting why i had this PPC.
can you specify exactly which app caused this problem?

[Q] On-Screen Replacement for home/back/menu/search keys?

Hi All.
Just got my DX last week. I am liking the DX, except for the bootloader issue and the back/home/menu/search "hard" keys. I really miss the "soft" keys on the D1. These feel a little awkward and I also worry that they will wear out or break over time.
I installed an app called "softkeys" that gives me a floating bar with on-screen back/home/menu/search buttons and I am pretty happy with that. I have also seen the soft key application that places the keys on the side of the screen and lets them slide in or out.
But I would love to find one that shifts the screen up to allow soft back/home/menu/search to always remain on the bottom of the screen and out of the way?
Is it possible? Anyone know of such an app?
Thanks,
Rob
This may or may not work for you. Use this at you own risk.
http://forum.xda-developers.com/showthread.php?t=850464

Categories

Resources