Database Info

Iphone Theme (ppc)

EVERYONE ONE I HAVE IT I FINALY DID IT AFTER TRYING ALL DAY TO DO IT I HAVE IT AND THIS IS HOW IT YOU CAN SEE PICTURES OF MY IPHONE http://flickr.com/photos/okilic/sets/72157594484670553/
AND THESE ARE THE ZIPS FOR THE IPHONE
http://rapidshare.com/files/12979745/osx_wa.rar.html
http://rapidshare.com/files/12979949/osx_wad.rar.html
AND THIS IS THE ZIP FOR THE DIALPAD
http://rapidshare.com/files/12980142/Dialpad_iPhone.rar.htm
TO INSTALL IT:
download the rar files, and extract them into your desktop
for wisbar advance desktop:
copy osx_WAD folder to into your pda in Themes/desktop/ folder
(root/Themes/Desktop/osx_wad/)
and click theme settings icon in the settings panel or the load wisbar advance and click desktop, select theme manager and select the osx_wad theme
for wisbar advance:
copy osx_WA folder into stroge card or the ramdisk folder.. click wisbar advance settings in the programs/wisbar advance/wisbar advance settings… select custom theme, press customize and press import theme button.. select the osx_wa.skin file which you copied to where did you want and press ok… it’s done!
for dialpad skin:
copy the cab file into your pda phone and run in file explorer.. select the root directory to install.. and reset the phone
YOU ARE DONE HOPE YOU LIKE IT!!!

i already installed it for my wisbar in my dopod838 pro.... its pretty neat but the dialer was givin alot of problems to me like no contact list etc etc.... so i have unistalled it...

what you could do is keep everything else and just not install the dialpad that is why i have the dial pad and the other zips seperate so you have a choice that is what i would suggest

I Have Found Vista Skin (for Ppc)
CLICK THIS LINK FOR VISTA PORTABLE EDITION (vga)
http://www.aximsite.com/boards/showthread.php?t=127129
NOTE: go past the pictures on the site i have given you you will come across a section that says download under there you will find the links

wow nice skin. Ca you pls create a VGA version of Dialpad skin?

um i am not shore about a vga version i realy haven't tried i'll see what i can do

maybe im retarded today. i was able to load the wisbar with the cingular on top. but i dont see the theme destop folder on my wizard. i have claunch though should i use that as an alternative? or could guide me through something im missing.

That Happend To Me Once Have You Tried To Load It Again?

need to have the dialer look the same in landscape.. plz fix it

don't know what you are talking about

A few reasons why you cannot see the desktop:
What is in the folder osx_wa it should be two other folder and files, if you have another folder named osx_wa you have messed up the unzip/ extract files (I did this on my first attempt so its easy done).
Do you actually get to select osx_wa when setting the custom desktop in wisebar advance desktop? - if not try this - go to start/ settings/ today and select the today screen to Windows Default - now see if you can see the osx_wa file in WA Desktop.
Try selecting the file again and for some reason it will appear - looks like others have experianced this as well, I found it frustrating at times to say the least - but its worth it in the end. It works well on the Wizard - Mike

just did that and i was able to change my theme. but i only see the three themes that came with my device. where is the theme folder located on the 8125.

Have you installed WiseBar Advance 2 AND WiseBar Advance 2 DeskTop Plugin to the device? - the Desktop plugin creates the theme folder to put the osx_wad folder in to - Mike

got it thanks dude. now i just gotta get the hang of the icons

how do u load the icons. i was able to get the clownfish as my wallpaper and i was able to get the slidelock dock but no slidelock arrow.

PETER RED said:
EVERYONE ONE I HAVE IT I FINALY DID IT AFTER TRYING ALL DAY TO DO IT I HAVE IT AND THIS IS HOW IT YOU CAN SEE PICTURES OF MY IPHONE http://flickr.com/photos/okilic/sets/72157594484670553/
AND THESE ARE THE ZIPS FOR THE IPHONE
http://rapidshare.com/files/12979745/osx_wa.rar.html
http://rapidshare.com/files/12979949/osx_wad.rar.html
AND THIS IS THE ZIP FOR THE DIALPAD
http://rapidshare.com/files/12980142/Dialpad_iPhone.rar.htm
TO INSTALL IT:
download the rar files, and extract them into your desktop
for wisbar advance desktop:
copy osx_WAD folder to into your pda in Themes/desktop/ folder
(root/Themes/Desktop/osx_wad/)
and click theme settings icon in the settings panel or the load wisbar advance and click desktop, select theme manager and select the osx_wad theme
for wisbar advance:
copy osx_WA folder into stroge card or the ramdisk folder.. click wisbar advance settings in the programs/wisbar advance/wisbar advance settings… select custom theme, press customize and press import theme button.. select the osx_wa.skin file which you copied to where did you want and press ok… it’s done!
for dialpad skin:
copy the cab file into your pda phone and run in file explorer.. select the root directory to install.. and reset the phone
YOU ARE DONE HOPE YOU LIKE IT!!!
Click to expand...
Click to collapse
why do you use exactly my words? this is my theme, and these are my words... ????
http://forum.xda-developers.com/showthread.php?t=291120&highlight=iphone
http://www.ozankilic.com/?p=4
this is not your theme, please stop your thread!

you are a liar

PETER RED said:
you are a liar
Click to expand...
Click to collapse
are you crazy? you've stolen my words, take a look the dates of topics.. who's posted first ..
and how can you say the flickr page is yours?
you such a looser

are mate i think you are crazy i created this thread not from your words my words i thought them up and don't call me a loser or i will report you

got i workin now.
hey flay, is there is a way to show acurate signal strength. my bluetooth doesnt alert me that i lost signal

Help deleting file

I cant figure out how to delete MrIncredibles dialer. I was able to delete the cab, but cant delete the rest
Also, I cant delete everything from QuickMenu, when I push my Start button, it tells me that QuickMenu cant be launced(because I have deleted some of the files, jsut cant find the rest)

OK Two things...
One: If it was cooked into the ROM it usually cannot be uninstalled well.
Two: Start -> Settings -> System -> Remove Programs. Find it on the List and Click Remove.

Thanks for the response!!
I'm not using a cooked rom, I did remove the dialer from "remove programs". I dont know why I didnt do that already .
As for QuickMenu, it isnt in "remove programs" anymore, because I removed it from there a day or 2 earlier. It still left something behind though, becuase it is preventing me from using my original Windows Start menu.

I copied "naviPanel.exe" from Windows folder to Start Menu/Programs folder.
\Now, i want to delete this copied .exe file from the start menu folder.
Can anyone help me out?
Thanks
Hari
HTC-HD2

SASHIMI and new 6.5.x roms

Hi everybody? I am trying to find a solution to a issue with sasimi on the new 6.5.X roms (with the start button on the lower bar). The issue is that sashimi cant install cabs to storage card. I searched the web and foud some ideas that u need to hack the sashimi.mrsc file but none of them was working.
Can anybody who succeeded in runing sashimi post his workoround? That would really help me. Thanks ion advance.

Nobody here uses sashimi?

Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X

Man, I love you, thanks.

secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)

dagrim1 said:
Will it also still work with older winmo versions? Or does this break that functionality... thanks though! (Thinking of it, only using 6.5.x now anyway...)
Click to expand...
Click to collapse
no it will not working with 6.5, first backup SASHIMI.mscr original first for using later with 6.5

secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.

steveianson said:
Faaaaaaaaaantastic, it works.
Now, is there a way to install cabs to the device as well. I have tried "device" and nothing for the ASL directory, but nothing installs.
I have the Autoinstall facility on my rom but am a bit dubious to have have Autoinstall and Sashimi both working after a re-rom.
Click to expand...
Click to collapse
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO

secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I'm so glad that it works again...

secoseco said:
Hello
unpack attached and replace the file in \\SASHIMI\Program\Bin\SASHIMI.mscr
and it will work with Win 6.5.X
Click to expand...
Click to collapse
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2

Me too
It seems that the "SendSpecial ("Down")" is not working and the script may be hanging on the command, or something like that. You don't see the selection change, so it could also be the "SendSpecial("Space")" not working. Either way, the "SendSpecial("LeftSoft")" just after is obviously not firing. Not sure why it's different now, but it apparently is. There used to be a "SendSpecial("CR")" instead of the "SendSpecial("Space")", so I'll try that to see if it's working again (worked in win6.1, not in win6.5). Mine's been working just fine, up till the very latest Energy ROM on my CDMA TP2.

LightC said:
I just replaced my SASHIMI.mcsr and it does fix files installed to the device memory but for cabs installed to the storage card, I have to still select storage card and hit 'OK'. Then I have to go to the Home menu and come back to SASHIMI before SASHIMI will carry on with the next cab (in which then I have to repeat the steps for all cabs to be installed to the SC).
Anyone know what could be wrong?
I'm running: Energy.RHODCDMA.23549.Sense2.5_with_Cookie_HomeTab.Mar.20.7z
on a TP2
Click to expand...
Click to collapse
I think it connected to the roms u are using. For me it worked with one rom, then I flashed other rom and I experencied the same thing as you.

sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
secoseco said:
you need to install Sashimi program once in you device to storage card
1- if you already install Sashimi.cab you will get SASHIMI folder in storage card
2- copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\
3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
3-copy reg files that you want to install in SASHIMI\Auto\REG\
and so on
after you upgrade your Leo or hardreset it, run Autorun.exe from SASHIMI\Program\2577\
and chose AUTO
Click to expand...
Click to collapse

dingolino said:
sorry to ask, but so far I have no clue about Sashimi but would like to use it and read therefore as much as I could.
Is point 3 a typo?
>3-copy cab's programs that you want to install in main memory to SASHIMI\Auto\cab\SC\
shouldn´t it be:
3-copy cab's programs that you want to install in Storage Card to SASHIMI\Auto\cab\SC\
Sorry to ask maybe the obvious but for a newbie it is helping to sort out missunderstanding.
Best regards,
dingolino
Click to expand...
Click to collapse
You're right there off course

I am having no luck with the v8.0 of Sashimi. I have the Artemis ROM (WinMo v. 6.5.5).
Auto mode only installs cabs from cab/ASL folder. I replaced the Sashimi.mscr with the one posted in this thread but to no avail.
Do you guys have any suggestions?

me too,
sashimi doesnt install (not works) for new artemis v7. It install all my cabs from auto/SC to device becasue it can not move cursore down anymore..
any suggestions?

I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.

I'm surprised that either of the attachments on this thread works on HD2 Leo. I found that there is a very basic problem with mortscript and all sashimi scripts will hang. Two symptoms:
1) if not in flight mode, sometimes hangs during initialisation
2) if auto install to storage card, will hang (leaving you to select the radio button and press install)
and there is no easy cure.

padlad said:
I also had a problem with cabs not auto installing onto my Storage Card, instead they were installing to My Device. I have been doing some hunting around for the solution and i think i have managed to find it. (its worked for me anyway).
Go to SASHIMI > Program > Bin, BACKUP SASHIMI.mscr and then replace with the one i have attached. I am no coder so please don't ask me about specifics, there were just some hashes added to the beginning of a couple of lines of code. Like i say it worked for me, so hopefully it will work for you Let us know if it works for you. Cheers.
Click to expand...
Click to collapse
thx m8,
i will try it

i'm on wm 6.5.x and sashimi stalls at SASHIMI INITIALIZATION COMPLETE.... HEEEEELP!

Manila Today Page (MTP) v0.4.0.0 for HD2

EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative

Screenshots plzzz........

mughal90 said:
Screenshots plzzz........
Click to expand...
Click to collapse
Clicking the MTP link in the first post will give an idea of how it looks.

brooon said:
EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative
Click to expand...
Click to collapse
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration. Are these belong to the original Manila files, or came abt when install MTP?
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order). Delete which xml & reg key, the two in step 3&4?

Sian said:
1. Are these belong to the original Manila files, or came abt when install MTP?
2. Delete which xml & reg key, the two in step 3&4?
Click to expand...
Click to collapse
1. This folder seems to represent the arrangement of the slidericons in manila (default: 12 icons --> 12 subfolders in this folder)...i hope this answered your question.
2. Right! RegKey = Point 4, xml = Point 3

brooon said:
1. This folder seems to represent the arrangement of the slidericons in manila (default: 12 icons --> 12 subfolders in this folder)...i hope this answered your question.
2. Right! RegKey = Point 4, xml = Point 3
Click to expand...
Click to collapse
Would the deleted ManilaFull.xml be restored automatically should we uninstall MTP?
Basically, I don't want to screw up the original Manila after installing/uninstalling MTP. MTP is uninstallable, ya?

I havn´t screwed up anything after deinstalling MTP...just delete the manilafull and the configurationkey again and...finish!

Thanks for the clarification.

brooon said:
EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative
Click to expand...
Click to collapse
You might want to give credit to the person who ACTUALLY found the solution and you just read and copied what they explained.
http://forum.xda-developers.com/showpost.php?p=5173200&postcount=865

Yep ...
Nagrom Nniuq said:
You might want to give credit to the person who ACTUALLY found the solution and you just read and copied what they explained.
http://forum.xda-developers.com/showpost.php?p=5173200&postcount=865
Click to expand...
Click to collapse
"Full idea not my. I was find it on 4pda.ru" - this is from the original tread.

Nagrom Nniuq said:
You might want to give credit to the person who ACTUALLY found the solution and you just read and copied what they explained.
http://forum.xda-developers.com/showpost.php?p=5173200&postcount=865
Click to expand...
Click to collapse
i do understand your comment Nagrom Nniuq That´s why I´ve written "once again, for every HD2 user". I didn´t want to bask in s.o. glory here, as you can see, I have edited my first post, because once there was the question how to bring the MTP Icon into the manila settings to reconfigure the position of it. I deleted the question as soon as I found the solution paryav gave in the post you´ve linked above.
Sorry if this has lead to some bad thoughts. Just wanted to share the solution
PS: I only added the Cabfile for the apple-icon and corrected the manual within this point

brooon said:
1. Install MTP
Click to expand...
Click to collapse
by point 1 You mean install cab from Your post or all points described on MTP org page (follow link You gave) ?

brooon said:
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
Click to expand...
Click to collapse
can i somehow choose mine icon to be showed on tab ?

can you put screen shot?

What kind of things can we put into tabs? Someone put WeatherRadar in HERE and it looks good...what other options do we have?

AUTO Installation CAB for Today Page
Look at this post and give a try . And post your feedbacks at that thread
UPDATED: Manila 2.5 Auto Installation CAB for TODAY SCREEN

Help ried to delete the ManilaFull.xml file but its a rom file. It will not let me delete it.
I've turned off sense and tryed totalCom & Resco Exp but the file is read only. How do i get rid of it.
Many Thx

brooon said:
EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative
Click to expand...
Click to collapse
Hi,
Thank you for all these good work.
I installed your Manila TV tab with no problem.
the MTP with the above steps for me is installing and the tab is in my manila but everytime I reboote, it give me and error which my manila is not supported, unable to patch.
also my windows have a start button at the bottom and when I add plugins in MTP configuration, I don't have the OK button to save it in the config.
I have the same issue with your MTP v 5 .
My Rom is : Cap's special 6.5 with sense 2.5
OS version : 5.2.28011
Manila : 2.5.19211619.0.cfc
Rom version : 5.12.28011 WWE
Radio : 1.17.25.09

nobody wants to put screen shot?

Can anyone guide me through the uninstallation?

Possible to remove "Start" icon and text?

Apologies if this has been asked and answered elsewhere, I searched but couldn't find it: Is it possible to remove or at least hide the "Start" icon and text from the upper left corner of the screen on a stock TMOUSA HD2? Seems unnecessary to have it there when we have a hard button for the same thing.

At least in WM6.1 I edited "shellres.dll.041D.mui", 041D is the code for Sweden so you have to figure out what code is your country.

it's very easy to remove the start icon in 6.5.x versions..
don't know whether this works in 6.5
(6.5.x is the one with the big bottom bar and start on bottom left)
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\BubbleTiles]
"HardwareDoneKeyEnabled"=dword:00000000
"HardwareStartKeyEnabled"=dword:00000001
"TextModeEnabled"=dword:00000001
"Enabled"=dword:00000001
if you don't like the X then change the "DoneKey" to 1 as well.

for wm6.5: http://forum.xda-developers.com/showthread.php?t=580568
download and open .zip, extract and install the cab "no_start". it will remove the text only. that's it

Thanks so much guys. I'll have to give these ideas a try. anyone else have any ideas?

alexleon said:
for wm6.5: http://forum.xda-developers.com/showthread.php?t=580568
download and open .zip, extract and install the cab "no_start". it will remove the text only. that's it
Click to expand...
Click to collapse
I'm interested in this as well, but it didn't work out for me.... I installed SDKCERTS.cab, so that's not the problem.. :s

alexleon said:
for wm6.5: http://forum.xda-developers.com/showthread.php?t=580568
download and open .zip, extract and install the cab "no_start". it will remove the text only. that's it
Click to expand...
Click to collapse
The no start cab in dafunk's thread worked perfectly. Thanks for this. (This removes the test not the icon.)

has anybody given the reg edits a try on 6.5.0?
I to think its pointless having the start icon in the top left when there is a perfectly placed hardware button

.cab for changing the start text without flashing or removing
is there a .cab for changing the start text without flashing or removing it all together..

Sorry but i've installed sdkcert and no text, and nothing happened after on softreset.
Someone can help me ?
Under french orange stock rom 1.43