My camera suddenly stopped working, I took pictures yesterday as usual but this morning when I tried to take some, well the camera just doesn't want to launch itself..
I tried to go back to official roms and such but it didn't change a thing, is there a solution please I don't wanna say goodbye to my qtek9100 camera function
Anyone please? I really need some help
yo, anyone alive please?
you haven't given much information. Does the camera app start with a black screen? Have you tried to start the app via the shortcut instead of the button. If the camera was bad i'd think the software would still run. Could your button be bad?
No nothing works, it's not even recognized by the pda anymore, I tried to launch it with any way possible, I tried to reflash but it's still not recognized. I also looked if the camera was ok (inside the pda, dunno how to say) but it was still in place, it suddenly stopped being recognized after flashing a rom radio
I didn't really get more answer lol
Anyone please?
if you have problems with camera after flshing original rom, then your hardware is broken.
Hi,
I have a very strange problem... I have a german MDA Vario IV (Raphael) and I recently flashed ROMEOS 1.12, then HTC StockROM and after a couple of days it first happened, that my camera viewfinder is completely black. The camera, however, works, i.e. it takes pictures which I can view in the album.
When I tap the screen in camera mode, I see the 3 symbols, but when I tap the preferences-wheel, nothing happens.
When Romeos 1.40 (German) came out, I flashed it - and I still have the problem. I don't quite understand it, as it worked first with the HTC Rom and after about 14days it stopped working.
Do you have any help?
I just had the same problem. Fixed by doing a hard reset...
did you flash a new radio?
I just registered to report this same issue.
I just picked up my fuze today, and was going through the steps in the noob guide before I decided to stop and just let the phone install the regular software so I could at least activate it before a new bill kicked in before the account got cancelled.
Right before I stopped going through the noob guide, I got as far as doing a soft reset right before the installing ATT bloatware and was removing some options in the guide and restarting. Then, since I just wanted to activate the phone (I had no SD card to safely try out all the steps in the noob guide, and wanted to wait for it), I did a hard reset.
After I activated my phone, I've been trying out my camera and it just shows a black screen. If I touch the screen the three buttons show up and clicking on the buttons don't do anything. Though, if I hold the enter key it clicks and takes a picture which shows up in my album.
I'm going to wait till my SD card comes in before I do another hard reset to do the install again. Hopefully the hard reset fixes the issue.
Still no one else with this issue? I have flashed NATF 4.5 as well as energy 2.0 . I have changed to two different radios and this problem has persisted. Everything works fine at first, but then within a couple of days it goes black. Everything is exactly as others have reported. Pictures take, the touch screen menus work ( selecting any setting ).... its just the viewfinder that is acting goofy. Soft resetting it will occasionally make it work again. It makes me feel as though some of us have some software somewhere that isnt acting as it should. I googled the issue to no avail.
Any gurus able to shed some light on this matter?
Currently running:
HardSpl 1.9
EnergyRom 2.0
Radio 1.02.25.32
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
KSS said:
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
Click to expand...
Click to collapse
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
pyraxiate said:
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
Click to expand...
Click to collapse
Of the programs you listed, Skyfire is the only one I am also running. I just completed my flash and turned the camera on prior to installing any apps, cabs, etc... and the viewfinder worked fine.
I am in the process of adding my customizations back on, doing a PIM restore, and installing cabs and will edit my post later to report whether it continues to function correctly.
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
KSS said:
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
Click to expand...
Click to collapse
This was an issue with RRE's roms a while back. Not sure what he did to fix it but I know he tweaked a flashed new versions about 100 times in one day! I would post the question in your respective rom's threads and see if the cooks have a better idea. I would bet that there is a file or setting common to all of the roms listed here that is causing the problem.
Im running the stock rom in a 1 1/2 month old Fuze
The Black screen happens to me, if too much sunlight gets thru on superfine settings. (i hold it facing directly into the sun) It seems to blow out the picture (goes all white) -then theres no display at all (black) unless i exit camera and restart.
Camera viewfinder is black
Hi,
there is a fix for this on the htc asia site, if you go to the support tab and look at the downloads for touchpro, I am not sure its for all phone as it asked for my serial number and told me it was not for my phone, on this site at least it seemed to be for hong kong, singapore & china, Perhaps check the htc site for your location.
Good Luck
A|C
I have got a new touch cruise (polaris) but when I tried to test the camera I noticed one vertical light blue stripe on the screen and also it stays on the photo. One or two days later there appeared three more vertical stripes and one horizontal violet stripe which also appear on the taken photos (see file attached). Those stripes only appears when turning on the main camera, those does not appears when using other features of the smartphone, nor when using the front camera nor when viewing the sample photos (cuz the taken photos are shown with these stripes).
I tried to find if there is any cover on the lens but there is no any one.
I installed the hot fox about blur when zooming but nothing changed.
I did a hard reset but the stripes did not disappear.
Unfortunately I can not use any guarantee for this phone.
My final option is to believe the rom (WM 6.0 spanish) was corrupted for the camera feature and that I could solve the problem reinstalling only the files for the camera (I do not want to reinstall the whole rom). Is that possible ??? Anybody can send me those files or tell me where can I find them ?? Any help ps
thks in advance
it's the same problem with me.. Anybody have a clue for this? The stripes is very annoying.. thanks...
anybody got the solution please?
Hello all,
I'm hoping someone an help with this.
I have already asked a few people, but no-one has been able to solve it just yet. I have faith though.
No matter which ROM I use (was using Vegan initially, then tried TnT Lite and even the stock TnT) when I try to use the camera it seems to "crash". The app loads, and I can interact with the app, but the camera screen seems to crash (colored lines for a split second, then nothing) then goes black. I can still change settings in the camera (such as change to video etc) but the camera screen is just black. When I click the shutter button to take picture, the picture appears at the top right in the little box but is just a green square.
Anyone any ideas?
Does it sound like a software issue? Or hardware?
I'm really hoping software as I don't want my tab to be broken.
I have not tried an nvflash yet, but probably going to do that tonight and fully reset it. Might that help?
Thanks in advance!
Mine was doing something like this. I found out with mine that when I opened the case, the camera had popped out of it's spot and wasn't pointing out the keyhole.
Hey guys.
I got a problem with my Mi4 with Lineage 13 (6.0.1).
I tried a couple of camera apps, but my rear camera doesn't work. The app starts for a short time including button for pics etc. but the display stays black (seems like someone had his thumb on the lense). Then I get a message "Can't connect to camera" and the app closes.
One thing, when I start a camera app, the lens make a sound like it would took a photo.
What do you guys think? Camera defect or problem with the custom rom? For notice, I had the same problem with Lineage 14 (7.1.1).
Thanks in advance.
software problem.
Try clean flashing again. Or shift to other ROMs