I do not know what to do. Every time I turn my device on it loads to the Smart Mobility screen, and then the Smart Mobility screen which shows my device information, but then stops. I can't get it past this stage no matter what I press.
I can get it into bootloader and I tried installing a new ROM (http://forum.xda-developers.com/showthread.php?t=436779) but the percentage bar does not go over 0%.
This is all because I tried installing TouchFLO 3D's first porting thing from PPCWarez...
Any ideas please? I really need help.
There must be a problem with your rom. Just reinstall either a Bepe rom or the official rom. That should help.
To reinstall a rom, load it via the SD card as active sync might not be available.
Well, I managed to get it working with help from scouse martin. I downloaded the official ROM off www.htc.com and managed to flash it successfully.
On a side note, my SD card is broken, so I currently don't have one. Good job Martin could help me!
(Ps. Anyone selling a 4/8GB MicroSD card, let me know)
Related
Everytime i boot my phone (Blackdiamond 1.0) i get a timewizard error, and it wont go away. I had blackdiamond 3.1 installed, and i couldn't put up with the missed calls and not being able to hang up. So i decided to go back to tmobile 2.6, and thats when i started getting the timewizard error. So then i decided to install blackdiamond 1.0 and now i can't even align the screen because the error comes up. Any ideas? possibly a rom that cleans everything out.
anyone know such a rom?
Sounds like a bad flash. Remove your storage card and reflash T-Mobile 2.26 ROM again.
I recommend this ROM
goofeyass said:
Sounds like a bad flash. Remove your storage card and reflash T-Mobile 2.26 ROM again.
Click to expand...
Click to collapse
This is my third flash after the error, still no solution. The phone is overwhelmed with errors such as the one mentioned above, the rest are ***.exe not being able to open errors. Any other idea's would be helpful, thanks!
Please guys, i know the answer is out there in one of you. Please help, i don't have any spare phones :-(
BD 1.0 is a little old
People use to install new ROMS so the problems are better handled
To clean your PDA - Install Tmobile 2.26 (search around here or ... hold on .... Get it here)
Than install any ROM you like I would advise to go with any TNT ROM. I've put this (I don't know any better http mirror)
Don't forget to Hard-Reset the wizard after each ROM update
PS:I've tried BD3.1 but i had almost the same issues as you.
Aldo
hey aldo, thanks for the post. I have installed tmobile 2.26 rom multiple times, it just gives me a bunch of .exe missing errors and my phone is really slow. I looked through the directories with file explorer and most of the files are still there, they have not deleted. Any ideas?
Thanks
a little update
the timewizard notification error went away after installing tmobile 2.26, but i still had a lot of ____.exe errors. I used the file explorer to the startup folder under windows and found a lot of broken shortcuts to programs. The tmobile 2.26 rom must have removed the programs, but it left behind a very slow phone and a bunch of broken short cuts. Any way to fix this?
Thanks
Hmmm....
It sounds to me you have not hard-reseted your wizard.
Try a hard reset with the TMO 2.26 ROM on it.
PS:
Hard reset sequence:
Press VoiceDial button + comms manager button + soft reset.
You will get a screen with 3 colored bars; at this screen, press the D-Pad UP.
(some other version will display a message saying to restore to factory default settings, press the 'Send' button. In this case, press your 'Send'/'Call' button).
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
Hey Guys,
First off this is a re-post, me old thread was closed, I am sorry for reopening but I am still having this issue. DaveShaw and smokestack76 had posted. Dave thank you for your reply but I have been through the noob flash guide and many many many other threads and it does not resolve my issue.
I'm not new to flashing and roms, I have flashed at least 100 times and have done some cooking. Had the random stuck in bootloader that wouldn't resolve itself today (using 3.29) Loaded kaisdiagsd.nbh and flashed stock att rom. (probably should have gone right for the spl patch but I was frustrated and needed my phone) Boot loader is now v3.65
Flashed fine, reboot, same issue. Phone will now only load the stock 6.1 att rom from the micro sd. kaisdiagsd.nbh is stuck on loading as for all other roms. I can occassionally get the os to load using mtty. From there tried jumpspl and it would not connect via usb at all.
I have tried flashing spl from the sd and yes spl image was KAISIMG.nbh and KAISDIAG.nbh was on there as well. Card is formatted fat32. HardSPL would start, read the file and get stuck on loading.
When in the stock 6.1 os I get the old unrecognized usb device in both xp and vista.
Is there anything else I can do to reflash spl? All i can think of is trying the task 2a, wiping everything and trying to flash from diag but I don't even want to try that route without something solid in place.
The phone is 2 years old, upgrading when the touch pro 2 hits att in aug sept or whenever it is released, but I need my phone.
I have gone through many many many posts. I'm stuck. Any help would be appreciated.
I have the stock 6.1 att rom up right now but I would like to resolve the issue.
__________________
finally finally got the patched version of 3.29 flashed. I will let you guys know how it goes from here. I am on a different computer at work.
Success!
I started from complete scratch and a fresh brain and was able to get everything going.
After I got the os back up i was able to start jumpspl and get it to connect via usb. Then only the force usb on 3.29 patch would work. After that repaired active sync and I was ready to go. Thanks smokestack79 for the late night help last night. I was out of it and frustrated. Seems like she's got a little more life in her after all.
Hey all,
I have tried searching frantically, but came up with nothing. Can someone explain how to restore the stock manila and boot screen files? I'm returning the phone tomorrow and want it looking pristine before handing it over. My start menu icon, manila slider and clock, and "SSK" 2nd boot screen won't go away after a clear storage and Stock Rom & Radio flash.
PLEASE HELP! What did I do wrong?! Did it not flash properly?!
Thanks for your assistance!
UPDATE: I think it may have been a flashing error, because it appears that certain software has been loaded on as well. Lets try flashing again from a different PC.
UPDATE 2: So I figured it out. It errored out because I was trying to flash using VMWare Fusion 3.0 and Windows 7 configuration on my MacBook Pro. Tried it in bootcamp, and it was flawless. Hopefully this helps the next guy out that this happens to.
You can also hard reset your phone after flashing a rom.
I previously loaded 3.29.xTep_3.00 with hardspl 3.05. It's been running fine, but I wanted to try some different ROMs so downloaded several. None will work. No other versions of hardspl either. no radio upgrades/downgrades either. Everything is fine until I get to the gray load screen with the % of progress. It gets to 1% then bails. PC returns "ERROR [270]: UPDATE ERROR The Image file is corrupted. Please check your update utility." I have tried on 3 different PCs, reformatted flash drive and internal storage, removed all cards.. not sure what else to do. Can't find directions anywhere for MicroSD flash for the x7510 or i'd try it. Only thing odd about my device, besides this, is that the GPS stopped connecting to satellites several months ago (another bummer). Any ideas?
I got this result when I just removed the minisd card and didn't remove the cardadapter. Once I had removed the adapter everything was fine but you have probably done this so... I don't know what to tell you. Second time I flashed I remembered the procedure wrongly and I kept putting the phone into bootloader mode before I flashed I ofcourse got the same lack of result then, once I flashed from windows not bootloader everything was fine.
Thanks teacher1960, I have made sure all cards/sleeves/sims etc are out. Not loading from boot-loader, etc. Sadly, just screwed I guess, when it comes to ROM experimenting. The ROM currently running is the best of all i've tried, so my heart is a-pining, but not destroyed. If anyone knows how to boot from an SD card (I have a 2 MB non-SDHC card that I used to flash my TYTN2 with) I would love to know the steps. Thanks again.
I would try to SPL back to stock-SPL and then start all over again.
As being explained here.
dumbquestion said:
I previously loaded 3.29.xTep_3.00 with hardspl 3.05. It's been running fine, but I wanted to try some different ROMs so downloaded several. None will work. No other versions of hardspl either. no radio upgrades/downgrades either. Everything is fine until I get to the gray load screen with the % of progress. It gets to 1% then bails. PC returns "ERROR [270]: UPDATE ERROR The Image file is corrupted. Please check your update utility." I have tried on 3 different PCs, reformatted flash drive and internal storage, removed all cards.. not sure what else to do. Can't find directions anywhere for MicroSD flash for the x7510 or i'd try it. Only thing odd about my device, besides this, is that the GPS stopped connecting to satellites several months ago (another bummer). Any ideas?
Click to expand...
Click to collapse
Greetings,
i have the x7510 for more than 2 years, may be since i joined xda-developers and since that time i have been trying to upgrade it from 6.1 to any given cooked room. i have tried your roms several times but each time it ends with error. every thing goes smooth till it reaches the tri-color where it shows spl 3.05.0000 then screen goes wight with 1% only then it reboots and on the desktop it gives the following message:
ERROR 270: UPDATE ERROR
the file is corrupted, please check the update file
i remeber i posted several times with no reply
would you please help me to solve this problem, please