Has anyone installed the Manilla 2D in HTC Wizard running a Windows Mobile 5?
I tried installing it in mine and after the restart, the HTC Home plugin vanished altogether and there was nothing else.
On checking the Today items, there was no Touch Flo listed nor the HTC home plugin I was using earlier was listed.
A quick check in the registry showed the entries for Touch Flo (and also for the vanished HTC home) present under the Today registry entries.
Does this thing work on WM5 at all?
Am I missing something?
NOTE: I also installed the shared dll cab file.
krsriraman said:
Has anyone installed the Manilla 2D in HTC Wizard running a Windows Mobile 5?
I tried installing it in mine and after the restart, the HTC Home plugin vanished altogether and there was nothing else.
On checking the Today items, there was no Touch Flo listed nor the HTC home plugin I was using earlier was listed.
A quick check in the registry showed the entries for Touch Flo (and also for the vanished HTC home) present under the Today registry entries.
Does this thing work on WM5 at all?
Am I missing something?
NOTE: I also installed the shared dll cab file.
Click to expand...
Click to collapse
eeh... wanted to say something but nevermind.....
dude the manilla 2d post is right here, it's still in development and needs so many windows mobile 6 and htc components from it running smoothly that it dosen't even work on wm6 that great good luck with the wm5 mabe the guys will be able to develop one for you
http://forum.xda-developers.com/showthread.php?t=398173
kristoff_sz said:
eeh... wanted to say something but nevermind.....
Click to expand...
Click to collapse
Why don't you say it?
always the same: a junior member trys a app, has a problem and opens a new thread (!) instead of posting in the right application thread or search there. frustrating and stupid.
Snniiff i have a wizard in wm6.1 , and i can t use manilla2D
This is a very Valid Thread,
But I will move it to the Wizard WM6 forum.
WM5 don't count on it, unless Dfereira comes back from sabatical
Also made it Temp Sticky because of it's current importance and interest.
Hope you guys get it figured out.
I have a wizard to Test out what you guys can dish out.
i try this
htc wizard accept install
but manilla2D don t play
Noelch said:
Snniiff i have a wizard in wm6.1 , and i can use manilla2D
Click to expand...
Click to collapse
1. Which ROM?
2. Which ROM?
3. Which Rom?
Share,
Dont' go posting you CAN if you can't
And if you CAN, then share HOW.
Thanks for your co operation.
I use TnT 20273 And It don't work...
Noelch said:
the rom : http://forum.xda-developers.com/showthread.php?t=395173
Click to expand...
Click to collapse
Not only that Mr Vd Spank has left a little KITCHEN
Have Fun.
Thanks for the Link Cooking Now (Again just a quick Proof of Concept test to be sure it CAN'T work)
Paradoxxx said:
I use TnT 20273 And It don't work...
Click to expand...
Click to collapse
This is now a Wizard thread.
Well here's what i'll be testing this weekend.
As i placed the new shared dll's into the rom i got no double file notice while using build OS.
So that means the files weren't there to begin with.
Which propalby means it's missing some registry entries to those files (besides the ones in the RGU file)
So that's the first thing to try.
After that it's comparing and comparing.
Volume did not work Start menu and Title bar did work.
Nice kitchen by the way makes a fast little rom so J.VD. Great simple Oem Pack, it's been two years since i cooked myself my own wizard.
No let's see if there's still some of the old Wizard Folk checking this forum, that have now turned cook that also want to return home.
Interesting
A moderator that has time to cook and for wizard men!!!
Hope it will be a good nice PRO try for TF2D in wizard, i think we cant do much cause the omap 195mhz so
GIVE IT A TRY is the cause of XDA isnt it?
+ Que PPC said:
A moderator that has time to cook and for wizard men!!!
Hope it will be a good nice PRO try for TF2D in wizard, i think we cant do much cause the omap 195mhz so
GIVE IT A TRY is the cause of XDA isnt it?
Click to expand...
Click to collapse
I have decided tonight to finish why i studied Cooking.
I Will Come home to finally cook a wizard ROM, and hopefully i will get a of the SPC crew along.
But i will need a little help, i've been spoiled not needing an Ext Rom anymore on the Elves, luckily i know how to use the search function
You heard it here first.
Noonski said:
I have decided tonight to finish why i studied Cooking.
I Will Come home to finally cook a wizard ROM, and hopefully i will get a of the SPC crew along.
But i will need a little help, i've been spoiled not needing an Ext Rom anymore on the Elves, luckily i know how to use the search function
You heard it here first.
Click to expand...
Click to collapse
if works i send you a hot brazilian chick as reward ;P
better then any buck on paypal
Nice, new serious topic for wizard.
Nice to see you here Noonski. i Hope porting its possible.
For my opinion : Manilla2D crash because DLL is missing or REg key is missing.
i will definitely be watching this .
hope it goes well
nice job in advance
waiting for the ROM
Really need to do some reading up first.
I'm thinking of using the Ext Rom a little bit differently.
Like move Some of the Skin files that don't need to be there.
Haven't seen that been done before
Just an idea, never tried it.
As for M2D at the moment, i would not bet on it. (don't want to set impossible standards at the moment)
That would really need Dfereira's experience for when he ported HTCHome to WinMob 5.
Maybe i can help.. If you need me PM me.
I'm also trying my best here and I'm trying some drivers from elf to see if it makes any differants.. we'll se how it goes and if I get anywhere it will also work on prophet
Related
Looks like , there is new WM6 ROM now (did not try it, for now).If somebady test it let as know.
dido said:
Looks like , there is new WM6 ROM now (did not try it, for now).If somebady test it let as know.
Click to expand...
Click to collapse
Downloading it. Will test it and report
what's the key search word?
I would search on the site (something like ppc and warez) where you could get the orwells1984. Same thread.... at the bottom of page 18. Haven't tried it myself yet.
vippie said:
I would search on the site (something like ppc and warez) where you could get the orwells1984. Same thread.... at the bottom of page 18. Haven't tried it myself yet.
Click to expand...
Click to collapse
Preliminary Review:
-----------------------
It is a PPCtuning.org ROM. It seems it is pretty fast with total commander, OMAP clock, Screen Off, keyboard fix, Simple plain fast ROM.
BTW: it is in the same place as the PDAviet4
look for that thread and you shall find it.
I just guessed and it was right there at the top.
is this really new rom or another orwells workaround?
does it have mms included?
other changes?
it has a cab for mms that you can install after.
Camera is working but i have some strange flickering...
Nice boot picture.
I`ll see if it steel hangs...
I was using pdaviet 3 and was ok. pdaviet 4 was a mess....
The only problem i had in pdaviet 3 was crashing of device.exe from time to time...
camera strange flickering
downloading the the underground crossbow now will let you know how it is
i found that if i uped the clock speed to much the camera flickered on pv4
Does someone know if java midlet manager is integrated into the rom?
underground edition crossbow
splash screen looks good
when install cabs security feature disabled
camera works no flickering
omap clock installed clock is set at 228 edit the smartskey.ini file in windows dir with tc and change to what you wish
after reset quick to reload
keyboard not right press y and you get z
if anbody has fix for the keyboard please post it in the mean time if i find on the threads i will post it when i find it
if anybody wants to know were they get the rom from pm me and i will point you in the right direction
easymob said:
downloading the the underground crossbow now will let you know how it is
i found that if i uped the clock speed to much the camera flickered on pv4
Click to expand...
Click to collapse
Yesssss! it was the overclocking... i set my speed back to 195 and camera works perfect!
Radio is included (2.47) and now I have to upgrade to 2.61 again.
First impressions - rom very good.
Missing some apps to be perfect (battery status, wm5 new menudryar-bluetooth, oxios memory).
It's based on orwell rom so there's no start menu sound fix included, voice command fix too.
This morning installed this underground edition..
after latest Molski, faria 3.3 V1, V2 and PDAVIETV4; this is the best one yet for me...
This one is smoother, faster and has evertything in it i want (mindlet also incluided; you have to install it afterwards from the install folder)
so if it stays this stable this is a winner.... and it looks like it.
This morning installed this underground edition..
after latest Molski, faria 3.3 V1, V2 and PDAVIETV4; this is the best one yet for me...
This one is smoother, faster and has evertything in it i want (mindlet also incluided; you have to install it afterwards from the install folder)
so if it stays this stable this is a winner.... and it looks like it.
Man I must be stupid or something. I have been looking all over and cannot find this rom and I am no NOOB?! I have a hard time on some of these non-english sites. If someone takes pity on me could you pm or email me a clue (or the link)?
Cause I have no clue now
Thanks,
Master K
[email protected]
Master K said:
Man I must be stupid or something. I have been looking all over and cannot find this rom and I am no NOOB?! I have a hard time on some of these non-english sites. If someone takes pity on me could you pm or email me a clue (or the link)?
Cause I have no clue now
Thanks,
Master K
[email protected]
Click to expand...
Click to collapse
Try google IW25NT
donwloading now. thanks for the help.
I've tried most ROMs on my wizzard, just hope this one is smooth enough for daily use. Faria's last release spoiled me....
u can also download it from here a direct link to the file underground edition crosbow:
http://rapidshare.com/files/16510198/5._Underground_edition_Crossbow_ROM.zip
This ROM is VERY good. I had been using Faria's latest on my phones but this is slightly better. Voice Command is in rom but needed the BT fix from another thread to amke the headset work right. A few tiny tweaks but 99% of my software is in and working great! It is fast and there is tons of memory.
The only thing I have not been able to overcome is lack of midi support. All my old .mid ringtones will not work at all. WM player will not play them anymore. From reading on the web I guess it's actually been up to device oems to include midi support even with WM5 but this rom does not have it. Perhaps a later one will. For now it's not big deal and I am moving on with this rom. Good Stuff!
Hi all,
I've seen others looking for this here, and while looking for something else, found a large VGA HTC Home in an Athena AX7510 ROM. I've extracted it from the Athena's OEMAPPS package and created a separate package with the relevant registry entries.
http://rapidshare.com/files/128346384/PJC_HTCHome.rar ---- OEM Package
http://rapidshare.com/files/128745613/PJC_HTCHome.cab --- CAB Installation
Note 1 - CAB Updated 08/07/10 - fixed "single tab" issue with some ROMs.
Note 2 - No Media player yet - looking into that now...
Note 3 - WARNING - the CAB is unsigned, and apparently this means that on some ROMs it won't install correctly.
-PJC
download then, and waiting for master
Hi pjc007,
You may try QuickCab by fellow xda developer IABovine. Hope it works, haven't tried it yet.
Does this htc home solves freezing issues in UNI?
Hi
I would be very happy to test it soon as someone can convert it in a .cab file
But I´ve tried a lot of ROM´s and several different htc home applications and always the same, when I recieve a call my UNI freezes imediatly.
I´ll wait for more comments
Cheers
Gracias
catch-22 said:
Hi pjc007,
You may try QuickCab by fellow xda developer IABovine. Hope it works, haven't tried it yet.
Click to expand...
Click to collapse
Thanks - that "just worked" - it'll be great once he adds in shortcuts!
-PJC
Cant use wheather
Hi sorry to ask, but too many information, how can i use wheather tab? nothing happens when I try to select my city. the rest of the buttons same problem.
Already read all the posts and links but, I have to say honestly I´m kinda lost...
Any help would be apreciated!
It´s the first htc home I can use wothout incomming calls freezing!!!
Gracias
orb3000 said:
Hi sorry to ask, but too many information, how can i use wheather tab? nothing happens when I try to select my city. the rest of the buttons same problem.
Already read all the posts and links but, I have to say honestly I´m kinda lost...
Any help would be apreciated!
It´s the first htc home I can use wothout incomming calls freezing!!!
Gracias
Click to expand...
Click to collapse
Weather (and contacts) should now be working correctly. Please try the new CAB in post #1.
Let me know of any other problems.
Thanks,
PJC.
i hope this is not from mobility touch commander..
cause i downloaded from the other thread and it is..
my problem is it consumes up to 6mb of my ram using tomal 8.0 beta
HEY MAN GREAT JOB....AFTER INSTALLING THE CAB ALL ICON ARE MISSING EXECPT THE "HOME"....HARD RESET AND RE INSTALL AGAIN BUT THE RESULT STILL THE SAME
I'LL STICK WITH SNAPVUE PERFECTLY WORKED ON ALL UNI'S ROM'.
http://vidmes.com/xda/Uni/Tools/
lorgem said:
HEY MAN GREAT JOB....AFTER INSTALLING THE CAB ALL ICON ARE MISSING EXECPT THE "HOME"....HARD RESET AND RE INSTALL AGAIN BUT THE RESULT STILL THE SAME
I'LL STICK WITH SNAPVUE PERFECTLY WORKED ON ALL UNI'S ROM'.
http://vidmes.com/xda/Uni/Tools/
Click to expand...
Click to collapse
If all icons are missing the likelihood is the CAB couldn't update your registry properly (it isn't "signed") -- it's working as stated on my ROM (based on Tomal V7.7) which has security checking disabled.
-PJC
euclanville said:
i hope this is not from mobility touch commander..
cause i downloaded from the other thread and it is..
my problem is it consumes up to 6mb of my ram using tomal 8.0 beta
Click to expand...
Click to collapse
I took it from the Ahtena X7510 ROM, but as with ALL versions of HTC Home, it likely will use a large amount of memory.
(I'm looking into something else at the moment, so can't check).
-PJC
hmmm strange im using tomal v7.7 and v8.0 hard reset doesn't work i think the only solution is to reflash my uni.
Anyway great job
nice job...
BTW: chande the links in the first post.. you have cab on the oem link..
V3S said:
nice job...
BTW: chande the links in the first post.. you have cab on the oem link..
Click to expand...
Click to collapse
Ooops!! Swapped, so now correct...
-PJC
lorgem said:
hmmm strange im using tomal v7.7 and v8.0 hard reset doesn't work i think the only solution is to reflash my uni.
Anyway great job
Click to expand...
Click to collapse
Hmmmmm - I got the chance to test on a different ROM, and saw the same as you. HTC Home Customizer let me bring the other tabs back, and after a soft reset, it worked fine.
Let me know if you want HHC uploaded (I can't remember where I found it, sorry!).
-PJC
Somehow I can't get it to work. It installs fine (along with HTC Home Customiser) but it doesn't show on my today screen when I select it, even after a soft reset :/ any ideas?
No complete icons showing
Weather (and contacts) should now be working correctly. Please try the new CAB in post #1.
Let me know of any other problems.
Thanks,
PJC.
(Quote)
Hi PJC
I simply can´t see the rest of the icons...
What I´m doing wrong?
Thanks for your help!
Gracias
orb3000 said:
Weather (and contacts) should now be working correctly. Please try the new CAB in post #1.
Let me know of any other problems.
Thanks,
PJC.
(Quote)
Hi PJC
I simply can´t see the rest of the icons...
What I´m doing wrong?
Thanks for your help!
Gracias
Click to expand...
Click to collapse
As I mentioned earlier, I see this too with a different ROM. On further investigation, it seems that the registry value HKLM\SOFTWARE\HTC\HTCHome\Tabsettings is being set to '1'.
*DELETING* this setting from the registry worked for me, and all the tabs appeared.
I'll see if I can see if there's something wrong with the CAB, and if so I'll fix it and re-upload, but you should be OK by making that registry change.
-PJC
Its very closer like, this make lot of consumable memory, try to install at storage card, can do this?
As I mentioned earlier, I see this too with a different ROM. On further investigation, it seems that the registry value HKLM\SOFTWARE\HTC\HTCHome\Tabsettings is being set to '1'.
*DELETING* this setting from the registry worked for me, and all the tabs appeared.
I'll see if I can see if there's something wrong with the CAB, and if so I'll fix it and re-upload, but you should be OK by making that registry change.
-PJC (Quote)
Did you mean deleting this registry? or just the value of "1", in that case which number I should put?
Thanks a lot!
Just checking if anyone at all has gotten TouchFlo 2d working on the wizard. I'm using j.vd.spank's wm6.1 and all I get is a today plugin which says click here to launch TouchFlo or something like that, but nothing shows up on clicking.
Is this a rom problem or is something incompatible with the wizard?
I've just tried yesterday. Same problem.
Yeah I Recommend Not To Install As Me Too Faced It & Had To Reset My Pda
Same problem here. Only TouchFlo Message on Toadyscreen.
me too!!!
I780 - 320x320 resolution - 128 dpi (the same with 96 dpi)
I got one of the first versions to run but the wizard is toooooooo slow to handle it. it was running at 1.97 frames per second and it looked like it needed to be around 24 to function. Great looking program but my wizard is slow.
The first version was Touchflo 3d which required more intensive processing. TouchFlo 2d seems to work fine on other (similar to wizard) xdas.
perhaps it would work if it were cooked into a rom?....can we get one of the cooks to see if that works?
Same Problem Here...
Maybe a rom Cookers can search the missing(s) file(s) ?
I think its doesn"t work because one (or a lot) of file(s) are/is missing on the wizard.
Or (if my brain is not corrupt) like the TouchFlo Port, its maybe a missing Reg Key.
c4software said:
Same Problem Here...
Maybe a rom Cookers can search the missing(s) file(s) ?
I think its doesn"t work because one (or a lot) of file(s) are/is missing on the wizard.
Or (if my brain is not corrupt) like the TouchFlo Port, its maybe a missing Reg Key.
Click to expand...
Click to collapse
I'm trying to get this into a rom and will report back on how it goes
it does not look like it's going to work straite out of the box
any idea what is the problem gollum?
maybe we will need some special hack to get this working on our wizards?
I've tried this on both 20273 (tnt's b3 release and another) to no avail, so even some ported from diamond dont seem to work. someone on an engadget mobile comment said they got it to work. what could we be missing?
That would be me(Christian Walters) on the Engadget Mobile comment that said it worked...and it did...twice. I got it too load on a hard reseted Wizard runnin the beta one of the newest TNT ROM, but never again...I dont know whats wrong with it:/
ashasaur said:
That would be me(Christian Walters) on the Engadget Mobile comment that said it worked...and it did...twice. I got it too load on a hard reseted Wizard runnin the beta one of the newest TNT ROM, but never again...I dont know whats wrong with it:/
Click to expand...
Click to collapse
Hi Chris! Bummer that we can't get it to work again, and after all that time installing too
For me on the lastest TNT Rom it never started realy realy strange.
c4software said:
For me on the lastest TNT Rom it never started realy realy strange.
Click to expand...
Click to collapse
Same thing here. Let's hope Gullum comes up with a nice working rom (thanks in advance for the hard work).
i'm sure its due to a missing reg key (or DLL)... if only trace debugging tool exist on WM.
Hmm bad news :
ELVES
Polaris
Kaiser
Artemis
Hermes
NIKE
Herald
Trinity
Titan
All devices of this lis have an QualComm chip... Manilla 2D use certainly native routine of this processor so using it on an ARM based device are certainly impossible.
c4software said:
i'm sure its due to a missing reg key (or DLL)... if only trace debugging tool exist on WM.
Hmm bad news :
ELVES
Polaris
Kaiser
Artemis
Hermes
NIKE
Herald
Trinity
Titan
All devices of this lis have an QualComm chip... Manilla 2D use certainly native routine of this processor so using it on an ARM based device are certainly impossible.
Click to expand...
Click to collapse
You are wrong, not all of those devices have qualcomm chip. Hermes have samsung and it works on touch which has omap 850 processor.
Sorry for this quickly conclusion, i hope Golumm (or anybody else) find the way to use it on wizard
I've got some of the apps to work on but not manila yet but I will try again and again and again
I'm shure it's just some dll thing
couple weeks ago i download tf3d cab on my tilt and loved it, however, i couldn't get the phone to turn off the screen (obvious bug), but now that theres a fix for it, i came back to redownload and install it, but the thread has vanished! or am i blind? iv'e searched everywhere but can't seem to find it...anyone know where it went?
it was closed, you'll have to search for it because its a few days back. Download was removed off of first post though as well.
noobs ran everyone off that was working on it from what i was told
im working on TouchFlo 3D HD to work on kaisers
is it over?
is the development terminated or just postponed? that program was much better than manila 2d imo.
crazy is the man
sounds awsome crazy, u da man! will u post ur release in this section? or in the kaiser forums?
probably here if someone can change the title...I'm gonna need help from ChainFire because there are more than 1000 files of manila's and it's gonna take too long. Can someone please contact him?
Crazy, why don't you pick up the original M3D that was develop from the original people or ask them to pick up the project if it was terminated or postpone. Starting from scratch is gon be another big long thread with same repetitive questions and then we'll have 2 big thread. Its good to hear your working on it and thank you
i agree with xenn...
Xenn said:
Crazy, why don't you pick up the original M3D that was develop from the original people or ask them to pick up the project if it was terminated or postpone. Starting from scratch is gon be another big long thread with same repetitive questions and then we'll have 2 big thread. Its good to hear your working on it and thank you
Click to expand...
Click to collapse
I have that too and also I have touchflo 3d HD. I'm gonna have to resize some of the files because it won't fit into our devices. TouchFlo 3D HD is already running on Xperia X1... djboo is not coming back never again so I guess ChainFire is the only one who can help me with this project.
please pleae get tf3d working my boss has an omnia and he loves showing it off.
I would love to see this....
About kaiser fixed with roms !! lg users have bigger problems with images stuck all the time and stupid lines in screen.all people leave it why?? tf3d for qvga its next revolution i cannot understant why takes so long too fix this problems..................................dammn its so close too finish ......
Why did the development stop....and is there a cab version to try?
tnx
rickncst said:
couple weeks ago i download tf3d cab on my tilt and loved it, however, i couldn't get the phone to turn off the screen (obvious bug), but now that theres a fix for it, i came back to redownload and install it, but the thread has vanished! or am i blind? iv'e searched everywhere but can't seem to find it...anyone know where it went?
Click to expand...
Click to collapse
http://www.google.be/search?hl=nl&q=tf3d-qvga&meta=
I had tf3d running on my brother's phone and while it was a marvel to see on a qvga device it was nothing like the tf3d on my touch pro. It worked, yes, but it was very buggy and unstable
I tried to install the tf3d-qvga.cab & HTC-CA-Kaiser-Drivers.cab on a tilt I got my hands on the other day but it just kept giving me the "Tap to Launch" message. It was running the factory rom, anyone know if tf3d requires wm 6.1? Dont know what I'm missing
-sosloe
i'd just like to point out again that TF3D port to qvga is FINAL...there is nothing else to fix in the program it self...it is final...the power bug is driver related
about TF3D HD i'm already porting it to qvga, it takes a bit of time to fixe height of new tabs but i'll get it done soon...probably in 3 days max...my laptop is down at the moment
pcarvalho said:
i'd just like to point out again that TF3D port to qvga is FINAL...there is nothing else to fix in the program it self...it is final...the power bug is driver related
about TF3D HD i'm already porting it to qvga, it takes a bit of time to fixe height of new tabs but i'll get it done soon...probably in 3 days max...my laptop is down at the moment
Click to expand...
Click to collapse
the TF3D HD and TF3D have's the same power problem or are they diferent?
i haven't tested the TF3D HD that's why my question.
i have a polaris
maxniper said:
the TF3D HD and TF3D have's the same power problem or are they diferent?
i haven't tested the TF3D HD that's why my question.
i have a polaris
Click to expand...
Click to collapse
same problem...its the drivers...the power problem is drivers and all 3D application are affected
[SJK] Gonzo WM 6.5.1 build 23070/23071 updated yet again with new apps & boot screen
I have updated this thing using the 23070/23071 build in Ivan's Super Just Kitchen. I wanted to contribute something to the community for those who are either new to flashing their Wing, or those who don't have a regular SD card and can't do a HardSPL. It's got just the basics to get one by. www.thewingster.com is a great place to find additional apps for your phone like Office and Adobe Reader.
Below is some details regarding this latest creation.
RUU friendly!
27.97 MB Main Memory
20.89 MB RAM free
6MB Pagepool
What's cooked in
New Boot screen and altered welcomehead96.jpg
Default wall paper changed
fingerkb with the black and red skin
Remote Desktop Mobile (cooked in by accident, too lazy to re-cook with out)
Herald Touch Dialer
Fart Machine
TCPMP .81 With FLV and WMV support (much leaner than media player)
Total Commander (got the file associations set up)
Auto Screen Lock (for going back to old school lock)
Opera Mini 5
Arcsoft MMS 5.2.2.37
XDA Shutdown
Amarullz Red Black Theme
Glass Theme
Home Screen Plus Plus, (I did it for the task manager, you'll have to enable it through the options and map it to the button that would go to the Comm Manager... just my suggestion)
Net CF 3.7
DOPOD SIM Manager
Voice Recorder
Camera
Esmertec JBED
Search Phone
Bluetooth Explorer
Internet Sharing
File Exploder
Notes
Solitare
Calculator
Windows Media Player
Active Suck err Sync
[I keep Adobe installed on my sd card]
HERALD USERS: GO HERE TO FIX THE KEYBOARD: http://forum.xda-developers.com/showthread.php?t=360127
By the way, I manually installed Rock And Republic Black theme without the other ones, i'll throw the zip file at the bottom of this post so u can grabs if u want. Just throw it in your /Windows folder
Things to do...
> Animated start up screen with sound
> A different start button, so tired of the M$ logo everywhere
> Tinker with certain plugin settings and defaults
> Pre arranged start menu
Grab this bad boy here
http://www.4shared.com/file/145306784/7ce8e0e8/Gonz023071newboot.html
Get the old one here
http://www.4shared.com/file/142824761/eda86c4f/Gonz023071.html
Suggestions and tutorials are welcome... after all I am still a Noob, I promise this ROM will not set your wing on fire. Credit goes to Ivanmmj for all his hard work into the kitchen! Also credit goes out to the artists who designed the pics I used for the boot, welcomehead, and wallpaper
I am still trying to figure out how to edit the default home screen with different things. Cause IE is lamzor is the favorites...but you can't edit the favorites....I guess I will have to turn into a forum troll.
Your guess is as good as mine, I manually put in that wall paper after flashing. But that would be another thing I would like to know as well hehe
You know you can edit your posts, instead of starting a new thread lol
ace10134 said:
You know you can edit your posts, instead of starting a new thread lol
Click to expand...
Click to collapse
YAY!!! I DID IT!!! I edited a post and updated the links... no more cluttering up the board!
Dr.Gonz0 said:
YAY!!! I DID IT!!! I edited a post and updated the links... no more cluttering up the board!
Click to expand...
Click to collapse
LOL (Pats Gonz on the back).
hehe bump
hi
Thanks. everything very good, expect more
hello this rom is good for the herald p4350 ????, greetings from Venezuela
excuse my English
No worries about the english, hehe I can read the words u type. This one is pretty much good for just the Wing... I may throw a herald version out as soon as I get the next build workin right.
ok hopefully come because I want to upgrade my Herald, which rom do you recommend??? thanks for responding so quickly congratulations on your rom
jeanhaker said:
ok hopefully come because I want to upgrade my Herald, which rom do you recommend??? thanks for responding so quickly congratulations on your rom
Click to expand...
Click to collapse
Well you can flash this one to your ROM, you just have to do the Herald Keyboard Fix found on the forums somewhere here. That's the only difference between the phones.
ace10134 said:
Well you can flash this one to your ROM, you just have to do the Herald Keyboard Fix found on the forums somewhere here. That's the only difference between the phones.
Click to expand...
Click to collapse
Good lookin out on that info man. Now I know (and knowing is half the battle). I'll have a 23081 build up later on today hehe.
UPDATE: 23081 has it's ups and downs, I am still tryin to work out some bugs (SIP switching issue, and shortcut problem). Not sure if I should just go with EZinput or still work on fingerkb... the shortcuts is a whole different problem. Time is somewhat of an issue as well. Perhaps I should try beefing up 23071, I dunno at this point...
ANOTHER UPDATE: decided against throwing 23081 up coz it's not respecting my authority! but enjoy my latest creation
I really like this ROM but when it is installed I can not get online, if I use the Glass ROM or the original I get online no problem until I install this one I am probally not doing something right
From what I notice I guess some ROM's already have carrier settings plugged into them. I've got a thread over here that should help u get back online.
http://forum.xda-developers.com/showthread.php?t=560055
Thanks for the ROM and thanks for letting me know how to get back online
barryadair said:
Thanks for the ROM and thanks for letting me know how to get back online
Click to expand...
Click to collapse
I'm guessing you're talking about the t-mo settings. Thanks for confirming it works... I always wanna post just good info... since I'm on AT&T it's kinda hard for me to confirm the t-mo post. If you like this one, you'll like my 23089 I should be uploading soon.
Congrats, Gonz.
One day I am going to compile my own ROM. I want to wait though and see if my ROM ideas get created by Microsoft first..
Good luck,
~TRIB
hey do i need to format to fat32 and flash to sd for this update??
The thing is designed to be used through the RUU, but if you want I don't see any issue with flashing through an SD card.
Make sure you're Hard_SPL, and as long as your card is a regular Micro SD and not SDHC... have at it.
I should really throw a new release out there