Hi All,
Has anyone experienced this:
Talking on the phone using a bluetooth hands free (Moto H500) and any kind of notification comes in (new txt msg, new voicemail, low battery, etc) the call switches from the headset to the handset. I only had this happen in the WM6 ROMS, but it has been in all the ROMS i have tried. Maybe there's a fix i missed somewhere, maybe it only happens to me... Any thoughs or suggestions would be greatly appreciated.
thanks
Ya, I have the same issue with the WM6 ROMS.
I think I solved it though. You have to set Voice Command to only announce notifications though the device speaker. That seems to have solved the (annoying) issue for me.
Thanks for the info GadgetGuy, I'll give that a try... I just prefer that the people around me not know I just got a new message or my battery is low... If I find anymore on that I'll post again.
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
deechte said:
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
Click to expand...
Click to collapse
Does a different radio ROM help?
I'm a bit scared for doing that... It hasn't always been like this, so I'd rather send it back I think.
deechte said:
I'm a bit scared for doing that... It hasn't always been like this, so I'd rather send it back I think.
Click to expand...
Click to collapse
If it's under warranty, do that!
deechte said:
Every now and then, probably after using it for a couple of days, my TC gets problems with the phone function. First, it will not notify me of incoming calls, these get diverted to the voice mail. Second, when I try to make a call, it starts to dial, but the dialing never succeeds. After a minute or so of dialing it just ends the call.
I found out the following funny thing: when it is dialing, if I push the off-button at that time, the screen goes off and the sound comes on. I'm even properly connected to the person I'm trying to call!! So the connection was already there, I just can't hear anything, neither can the other person, until I push the off-button.
This behaviour doesn't happen all the time, just after a day or so of use. The solution is to soft-reset the device, not really a solution though in my opinion. Switching the phone off and on in the comm.manager doesn't help. Is there any bettter solution? I'm using the standard dutch ROM.
Thanks! Wouter
Click to expand...
Click to collapse
I'm experiencing exactly the same problem since a week with bepe 0.67 rom.
Please, anyone with the same problem?
sounds a little similar to this...
http://forum.xda-developers.com/showthread.php?p=2374406
hopefully that ^ solves the problem
Thanks for your reaction. It's not the same problem though, when my problem occurs it stays. I can never make a phone call normally again anymore, nor receive a call. I have to soft reset.
Kukatrap said:
I'm experiencing exactly the same problem since a week with bepe 0.67 rom.
Please, anyone with the same problem?
Click to expand...
Click to collapse
Do you have Webis Note2Self installed?
I cloned my device's software and settings to a new one from the shelve. After a few days the problem occured again. So it's probably not a hardware problem in my case. With the problem occuring, I changed the phone settings from Auto to GSM and the UMTS settings from Auto to GSM(900+1800)+UMTS(2100), both didn't solve the problem when it was occuring.
Then I opened Memmaid and discovered there was an instance of Note2Self (Webis) under the running processes. I closed that one down and closed Memmaid and then the problem was gone!!
On their forum, other users report about audio issues. I'm looking in to this further. I'm using N2S 2.01 build 2326.
[edit]
Yes! Upgrading to version 2.03 solved my problem! Finally!
deechte said:
Do you have Webis Note2Self installed?
Click to expand...
Click to collapse
Yes, I am!!
I'll upgrade, thanks.
I had the same issue with the standard WM6 ROM thats the whole reason I changed to Diamond R4 ROm, has not happened since then. One thing I did notice is that I had my phone in my hand and it came out of sleepmode by it's self and 3 minutes later after putting it back to sleep I receive a message to say I had voice mail. Now I am thinking that the phone knew a call was comming in but it was to lazy to ring so it just sent it to voice mail. When I tried to call voice mail the phone connected but there was no sound. I had to power cycle the phone for it to work again.
I have an HTC Fuze with a windows mobile 6.5 rom installed.
Well I have a call waiting the device does not trigger an audio alert. I therefore miss the call.
The phone does however turn on the backlight and display the incoming call but, as you can imagine, I am not looking at the device while I am speaking on the phone.
I checked sounds and notifications but did not see a "call waiting" event.
I have gotten everything else to work well but am considering going back to 6.1 if I can't resolve this issue. I am new to this world and appreciate your understanding.
Please Help
I'm having the same problem, did you find an answer?
I also have the same problem on the Feb 6th release of the Energy ROM. If you find an answer please post it. Thanks.
Found Solutions:
http://discussion.treocentral.com/t...n-sounds-while-call-can-we-stop-some-how.html
http://forum.xda-developers.com/showthread.php?t=478921
Hi all!
I have a small problem with my LG KS20. Probably caused by a beta version of a piece of software I installed. The problem persists even if I uninstall it, so I'm not sure its because of that.
Sometimes when I call somebody I hear two almost simultaneous call tones instead of one. This was happening all the time. The problem know is that one of the call tones persists even after the call is answered and even after I hang up. I have to soft-reset in order to stop it!
Any ideas?
you could try using SPB Phone Suite
im just guessing here, but you could install the trial version, assign a new ringtone and see if ur problem is fixed.
if its a hardware issue i dont think people here could help as they focus on HTC made devices.
gud luk!
I did search the forums but didn't see a fix or regeidt for this. I have a new Verizon xv6875 Touch Pro 2 (win 6.5). My Jawbone2 is mearly useless with this--the volume is so low that nobody onthe other can hear me (and I can't hear them). Voice Command volume is so low that when I hear the faint beep VC can't hear my command.
Does anyone have a regedit or cab file fix for this?
I know there are known issues getting caller ID via VC to the bluetooth headset and/or ringtone, but if you can fix those without a custom ROM flash, you're a god and I'll donate.
I'd be happy to donate just to get the bluetooth volume on the jawbone2 fixed.
I can't flash to a custom ROM because its a corporate device (though I can modify with cas and regedits)
Any help is deeply appreiated. I apologize if this has already been addressed, but I've searched and am unable to find anything. (I've tried resetting the jawbone and re-pairing the device. Hard reset the ROM last night.) I'd love it Jetware worked with this stack, but alas.
Lilmac, you out there? NRGZ28? Sleuth?? Help guys
How long u had your TP2, coz I have a Sprint one paired with a Jawbone and works as advertised. Try the Jawbone with another unit to eliminate the possibility of it being jacked. If another hard reset doesnt do it, I will install 20% loubder phone can, I cant attach it as my connection is shaky,email me ...and i will send it over...
Can u pair anything else with your TP?
Good luck dude
please e-mail it...
I think this is a known issue on the xv6875. Have done two hard resets, no other issues.
Please send the 20% booster. [email protected] THANKS!!!
Please send the 20% booster to [email protected] also. TIA
all you need is the tweaked audiopara3.csv on ppcgeeks site.