Related
hi,
today it happened for the second time: my 750v completely went silent. there was no sound although i had sounds turned on.
the startmenu and all other sounds where completely muted.
i needed to restart my device and the sounds were back again.
strange.
does anyone have the same problem?
Hi, this is a know issue of the Treo. There will be an update available soon
ah, ok. didnt know that
Yeah I have had this issue too. I hard-reset my device and it hasn't happened again. Not sure if it is to do with some application I had installed, but it hasn't happened since.
If there is an update coming I am looking forward to it
Same here
Yeah I have had this a few times before! Oh well I'll just keep an eye on the old updates page on the palm site!
Ho Hum
i had this problem as well... and mine a little bit different, the sound is mute for the ringtone only. it happened for few times. it cant be solve even i soft reset the device! have to hard reset
i use the ringer switch very frequent...
Had the same problem, no sound at all.
Solved: disabled all voice commands, never happened again.
Am on my 3rd Treo as even hard restetting was not solving the problem!
Craig
rmaat said:
Hi, this is a know issue of the Treo. There will be an update available soon
Click to expand...
Click to collapse
Did they fix this problem with the sound? I just got my 750 (unlocked in US - T-Mobile) and the sound is a pain in the nec. Please let me know where I can find the solution. Thank you.
Idem i need to do a soft reset to get sound.
postbus31 said:
Had the same problem, no sound at all.
Solved: disabled all voice commands, never happened again.
Click to expand...
Click to collapse
Same solution worked for me, disable (and stop using. unfortunately) voice command.
I disabled it. Been using it like this for the past 2-3 weeks and the sound issue has not come back.
I have disabled voice command but it doesn't fix the problem, today i missed 7 calls
Palm please fix it with a rom update with wm6 !
How to REMOVE Voice Command from the 750
http://discussion.treocentral.com/showthread.php?t=138317
Disable all voice command settings and that should fix the problem until the WM6 upgrade is available...
Anyone have any luck getting MC VC 1.6 to work on the Touch Cruise via bluetooth? I can get it to work via the buttons on the TC itself, but not via any of the bluetooth headsets I have. I also have an AT&T Tilt and 8125, and I don't have any issues using MC VC 1.6 and bluetooth headsets with either of those phone.
I've tried all the fixes I've found so far, but none of them have worked so far. If anyone's got any ideas how to get this working, I could use some help.
Stumped,
Dave
Hi Dave. I have MS VC 1.6 up and running on my TC via bluetooth on my Jawbone no problem. Know it doesn't help to answer you questions, but it does work.
Dan
Dan, thanks for the reply. I got it working, but had to jump through some hoops to get it working, and I'm not sure which step was the one that finally got it working. Seems to be working OK, but I no longer have a flashing blue LED light on the TC to show that Bluetooth is turned on.
Did you have to do anything special to get it working? Can you tell me what build of MSVC you're using?
Thanks,
Dave
MS VoiceCommand v1.60.4622.0
Hi and sorry for my pour english,
I installed MS VoiceCommand 1.6 Fr on my HTC Cruise.
Everything works fine except that the blue LED does not flash when I turn "On" the BT.
If I remove MS VC with the BT "On", the blue LED restart to flash. And if I reinstall MSVC, it stops blinking.
I still have a look at this forum and the other ones, but I didn't found the solution.
Maybe someone can help me ?
Bemi
How could i get this to work on the S9's on the Tilt and 8525 instead of the voice recognition app?
MSVC Broke my BT,could not connect to my Moto S9 with it installed. Had to uninstall VC to get BT back. Anyone else have this prblem?
bemi said:
Hi and sorry for my pour english,
I installed MS VoiceCommand 1.6 Fr on my HTC Cruise.
Everything works fine except that the blue LED does not flash when I turn "On" the BT.
If I remove MS VC with the BT "On", the blue LED restart to flash. And if I reinstall MSVC, it stops blinking.
I still have a look at this forum and the other ones, but I didn't found the solution.
Maybe someone can help me ?
Bemi
Click to expand...
Click to collapse
Bemi, exactly the same thing for me, with MVC 1.6 fr on my TC french SFR opérator
waiting for some trick to fix that blue led
I have the same problem with the blue light (it is really a very strange bug...)
An other question, with BT on: I try to use the vocal command with the head set and the phone on stand by nothing happens if I turn it on the phone (but the phone is still locked) nothing happens. I have to unlock the TC to be able to use the MSVC with a bluetooth headset.
is it normal???
Hope my question is clear...
Thank for any help/info
dfields said:
Dan, thanks for the reply. I got it working, but had to jump through some hoops to get it working, and I'm not sure which step was the one that finally got it working. Seems to be working OK, but I no longer have a flashing blue LED light on the TC to show that Bluetooth is turned on.
Did you have to do anything special to get it working? Can you tell me what build of MSVC you're using?
Thanks,
Dave
Click to expand...
Click to collapse
@dfields,
Could you please explain what you did to get VC to work? does your BT work after instaling VC? Not just the flashing LED but are you able to connect to a BT headset?
XDA Orbit 2 and Voice Command does not announce incomeing calls
Hi,
my device: XDA orbit 2 = Touch Cruise = Polaris
OS: WM6 GER
VC 1.6 GER
I know that there are problems, but i also do know, that it can be solved. there are some files to be replaced on the phone. i tried the ones that are offered in another thread for another wm6 phone, but the dont work. i guess, because they are for the english version of VC 1.6, but i have the german version.
does anybody know, wher i can get these files? or how can i make VC 1.6 to announce incomming calls on my xda orbit 2?
Thanks
I have just upgraded to the tilt .
I have installed ms voice Command 1.6 and also the bt voice Command hack to allow voice Command to come over my bluetooth . Well it's not working . even if I edit the reg. I also tried the vc16btfix , still didn't work. is there something i'm missing ?
criddle said:
I have just upgraded to the tilt .
I have installed ms voice Command 1.6 and also the bt voice Command hack to allow voice Command to come over my bluetooth . Well it's not working . even if I edit the reg. I also tried the vc16btfix , still didn't work. is there something i'm missing ?
Click to expand...
Click to collapse
I have 8925 with Custel ROM. I've read here and there that people upgrade and install the BT Hack...
But I never had to. I had the 8525 and I remember I had to add the BT Hack (and give it like 15 seconds or whatever...) to transfer all audio to BT. But at least on my 8925, right out of hard reset, VC 1.6 works fine with my BT Headset (Jabra, Jawbone, few Motorolas, etc...all of them works fine).
Search button is a good friend on this forum it helped me find my solution for this exact same problem
Try this:
Edvard_Greig said:
Hallelujah! I finally figured it out- so it did have to do with the XCSDM setting I believe... so here is what I did for anyone else that is wondering:
1. Installed MSVC 1.6 (from the link in the TNT ROM posted earlier)
2. Soft Reset
3a. Made registry change to set Path = \Program Files\Voice Command\voicecmd.exe (no quotes)
3b. Change button assignment (assigned to Button 6/PTT in my case)
4. Soft Reset
5. Enable XCSDM
6. Soft Reset
7. Disable XCSDM
8. Soft Reset
9. Pair Bluetooth Headset
It seems to be working...the best I can figure is that when it initially gets installed the XCSDM doesn't have any value at all, but by enabling it, and then disabling it, it actually turns it off as opposed to having a null value. Also note that since I am using Alex's 'UltraClean' ROM, there were never any Cyberon installation traces, and therefore I ignored those sections.
In any case it seems to be working great and I'm very happy.
Thank you everyone for all your help, and hopefully what I listed above will help someone else.
Click to expand...
Click to collapse
found in this thread over here: http://forum.xda-developers.com/showthread.php?t=333260&highlight=Microsoft+Voice+Command&page=16
i'm using the original wm6 that came with th tilt. when I do push the button on my headset it's like all the handset volume is transferred to the headset
i had same issues then i tried the steps above and solved my problem i'm not on the original att rom anymore though i'm using dutty's dualtouch v3 rom. You should try those steps mentioned above should solve your problem if not then dunno sorry i went crazy my self trying to fix this problem then when i tried this solution it worked i was so happy all the headaches and times searching forums finally paid off LOL. Anyhow good luck.
Running Dutty's v2K fixed and . . .
no issues with MSVC 1.6 without hack. sometimes stops responding but either turning my BT off and on again, or SR fixes it. Using a Jawbone if that makes a difference.
Problem after updating to new ATT Tilt Rom
I cant use voice command through the headset anymore after upgrading the rom from HTC. What happens now is when I press the Bluetooth button it transfers any sound to the headset (Music playing from MP or in call voice) but will not allow me to use any Voice command functions.
Please HELP!!
Redundant...
Another dead thread that wouldn't have to be killed if the search function was used...
I posted a couple of days ago but didnt really explain properly so starting again.
I have a touch pro, with romeos2 rom installed. I have tried the 1.51 and 1.60.1 builds.
the device pairs find, picks up phonebook etc fine. but i cant dial from the headunit. its driving me insane. I havent tried with other roms apart from romeos2.
Sometimes it will dial but only if you dial on the headunit then turn phone off and on. it seemed to work slightly better with romeos1.51 but still useless.
Does anyone have any ideas? meh... getting annoyed with this
p.s. i tried my friends touch HD and works perfectly, 100%. he has windows build 20757
UPDATE: incase anyone else is having issues
Monx (romeos2 legend) has asvised to try installing the BTSAP profile when using his rom. I havent tested yet but will try tonight.
What i did find is that I tried the windows build my friend had and that didnt help, issue was the same. I tried another radio 1.02.25.31, same problem only worse. then tried flashing RRE 3.1 fuze rom and at the same time 1.08.25.20M1 radio. Now the phone works in the car, responds to headunit dial requests.
New problem is that it doesnt download phonebook to the headunit.
will keep posted on progress if anyone is having this problem
same here, im running Romeos 1.5x final touch pro rom on my fuze.
paired fine, cant make phone call, the car shows no connection
i tried install BTSAP, BTSAP, BTBPP, doesnt work...
please help, i really like romeos rom
Its working!!! i reflashed romeos 1.60.2 and installed the btsap profile and its working.
I dont think its the btsap that did it as from what i gather the btsap is to access the sim card of your phone to use it remotely in another phone devide in a car stereo and i dont have that.
I think the think that fixed it was flashin the australia radio 1.08.25.20M1.
It responded instantly to dial requests and pairs fine!
teddyonair said:
same here, im running Romeos 1.5x final touch pro rom on my fuze.
paired fine, cant make phone call, the car shows no connection
i tried install BTSAP, BTSAP, BTBPP, doesnt work...
please help, i really like romeos rom
Click to expand...
Click to collapse
Try flashing the australia 1.08.25.20M1 Raphael radio and see if that works.
Also have you tried Jetware handsfree extensions? Some head units need this to work properly, and i think pioneer has issues if its not used.
1.08.25.20M1 ? I've been using this radio since they first posted it here.
so i dont think its the radio thats blocking it
any other suggestion?
btw i have a kenwood navigation with bluetooth add-on. works fine with my tilt and all the other phones.
thanks in advance...
teddyonair said:
1.08.25.20M1 ? I've been using this radio since they first posted it here.
so i dont think its the radio thats blocking it
any other suggestion?
btw i have a kenwood navigation with bluetooth add-on. works fine with my tilt and all the other phones.
thanks in advance...
Click to expand...
Click to collapse
did you try the Jetware handsfree extensions? http://www.jetwaremobile.com/index.htm
well after all that, i hard resetted my device again to setup up from scratch, tested with new radio and it didnt work.
Sooo... installed the BTSAP profile and working fine so looks like that was the cause of my problems all along
thanks for testing that for us...
i installed BTSAP in my fuze still no luck...hopefully more people will come in and share with us how their setup works
well after all that mine isnt actually working properly arrrrrrgh
I just did few tests as have been messing with phone at work then quickly testing on breaks. anyway basically if the phone is on it seems to work fine and connects/dials calls perfectly since installing btsap....
however.... if the phone goes in to standby for a length of time it doesnt wake up when i try and dial from the headunit. If it then turn the phone on again it will start dialing.
This is totally 100% doing my head in as just spend bloody 90 quid on the bluetooth thing for my car
Anyone got any ideas why it wont wake up when dialing from bluetooth handsfree? The dial command obviously got to the phone as it starts dialling when you take it out of standby.
HELP! lol
Glad to see I am not alone in this. What a pain! Can someone tell me where to download the BTSAP cab? I will try that and jetware to see if it helps. I have a Kenwood head unit that also allows for SMS via the head unit but it doesn't work with my Fuze. Anyone else have that feature working?
Thanks
When i try to run Voice Commander I get an out of memory error. I am running version 1.6.19209 Anyone else tried this or gotten it to work?
I'm using 1.6.21040.
Gave an error during installation, but seems to be working as far as announcing calls and reading texts.
I have tried to installed version 1.6.21725 and it seems to work fine, but I tried to link to the key virtually using AE Buttons, everything collapsed. The lnk file just got deleted: any suggestion.
How did you guys use to assign to a key?
Was asking the same question. Install worked with one error message. The program works when I start it manually, but I cannot find a way to assign execution to a specific button press. Looking for ideas here.
Toby
i didnt link the button once i got the latest version installed and working. i jsut made a link and put it on the start menu instead and it works great that way
I've switched to 21725 and used aebutton plus to assign it to long press windows key, all works perfectly now.
I dont want to use aebutton plus, so I tried to use the old Long_Send.lnk and had no luck, am I doing something wrong?
or is it a diffrent name in 6.5
MSVC
I got that error too but it has stopped for some reason and now works well.
Version is v1.6.21040
I tried to upload a cab for you but it wouldn't upload.
I use MSVC for text to speech, to announce calls, read emails to me and announce calendar reminders.
This version won't read text msgs.
I don't use it for voice commands, Cyberon Voice Speed Dialer is much better for that.
mallman said:
When i try to run Voice Commander I get an out of memory error. I am running version 1.6.19209 Anyone else tried this or gotten it to work?
Click to expand...
Click to collapse
mallman said:
i didnt link the button once i got the latest version installed and working. i jsut made a link and put it on the start menu instead and it works great that way
Click to expand...
Click to collapse
WHICH LINK DID YOU USE, THE SHORT OR LONG ONE??
Thanks!
I got this error on the stock TP2 ROM as well. For me, it only occurred when I checked the box for announcing WMP selections.
Oh, regarding the MS Voice Command CAB, while it is not the reason the upload failed, XDA does not allow MSVC to be posted in CAB form since it can then be installed on devices that it is not licensed for.
MSVC cab
Oops!
Got it.
NotATreoFan said:
I got this error on the stock TP2 ROM as well. For me, it only occurred when I checked the box for announcing WMP selections.
Oh, regarding the MS Voice Command CAB, while it is not the reason the upload failed, XDA does not allow MSVC to be posted in CAB form since it can then be installed on devices that it is not licensed for.
Click to expand...
Click to collapse
So was anyone able to get MSVC running with a bluetooth headset??
I mean initiating MSVC commands via the headset button and also get the commands itself in the headset?
I cannot get it run like this.
bill340 said:
So was anyone able to get MSVC running with a bluetooth headset??
I mean initiating MSVC commands via the headset button and also get the commands itself in the headset?
I cannot get it run like this.
Click to expand...
Click to collapse
When I start MSVC, the command is repeated through the headset first time then it comes through phone speaker after that. Phone calls are directed through the headset ok. Strange.
I Think I've Found An Answer
If you go into the registry and go to:
\\HKLM\Software\OEM\VoiceCommand
and edit the value for VoiceCmdEnable to 1 (it was set to 0 on my HD2), then soft reset.
Now you should be able to get Voice Command working through BT, at least it's working for me at the moment.
It does not help fo rme at all...
No change!
Which version of MSVC do you use?
I'm not entirely sure, but in the Voice Command settings it shows v1.60.4622.0
weepatc said:
When I start MSVC, the command is repeated through the headset first time then it comes through phone speaker after that. Phone calls are directed through the headset ok. Strange.
Click to expand...
Click to collapse
In my case it is very similar, but when i activate voice command with the assigned button on my HD2 and not via the headset, everthing works as it should. Maby thats a indication how to get it worki`n the right way.
VoiceCommander Working
Hi,
Initially I couldnt get the BT to connect to VC (just got a BT disconnect beep in my ear).
Tried installing 2nd time (over the top), and seemed to 1/2 work but sometimes I would have to say name I wanting to dial through handset - then it would put call through BT - strange.
Finally, I noticed that if the BT headset was on when the phone was switched on (fluke that happened), it worked fine.
If the BT headset is switched on after the phone, it still plays up. Not tried turning BT on handset off and on whilst BT headset turned on yet - something to try tonight I guess.
Note : this only started working a day or so ago so not tested throughly yet.
My VC version is 1.6.4622.0.
I also noticed that on handango - a new VC version is available (updated 20/11/2009) which says works with Touch HD2 - but only USA voice at the mo so I'm waiting for the UK (hopefully released soon).
Hope the above helps.
Looks like I have an old version of Voice Command MSVC1.6.19214. How do I get a later version? Don't see why I should have to pay for it again when it is still 1.6.
Sorry, my bad - not working anymore. Worked for one day, then I get the same as everyone else