on 6.1 rom when I opened any videos after I exit the program backlight is not closed. Backlight is always opened. When I change "baclight time out" on settings menu backlight is closed for 30 seconds. How can I solve this problem?
Go here and you can find a fix for backlight problem.
http://maritime-billeder.dk/htc-vox.html
You will find a cab file in "Fixes for Windows mobile" that will turn off backlight after :15, 30, 45, 60, 90, 120 sec, so use the one you want.
Related
where can i dim the backlight? i'm searching for the backlight settings, but haven't found anything.
any reg tweak?
thx very much.
do u need to check some key register.....
i guess not. did some research, seems you can't set the backlight in any way.
poor, but true.
under power settings there is 'backlight off' and 'display off'.
i set the backlight off to quick (15secs) but display off to 2 minutes. The display is quite readable indoors with the backlight off (I suspect it is on a little - so the description in settings is not accurate).
Hopefully a firmware update will bring proper brightness control. Although I rememer my C500 and C550 not having it as well.
rgds
Im not sure if the hardware supports multiple levels for backlight.
I tried an app to test.(only tested on vda2 wm 5.0)
the only thing that happens is off or on.
but it works on ppc version!(didnt try on real ppc , but the emulator does switch light conditions! nothing happens on sp emulator)
no, unfortunately it's not supported.
big, big disadvantage!
Verify this Keyreg....and update on your SP.
HKEY_CURRENT_USER\Control Panel\Backlight\
- AcTimeout = 60
- AutoSensor = 1
- BatteryBacklight = 40
- BatteryTimeout = 15
- m_ACTimeout = 0
- m_BatteryTimeout = 0
Byeee
Sky_Lab
As we can see - default timeout value around 10 sec. But i can't find how to disable it.
Anybody can help me?
Changing registry keys:
HKCU\ControlPanel\Backlight\KeylightTimeout (default val. 15000)
HKCU\ControlPanel\Backlight\LightDetectOn (default val. 1000)
HKLM\Services\Keypad\DisableKeyLight (default val. 0) has no effect for me.
Did you just change it, or also soft-reset?
Of course soft-reset.
O2 one doesn't come with a D-pad light. Maan I wanna kill someone...
Amswer from htc.
"???????????????????????????????????? I have looked at the cruise and also i can not find anyway to deativate the lights on the keys, so there is no way to deativate them.Sorry about that."
Idots?
Another answer from HTC.
"I am very sorry for the delay. The answer to your question is you can adjust the backlight for the screen, but not the backlight for the keys. There is no update planned for this issue.
I hope this is an answer to your questions. "
I think - this is not true. You opinion?
Tytn 2
--------------------------------------------------------------------------------
hello
When i am have a phonecall the backlight goes off after ca 30 sec. IT DRIVERS ME CRAZY. I dont want that, i want it still on so i can chech kalender, other numbers, even make that choise 12345 that you have to do in some companychangees.
-is there a fix?
- som program that can handle this?
have you tried to adjust the "Turn off backlight if device is not used for" in settings?
don't tipple post the same question I removed the 2 other posts
as well, you could just give the phone screen a little flick in the dead space every minute to keep it on, if you don't wanna extend the default backlight of settings.
use shaps advanced config or i think kaiser tweak has the option to turn off fast sleep while in a call.
If you use S2U2, you can set it to prevent this, check the Tips link in my sig for the settings.
Hello,
since a few days I'm testing the new Mobile Shell 3. My first impression is very well. But one thing causes problems.
While I had installed Mobile Shell 2.x I was using S2U2 to make my device switch off.
S2U2 settings -> device switches off 10 sec after background-light turned off
WM6 power-settings -> background-light turns off after 15 sec - device switch off is not activated.
Everything worked fine... Background-light turns off after 15 sec. Further 10 sec later device switches completely off...
Now I've upgrated Mobile Shell 2 to version 3 but I've absolutely nothing changed on any settings - and suddenly S2U2 doesn't switch off my device any more...
My PPC turns off background-light after 10 sec (everything ok) - but S2U2 seems not to be able to switch off the device completely. Display is still on and shown darkly. But Touchscreen has turned off (doesn't react on finger-tapping).
When I close Mobile Shell everything works fine again.
So it seems that MS3 is blocking the suspend mode of some programs.
I think with Nitrogen (Mp3-player) it was nearly the same. In this prog does exist a suspend button but by tapping it only background-light switches off...
Anybody an idea or made same experiences?
Thank you
flahn
why don't you just change it in your setting of the battery in WM? I have a Lg ks20 and i change it there so after 1( sec he turns of the light) and after 3 minutes he switches off my phone. I also have spb mobile shell 3.0 and there are bugs in it atm.
Just click on your battery and go to the advanced tab.
Hope this helps you a bit
Switchke said:
why don't you just change it in your setting of the battery in WM? I have a Lg ks20 and i change it there so after 1( sec he turns of the light) and after 3 minutes he switches off my phone. I also have spb mobile shell 3.0 and there are bugs in it atm.
Just click on your battery and go to the advanced tab.
Hope this helps you a bit
Click to expand...
Click to collapse
Hello Switchke,
thanx for your answer.
My problem is a little bit complicated.
I'm using my KS20 in combination with the prog phoneAlarm. For me it's the only possibility to get the LED's of my KS20 turn on (if there is an new SMS for example) although it is in suspend-mode. Or do you know another way to make the LED's shine when device is turned off?
I got the same idea you described before. I changed the settings of power options in wm and deactivated s2u2. But it appeared a new problem.
If there is an unread SMS phoneAlarm is set to send every x seconds a signal for the LED to light it up. In older Mobile Shell 2.x or by turning off MS3 everything works fine - after 15 sec light turns off, after 1 min device switches off.
But by using MS3 the device every 10 sec after switching off turns on again (because of the signal of phoneAlarm I think). Problem only causes with MS3.
If I can't find a solution I will reinstall MS2 - the shining LED is very useful for me because I don't have to switch on device every time for looking after unread sms or new calls...
I put rotation in auto, press OK, quit config, re enter and rotation is always auto set to manual, it's like some program set it to manual ignoring the config of accelerometer, or maybe the register is corrupt? I don't think so, what's can I do?
can be the uninstalation of GAlarm?
I have SPB 3.1, the problem start aprox when I uninstal galarm, later insall SPB, then rotation and automute when turn down doens't work anymore