Does anyone else get this when they try and update their phone?
For some reason everytime i try to flash a new rom i keep getting this error.
icewhitenewyear said:
Does anyone else get this when they try and update their phone?
For some reason everytime i try to flash a new rom i keep getting this error.
Click to expand...
Click to collapse
I'm not sure on this error. Is it from the KaiserCustomRUU Application?
I;ve attached the one I use, just incase you need a different version.
If you still having problems, a little more info on what your doing at the time (and what you've done so far, Hard SPL, etc).
Thanks
Dave
I had this for a while and i thought it was a rom issue but all my older roms did it also.
you need to repair or reinstall active sync to fix it
icewhitenewyear said:
Does anyone else get this when they try and update their phone?
For some reason everytime i try to flash a new rom i keep getting this error.
Click to expand...
Click to collapse
I am having the same problem...I have the HardSPL flashed but when I try (and yes I tried the one that is attached to this post) and flash the ROM with the KaiserCustomerRUU exe. file it comes back "The update utility can not open the requested file. Please check your Update Utility".
How do I repair the active sync as it runs fine right now?
Do you have "Enable USB connections" checked?
Yep it's enabled and connected
volleykinginnc said:
I am having the same problem...I have the HardSPL flashed but when I try (and yes I tried the one that is attached to this post) and flash the ROM with the KaiserCustomerRUU exe. file it comes back "The update utility can not open the requested file. Please check your Update Utility".
How do I repair the active sync as it runs fine right now?
Click to expand...
Click to collapse
did you try just putting your phone into bootloader (hold down the camera button while soft resetting with the stylus) and flashing while in bootloader?
In Windows Task Manager, check and see if rapimgr.exe and wcescomm.exe is running. If either one of those are not running, then you will need to reboot the PC. Also, you can try another USB slot on the PC. Everytime this has happened to me, a reboot of the PC always fixed the issue.
P1Tater said:
In Windows Task Manager, check and see if rapimgr.exe and wcescomm.exe is running. If either one of those are not running, then you will need to reboot the PC. Also, you can try another USB slot on the PC. Everytime this has happened to me, a reboot of the PC always fixed the issue.
Click to expand...
Click to collapse
What is this "reboot" of which you speak, is that like power cycling...no wait that's just riding your bike really fast...
P1Tater said:
In Windows Task Manager, check and see if rapimgr.exe and wcescomm.exe is running. If either one of those are not running, then you will need to reboot the PC. Also, you can try another USB slot on the PC. Everytime this has happened to me, a reboot of the PC always fixed the issue.
Click to expand...
Click to collapse
Or in P1Tater's case your PC and phone might need a little oil.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AllTheWay said:
Or in P1Tater's case your PC and phone might need a little oil.
Click to expand...
Click to collapse
OOOOOHHHHH, It's on now.
Related
When i connect the Magician and try to update i get a 201 error.
I'm sure de device is connected because i can see this in the device manager. When i try this, i'm in the bootloader without a SD card. Can somebody please help me because i used the greek update and got the 15 sec reboot thing.
Ok. I now tried the MaUpgradeUt_NoID on several Rom's but then my update info fields are emplty (see picture)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I get this when i try to update in the bootloader (USB V1.00)
I realy don't know waht i'n doing wrong.
Ta wiz.
I will just stick with installing it as is then.
Folks, all I have done is:
1. Extract the finnish rom into a folder using winrar.
2. Copied MaUpgradeUt_NoID.exe into the folder.
3. Disabled USB in ActiveSync.
4. Run MaUpgradeUt_NoID.exe
5. Reset the iMate into Bootloader using Camera+Power buttons held with soft reset.
6. Connected the iMate with USB.
On the last stretch now so I will post results.
Regards...
NeungBoy said:
Ta wiz.
I will just stick with installing it as is then.
Folks, all I have done is:
1. Extract the finnish rom into a folder using winrar.
2. Copied MaUpgradeUt_NoID.exe into the folder.
3. Disabled USB in ActiveSync.
4. Run MaUpgradeUt_NoID.exe
5. Reset the iMate into Bootloader using Camera+Power buttons held with soft reset.
6. Connected the iMate with USB.
On the last stretch now so I will post results.
Regards...
Click to expand...
Click to collapse
This is exactly the way i'm doing it but i still get the empty fields like i posted.
Try restarting the PC!
i've read that for some people it solved this problem
I still got the same problems. If i use the original MaUpgradeUt i get the "error 201: get device data error" and if i use the MaUpgradeUt_NoID i get the empty version thing. Can somebody please help me? I even tried to upgrade with the SD method but only found the spanish ROM on the xda-delveloper FTP with no results. If somebody nows where to find the ROM mda_compact_upd_en_1.zip from the nowicom.com page, could you please let me know?
I'm realy out of ideas so if somebody got any.........
is there a posibility that I killed my bootloader? if zo, can somebody please tell me if I can fix it?
error 201: get device data error
I now tried the MaUpgradeUt_NoID on several Rom's but then my update info fields are emplty (see picture)
now i cant get flash in my imate jam plese some body tell me method how i flash and where i get stuff for it
my email
[email protected]
I'm a newbie trying to find the perfect ROM on a HTC Touch Diamond, I've followed the instructions posted here: http://forum.xda-developers.com/showthread.php?t=416211, and managed to install this ROM provided by Energyrom: EnergyROM_21864_DIAMOND_10.Nov.2009_StandardM2.5.
I'd like to install a lighter ROM that is as close to the standard HTC/ WM 6.5 as possible and am looking for recommendations. But first I need to remove the Energyrom and have no idea how to do this? Activesync works intermittently if I wipe the device, and set the activesync settings to not seek permission, and remove all partnershps from my PC. But as soon as I try to run the RomUpdate Utility it fails to run because off a bad connection with the phone. Then the Windows Mobility Centre just shows an error and I have to go through the process all over.
Any help much appreciated
Welcome to forums
No need to remove the ROM, when you find the new ROM you want to flash just flash it and that´s all!
Thanks Orb.. ...however..
...The real problem is the ActiveSync. Once I have used the 'wipe device' control in the settings, and removed previous partnerships, I can connect the phone via Active sync. However, by the time the Rom Update Utility is running it appears that the connection is dropped, the Rom Update Utility cant communicate with the phone and then when I reconnect I just get an Error Icon in Windows Mobile Device Centre. This is preventing me from overwiritng with a new ROM.
I would perform a hard reset instead wipe device option.
Instructions here:
http://wiki.xda-developers.com/index.php?pagename=Diamond_HardReset
Try after HR and most likely should work, then you can change ROM
Still no luck...
Thanks ORB, but this still does't work, the phone is connected through activesync but all rom update utilities just stop with an Error 224
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is sooo frustrating - is there any way to fix the activesync, or some way of removing/ replacing energyRom, even getting the phone back to HTC standard would be better than the current state.
thnx
Flash from internal storage
Howdy,
Not sure I'd blame the rom, more likely a USB problem or activesync has always seemed flaky. Anyway do the flash from the device.. Copy about any ROM file to root of the internal storage area (either in storage mode or try active sync but it's slower & seems you're having issues) but name it DIAMIMG.nbh then reset your phone while holding down VOLUME DOWN & BACK buttons and you'll get the upgrade menu where it should tell you it found an OS rom & it's ready & you just press POWER button to start the process, resetting it when it says it's completed successfully.. That has been pretty much the way I've updated roms on the Diamond for a long time now (Really handy to have a few roms on there & just rename when you want to flash it..) & seems MUCH faster & much more reliable & should solve your problem.
Hope that helps.
Bill
Hi, i got this Samsung G S 4g. I was supposed to fix the rom (somewhat unstable thing). I will try to write all the things i have done until now. I got the "phone to pc" icon. I cannot boot or use download mode (the triangule thing)
General Info
Device is rooted. T-mobile branded, carrier-locked.
Froyo rom. (i think is stock but rooted).
Somewhat old device.
Had stock recovery (Android recovery e3 o something like that)
SGH-T959V (KB5)
Things i did
1. Pull some files from device, to sim-unlock. (using ADB) DID not modify anything else
2. SIM-Unlock using code (worked)
Then, device worked ok some weeks... then stopped working, contacts and phone apps crashed suddenly, everytime i open them
4. Use lastest Heimdall and this guide to get CWM on the phone. The idea was to flash the kernel. did not work. Check the part called "How To Flash a Kernel with Heimdall".
I did that. NOTE: used this kernel insted of the "old" one that the guide says.
Then it output this error: "libusb error: -12". So Heimdall didn't detect the device so i used zadig.exe after reinstalling the samsung drivers to avoid this issue. Then, it started working, and output something like this: "failed sending file part packet heimdall"
And now i have this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What you have is an alternate form of DL mode that occurs after a failed flash. Read this to get back up and running.
Lumins Guide
Or just reboot the phone, it should go to a disturbing looking tiny-phone mode. Then just resend your heimdall command and it should happily work.
Major kudos to diego930 for such a nicely detailed description of his problem!
Yes... my computer didn't feel like showing the tiny disturbing phone this morning, else I could have skipped the suggestion to reboot.
That just means that the safeties are off and your phone is ready and waiting to get flashed. You're close... and probably got fixed, based on the thanks provided.
Theraze said:
Or just reboot the phone, it should go to a disturbing looking tiny-phone mode. Then just resend your heimdall command and it should happily work.
Click to expand...
Click to collapse
How i do reboot ? I just get the phone to pc icon everytime lol
jeffsf said:
Major kudos to diego930 for such a nicely detailed description of his problem!
Click to expand...
Click to collapse
Thanks I like making myself very clear (and i know how annoying is the lack of info)
I haven't touch the device since i broke it so i'm going to try that guide and post any news. Thanks all!
When you get that phone to pc icon, just use Heimdall to flash again.
The reboot-step is from official-download mode where it has the big yellow caution taking you to panic-download mode where it has the tiny phone you posted in #1. Once you have panic-download mode, your phone is ready to accept anything. Even whatever failed before.
Summary: Repeat OP Step 4.
ok, done. Fix using heimdall 1 click! I just reflash GB with kernels and bootloaders, now it works flawless.
Thanks Theraze.
Hay. This is my first post in xda and i don't speak english.
I have chuwi vi7 and windows 7 but i can't flash the tablet.
When I connect chuwi with PC appear 3 new cdc serial and 1 adb.
After installed many driver apper this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I take FlashTool_E2 from this
r_e_n_e said:
I left dummy IMEI. I used this one ROM from
Code:
https://yadi.sk/d/BFxcO0briMMyi
Flashed and WiFi works!!! So everything was wrong ROM!!!
Click to expand...
Click to collapse
and the firmware from this
stegg said:
a new firmware has been released
Code:
https://yadi.sk/d/6boIFS_-jsLkm
it should solve the random-freeze deep sleep problem
I flashed it with instructions in first post and everything was OK, i didn't loose imei :good:
Click to expand...
Click to collapse
When I start FlashTool_E2 the corner left-bottom is pink!?!?!
If I start the "usb map wizard" don't finds any connection.
If I do "start" and clik on "USB1" it give me
An EBL must be injected. None was found in the downloaded file.
For some systems there must be an injected EBL. The file specified for download does not contain an injected EBL.
Check that the file is correct for the target. This error can also occur on a normal boot time out, in which case just try again.
Click to expand...
Click to collapse
and if clik on "USB4" it give me
Error during boot
An error happened during the boot sequence.
This could be physical transmission error. Check connection and COM port and try again. If the error persists contact the developer.
Click to expand...
Click to collapse
Could someone help me please?
Sorry for my english.
Adijazz1706 said:
Tablet off, then press start usb1 before connecting phablet. after pressing, quickly connect tablet and hold vol-. If not work, try vol+ or power button. Keep trying.
Click to expand...
Click to collapse
Vary vary good. All Ok. It was vol+. Transmission ok. Upgrade ok. Imei ok.
Tanks a lot.
I have two Vi7 tablets and after firmware update they both have the same MAC address 0a:0b:ad:0d:00:d8 and cant be used on network at the same time.
Any solution to be able to change MAC address on either of the tablets ?
Hello
I think I read everything what was written on this forum about flashing Vi7 but I still have a problem. I can not find an apropriate drivers for CDC, and even Intel(R) USB flash loader doesn't work correctly.
Could you help me? Is there anybody who has a package of driveres for win7 64 bit?
The driver
Can you please give me the driver link for CDC?
on the device manager I have:
one port as "Android device" -> "android bootloader interface"
after i install the ADB installer from here http://forum.xda-developers.com/showthread.php?t=2588979
(the fastboot doesen't work for me...)
but the other 3 ports are ander the "Other Devices" and no driver...
Can you please give me the drivers for the rest. and explain?!
Thanks
Hi everyone. Could someone please direct me to a guide for going back to the stock firmware? I have been looking everywhere with no luck at all.
Thanks!
Jonny_Bandana said:
Hi everyone. Could someone please direct me to a guide for going back to the stock firmware? I have been looking everywhere with no luck at all.
Thanks!
Click to expand...
Click to collapse
https://c.mi.com/oc/miuidownload/detail?guide=2
This page doesn't like playing with mobile browsers, so if you've got a blank page change the browser to desktop mode.
All required downloads are in the guide.
The Mi Flash Tool will lock the bootloader, by default, after flashing. If you don't want to do this, then change the option at the bottom of the tool before flashing (step 5)
If you wish to lock the bootloader, you must make sure the ROM region matches the phone, i.e. global ROM on a global phone.
Robbo.5000 said:
https://c.mi.com/oc/miuidownload/detail?guide=2
This page doesn't like playing with mobile browsers, so if you've got a blank page change the browser to desktop mode.
All required downloads are in the guide.
The Mi Flash Tool will lock the bootloader, by default, after flashing. If you don't want to do this, then change the option at the bottom of the tool before flashing (step 5)
If you wish to lock the bootloader, you must make sure the ROM region matches the phone, i.e. global ROM on a global phone.
Click to expand...
Click to collapse
Thanks!
However, I'm having a lot of trouble with the tool. It will not recognize my phone. I connect it, and the computer detects the phone. Then I click on "refresh" on the tool, and automatically the USB device is disconnected from the computer and the tool will not recognize it.
I have installed the Qualcomm and ADB drivers, rebooted and nothing changes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, after hitting refresh (device still connected on Fastboot):
Any ideas?
Thanks again
Sounds like a dodgy USB connection.
Try using the best USB cable you can find. If that doesn't work, try using a different computer. Fastboot and adb are very sensitive to the quality of the USB connection.
My old laptop will happily connect normally to my phone and I can transfer files with no issues, but from about a year ago I can no longer use adb and fastboot, with similar problems you are seeing. Using the same phone and cable I have no issues with my wife's laptop.
Robbo.5000 said:
Sounds like a dodgy USB connection.
Try using the best USB cable you can find. If that doesn't work, try using a different computer. Fastboot and adb are very sensitive to the quality of the USB connection.
My old laptop will happily connect normally to my phone and I can transfer files with no issues, but from about a year ago I can no longer use adb and fastboot, with similar problems you are seeing. Using the same phone and cable I have no issues with my wife's laptop.
Click to expand...
Click to collapse
That actually worked. Phone is flashed. Thanks a lot friend.