Double ROM startup screen - 8125, K-JAM, P4300, MDA Vario ROM Development

Ok so I flashed the TNT rom a few days ago, I liked it but I wanted to try the other roms too,
So Today I flashed Slim 4.0 Diamond Project ROM and it works ok for 2 minor problems.
1) After flashing I see the TNT startup screen, then the Diamond Startup screen.... anyway I can fix that
2) In the Slim 4.0 ROM, the titlebar disappears so I can't click start or click on the X to close programs...
Any Ideas?
IPL 1.08
SPL 1.08
And I'm using Tmobile MDA G3

It is because the Slim 4.0 does not have its own boot splash, so the TNT splash stays.
To replace the splash, download a splash RUU in this forum and flash it.
btw, it is recommended to use IPL and SPL at least 2.0 to use WM6.1 ROMs.

Related

New BETA ROM: RUU-Prophet-AKU2.3-2.20-2.47.21-Jester-b3

Hi,
I've created another BETA ROM for the Prophet
This ROM will upgrade your SPL to 2.20.000 (Only G3 !)
This ROM will upgrade your Radio to 02.47.21
This ROM contains the stripped PDAMobiz Final AKU 2.3 OS
This ROM contains the stripped Qtek ExtRom (2.20.7.114)
This ROM has a changed CID (now 11111111) (This needs testing on G4)
This ROM has a standard page pool of 12MB
I've taken the base Qtek 2.20 OS and incorporated the AKU 2.3 files from the PDAMobiz OS, however, I've removed all the extra "junk" so this is a pretty clean ROM.
The ExtRom base came from the Qtek 2.20 ROM, however, it has the qtek links/images removed.
For the dutch users, i've patched this ROM so it doesn't change "wel" into "we'll" when you create an SMS
My ExtRom:
A2DP_Patch.cab
AutoRun.exe
Cert_SPCS.CAB
Config.txt
MP_Customization_Prophet_Qtek_WWE_051205.CAB
MP_CVSDcpl_20060220.cab
MP_mHub_WWE_060124-2.CAB
MP_MMSAutoDisconnect_060106.CAB
MP_SmartDialing_enable_0915_signed.CAB
MP-Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB
P_ECall_112_911_QTEK_Wizard.cab
P_PT_EnableSPN_Wizard_20060109.CAB
PP_DisconnectButton_16.CAB
PP_ExtVersion.CAB
PP_OperatorName.CAB
PP_Prophet-UAProf_AKU2.sa.CAB
Signed_A2DP_Cert.cab
What was changed over beta 2 you ask ?
well, I've ripped more crap out of the ROM and changed the stylus gif mentioned by lvsw.
Also, I've changed the G4 version, it does NOT include any SPL, hopefully this will make the ROM upgrade work (test this !)
Just download, run the file and after the upgrade is done, hard reset your Prophet (hold down both the camera and comm manager buttons on the side while pressing the reset button, hold the two buttons untill the screen comes up, then press the left green phone button)
As this is a BETA, please report any errors here, thanks
For G3 ONLY:
Removed, working on new version
For G4 ONLY:
Removed, working on new version
when i update, my xda neo doesn't start. it just shows the bootscreen with the 3 colors.
DocMAX said:
when i update, my xda neo doesn't start. it just shows the bootscreen with the 3 colors.
Click to expand...
Click to collapse
On G4 not working "ship-updater" with "mod-OS"!
Work only PDAmobiz updater
Jesterz, please, in extrom add MP_MMS-patch (patch for activation menu "MMS-config"). I can give you this cab!
lvsw said:
On G4 not working "ship-updater" with "mod-OS"!
Work only PDAmobiz updater
Jesterz, please, in extrom add MP_MMS-patch (patch for activation menu "MMS-config"). I can give you this cab!
Click to expand...
Click to collapse
Ok, thanks, I will repacked the G4 version.
I will check the MMS patch. anc create beta 4...
DocMAX said:
when i update, my xda neo doesn't start. it just shows the bootscreen with the 3 colors.
Click to expand...
Click to collapse
if your prophet is G4, try to fix the rom you want to upgrade with tool calls typho5 (same to Wizard G4). i've fixed already by that way. or email me ([email protected]) to get the rom i used
boongdang said:
if your prophet is G4, try to fix the rom you want to upgrade with tool calls typho5 (same to Wizard G4). i've fixed already by that way. or email me ([email protected]) to get the rom i used
Click to expand...
Click to collapse
Can you share what you did to get this ROM working please ?
I don't have a G4 so I can't test my ROMs on it
Thanks !
Jesterz said:
Ok, thanks, I will repacked the G4 version.
I will check the MMS patch. anc create beta 4...
Click to expand...
Click to collapse
Look attach
lvsw said:
Look attach
Click to expand...
Click to collapse
I got it already,but spasiba !
Beta 4 almost ready.
jester, would you say this version is better than RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-b1.exe?
Stuck at bootup screen
I updated to this ROM, now my device is stucked at splash screen. The one that says..IPL 2.09, SPL 2.20.0000 , GSM 02.47.21
What do I do now? I tried hard resetting it but it gets stuck on the same screen. The upgrade went OK (100% with congrats..) How can I reverse to or update to another ROM if it can't establish a sync?
Thanks.
Tried it and didnt like it, still too much of PDAmobiz custom stuff around. Like doesnt delete cabs after install, has the gPS icon in settings, doesnt automatically bring up the keyboard when input is needed and some other nasty bits.
why cant they just give us an updated clean rom instead of trying to make things better.
Back to jesters awesome 2.2 rom.
download file?
Where is the link to download this file?

HELP. Brick after Crossbow Most Beautiful Edition

Hello all,
i have installed Windows Mobile Crossbow Most Beautiful Edition and every thing wenk ok during the installation but now after i finished flashing the ROM i am stuck on the splash screen and my wizard keeps reseting and fails to pass the splash screen.
i have tried to reflash another ROM but i can't even start the bootloader (3 colors screen)
pleaes, what shall i do?
you already tried holding down the camera button and pressing the power button?
ammar said:
Hello all,
i have installed Windows Mobile Crossbow Most Beautiful Edition and every thing wenk ok during the installation but now after i finished flashing the ROM i am stuck on the splash screen and my wizard keeps reseting and fails to pass the splash screen.
i have tried to reflash another ROM but i can't even start the bootloader (3 colors screen)
pleaes, what shall i do?
Click to expand...
Click to collapse
downgrade to this ROM :
http://rapidshare.com/files/18711114/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
this is the way to solve the problem and then after downgrading to this ROM u can the unlock and then install any other ROM but u must first downgrade to this ROM downlaod it from the link above
Perhaps the best way to restore your device its using the Love Rom.
Flash, and flash again the WM6 ROM, follow the Shell Tool method closely and you will have your device working in no time.
It worth the pain, believe me
Hi,
Thanks you all for your help
i have used the camera button and the stylus to get it into the boot loader and then i reflashed my original k-Jam rom with IPL/SPL 2.16 then i flashed again crossbow ROM and it worked.
it seems that after CID unloking i had IPL/SPL 1.01 and i should have reflash a ROM with higher IPL/SPL before WM6. so the idea is to get a stable ROM with SPL 2.26 like everybody here is doing but i tried my 2.16 and it is ok now.
Regards.
golfernutnflorida said:
What rom is that you are referring to? Is that the Button rom or the Wizard Love Rom?
Click to expand...
Click to collapse
that is the orignal first ROM for Wizard that came out first from the factory with this ROM THIS is the first ROM for wizard i mean the oldest one !!
QUICK FIX for WM6 Won't Boot/Resetting Problem
I've had the problem mentioned in this thread every time I've loaded a WM6 rom. Last summer, I fell in the lake with my wizard so I've always attributed weird problems to the water exposure.
Anyway, when your rom won't boot. Here's a trick that works for me. Do a soft reset, then as soon as you get into the green screen with the spiral, open your keyboard and hold down the space bar. My rom has ALWAYS booted when I do this.
I got the idea from and old PC repair trick. Good luck.
Always upgrade to a 2.xx original ROM before upgrade further. I always use the T-Mobile 2.26 ROM.

why can't i flash any NBD roms?

i have a G4 IPS/SPL 2.25.0001 and i follow all of mun's steps to flash roms and everything usually works fine, i installed the windows titanium rom last night and was loving it but whenever i try to install NBD's roms everything goes fine with the shelltool and when i do a hard reset it freezes at the cingular screen that displays the IPL/GSM info, it's done this three times in a row with 3 different versions of NBD's roms
i'll flash back to titanium but what could be the cause of this?
any help would be appreciated
on my cidlocked g4 whenever i shelltooled NBD from a cingular base rom it would always get stuck at the cingular boot screen. Only way i can get NBD to run is to use shelltools over the wizardlove rom.
pr0naLd said:
on my cidlocked g4 whenever i shelltooled NBD from a cingular base rom it would always get stuck at the cingular boot screen. Only way i can get NBD to run is to use shelltools over the wizardlove rom.
Click to expand...
Click to collapse
i tried from a windows titanium rom and the cingular manufacturer rom, i'll try the wizardlove rom thank you
if anybody feels like answering: why does this make a difference?
yep that did it, the NBD rom worked after i flashed wizardlove first
weird
Wizardloverom is an amazing piece of engineering. Ask anyone how they "saved" their wizard.. 9 times outta 10, wizardloverom.
How long does it take, on average, for you guys to flash the NBD rom? WizardLove almost always goes on in about 8 minutes, but NBD just sits there indefinitely, and I'm dubious about doing a Hard-Reset without confirmation that the flashing procedure is finished.
Yes, it is confirmed that sometimes shelltool doesn't report on flash complete.
Just doing a hard reset after waiting is fine.

Tilt stuck on bootloader/SPL after Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700

I'm currently stuck on the SPL/bootloader/tri-color screen on my ATT Tilt. I've read the threads and postings on how to recover, but I do not see a situation like mine.
I've been using Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 about 4 months now since May 07. It's been working just fine, but up until a couple of days ago the phone does not power up when pressing the power button. I have to connect it to a power source, then the phone will power up to the SPL. I HardSPL'd originally and then flashed with Dutty's ROM. I have no explanation why it is stuck in SPL.
I tried to re-flash Dutty's ROM. it goes to 100% and the flash app tells me it's finished. I try to restart the Tilt, but same old SPL screen. Should I try to flash OEM ROM?
It would appear to me that ANY ROM is better than no ROM. Try another ROM, then if you like Dutty's, flash Dutty's after you get the phone working with the new ROM. It's what I would do. BTW, this really should be put in Dutty's Thread with the ROM you're referring to.
Here
http://forum.xda-developers.com/showthread.php?t=388947

Fuze freezes after soft reset - couple days after flash?

My fuze is freezing after a soft reset, and the only solution I have found is to hard reset.
I recently flashed hard-spl and my first cooked ROM. A few days later this happened. It freezes just after the animation sequence. I hard reset the phone, set it all up again, couple days later - frozen again. Tried a different ROM, loaded fine, set it all up, couple days later - frozen. Tried a 3rd ROM, same thing.
I was running the stock at&t fuze ROM up until this with no issues. I have tried 2 different versions of the Energy ROM 2.0 and once with Shep's 6.5 ROM.
I'm getting pretty sick of setting this thing up. Any ideas, maybe a bad hard-spl flash?
I had the same problem before, i fixed it with flashing back stock rom, reflash hard-spl and trying a diffrent build of my favorite rom, and to be honest i have no idea what fixed it.
Ok thanks for the reply. I am going to try a reflash of the hard spl, and a new ROM. Something makes me think the hard spl is the problem, but a new ROM can't hurt at this point. I will post my results...... in a few days. Thanks again!
Having almost the same problem. Where exactly was it stopping?
I get the first splash-screen, afterward in the lower right corner the 3 red version numbers appear and nothing happens, i dont get to the second (animated) splashscreen, nor to the windows mobile one.
More info:
Stock Rom
--> flashed HardSPL
--> flashed PdaViet V11
--> months later V15
--> weeks later WM 6.5 Testrom, disappointed --> flashed ProvenRom 3.3
--> trouble began approx. 3 days later
--> reflashed ProvenRom 3.3
--> trouble started again, then i did a hard reset for the first time
i will try reflashing stock rom, then hardspl, than custom rom and report in a couple of days
same thing happened to my htc touch pro. i havent fixed it yet
Happened again. I had reflashed the hard-spl and then a new version of the energyROM. It froze up later that night. Iam getting the first splash, with the red numbers, romversion etc., then the animation plays, the it freezes at the end of it. I guess I will try to flash back to stock ROM and see what happens. Until someone has a fix, I guess it'll be trial and error. I'll keep you posted.
And again, twice.
I thought everything was fine, workin good for a couple of days, then it froze again. Any thoughts or further suggestions would be highly appreciated.
Seems like it happens while I am setting things up, phone starts to get laggy after a soft reset, after adding a cab that requires a soft reset. Then it freezes on the next reset.
Software Version
I think we should narrow this down by comparing the software versions.
I'll start:
Radio: 1.14.25.05
Rom: Proven 3.2, 5.07.831.17 build 5.2.21042.1.6.1
HardSPL by Olinex
now you go!
addition:
i also remember, this happened after a cab-install. Do you remember WHAT you actually tried to install? I think for me it was HomeScreenPlusPlus UI. Afterwards it was always Opera that stopped responding and i had to soft-reset --> total failure
I had the exact same problem...you can see it in the DaG 6.5 Kitchen thread. I tried flashing to a known custom Rom that I know worked and it still had the same issue. I fixed it with the advice of someone there, the same advice that's here. Flash a stock rom, hard reset....then flash a custom rom. I don't know why that fixed it but it did.
Hmmm, maybe this will work. I had tried that and it did seem to work. However, after a few days I got sick of the 6.5 and flashed back to the energyROM. So I will give this fix another shot.
In regards to the previous post here's what I am running:
radio: 1.12.25.19
Rom: EnergyROM 2.0 build 41609
Hard SPL - SPL-1.90.by Olinex
Its almost becoming funny now. I did a soft reset so I could see the radio version and guess what - it froze again.
It seems like if I don't set everything up, it will last a few days, but sooner or later I get fed up with not having progs installed etc. and after I set it up - poof!
So here is a list of cabs and general things i do to setup the phone.
Hard reset - reset at screen setup - ROM intitial setup - device reboots itself-
-PPCPIMBackup (installed on ROM, just restore contacts)
-ChangeScreen or Gyrator / have tried both individually, not at the same time
-DredSensor
-KforTouchPro
-HTCWeathermaster Rhodium
-Gscroll 2.0 (beta)
maybe something else I haven't installed every time
of course, set owner name, setup e-mail, the rhodium world clock bug setup, general tf3d setup (contacts, weather, tabs etc.)
Add shortcuts from my sd card for previously installed progs.
I'm not sure that any of these are the issue. I have done this at least ten times. Each time I have noticed which was the last cab installed then freeze, I try not to install that cab, then it will still freeze, eventually.
I am going to reflash the stock ROM and stock SPL, then hard SPL and a ROM flash. I'll be sure to post my results.
i tried latest mystic 6.5 rom lite beta 1.1 and it froze within a day at the second splash screen and after about 1-2 min the screen turned white. I have tried the battery removing trick, but same results. I'm not sure what apps i have installed after hard reset...
i tried latest romeos rom 6.1 randium edition: it got frozen after some time...
same with both NRGZ roms: 1 and 2 version (standard raphael manila and rhodium manila).
Now i'm using romeos wm6.5 rom 2.101... will post if it freezes...
i havent tried this: "reflash the stock ROM and stock SPL, then hard SPL and a ROM flash" yet...
at10ti0n said:
Now i'm using romeos wm6.5 rom 2.101... will post if it freezes...
i havent tried this: "reflash the stock ROM and stock SPL, then hard SPL and a ROM flash" yet...
Click to expand...
Click to collapse
I had no luck with this solution, and it is not exactly what was described.
Actually the solution posted is to just flash stock rom, hard reset, then flash custom rom.
I tried the above solution and it still froze, now I am going to try the correct solution posted and see what happens.
Frozen again... I am going to flash back to stock rom, stock spl, see if it still freezes.
This works (for me)
Running fine for a week:
- Flashed stock ROM (O2 German). This replaces the radio and the OS
- Went back to stock SPL. THIS IS TRICKY, SO READ(!):
+ Olinex HardSPL will NOT let you flash back to your StockSPL, because it is write-protected. This kept me up quite some time.
+ Flash your Stock ROM
+ Then, flash the hacked 195 SPL mentioned HERE: http://forum.xda-developers.com/showthread.php?t=502720
+ then, flash your Stock SPL. Read the Threads: http://forum.xda-developers.com/showthread.php?t=410150
+ Make sure, your SPL is neither Olinex, nor the hacked 195 in the third picture
+ I flashed the Stock ROM again just to be sure the stock SPL runs and allows your stock ROM to run.
- Flashed HardSPL
- Flashed Energy ROM 2.0 WITHOUT Manila, flashed latest Radio, installed cabbed Rilphone.dll
Installed Resco, Resco Today, MortPlayer - this is the SAME setup that got me caught the last time and now runs fine for a week.
This works for me. I presume some ppl get the stock SPL flashing wrong.
As i can read from other roms, it happens ONLY to Roms with the new rhodium manila,
so maybe, if you're tired of reflashing and hard reset, try one without the new manila interface.
Another suggestion: I have a different Opera now. Many describe they tried to start Opera, THEN it hangs and the phone gets stuck on bootscreen. I have 9.5 Build 15613 now and this one runs fine.
I encourage you to try energy ROM 2.0 without Manila. There seems to be a battery issue and someone uploaded a version with better battery life, you may try this, but i don't find the post anymore and this may have rhodium manila included. Energy ROM 3.0 is out now netherless, maybe someone can follow my instructions and try this with 3.0.
Hope i could help, this was bugging me SO LONG
Wow, thanks!
I have been running the stock at&t rom since my last post with no freezing. I will try this step for step, and I will try energyrom 3.0 just to let you know.
Wish me luck!
Well, I was able to get the stock SPL back, just as you described. Thanks again for the info.
However, I flashed EnergyROM3.0 and it froze after a few hours. Of course that rom has the rhodium manila cooked in, so I am going to try again with another rom. I will report back later.
from my last post i have been using romeos wm6.5 v2.101 with no freezing.. it has NO manila cooked in.
I think, maybe it has something to do with manila :-?
Same problems here as described. Using:
1.14.25.05 Radio
EnergyROM 3.0 WM6.5 50409a version
Started after flashing the WM6.5, reproduced easily after 1-2 hr of ROM on phone, it freezes (either by installing something, or Manila general use) then stays on information screen of versions.
Going to try stock ROM + reflash SPL then flash EnergyROM 3.0 again. If that wont work, i go back to 2.0 which worked well.
OK guys I am going to report this issue has been fixed (though not solved) for me.
I flashed ROMeOS wm6.5 v2101 and am also running the version of opera previously posted. I have been running for almost a week with no freezing, and (knock on wood) do not expect it to.
I am very happy with this rom and don't plan on flashing again for a while. However, if I do I will report any success/failure. I am curious to know if the problem is just certain roms, or something specific in them. If anyone else having these issues would care to post their results with other roms, it would be appreciated for the sake of the community.
I also wanted to note that I flashed the RRE wm6.5 non-manila version just before this and it did freeze on me. So it may not be related to the rhodium manila.
Anyways thanks again to all who posted and helped with this. I can't tell you how happy I am to have stable phone again!
Good luck and happy flashing!
same thing happened to my htc touch pro. i havent fixed it yet

Categories

Resources