You may think there are so many cases for the MDA Compact IV touch diamond but i am looking for the original carry pouch for the MDA, as i missed placed the one i got, is there anyone that wants to sell theres. None of the suppliers stock it for some reason.
Having seen the carry pouch supplied with the MDA, I think you'll probably be offered loads.... its horrible, and more than a bit, err, girly.
My sister wants the phone so i can get the touch pro so the pouch be perfect for her and it go well with her ipod sock, dont ask
Hey, I think i've still got mine somewhere if your still after one
Damian
MDA IV Case
I still have mine new in condition if you want it. Pay for shipping and it is yours for free. [email protected]
I've looked everywhere, but can't find a decent carkit/active-holder for my MDA Compact IV.
I've tried the 'Brodit Active Holder for the Touch Diamond', but it doesn't fit due to the rounded corners.
Is there an active-holder for the MDA Compact IV?
Hope so...
tim_allewijn said:
I've looked everywhere, but can't find a decent carkit/active-holder for my MDA Compact IV.
I've tried the 'Brodit Active Holder for the Touch Diamond', but it doesn't fit due to the rounded corners.
Is there an active-holder for the MDA Compact IV?
Hope so...
Click to expand...
Click to collapse
That's interesting and helpful. www.brodit.com certainly reckon they have an active kit for T-Mobile Compact IV, but after your post I checked to see if this was a different part No from HTC Diamond, and sadly it was not.
I was just about to order one too. Does it just not fit well, or not at all?
EDIT
Hang on a minute, what exactly are you saying.
On inspection of the part number 968843 or 971843 I can't for the life of me understand how the rounded corners would make any difference.
From their website
Item no. 968843 fits:
HTC P3700 For all countries
HTC Touch Diamond For all countries
O2 XDA Diamond For all countries
O2 XDA Ignito For all countries
T-Mobile MDA Compact IV For Europe
Some more feedback from you would be really helpful
Lyrrad said:
That's interesting and helpful. www.brodit.se certainly reckon they have an active kit for T-Mobile Compact IV, but after your post I checked to see if this was a different part No from HTC Diamond, and sadly it was not.
I was just about to order one too. Does it just not fit well, or not at all?
Click to expand...
Click to collapse
Not at all! The salesman (at the pdashop.nl in The Netherlands) tried to place my MDA Compact IV into the Brodit active holder, but it wouldn't fit at all...
I hope there are other active holders for the MDA Compact IV...
Maybe CARCOMM or ADAPT active holders
tim_allewijn said:
Not at all! The salesman (at the pdashop.nl in The Netherlands) tried to place my MDA Compact IV into the Brodit active holder, but it wouldn't fit at all...
I hope there are other active holders for the MDA Compact IV...
Maybe CARCOMM or ADAPT active holders
Click to expand...
Click to collapse
I'm not looking for an argument here, and I fully understand that you went to pdashop.nl and the salesman could not get the Compact IV to fit, but is there the slightest chance that the salesman did not have the diamond/compact IV active holder (in other words the htc diamond would not have fitted either.).
I understand that the compact iv has rounded edges, but I believe the USB terminal is in the same place. I also believe that they are the same thickness and width. The design of the Brodit (of course I'm just looking at a web picture) does not indicate that rounded corners could cause the problem.
I have not compared diamond to compact iv side by side, but in your opinion where was the problem. I can only think it must be the side holders.
Lyrrad said:
I'm not looking for an argument here, and I fully understand that you went to pdashop.nl and the salesman could not get the Compact IV to fit, but is there the slightest chance that the salesman did not have the diamond/compact IV active holder (in other words the htc diamond would not have fitted either.).
I understand that the compact iv has rounded edges, but I believe the USB terminal is in the same place. I also believe that they are the same thickness and width. The design of the Brodit (of course I'm just looking at a web picture) does not indicate that rounded corners could cause the problem.
I have not compared diamond to compact iv side by side, but in your opinion where was the problem. I can only think it must be the side holders.
Click to expand...
Click to collapse
On the box, I saw that the brodit holder was for the Touch Diamond, there was also a dummy of the Touch Diamond in that store, and I held my MDA Compact IV next to it. The back is so much different. Everything on the Compact IV is rounded and maybe just a little thicker...
From the specs
TM Compact IV 101 x 52 x 12
HTC Diamond 102 x 51 x 11
I have spoken to the following company in the UK
http://www.dsldevelopments.com
They assure me that the HTC Diamond brodit kit is fine for the TMobile Compact IV. They actually fit a comparable phones into the cradle prior to offering the unit on their website.
I mentioned your issue and they said that normally when this kind of thing happens, one would find that the unit itself was faulty. Apparently the cradle itself is hand finished [his words not mine] and sometimes a rogue unit can be manufactured. So his belief is that the diamond would also not fit into that actual unit.
From the specs on the previous post I would be almost certain that a tolerance of 1mm would not be the issue.
Anyway, the company above do export,and the cost of a telephone conversation should not be too expensive. Call and speak with a guy called Dave or Alan (sorry I can't remember).
However I suggest you go back to pdashop.nl and try another unit.
Hope this matter will be resolved. I can't quite make up my mind which fixture to choose yet, so I am not in a position to order.
However if mine does not fit, I have been promised full refund.
Lyrrad said:
I have spoken to the following company in the UK
http://www.dsldevelopments.com
They assure me that the HTC Diamond brodit kit is fine for the TMobile Compact IV. They actually fit a comparable phones into the cradle prior to offering the unit on their website.
I mentioned your issue and they said that normally when this kind of thing happens, one would find that the unit itself was faulty. Apparently the cradle itself is hand finished [his words not mine] and sometimes a rogue unit can be manufactured. So his belief is that the diamond would also not fit into that actual unit.
From the specs on the previous post I would be almost certain that a tolerance of 1mm would not be the issue.
Anyway, the company above do export,and the cost of a telephone conversation should not be too expensive. Call and speak with a guy called Dave or Alan (sorry I can't remember).
However I suggest you go back to pdashop.nl and try another unit.
Hope this matter will be resolved. I can't quite make up my mind which fixture to choose yet, so I am not in a position to order.
However if mine does not fit, I have been promised full refund.
Click to expand...
Click to collapse
THANKS a lot!
I will go back to the pdashop.nl to try other active Brodit holders and let you all know the results!
anyone know a cheap site to get these from? i priced it up and it's gonna be like £45 with the car mount also, and this was from http://www.dsldevelopments.com
I ordered the Brodit proclip from Morpethmobiles for £14.95 delivered and the Brodit passive holder from www.qfonic.com for £16.95, both prices included delivery
The holder is for the Diamond as I couldn't find a dedicated mdac4 one, but reading around the consesus is that it they are the same
I'm just waiting delivery. Morpethmobiles has taken a while, but then again they have probably been under water for a week!
just ordered this: http://cgi.ebay.co.uk/HTC-Touch-Dia...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
I've got a Carcomm CMPC-129 MOBILE SMARTPHONE CRADLE HTC TOUCH DIAMOND P3700. It fits perfectly for my MDA Compact IV.
http://www.carcomm.nl/carcomm/websh...ProductId=57F3F689-5056-8659-086FE80C261B4BB7
hey there, any chance of a pic of your compact iv in the cradle?
I'm not doubting you at all its just i'd like to see how it fits in and relate that back to the promo pic you posted with the diamond in to see the difference.
Thanks
Damian
I bought a Brodit car cradle with 3 in one adapter that fits my O2 Ignito perfectly. Got mine from Expansys UK but there are a number of websites that sell it, just google it for the best price.
On the Brodit.se website there is 2 different versions of the passive holder:
848843 - this looks like the standard 'Diamond' holder
848862 - this looks similar to the 'MDA compact IV' as its also got rounded corners on the phone!
I recommend car holders from German company Herbert Richter. Everything is made in Germany si you can expect quality to be great. There's a wide selection of suck mounts with replaceable dedicated mounts. This way I've had the same holder since vario II. plus Touch Diamond dedicated holder is a good fit for compact IV. You can get them on eBay or from expansys.
a nice one if you want your MDA compact IV in landscape mode.
from Ebay
I have used HR-parts on my previous PDAs as well. While HR does not provide holders for every device on the market, what they offer is of good build quality and works just fine.
They have been a long-time OEM-supplier for HP/Navigon-bundles.
Have fun!
tim_allewijn said:
I've looked everywhere, but can't find a decent carkit/active-holder for my MDA Compact IV.
I've tried the 'Brodit Active Holder for the Touch Diamond', but it doesn't fit due to the rounded corners.
Is there an active-holder for the MDA Compact IV?
Hope so...
Click to expand...
Click to collapse
Maybe this will do? http://forum.xda-developers.com/showthread.php?t=463753 bought is for 25€ ok its a lot of money and to start sawing in such a item isn't something what makes it better but whit a smal multitool you can make it fit as you can see in the obove mentioned link I made it fit a 2000MAh battery and that need much more space as a MDA Compact (never thought I should help someone with a %$%&*^%#$#@@$%^^ T Mobile account)
Willem
Is possible to exchange full housing HTC Touch Diamond to MDA Compact IV? I want to keep htc hardware but to change only packaging. Anyone has this experience?
Is the hardware not exactly the same anyway?
Also the buttons on the MDA are the opposite way round (phone and home buttons).
Probably less hassle to sell the diamond and buy a compact.
So there are 2 versions of the Touch Diamond as for as I know.
The original GSM phone, and the smaller rounder CDMA version.
I want to buy this cradle for the phone,
http://www.smartphonecentral.ca/htc-touch-diamond-desktop-charging-cradle-cr-g300.html
But not sure if it will fit with my CDMA version phone?
Anyone know?
the cdma touch diamond that sprint/telus/alltell has actually has an extended 1350mah battery and battery cover that is about 3-4 mm wider than the standard gsm touch diamond (900 mah) so tread carefully. You may want to look at expansys canada i found this:
http://www.expansys.ca/p.aspx?i=169488
http://www.expansys.ca/s.aspx?update=true&sid=18903305
the charger their is designed for the touch pro so it should fit your cdma touch diamond with room to spare. im actually going thru similar crap, i have a tmobile mda compact IV which is their version of the touch diamond with the slimmer 900mah battery but the look of the curvy rounded cdma TD. i wish htc had just made the curvy cdma touch diamond and square gsm touch diamond with same battery and same back its a pain looking for accessories for the diffrent phones because the back of this one is thicker and the back of that one is slim but faceted, ARRRRGGGGGHHHH. Anyways good luck hope that helped
As per subject, just wondering if all these extended batteries actually fit all the different variants of the Diamond, e.g the HTC Diamond itself, MDA Compact IV etc. I know the covers are different.
Just that the only flat back extended battery I've seen for the MDA C IV is about £40-50. Would be good if someone sold just a extended cover for the MDA and to purchase the battery itself from somewhere else.
Answering my own question (sort of)
Quite a few views on this post...
Just got hold of a Touch Pro and it's 1340 maH fits perfectly in my MDA Compact 4 (not with the original cover of course).