Database Info

"Could not update itsutils.dll" unlock cid error

Hi!
I read the wiki page and I searched on the forum but I did not find answer.
When I try to unlock the cid (I have a G3), the cmd screen give me this message:
"Could not update itsutils.dll to the current version, maybe it is inuse? try restarting your device, or restart activesync"
What i have to do?
Thanks to all.

copy the files "EnableRapi" and "Cert_SPCS" to your device and run them (you can find them inside the folder "Utils".
Then run the "LokiwizMsl.bat" from your computer again and it should work.

This trick was already described in the sim unlock part of the wiki
but i've updated the cid unlock wiki with the info.

Hi!!
I still have that message. Could you check if i'm doing something wrong?
This is the guide from the wiki:
"Do the following :
- Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them (There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")"
Sorry but this is not very clear because:
1) there aren't file called "Lokiwiz03a.zip"
2) Need I to do hard reset (or a soft reset) after execute that 2 files?
Please help me, I'm not the only one with that problem.
Thanks to all.

Pepez said:
Hi!!
I still have that message. Could you check if i'm doing something wrong?
This is the guide from the wiki:
"Do the following :
- Copy the cab's from the Utils folder in the Lokiwiz03a.zip file to your Prophet and execute them (There are two files : "Cert_SPCS.cab" and "EnableRapi.cab")"
Sorry but this is not very clear because:
1) there aren't file called "Lokiwiz03a.zip"
2) Need I to do hard reset (or a soft reset) after execute that 2 files?
Please help me, I'm not the only one with that problem.
Thanks to all.
Click to expand...
Click to collapse
Sorry thats the file from the sim unlock part, I've changed the wiki
the files you need are in pdamobiz.com_downgrade_and_unlockcid.rar

Hi!!! Thanks for your update!
I run the 2 files from my machine without hardreset after that.
That solved the Downgrade.bat operation (i did not receive the "itsutils.dll error") but it didn't work with the Cidunlock.bat command.
With the cidunlock.bat command I had the classic error and this one too from the cmd screen:
"CopyFileToTFFS(acidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - internal error"
After that I made the last experiment.
I tried to update the rom without unlock the cid and I discovered with the Italian Prophet you don't have to unlock the cid.
So I solve my problem!! Thanks to all!
I hope to help someone with this post!

Easy fix to the "Could not update itsutils.dll to the current version..." error
1. Use prapi.exe to query value of 4097.
D:>prapi.exe -q -p 4097
Default is "2"
2. Use prapi.exe to set value of policy 4097 to "1"
D:\>prapi.exe -p 4097 1
Explanation :
4097
0x1001 RAPI Policy The Remote API (RAPI) policy restricts the access of remote applications that are using RAPI to implement ActiveSync operations on mobile devices.
0 ActiveSync service is shut down. RAPI calls are rejected.
1 Full access to ActiveSync is provided. RAPI calls are allowed to process without restrictions.
2 Access to ActiveSync is restricted to the SECROLE_USER_AUTH (User Authenticated) role. RAPI calls are checked against this role mask before they are granted. ( default )
Also check : http://www.xs4all.nl/~itsme/projects/xda/smartphone-policies.html

vodafone S200 Sim unlock issue

I have a Vodafone.es S200 I m trying to unlock it but I always get an error: The system cannot find the path specified, and I dont get any code, here it is the full message:
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
InitializingThe system cannot find the path specified.
.The system cannot find the path specified.
.The system cannot find the path specified.
...........The system cannot find the path specified.
..........Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
The system cannot find the path specified.
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
The system cannot find the path specified.
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
I tried everything, I follow the instructions, I run the cabs file onto the diveice but is still the same, any idea?
thanks for your help

Ok finally i managed to unlock the issue was the pc I used a different pc no problem 2 minutes and I have got the key

Question re: TFlo Config Tool & HTC Cube [HTC TyTN II (Kaiser)]

Hey hey,
As my thread indicates my question is about the FTouchFlo Configuration Tool and the HTC Cube. Please, bear with me while I explain my process of failure.
A few weeks ago, I installed the HTC Cube and it was working great. I happened upon these forums and found the Config. Tool. So, I installed it. It worked great!
Then, I found SCLPC. I uninstalled the HTC Cube, and installed SCLPC. While it is a nice program, I decided it was not for me at this time. So, I uninstalled it and reinstalled HTC Cube and the FTouchFlo Configuration Tool again.
Unfortunately, now the Down-Up gesture is running the application "/Windows/saplaywm.exe" and under Command line parameters: it says, "/Program Files/SCLPF/Version 1-00.swf" which apparently-please correct me if I'm wrong-attempts to call up the SCLPC program.
The Config program and HTC Cube were working together before I tried out SCLPC. Somehow whatever command line in the Config program which called up the HTC Cube is no longer there. So, if I enable the FTouchFlo Configuration Tool, the Down-Up gesture no longer calls up HTC Cube, but that means I won't be able to use the Config program and it's Exclusions list, which is exactly why I installed it.
My question [finally ] is this: Does anyone know the correct command lines that I should input in my Config Tool? Maybe you can find it in your phone and display them for me? Also, does anyone know how to display any parameters available to a program in my phone?
Example:
For those of us that use or used DOS, remember how we used to type a command line like "Copy /?" in DOS and it would show you a screen like:
Copies one or more files to another location.
COPY [/D] [/V] [/N] [/Y | /-Y] [/Z] [/L] [/A | /B ] source [/A | /B]
[+ source [/A | /B] [+ ...]] [destination [/A | /B]]
source Specifies the file or files to be copied.
/A Indicates an ASCII text file.
/B Indicates a binary file.
/D Allow the destination file to be created decrypted
destination Specifies the directory and/or filename for the new file(s).
/V Verifies that new files are written correctly.
/N Uses short filename, if available, when copying a file with a
non-8dot3 name.
/Y Suppresses prompting to confirm you want to overwrite an
existing destination file.
/-Y Causes prompting to confirm you want to overwrite an
existing destination file.
/Z Copies networked files in restartable mode.
/L If the source is a symbolic link, copy the link to the target
instead of the actual file the source link points to.
Thanks ahead of time guys for your help!

CMD easy input / Terminal easy input

Hi guys, I wanna share a little tool I made for cmd input
Basically this tool stores all the commands you input in it and then it allows you to easily repeat them just by typing the corresponding number. If you input a command that is not in the database the command will be added to it; if you input the number, the corresponding command will be executed. There are other options but the tool is pretty enough self-explanatory so just try it by yourself. Remember to put the .exe or .py file in a directory which is writeable (e.g. Desktop) since the script need to create a .txt file for the command database.
This is particularly intended for when you need to repeat the same commands over and over again (specially when you mess up something while flashing a ROM or something else) but you can use it at your will
I'm attaching the .exe and the .py file; I've tried it on windows but i guess it should work also on linux (try and let me know).
Donation appreciated, paypal: paypal.me/maurosilvestricj

Pls help extract the ms zune bootloader.

Let me start off with saying I'm sorry if this is the wrong place for this tread. I'm not entirely sure where a question like this would fit. Due to my low post count I can't post on any of the development sub forums.
On to the question:
I'm working on attempting to reverse engineer the ms zune's ( how many people remember what that is ) boot loader. I've having an issue extracting the boot loader files from it's windows ce container.
I've been following the link (due to my low post count it seems I can't post outside links ) which shows how to extract the other containers.
The zune calls it's boot loader zboot.bin and when I follow the instructions I get an error message from cvrtbin.exe stating "missing address option". The thing is I am including the address but because the image starts at 0x0 the program either ignores that line or decides that that address is invalid.
Before I reverse cvrtbin to force it to accept a 0x0 address, I want to ask 1) is there a reason why the program believes that 0x0 is somehow an invalid start address and 2) is there a program that will extract a windows ce container that doesn't check to see for os files? I was able to find another program osnbtool that also error-ed out but also stated it found no os files.
Thank you!
Edit Since I can't post outside links here is the text version of the instructions
Open a command prompt and cd to the directory containing your firmware image files. Do not use PowerShell - doing so will result in unexplained spurious corruption of the dumped files (e.g. incorrect executable headers).
Run \path\to\viewbin <imagename>.bin to display header information from the image.
Run \path\to\cvrtbin -r -a <start> -w 32 -l <length> <imagename>.bin using the start and length values produced by viewbin.exe, as shown in the screenshot below. These values are different for each firmware image, and will differ from the example here.
Create a directory to house the dumped files
Run \path\to\dumprom -d <dir> -v -5 <imagename>.nb0 to dump the contents of the firmware image
The directory you created should now contain all the files from the image you just dumped, suitable for analysis with anything that supports Windows CE ARM binaries (dumpbin, IDA, etc.).