Hi All,
I have installed Destinator 6/7 (both versions) many times and it worls for 1-2times and then it stops at the first screen and today screen pops up again. The top status bar is destinator but lower half is today screen.
I even flashed my Wizard many times with diffrent flavours of WM 5 and 6. It works hardly once or twice then same problem.
Everytime I hard reset it, it works 1 time and then again the problem is shown.
Has anyone has managed to make any version of destinator to work (either 6 or 7) on any WM??? Does anyone have the same problem with me???
Thanks in advance.
Working on WIZA200
IPL=2.26
SPL=2.26
GSM=2.25.11
OS=2.26.10.2 (using a WM5 ROM)
Hi,
With destinator 6 I never had any problems.
It was working with WM5 and with WM6.
Sometimes I had to stop all other programs to get more free memory.
Did you test this already?
Hi,
I've been using Destinator 6 without any issues on my K-jam. I suggest you to uninstall everything except maps on SD. Then, install it again on the main memory. Also, surf on the Destinator technology site if there's an upgrade or something to your country.
Wish you luck!
Cheers!
hi, i had the same problem that you have now, but only with wm6,
i find out that when i hard reset my device or upgrade a new rom i allways backuped all my pim data using pimbackup 2.5.
then after the upgrade i restored all my pim info, and then the problem with destinator 6 or 7 begins.
the solution for me was that when i backuped my pim data i unchecked an option in the pimbackup called ""binary backup"", then after that, when i restore the pim data ,destinator works fine.
so, are you restoring your personal data using pimbackup?
if so, maybe this is the solution
by the way, i am using a prophet
Thanks for your replies..
Today I re-installed TNT.1933_Prof_HTC ROM and increased pool size to 12 MB. Right now the memory stats are:
Storage Memory Free = 38.8 MB
Program Memory Free = 18.2 MB
Destinator and Maps both are installed on the Storage Card (2 GB) with 200 MB free space. This made it to work for 2 times and again it stopped.
Also, I realized that the program actually crashes as there is no entry of the program in the task manager.
So this has rather become a crash issue with Destinator.
Any insight will be very much apreciated...
And, I use a Bluetooth based GPS receiver.
Thanks.
I don't think it is a memory issue. As detailed in the last post it has some 16 MB of mem free.
joesa: Yes, I also use PIM Backup to restore my Emails/SMS. Do you think that is causing the problem. I'll try to disable the bin backup while restoring.
Thank you for the clue.
I don't know V7.0 but I think it should be very similar than V6. I insist you to install the core app into the main memory and just leave all maps on SD. Then, you can hard reset many times without having to install maps again. I'm telling you exactly what my local support said at the time I faced installation issues with V6.
Good luck btw....
This indeed was a crash issue due to unwanted binaries. Thanks joesa for that clue. After disabling that binary option in PIMBackup the problem disappeared. Destinator is working Fine on my Wizard (Both program and maps on SD).
Thanks a lot for sharing your experiences.
singhravi437 said:
This indeed was a crash issue due to unwanted binaries. Thanks joesa for that clue. After disabling that binary option in PIMBackup the problem disappeared. Destinator is working Fine on my Wizard (Both program and maps on SD).
Thanks a lot for sharing your experiences.
Click to expand...
Click to collapse
Your wellcome, glad i could help!!!!
i think so after open and close Destinator 7 he don´t close the speeks after open again, no sound is avaliable, need soft resset for work again.
Only in destinator 7 i detect this, in destinator 6 works fine.
joesa said:
hi, i had the same problem that you have now, but only with wm6,
i find out that when i hard reset my device or upgrade a new rom i allways backuped all my pim data using pimbackup 2.5.
then after the upgrade i restored all my pim info, and then the problem with destinator 6 or 7 begins.
the solution for me was that when i backuped my pim data i unchecked an option in the pimbackup called ""binary backup"", then after that, when i restore the pim data ,destinator works fine.
so, are you restoring your personal data using pimbackup?
if so, maybe this is the solution
by the way, i am using a prophet
Click to expand...
Click to collapse
Ok, but is there a solution for us, who do not want to do a hard reset?
I just reinstalled everything on Thursday, can't do it again
Maybe backup and restore PIM without hard reseting, and with unchecked binary setting? Would this work?
cmavr8 said:
Ok, but is there a solution for us, who do not want to do a hard reset?
I just reinstalled everything on Thursday, can't do it again
Maybe backup and restore PIM without hard reseting, and with unchecked binary setting? Would this work?
Click to expand...
Click to collapse
i'm afraid that if you don't have a previus rom backup(sprite, spbbackup), before using pimbackup, you would have to hard reset, i never was able to make it work after restoring my pim data with pimbackup(binary)
5thWheel said:
I'm having this problem without doing anything to my PIM. It seemed to start arbitrarily. Is the restore of PIM modifying some files somewhere in a manner that Destinator doesn't like? If so, which files? Maybe mine got modified by some other app and if I delete/manually alter them I can get it going again?
Click to expand...
Click to collapse
it took me a lot of time to find out that pimbackup(binary) was the program that screwed destinator(guess it has something to do with databases), what i did to find the program was:
hard reset, install destinator and tried, install next of my needed program and tried destinator, install next program and tried, and so untill i found wich program screws destinator,
sorry i can't help
good to hear that !!!!!!
Would Activesync contribute with the crash?
I haven't any pim backup in my TYTN II and hard reseting the ppc every week is complicated.
Think I'll stop using Destinator.
Problem stills...
Any news????
I have an htc touch pro and installed destinator 7. It worked well for a few days and then suddenly refused to load. It crashed at the start screen. After a lot of experimenting I found the solution. I deleted all my sms-mms contents and then destinator was working again! I believe that certain characters from sms's are the cause, since destinator has a built in facility to send an sms. It's annoying though since each time you have a crash you need to remove your sms contents.
kospan - you're my man due to having the same issue i tried ypour solution and - that's it!!! i'm glad to tell you and all those who having this problem, too, that it's only the MMS - if you delete only all stored mms then it will work fine again too
I'm glad I could help! So only MMS? I guess that is good news because I will be able to keep my sms, which are far more than the mms.
need to delete both SMS/MMS
In my diamond, i had to delete both the SMS/MMS to make the destinator work.
Thank you guys for your support.
Hi,
i've installed the latest version of the HTC Audio Manager but if i tap on the icon nothings changes for few seconds and then the text "Load RC Failed" appears for a second or less time in the status bar.... i wanna get this prog working! anyone knows a solution for this problem?
I got a palm treo with official wm6 rom
I've got the same error on a german T-Mobile branded os, did you manage your problem?
regards,
Daniel
Same issue with HTC Touch Diamond
Got the same error message. Tried both in- and external storage.
Can someone help?
Uffe
Got the same problem too. Anyone can help ?
I've noticed that some of my HTC apps that I used with my wing and my smartflip won't work with the treo. I don't know what the issue is, but my HTC zip cab won't work either. If someone has a solution it would be great.
Hi everyone, need some help here
My TP sometimes unable to open the Write SMS box, even no matter how many time i press the Write New SMS or even using the Reply button. I need to soft reset it before it can really turn back to normal. Can anyone please provide me help in solving the problem? Thanks a lot!
did you install any other lang? if you did, might be the reason
No i didn't install any language, the CE that i installed already registered.
I am repeatedly facing the following problem.
When a call arrives, the contact pops up on the screen almost immediately, but it takes around 5 or 6 rings from the callers end for me to hear the ring on my phone.
Eg. You call me and i will see your name on my screen but it will seem for you as if i picked your call only after 6 rings, but only then my phone rings!! HELP me a lot of people are complaining that i am not picking the call immediately due to this...
Never faced this problem in wm 6.1 or earlier versions.
Somebody kindly assist me
Thanks in advance.
Hi !
I had the same problem. I think it happened when the screen was locked.
It got better after upgrading to a 23001 build.
Which build do you have on your phone?
greetz
Hi flushbeer! Thank you very much for your prompt response! Appreciate it.
I am using [July 4th][PDACorner] Ultimate-X2.V5 -23001|M2D|CHome|Enhanced Version
I even tried TPC Elite prior to that!
And yes u r right i think it happens when screen is locked. Even otherwise i think it happens.
Am using the 23001.x build only!
Thanks again buddy!
Weird... I use the same ROM and this is the FIRST ROM where I don't have this problem.
(I tried many 6.5 ROMs before and with all of them I had this Problem)
greetz
Sorry guys please read the rules, if you have problems post on the threads where you get your ROMs
Mods, please close this thread
sorry guy...
but i don't think this problem ist rom related.
in my opinion it ist build-related and therefore a more or less generic problem.
but it's not my thread anyhow
Hey it aint fair, nobody answers my question anywhere (( If only anyone can answer this.
Maybe it's becoz you are running some software that is not compatible with WM65. Like some builds of MS Voice Command. But you have to sort it out by yourself.
Edit: The way to find problem apps for your ROM:
Backup all your data;
Hard reset;
Install your apps one by one;
Every time after installed a new soft, soft reset, and check the problem occurs or not, if not, install next one, soft reset and check again, until you got the problem occured again.
Then you know it's the last installed app crashes with something. (Maybe not crash with the ROM, but other apps installed before it. To sort this out, you have to change the sequence of cab install and test again. For example, after already know the probs app, hard reset and only install this see what happen.)
What if you did not find it until installed last app? Congratulations, you already solved the problem.
This is the most foolish(time consuming) way, but it works on most cases for probs sorting.
Edit2: BTW, last time when I have similiar probs as yours, by using above-mentioned method, I sorted it out that it was caused by MSVC. (Edit3: Also if my memory is still correct, another badass for WM6.5 maybe the WM6.5 lockscreen,)
What radio are you using? Did you change radios and see if that makes a difference?
hi,
i m using i mate jamin wm5 device, the problem is sound goes off after every 1 or 2 days and even songs player do not play files like there is no sound driver, and then i do soft reset it works very fine again, then samething happens again, and i am unable to find what is and where is the problem? sometimes i think sound goes off after i have gotten so many sms's and sometimes i think RAM full problem but i find much Free RAM, I have installied Resco Keyboard, Qick menu which start on startup and so many other applications what do not start on startup, can any application creat problem like that? please help me and give a solution.
ok now I have come to know when it happens!, after receiving many sms's or many sms notifications this happens. does any one have idea to resolve this??