Related
Ok, so with WM6 still in its "testing" phase and a few bugs that just wont seem to go away, I am being promoted at work and it will require me to use my phone as a tool for the job. ie direct push and all. Should i go back to my carriers WM5 release or Stick with WM6 in hopes that they will fix the rumored direct push issues?
i never got a direct pus problem on wm6... I use my mobile for work and i am using mb edition. I think is quite ok... on Faria`s i got some problems with gprs switching on and off all the time.... strange....
I've never used direct push. how do I go about setting it up. I can put together an exchange box if needed
nottoosmart said:
Ok, so with WM6 still in its "testing" phase and a few bugs that just wont seem to go away, I am being promoted at work and it will require me to use my phone as a tool for the job. ie direct push and all. Should i go back to my carriers WM5 release or Stick with WM6 in hopes that they will fix the rumored direct push issues?
Click to expand...
Click to collapse
I have experimented with all the WM6 releases, and have not encountered any issues at all with push mail and my Exchange 2003 Server. Within a couple of seconds of a new e-mail reaching my desktop, it hits my phone.
I also have my POP3 account check for messages at 1 hour intervals. No probs there either.
I was one of the unlucky ones who did have a problem with push email on Farias WM6 ROM. It would sync the first time the phone was switched on, but then some time later would randomly stop working even though the GPRS connection was still up and Activesync said it was 'Connected' - only a manual resync would get it going again.
I tried multiple radio ROMS, 2.19, 2.25, 2.47 and 2.61 (hoping it was a radio ROM problem) but to no avail. Interestingly, I never had this particular problem with the MB WM6 rom - but that ROM had other issues, so in the end (as always) I've dropped back to Farias 3.3 ROM which is rock solid in every area.
Don't get me wrong those of you who take offence easily - Farias ROMS are great and I'm not knocking him any way - it's just "one of those things" that's probably quirky to my setup. If when he produces a new version, I'll test again.
Andrew
Most odd. Like bradsnw I've never had a direct push problem. This includes the more than 50 individual devices I've setup in the past, the 10 or so that I upgrade on a regular basis and mine. As Faria's tester and Junior Chef in Training my poor lil 8125 has seen just about every ROM variant (and mutant) imaginable, but never a DP problem. (And I've created some near bricking ROM's let me tell you!)
One thing I always do however is to not create my initial AS profile with my PC but on my device directly. (This is the only way I can get my task OTA) and I probably hard reset my device on the shoulder of Interstate 95 or a McDonalds parking lot as many times as I do at home.
I've never had an issue with Direct Push/Exchange 2003 while using WM6 either.
Dr Puttingham said:
Most odd. Like bradsnw I've never had a direct push problem. This includes the more than 50 individual devices I've setup in the past, the 10 or so that I upgrade on a regular basis and mine. As Faria's tester and Junior Chef in Training my poor lil 8125 has seen just about every ROM variant (and mutant) imaginable, but never a DP problem. (And I've created some near bricking ROM's let me tell you!)
Click to expand...
Click to collapse
I agree - very odd. I've never had push fail before on the multitude of ROMS I've tried - those sort of problems always happened 'to other people' and not me ;^)
I tried all the usual stuff, resets, new partnerships, reloading the same ROM, new radio ROMS, certificates, etc etc etc. But in the end, I had to get the phone working 'for work', so went back to 3.3. Like I said, when Farias next ROM comes out, I'll try it again.
cheers,
Andrew
achick said:
I was one of the unlucky ones who did have a problem with push email on Farias WM6 ROM. It would sync the first time the phone was switched on, but then some time later would randomly stop working even though the GPRS connection was still up and Activesync said it was 'Connected' - only a manual resync would get it going again.
I tried multiple radio ROMS, 2.19, 2.25, 2.47 and 2.61 (hoping it was a radio ROM problem) but to no avail. Interestingly, I never had this particular problem with the MB WM6 rom - but that ROM had other issues, so in the end (as always) I've dropped back to Farias 3.3 ROM which is rock solid in every area.
Don't get me wrong those of you who take offence easily - Farias ROMS are great and I'm not knocking him any way - it's just "one of those things" that's probably quirky to my setup. If when he produces a new version, I'll test again.
Andrew
Click to expand...
Click to collapse
There's nothing wrong with your push email.
Connected is good, it means that you have a connection with the server and you're up to date. This is how it shows in WM6
When you see "Synchronized Today" with a time, this means that was the last time your device updated with the server for whatever [email protected] tihs point, if you have signal....do a manual sync.
Again...CONNECTED...is good ......... SYNCHRONIZED TODAY...is ok
If your device doesnt synchronize folders at all ....you need to adjust your network connections and get the web to work 1st and then push email.
This isn't faria specific, that's how WM6 works.
nottoosmart said:
I've never used direct push. how do I go about setting it up. I can put together an exchange box if needed
Click to expand...
Click to collapse
You need an exchange account.
I use www.4smartphone.com. It's a paid service that's cheap and I let them deal with the headaches of maintaining a server. The service has been 100% so far, not to try to sell you.
If you have the means and time to set up a box, let me know and I'll help as much as I can.
No problem at all with DP mail. I just give it to the people at IT and they set it up nicely for me. And I have taken it in daily because I keep changing roms!
But I am stopping at Faria's for now
dwny said:
There's nothing wrong with your push email.
Connected is good, it means that you have a connection with the server and you're up to date. This is how it shows in WM6
When you see "Synchronized Today" with a time, this means that was the last time your device updated with the server for whatever [email protected] tihs point, if you have signal....do a manual sync.
Again...CONNECTED...is good ......... SYNCHRONIZED TODAY...is ok
If your device doesnt synchronize folders at all ....you need to adjust your network connections and get the web to work 1st and then push email.
This isn't faria specific, that's how WM6 works.
Click to expand...
Click to collapse
dwny, I appreciate your reply, but I beg to differ. I've been using push mail for a long time now, and I know when it's working or not - I'm not going to bore everybody with pointless detail, but:
I had a working internet connection via GPRS - I could surf using Pocket IE.
It would "automatically" sync my folders via GPRS when I turned the phone on. It would then stop working later.
Manually syncing is not push email? I had set the schedule settings to 'as items arrive' - why would I sync manually?
And as I said previously, I did not get the problem with the MB WM6 rom, nor the PDAviet 3 or 4 and I do not get the problem with Farias 3.3. Mail arrives automatically via GPRS (usually a a few seconds before it hits my desktop outlook) just fine in every ROM I've tried except Faria's latest. But I'll repeat - I'm not in any way 'blaming' Faria. It's just one of those things.
Andrew
achick said:
dwny, I appreciate your reply, but I beg to differ. I've been using push mail for a long time now, and I know when it's working or not - I'm not going to bore everybody with pointless detail, but:
I had a working internet connection via GPRS - I could surf using Pocket IE.
It would "automatically" sync my folders via GPRS when I turned the phone on. It would then stop working later.
Manually syncing is not push email? I had set the schedule settings to 'as items arrive' - why would I sync manually?
And as I said previously, I did not get the problem with the MB WM6 rom, nor the PDAviet 3 or 4 and I do not get the problem with Farias 3.3. Mail arrives automatically via GPRS (usually a a few seconds before it hits my desktop outlook) just fine in every ROM I've tried except Faria's latest. But I'll repeat - I'm not in any way 'blaming' Faria. It's just one of those things.
Andrew
Click to expand...
Click to collapse
Again...this is how it works in WM6
When your device says "Connected" ... you are up to date.
While there..press Menu > Status and it will tell you when your device last synchronized.
WM5 shows "last synchronized" when up to date
WM6 shows "last synchronized" when not up to date.
What I experienced:
When I get "last synchronized" ... I also don't have internet and everything was working. I go to connections and change the name of the connection and all is well. Try this & see if it works for you.....
dwny, you ARE persistant!
"Again...this is how it works in WM6"
But it *wasn't* working!
I could tell it was not sychronizing because I would get 25 emails arriving in my Outlook inbox over period of an hour, and none of them arrived on my PDA! If I simply manually synced, they would all coming flooding in.
But let's not dwell on this anymore - I'm back on 3.3 now. If I find some time, I'll do a fresh download of the ROM and try again.
thanks for you time,
Andrew
Outlook
First, you get too damn much email. 25/hour? What are you, the president?
Seriously though, something has to be running to be able to get those push notifications. With all the tweaking people do I'm not surprised that things end up breaking. My suggestions are these:
1) Turn off X Button or whatever you are currently using to close rather than hide applications. WM5 and 6 were never designed for the apps to be closed every time. Many have background features that they depend on -- like poutlook. Why do you think it's in your \windows\startup folder.
2) It is *still* in your \windows\startup folder right?
Those are your hints -- all I know is that push worked fine for me as long as I left something there to push to.
baarod said:
First, you get too damn much email. 25/hour? What are you, the president?
Seriously though, something has to be running to be able to get those push notifications. With all the tweaking people do I'm not surprised that things end up breaking. My suggestions are these:
1) Turn off X Button or whatever you are currently using to close rather than hide applications. WM5 and 6 were never designed for the apps to be closed every time. Many have background features that they depend on -- like poutlook. Why do you think it's in your \windows\startup folder.
2) It is *still* in your \windows\startup folder right?
Those are your hints -- all I know is that push worked fine for me as long as I left something there to push to.
Click to expand...
Click to collapse
President? - lol... I wish...
I get automated warnings and messages from databases and servers. And when things aren't running well, I get LOTS of emails.
Yep, poutlook was in my startup....
Anyway, after seeing all these success stories, I downloaded the ROM again (didn't trust the last download) and reflashed. Followed exactly the same procedure as normal (I flash ROMS regularly, so literally have my set routine) and guess what?
Works fine - 'straight out of the box'. I did nothing different to every other flash I've ever done....
Andrew
P.S. I now have an 'officially recognised' issue with the 2.61 radio ROM. But at least I'm back in the fold...
i am running the mun rom on tmobile usa and have no problems with exhange mail...push is working 100%
FYI - i am using the 2.61.11 radio rom
achick said:
President? - lol... I wish...
I get automated warnings and messages from databases and servers. And when things aren't running well, I get LOTS of emails.
Yep, poutlook was in my startup....
Anyway, after seeing all these success stories, I downloaded the ROM again (didn't trust the last download) and reflashed. Followed exactly the same procedure as normal (I flash ROMS regularly, so literally have my set routine) and guess what?
Works fine - 'straight out of the box'. I did nothing different to every other flash I've ever done....
Andrew
P.S. I now have an 'officially recognised' issue with the 2.61 radio ROM. But at least I'm back in the fold...
Click to expand...
Click to collapse
Glad to see a fresh install worked for you.
Be careful with radio 2.61.11, it's known to cause dialpad issues and missed calls with the newer roms.
hi! has anyone achieved to use blackberry connect 4.0 on our treo 750v without problems????
i´ve installed it but when I soft reset the device it does not show anything on the today screen except the date, time and windows icon on the left upper side.
do you know how to make it work properly??
thanks and
see you later
works fine for me with the Vodafone Netherlands ROM (1.12.0c.00) and BBConnect 4.0 Pocket PC Phone Edition from this link:
http://www.sems.org/entry.asp?ENTRY_ID=225
No probs so far
georgedorn said:
works fine for me with the Vodafone Netherlands ROM (1.12.0c.00) and BBConnect 4.0 Pocket PC Phone Edition from this link:
http://www.sems.org/entry.asp?ENTRY_ID=225
No probs so far
Click to expand...
Click to collapse
I have installed that very blackberry connect 4.0.
in what language is the rom of vodafone Netherlands???? do you think it could be possible to install it on my spanish palm treo 750v????
can you navigate the net using the blackberry 4.0 rate???
thanks
The Vodafone Netherlands ROM is in english, you can install it on every Treo 750v (losing your spanish language of course). Seems that your ROM is too old to run 4.0, what's its version 1.12.a or 1.12.b?
Yes I can browse the internet via the new BlackBerry browser in the BlackBerry folder in the programs. With BB connect 2.1 you could only use the normal connection via your operators APN and the BlackBerry service stopped. Cool new features especially when you are on a BES!
georgedorn said:
The Vodafone Netherlands ROM is in english, you can install it on every Treo 750v (losing your spanish language of course). Seems that your ROM is too old to run 4.0, what's its version 1.12.a or 1.12.b?
Yes I can browse the internet via the new BlackBerry browser in the BlackBerry folder in the programs. With BB connect 2.1 you could only use the normal connection via your operators APN and the BlackBerry service stopped. Cool new features especially when you are on a BES!
Click to expand...
Click to collapse
when you say rom version, do you mean firmware??? if so, my firmware version is 1.12.0a.00
if not, where can I see the rm version???
if my rom version is too old, where can I donwload a newer vodafone rom version which let me use blackberry connect 4.0 properly???
other question is can you listen to the radio through the blackberry connection from your treo??
thanks buddy
Yes I meant the firmware version and yours is 1.12.a which is the first coming out for the 750v. As you have issues it seems that it can' t run BB connect 4.0. The newer Vodafone Netherlands ROM is easy to find in this forum, here is the direct link:
http://rapidshare.com/files/17764237/2007-02-15_Treo_750v_NL.rar
I never tried to listen to internet radio with the BB browser. I would not recommend that, quite sure that you have a 5MB limit or a similar one in your BlackBerry plan, could be an expensive experience
georgedorn said:
Yes I meant the firmware version and yours is 1.12.a which is the first coming out for the 750v. As you have issues it seems that it can' t run BB connect 4.0. The newer Vodafone Netherlands ROM is easy to find in this forum, here is the direct link:
http://rapidshare.com/files/17764237/2007-02-15_Treo_750v_NL.rar
I never tried to listen to internet radio with the BB browser. I would not recommend that, quite sure that you have a 5MB limit or a similar one in your BlackBerry plan, could be an expensive experience
Click to expand...
Click to collapse
ok thanks,
with this nwe installation i suppose i will lose my warranty, right??? if so, do you kno how can I dump my own rom version and keep it safe just in case i would like to downgrade my treo???
I don' t know how to dump your old ROM, I guess you'll need the original spanish one. Maybe other guys can help here?
Before you flash the ROM: Did you install BB connect on the storage card? It should be installed in the device storage! Did you try a hard reset and then install BB connect again? Any other applications like Active Sync running to sync your contacts, calendar and so on?
georgedorn said:
I don' t know how to dump your old ROM, I guess you'll need the original spanish one. Maybe other guys can help here?
Before you flash the ROM: Did you install BB connect on the storage card? It should be installed in the device storage! Did you try a hard reset and then install BB connect again? Any other applications like Active Sync running to sync your contacts, calendar and so on?
Click to expand...
Click to collapse
I installed it on the device storage memory, not on the minisd card. but i didn´t try a hard reset before it, do you recommend it?
Well before flashing a new ROM without the option to switch back I would try everything to get it to work with the old one. Normally when the ROM does not fit the BB connect client you see that no PIN is generated (PIN pending or something like that). Or you have a PIN but as soon as the client connects to RIM the connection is stopped cause RIM does not accept your device ID.
If you never get a PIN or never a connection to RIM then its definitevely the wrong firmware for the 4.0 client.
Good luck.
georgedorn said:
Well before flashing a new ROM without the option to switch back I would try everything to get it to work with the old one. Normally when the ROM does not fit the BB connect client you see that no PIN is generated (PIN pending or something like that). Or you have a PIN but as soon as the client connects to RIM the connection is stopped cause RIM does not accept your device ID.
If you never get a PIN or never a connection to RIM then its definitevely the wrong firmware for the 4.0 client.
Good luck.
Click to expand...
Click to collapse
it generates a correct PIN and IMEI, but it doesn´t connect at all, and it does not appear the blackberry icon which theorically would let me surf the net using my blackberry service rate. Its installation causes a problem on my today screen as i said before, becasue it makes disappear all the calendar, contacts options,... and when i go to the today-screen configuration it doesn´t let me check again calendar, contacts, owner info,... because they simply don´t exist, they don´t appear as an option, the only option you can check or uncheck is the date, nothing more
what do you think??
georgedorn said:
Yes I meant the firmware version and yours is 1.12.a which is the first coming out for the 750v. As you have issues it seems that it can' t run BB connect 4.0. The newer Vodafone Netherlands ROM is easy to find in this forum, here is the direct link:
http://rapidshare.com/files/17764237/2007-02-15_Treo_750v_NL.rar
I never tried to listen to internet radio with the BB browser. I would not recommend that, quite sure that you have a 5MB limit or a similar one in your BlackBerry plan, could be an expensive experience
Click to expand...
Click to collapse
can anyone help to translate the upgrading instructions please?????
thanks
ok, don´t worry, I´ve just install the new firmware you told me and everything seems to be fine, except blackberry service 4.0. Now I don´t have the today-screen problem I told you before, the problem is that it does not connect and in the identity:
PIN: Pending
IMEI: Radio Off
IP address: NO connection
does anyone know how can I make it work???
thanks
After flashing the ROM (message "Update Success") you should first do a hard reset. Have you done that?
As you flashed the ROM you have lost your GPRS connection settings. Did you enter the Vodafone Spain GPRS settings in Start>Settings>Connections?
Also make sure by checking the task manager that no Internet Explorer or Active Sync are running in the background.
georgedorn said:
After flashing the ROM (message "Update Success") you should first do a hard reset. Have you done that?
As you flashed the ROM you have lost your GPRS connection settings. Did you enter the Vodafone Spain GPRS settings in Start>Settings>Connections?
Also make sure by checking the task manager that no Internet Explorer or Active Sync are running in the background.
Click to expand...
Click to collapse
I just did a soft reset, i´ll try a hard reset right now
After installing BB connect 4.0 again, do a soft reset. Then make sure that the radio is switched on and check your GPRS connection settings. Then tap the BB symbol in Settings System. It will say "Preparing for first use" and after some seconds it will require another soft reset.
I have just hard reset my device and install balckberry connect 4.0 again, reboot it, but still PIN pending and IMEI Radio Off.
I have´t install de GPRS connection settings yet, is it compulsoy to make it work???
I use blackberry as a personal user, not for enterprise. But if I install the blackberry connect 2.0 it just work fine.
It works for BIS (personal Internet Service) and BES (Enterprise). I tried both with this 1.12.0.c firmware without any problems. When it asks for the PIM options (calendar, contacts, etc.) you have checked no checkbox, right? And the Treo is not cradled or connected to your PC via cable, right? And Active Sync or IE are not running in the background, right?
georgedorn said:
It works for BIS (personal Internet Service) and BES (Enterprise). I tried both with this 1.12.0.c firmware without any problems. When it asks for the PIM options (calendar, contacts, etc.) you have checked no checkbox, right? And the Treo is not cradled or connected to your PC via cable, right? And Active Sync or IE are not running in the background, right?
Click to expand...
Click to collapse
I´ve just followed your instructions, but nothing is resolved yet. The PIN is still pending and the IMEI Radio Off.
Are you on UMTS? Try to switch the band to GSM only.
And check if you really have this at Settings>About>Phone:
Software Version: Palm Build 7, HTC Version 1.16
Firmware Version: 1.12.0c.00
That' s the version which runs BB connect 4.0 without issues, I' ve seen a lot of other postings in other forums of other people using it.
Also make sure that your BlackBerry provisioning at Vodafone Spain is correct.
Anyone else have the issue of not being able to get pop email from cooked Rom's? I can get exchange mail, I can get phone calls, and hear the system sounds fine. I just cant get pop mail to work. I have tried about 4 or 5 Rom's, and all the radios listed in the sticky post. Please let me know how you fixed it, or if you know how to fix it.
thanks.
Maybe it is more of a setting for the POP account than the ROM's / Radios you have tried.
Maybe the POP accounts settings or port or something else - you are using improper settings? Hard to say...
Maybe someone will chime in with news about 4-5 ROMS all having problems with POP email.
need to go through the account settings in outlook to make sure you are using the right connection. 99.9% sure it is not the rom, just the connection settings
Its the same setting I am using for the one rom that will work. And its gmail, and verizon, so it auto downloads the settings from the web.
Did you make sure you have gmail setup to use pop3 connections?
yes I did. On the rom it works with, I can set it up and work with radio .09, but if I just change to any other radio like .11 or .17 or any other is will stop working. Then change back to .09 it will work again.
can anyone help?
email just broke today
My email was working last night as late as 11 pm. As of this morning I can't even get email to launch! I have tried launching via the today screen, windows live and thru the programs pull down. Now get this, I did a hard reset and reflashed and did a restore of the last good working backup..same thing! I'm running dutty's v7b hybrid rom. Also, voice command just started giving an error immediately on a soft reset. i don't know if this is related or not, but I just started searching for email issues and saw this thread. I have both hotmail and yahoo mail account configured. This after about of week of working fine with a replacement tilt for te 3G bug. Is it possible for AT&T to send something via an update that causes problems for cooked roms? I mean why won't a reflash fix this?
rich
a little help
One thing that I had to do with my comcast email was to forward it to a hotmail account. Nothing I tried would get my comcast email to work on the tilt. This works(or worked ) great for me. My issues are some sort of conflict with apps or a memory leak of some sort, but in general I suspect some email providers don't support pop for whatever reason, so maybe give the forward to hotmail a try.
rich
TimSykes said:
can anyone help?
Click to expand...
Click to collapse
Perhaps it may help to be a bit more specific with the problem that you are having? Are you getting any errors or is it that the mail has simply not just appeared? If the latter is the case, not to insult your intelligence, but be sure to go through gmails settings and first of all enable pop...secondly, if you'd used pop somewhere else prior to that phone, you have to tell gmail again to re-enable pop mail even if it has been downloaded (I'm paraphrasing the wordage). You'll have to do this each and every time you switch the device/software you use to get your pop mail. (Imap wouldn't but imap currently is screwed from gmail's end)
without re-flashing my ROM, I can’t get the error, but it said something to the effect that it cannot connect to the server check the dialing rules. Every time I tell it to do a send a receive it would disconnect the 3g, reconnect it about 2 times, then give a issue with the 3g connection. And it’s odd because 3g works with everything but pop mail. It works for internet, and exchange email. It just when I do pop email. I have only been able to get pop to work with official att ROMs, and with radio .09
TimSykes said:
without re-flashing my ROM, I can’t get the error, but it said something to the effect that it cannot connect to the server check the dialing rules. Every time I tell it to do a send a receive it would disconnect the 3g, reconnect it about 2 times, then give a issue with the 3g connection. And it’s odd because 3g works with everything but pop mail. It works for internet, and exchange email. It just when I do pop email. I have only been able to get pop to work with official att ROMs, and with radio .09
Click to expand...
Click to collapse
Ok, now I know exactly what you are talking about. I've had the same problems before, it seems as if autoconnect for some reason when I flashed didn't work fully. What I had to do was install the carrier settings cab that I kept over from my previous device. On some roms this happend for me, on others it didn't, it probably has something to do with the rom being HTC based or AT&T based. Try installing the Cingular/AT&T carrier settings cab found here.
http://forum.xda-developers.com/showthread.php?t=349630
I've attached to this thread as well. Be sure to report back if this works or not.
great, thanks I will have to flash it tonight and test this out. It would make me very happy.
no it did not work. It killed the internet on my phone.
TimSykes said:
no it did not work. It killed the internet on my phone.
Click to expand...
Click to collapse
For what its worth since you're flashing ROMs, try flashing Q-Mobile 1.2 (sounds like you'd want the Tilt version since you're a US AT&T user). I can confirm that pop mail works just fine so if it doesn't work for you there then you can safely assume it is something other than your choice of ROM brand that is causing the issue. Cheers,
I found what it was, I had to change isp.cingular to wap.cingular
Glad to hear...sorry it didn't work immediatly.
Hey guys, i've seen a number of different threads which "kind of" talk about this issue. I'm hoping to make this the definitive one. I'm on hour 10 of working to try to get this running..
(My apologies in advance if there is already one out there that i haven't found. i have been really looking and i think i tried it all... im sure thats what everyone says )
Hardware: HTC 8925 a.k.a At&t Tilt a.k.a TyTN II
Software: Duttys Official WM6.1 Release
Radio: 1.64.06.04
Provider: At&t (US)
Problem: BlackBerry Connect's "Identity" Tab reads "PIN: Pending"
I should also mention that i called At&t to confirm (prior to all of this) that i have a BBConnect service plan, it is active, and there is nothing on their end that would indicate a failure of any sorts.
Attempted Fixes (These have ALL failed):
I've tried every combination of having active sync enabled and disabled during bbconnect install.
I hard reseted before every install. Soft reseted after issue still occurred even after bbconnect install rebooted.
All tests were performed with the the HKLM\System\Versions Aku set to .0.4.2 as per Dutty's wiki: (http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser)
I also tried various combinations such as .0.2.0 and .0.3.6 and .0.3.0
Even tired changing Device ID to HTC_P3450
Tried all of the following BBConnect software downloads:
4.0.0.84:
http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90:
http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
Tried installing this one both by copying cab file over to local device and through device web browser:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
I'm installing from and installing to the local device memory, not the storage card..
i think i covered it all... oh, i didnt try the one HEX edit solution, because i didnt think its applicable to dutty's rom..
can ANYONE please help?!
---------------UPDATE--------------------
Okok...so problem solved... i thought i read something similar to this solution somewhere.. but..well whatever... frustrations are over (the problem always seems to find a way to fix itself after you post help for it! )
Process:
1. Hard Reset (set up initial settings, connect to provider, its a total of two reboots iirc)
2. Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
3. Soft Reset
4. Change Device ID to any value (Settings->System->About->Device ID)
5. Soft Reset
6. Install BBConnect 4.0.0.97 via device browser from http://www.america.htc.com/mobile/connect/8925/
7. Installation reboots system
8. Disable 3G connection, force to use EDGE via wireless connection manager
9. Device receives PIN, activates, etc..
10. Enable 3G connection
Notes:
1. So i dont know if items 2,3,4, and 5 were really required.. after preliminary testing, everything works fine with the 3g connection turned on after initial registration.
2. I noticed that the BBConnect Today icon kept showing an exclamation mark indicating its outgoing connection was being blocked. Also the status window kept showing that the connection was suspended by the user, when i never did anything.. so i tired disabling the 3G and sure enough.. problem solved..
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
wooooooooooooooooooot, thx for the solution.
Man...thanks a lot for all the help...it worked like a charm...and i am using it here in dubai...uae where the black berry doestn support the kaiser offically
cheers bro
Great work man, great work for users who uses BBConect
3G still working?
Quick question for those who tried the (disabled 3G to Edge) and then re-enabled 3g.
Does your 3g still work? Have your tried to place calls in 3G mode? I am on my third Tilt, the prior two times I lost 3g after installing blackberry connect, and I want to see if anyone else has this problem, before a try a third time.
Note: On my previous two phones all worked well when I downgraded to GPRS (Edge) as described, but I never got back 3g (even after flashing and removing BBConnect)
elec.two said:
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
Click to expand...
Click to collapse
I added this post to Dutt's WIKI and gave you due credit for your hard work.
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Strange... All I had to do with my Tilt was set the AKU to .0.4.2 or .0.4.4 in the registry before installing the BB Connect software.
I've used the .92 & .97 installers from CAB files on my SD card just fine.
If you change the AKU version after the BB software is installed, it won't work right, as it will still drop the connection. You'll have to reinstall the software.
http://forum.xda-developers.com/showpost.php?p=1903958&postcount=5
Quick Question
So to those of you who have BB Connect running, is all well with your 3G? Thanks for your help, I want to hear a few success stories before a walk down this path again
so I followed the steps, and got everything installed and turned off. I'm trying to get an unlocked tilt on my blackberry account on t-mobile.
The problem is its installed, but the email options are greyed out. We don't use an exchange server (or if we do it is configured very wrong) as I have pop3 information on my t-mobile blackberry page. It says I register successfully on the network, but I still don't receive emails. What do I need to chnage?
edit: fixed - I had to get back online and say yes that I had a new pin.
THANKS!!
lcohen999 said:
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Click to expand...
Click to collapse
that is the same problem I have left now, almost like hardware related.
does AT&T default one can do multiple APNs? as it is officaly support BBC.
I installed Blackberry Connect and I am using it with a Blackberry Enterprise Server.
But I see in order to have the BB icon, the GPRS is always attached. Should it work like this ? I know/knew that with Blackberry phones it attaches to GPRS only when incoming email is coming, and only with Microsoft Directpush technology it stays attached all the time.
If it works like this ( Always On ), is there a difference between BB Connect for WM, and Outlook with Microsoft Direct Push ?
Yours,
Alex
elec.two said:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
Click to expand...
Click to collapse
This link doesn't seem to work, it's actually supposed to be:
http://www.america.htc.com/mobile/connect/8925/index.html
The problem is, when you click "install now" it still can't find the cab. The 4.0.0.97 cab is now mirrored here:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_al_4.0.0.97.cab
desktop manager software
Do you have a link for desktop manager?
I have the version 4.x.17 and cannot connect with the bb on the pda.
I don't know which is the latest or most compatible version for desktop mgr having in consideration what you have in the pda. please, give me some light...
Thanks from a Touch DUAL user....
Thanks Elec.Two
Just added this to the Touch Dual Forum (Nike) as it works a dream for us too!
http://forum.xda-developers.com/showthread.php?t=390284
Has anybody an idea how this will work on a Pharos / HTC P3470? I just tried it described in this taks, but without success.
I had 2 dots and an x
I updated to Dutty's ROM today, and had problems with BBC.
So I searched, found this page and did exacty as told. No luck. Tried again. No luck.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM]
This worked for me. This info is for noobs, of which I am one!
I have just updated my TyTN II to WM6.1 and bbconnect (version 4.0.97) stopped working. Basically it had PIN marked as pending and was reporting no connection.
I have executed only step 2 (change hklm) and 3 (soft reset) from elec.two procedure and it resolved my issue - bbconnect works now. I have not reinstalled the bbconnect.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM
Click to expand...
Click to collapse
Well, I have to thank you on this! I could not get BB Connect to work for the life of me, and your fix finally go t it working!!!
Thanks!
.... and now for the Diamond - same old problem....
Have tried all the known fixes - I think - anyone had any success with bbconnect on the new diamond? Sigh.....
after failing to get internet sharing to work with the latest TNT rom i went for WM 6.1 VISTA From PDAVIET and WM6 Titanium Version 2 which connect fine but i cannot browse or even ping google or the dynamically assigned DNS despite showing that its connected. Please help me out.
Please respond to my question, im suffering with lack of internet..i will appreciate any form of help
I wasted a whole day on it, finally found out it works in some ROMs and does not in others. I was using HK's HongKong ROM something to do with PDAVIET or something like that and nor the DUN neither ICS worked, I flashed SNN 3.1 for some reason, although I am going to throw it out now but both ICS and Wireless Modem with USB worked fine. I did not and will not try Bluetooth because I don't want an empty battery after an hour of surfing on the laptop so USB keeps charging and is more reliable than bluetooth but that's just my preference. Good Luck! And if it does not work in the first go there is no use reading and trying all instructions on the internet, they WON'T WORK!! Switch your ROM if it does not work.
ICS:
- No need to disable USB-PC thing in settings
- No need to kill or disable USB in active sync
- No need to do anything on the PC
steps:
1. unplug USB (if plugged in)
2. Launch "Internet Sharing" from Programs or CommMgr
3. Select USB and your current GPRS/EDGE/3G connection
4. Click connect
5. Quickly connect USB
6. Wait and see all the things being automatically installed
7. Enjoy!
AGAIN IF IT DOES NOT WORK, SWITCH ROM, I read and tried everything, disable that, enable this and it did not work! But SNN 3.1 works great. Though I hate other things in the ROM and will try other ROMs now, So far liked BlackDiamond 3.x but did not need ICS at the time, will post here about other ROMs I will flash this weekend.
I can confirm, ICS works on BlackDiamond 3.1 ROM. I had this ROM earlier did not know that 180MHz in OMAPClock is faster than 204MHz, thought the ROM slowed my phone down and flashed to HK's ROM. Anyways, I am keeping this ROM it maybe older than the others but it works. Maybe will try the 19588 HTCDiamond ROM when a better version comes out. Hope this helps you.
i appreciate your responses...tried all that but failed so downloading black diamond rom to try it then will let you know how it went...thanks again
OK, one thing I just discovered, WIFI is not working with BlackDiamond, now thats a bummer for me at least. I need WIFI when I am at work and ICS when I am elsewhere.