Related
Alex's Cooking Kits wiki
See the wiki for what's new.
Old v4 Cooking Kit
V4 cooking kit here for historical purposes only. See wiki for latest kit.
Cooking Kit v4Use the Kaiser ROM Kitchen Tutorial to add back all the OEM packages and its just like the shipped ROM. Add back any combination of OEM packages and take control of what gets put on your device by cooking your own ROM!AT&T 1.60 Cooking Kit v4
ROM Folders [updated 12-20-07]: Megaupload
1.27.14.09 Radio nb [added 12-07-07]: Megaupload | Rapidshare
SOD / XIP Fix [added 12-15-07]: Only needed if using 12-08-07 or older folders. See post #3
HTC 1.56 Cooking Kit v4
ROM Folders [updated 12-20-07]: Megaupload
1.27.12.11 Radio.nb [added 12-16-07]: Megaupload | Rapidshare
1.27.12.17 Radio.nb [added 12-16-07]: Megaupload | Rapidshare
1.27.12.32 Radio.nb [added 12-16-07]: Megaupload | Rapidshare
SOD / XIP Fix [added 12-17-07]: Only needed if using 12-08-07 or older folders. See post #3
OEM Packages v4
_Alex_'s consolidated OEM Packages [Updated 12-20-07 @ 5:00 GMT-8]: *REMOVED*
OEM packages stripped from AT&T and HTC ROMs
OEM packages from Pandora Kitchen (thanks mattkr!)
OEM packages from Apache WM6 Kitchen (thanks helmi_c & PPCGeeks team!)
All duplicates removed
Working SmartDialer OEM Package [added 12-24-07](thanks fttilt): Megaupload | RapidShare
Working TCPMP OEM Package [added 01-20-08] (thanks ecltech): see post
More OEM Packages can be found in the FAQ section of the Kaiser ROM Kitchen or OEM Package tutorials.
Changes, Fixes & Known Issues
V4 cooking kit here for historical purposes only. See wiki for latest kit.Thread Change Log
12-04-07
Initial release date
12-07-07
Radio.nb added
12-15-07
All files required for SOD/XIP fix are in post #3.
NetCF & SQLMobile 3.5 packages added.
UltraClean ROM added
12-16-07
Multimedia ROM added
ROM pictures added
Updated UltraClean ROM with file explorer fix
12-17-07
AT&T 1.6 folders updated
SOD XIP fix
Program folder icon location changes
Removal of SqlCeMobile and SqlCeMobile_Lang_0409
Fixed Ringtones issue
AT&T 1.6 OEM Package folders updated
Added SqlCeMobile 3.0
Fixed sliding sounds typo
HTC 1.5 SOD / XIP fix added
12-18-07
HTC ROMs updated (with SOD/XIP fix, NetCF 3.5 & SqlCEMobile 3.5)
12-18-07
HTC folders uploading while I sleep
All HTC specific packages are included by default in OEM folder instead of as individual packages
Contains 12-19-07 bluetooth fix & SOD/XIP fix
12-20-07 Version 4
Consolidated AT&T / HTC OEM pack
Little or no difference between AT&T & HTC OEM packages, dupes deleted and consolidated.
Other people's OEM packages (PPCGeeks Apache Kitchen & Pandora's Hermes Kitchen) will be added for convienence, with duplicate packages removed and/or UUIDs made to be unique.
Consolidated ROM folders
All AT&T / HTC specifc ROM upgrades will be put into the OEM folder w/OPTION.XML. These upgrades will be cooked in by default.
12-24-07
Removed all ROMs from this thread for housecleaning
Known OEM Package Issues
12-04-07
When all packages are applied, additional icons (Comm Manager, Internet Sharing, RealPlayer, Windows Media Player, etc) appear in program menu, which are not present in the AT&T shipped ROM. This is a minor issue and will not be fixed as provxml files are PITA
HTC HomePlug package has 9 icons, however, the 8th icon does not display on Tilt ROM
Sliding Sounds package has typo - The definitions for Sliding Sound 0 are both for "out"; the first one needs to be changed to "in". (Thanks slimshadee) (fixed in 12-17-07 OEM package update)
12-07-07
Ring-WindowsMobile and Ring-Vision ringtones show up, but are not present. (fixed in 12-17-07 ROM folder update) This can be resolved by changing the following in SYS\Base_Lang_0409\813fd1d1-ca6f-4b6d-96d2-c97fb99bd535.rgu:
Code:
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\RingPreview]
"DefaultSound"="Ring-WindowsMobile .wma"
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\Ring]
"DefaultSound"="Ring-WindowsMobile .wma"
[HKEY_CURRENT_USER\ControlPanel\Sounds]
"Ringtones"=multi_sz: "Ring-WindowsMobile .wma",
"Ring-Standard .wma",
"Ring-Vision .wma"
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Sound"="Ring-WindowsMobile .wma"
to
Code:
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\RingPreview]
"DefaultSound"="Ring-Standard .wma"
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\Ring]
"DefaultSound"="Ring-Standard .wma"
[HKEY_CURRENT_USER\ControlPanel\Sounds]
"Ringtones"=multi_sz: "Ring-Standard .wma"
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Sound"="Ring-Standard .wma"
12-15-07
All files required for SOD/XIP fix are below. (Included in 12-17-07 ROM folder update)
12-17-07
Duplicate XMRadio folders found in 12-17-07 AT&T OEM folder update (thanks jorryn) and Unlimited fix not working [both fixed in 12-20-07 v4 Update]
01-??-08
TCPMP RGU file requires carriage return at end. See first post for update.
SOD / XIP Fix (thanks to hang.tuah)
Delete the following folders from \kaiserkitchen\OEM
OEMXIPKernel
LangDB (Should be gone already)
Delete the following folders from \kaiserkitchen\SYS
MSXIPKernel
MSXIPKernelLTK
WinCENLS_WWE
AT&T 1.60 Only
Add the following ZIP files into the appropriate directories
OEM_DPI_96 to \kaiserkitchen\OEM
OEMOPERATORS to \kaiserkitchen\OEM
XIP to \kaiserkitchen\ROM
HTC 1.56 Only
Uncompress HTC_156_XIP.ZIP and add XIP to \kaiserkitchen\ROM
Tired of Flashing
Just installed and I must say it's the fastest out the box so far.
Because it's clean & an AT&T Rom...I haven't had any carrier related issues, no registry tweaking required & I have plenty of space to put what I want & need.
All the other ROMs required too much tweaking and I also experienced some freezing.
I went thru this ROM flashing crap with my MDA...just want the damn thang to work.
From what I've seen and experienced so far....clean & stable is the way to go.
This device has plenty of storage space so there's no need to stuff it like with other devices.
If you have more than 60megs of crap to install...get a laptop
Thanks for the ROM/ROMs & I hope this is my last flash
Very Cool! Thanks for doing this!
I'm downloading the clean rom now and then will push it up to other sites for mirrors. Can someone do the same for the other two downloads (OEM Packages and ROM Folders)?
[Edit] Ok, I griped to quickly... MegaUpload let me pull all 3 down one after another (never been able to do that before). I'll mirror these shortly so there are other options.
what about the latest OS and .net?
This is a very clean ROM, but it does not have the latest .net and OS - any chance of on newer version?
Congratulations, you're making a great job...
Cheers.
bsw11 said:
This is a very clean ROM, but it does not have the latest .net and OS - any chance of on newer version?
Click to expand...
Click to collapse
It's going to take some time as i'm going to need to dump the registry for this... Might be another release tonight, depending on my free time.
Here's HTTP mirrors to the files:
_Alex_'s UltraClean ATT 1.60.502.3 ROM OEM Packages.rar
_Alex_'s UltraClean ATT 1.60.502.3 Cooked ROM.rar
_Alex_'s UltraClean ATT 1.60.502.3 ROM Folders.rar
mfrazzz said:
Here's HTTP mirrors to the files
Click to expand...
Click to collapse
Thanks for the mirrors Mfrazzz! Links added to the first post.
I've also added a link to the PPCGeeks Apache Kitchen in the first post for their awesome collection of OEM Packages...
would this work with the new radio or would i have to downgrade ?
lildogg said:
would this work with the new radio or would i have to downgrade ?
Click to expand...
Click to collapse
The ROM includes the latest radio 1.27.14.09, so no worries for upgrades or future downgrades.
Please tell me I can use a custom 2G dialer and have smart dialing options enabled? and that there's no (A) in the dial screen menu
THANK YOU!!!!!
Finally...a clean base with options to cook an ATT ROM for the Tilt.
I have one note for you Alex...
Your OEM_ATT_160_Sliding_Sounds package has a typo in the rgu file (this same typo is also in the 1.56 rom package folder as well)...
The definitions for Sliding Sound 0 are both for "out"; the first one needs to be changed to "in".
My last goal is to completely obliterate touchflo...I thought I did so from the 1.56 rom package you provided by eliminating the TFSettings and Registry entries, but I think touch.dll also needs to be removed, am I correct?
Thanks again for your great work..
shadee
I can't stand touch flo either
Alarm no worky...I'll try the newer version with 3.5.net and see what happens.
Workaround: loaded ptravelalarm
NetCF 3.5 links updated in main post.
mfrazzz said:
Very Cool! Thanks for doing this!
Click to expand...
Click to collapse
slimshadee said:
THANK YOU!!!!!
Finally...a clean base with options to cook an ATT ROM for the Tilt.
Click to expand...
Click to collapse
dwny said:
Just installed and I must say it's the fastest out the box so far...Thanks for the ROM/ROMs & I hope this is my last flash
Click to expand...
Click to collapse
You're welcome! I like to hear people are using my ROM and are happy with its minimal featureset. I'm even happier when people use the entire package to cook their own ROMs!
shannoncole05 said:
Alarm no worky...I'll try the newer version with 3.5.net and see what happens.
Click to expand...
Click to collapse
In NetCF 3.5 ROM, was able to set an alarm in the 'clock & alarms' control panel just fine and it went off at the appropriate time. Have not verified if this is a problem with NetCF 2.0.
ericc191 said:
Please tell me I can use a custom 2G dialer and have smart dialing options enabled? and that there's no (A) in the dial screen menu
Click to expand...
Click to collapse
Should be able to install any cab on top of the dialer. Smart dialing is available as an OEM package, but not installed in the ROM.
slimshadee said:
... Your OEM_ATT_160_Sliding_Sounds package has a typo in the rgu file...
Click to expand...
Click to collapse
Added to the list of known issues, will upload revised package in the near future.
slimshadee said:
My last goal is to completely obliterate touchflo...I thought I did so from the 1.56 rom package you provided by eliminating the TFSettings and Registry entries, but I think touch.dll also needs to be removed, am I correct?
Click to expand...
Click to collapse
Yup, that should do it. I'll consider releasing another rom with Touchflo disabled and an OEM package to re-enable. Thanks again for all your input!
I am seeing problems with netcf rom. To fix, install cab. Will spend some time fixing rom and oem package when I'm in front of a computer.
-- NetCF 3.5 ROM & OEM package removed.
Thanks a million but...
Alex;
Thank you for releasing a clean ROM; but I also have to say ARRRGH! Why? Well I thought when I got the Tilt that my days of being a "flashaholic" had been cured by going from a Wizard to a Tilt. I mean, this thing has more than enough memory for me, both storage and operating, is certainly fast enough for what I use it for, and other than a few little quirks which I was able to take care of pretty much great out of the box.
Then I decided that I wanted the new radio since there are a couple of spots I am in every day where reception is iffy, but to get the new radio you need the new ROM so the idea of flashing crept in. I downloaded the "newer stock" AT&T ROM but got busy at work. I knew the kitchen existed but just didn't feel like getting into it since work has been 14 hour days and traveling so I simply don;t have time to be messing with my device or dealing with it not being 100%
But now that you have such a clean ROM, all the packages easily accessible I seem to have caught the bug again big time! I used mattrk's kitchen with my Wizard so I understand the basic concept of packages into OEM, build OS, create nbf and flash but this one seems a little different. I read the readme and everything else I can find and I know that the kitchen creator was working on a step by step but I was wondering if someone could validate or correct my thought process here.
I downloaded and installed the kitchen and the build OS updates. I just extracted them into c:\kaiserkitchen. There was nothing overwritten so I am not sure if I did this properly.
I installed hardSPL
From your first post I downloaded the cooked ROM with NetCF3.5, the OEM packages and the ROM folders. This is where I got a little confused. If I have the ROM folders can I simply add the OEM packages I want (including the NETCF3.5 package NETCFv35_wm_armv4i) into the OEM folder, move all three folders to the Base ROM folder in the kitchen and then use the kitchen starting with !Cook?
Alternatively do I need to extract from the whole ROM I downloaded and then do the rest of the process?
Also, I saw your post about some issues with NetCF3.5 ROM, that you said could be fixed with a cab, but I don't see it. Would there be the same problems if I added the package NETCFv35_wm_armv4i?
Sorry for asking a question that I could probably just experiment with on my own and figure out but I simply don't have enough hours in the day lately.
Thanks again for all your work on this!
While the WM6.0 and WM6.1 edited ROMs with the newest NETCF v3.5 come
out one by one, most of them have a problem of incompatible NETCF and SQL with some softwares.
< For example >
Software 1. " Six Law" -------> e-book database of law, sqlce30.ppc.wce5.cab is needed for it (also installed manually)
Software 2. " All-In-Me" ------> business software, sqlce.wce4.armv4.cab and sql.wce4.armv4.cab are needed for it (also installed manually)
After the two softwares mentioned above installed and run,
I keep getting the error message listed below:
System.IO.FileLoadException : Could not load file or assembly
'System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes'
or one of its dependencies.
The located assembly's manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)
After the discussion in this thread (especially thanks to juju-35), we get a
solution to fix that problem. List as below:
For people who need the solution to fix the incompatible NETCF and SQL,
Just collect the files mentioned here and install according to the instructions.
1. NETCFv2.wm.armv4i.cab-----> I don't know why I couldn't upload this file
But you can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0 /WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it. It provides the assembly
of 'System.Data.SqlServerCe, Version=3.0.3600.0.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
If anyone occurs any other special situation, please post it here for discussion.
Craig Shih
Is there any way to have downward compatible?
Maybe the sqlserverce is in the rom files so we can't made any modification to them.
i dont see my rom listed
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
austinsnyc said:
i dont see my rom listed
Click to expand...
Click to collapse
Sorry, I had spend too much time to reflash my TyTN II so that there might be some other ROMs not yet tried.
I 'll give it a try when I get some free time.
Thanks.
L26 WM 6.1 Professional WWE V5
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Thank you my friend,
I was reading your thread before and saw which ROM's are compatible,
it was easy to take out the Sqlce from one of these
Cheers,
Leo
craig_shih said:
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Click to expand...
Click to collapse
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
_Alex_ said:
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Click to expand...
Click to collapse
Laurentius26 said:
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
Click to expand...
Click to collapse
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
_Alex_ said:
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
Click to expand...
Click to collapse
Hi, Alex, your rom is also very nice. The only one issue I occurred is that
after installing the E-book database of law I got an error message
as follows,
The file 'SLink' cannot be opened. Either it is not signed with a trusted certificate,
or one of its components cannot be found. If the problem persists, try
reinstalling or restoring this file.
I have installed sqlce30.ppc.wce5.cab and NETCFv35.wm.armv4i.cab manually,
but still got the error message.
Sorry that I didn't describe this in the first post.
Passion! said:
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
Click to expand...
Click to collapse
Hello,
If your problem(s) come form the .NET CF 2.0 vs 3.5, which I think was mentioned to be the problem for esword in particular, there was actually a workaround posted in Quentin's ROM thread. I ran into the same problems with some of my cabs, I did the changes suggested in the thread, and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsoft website.(Install file called NETCFSetup35.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it (prog can be found in Program Files/.NET directory on your PC)
THe NEcfg.exe is a nifty utility that allows you to detect all .NET CF versions installed on your PPC, and apply a default version to all programs but setup a few programs to run on a different .NET CF (like 2.0).
This way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the default on those ROMs is 3.5).
Hope this helps.
Juju
juju-35 said:
Hello,
there was actually a workaround poste on this in Quentin's ROM thread. I did it and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsfto website.( Install file called NETCFSetuov45.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it
THe NEcfg.exe is a nifty utilisy that allows you to detect all .NET CF versions installed and apply a default version to all porograms but setup a few programs to run on a different .NET CF (like 2.0).
THis way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster,, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the feault on thsoie ROMs is 3.5).
Hope this helps.
Juju
Click to expand...
Click to collapse
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
craig_shih said:
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
Click to expand...
Click to collapse
Need a lot of help myself (!), so I am glad to help others if/when I can. It is the whole point of a community
Make the NetCF Fix more easier
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation：
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
craig_shih said:
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation：
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
Click to expand...
Click to collapse
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
_Alex_ said:
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
Click to expand...
Click to collapse
Thank you. I'll edit the topic and contents as soon as possible.
Craig Shih
For the fix to be activated, the NetCF Config folder should be copied
to main memory. For me, if I put the NetCF Config folder in micro SD card,
the fix doesn't work. So I copy the folder to Program Files folder in main memory.
won't install for me...
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
vestaviajag said:
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
Click to expand...
Click to collapse
i have this problem when trying to install .net 3.5
any help on this error?
Is it possible to have both installed simultaneously and in ROM? I have had a look at the files with each OEM package and there are two common files (cgacutil.exe & mscoree.dll). I have attempted to put both .NetCF packages in ROM - i.e. removing the two older files from the .NetCF 2.0 package however it doesn't work. The ROM works, however .NetCF 2.0 reliant applications (VoIPSetup.exe, LiveSearch etc) don't run.
Just wondering if anyone has managed this?
Cheers
Andy
Yes. Then run the NetConfigurator (can't find the link at the moment) to select which app will use which version. I use it now.
Please let us know the link as I also cant get the link durring my initial searches.
tekknogenius said:
Yes. Then run the NetConfigurator (can't find the link at the moment) to select which app will use which version. I use it now.
Click to expand...
Click to collapse
Yes I cooked the .Net Configurator (NetCFCfg.exe) into my ROM and tried this but it didn't work. The Configurator works and I can change the .Net version that is used for the Applications it lists, however the .Net reliant applications don't run. I think the two overlapping files are the issue.
Did you cook both .NetCF versions into your ROM or did you add one?
Andy
ADB100 said:
Yes I cooked the .Net Configurator (NetCFCfg.exe) into my ROM and tried this but it didn't work. The Configurator works and I can change the .Net version that is used for the Applications it lists, however the .Net reliant applications don't run. I think the two overlapping files are the issue.
Did you cook both .NetCF versions into your ROM or did you add one?
Andy
Click to expand...
Click to collapse
I added it after .NetCF 2.0 to a ROM that had 3.5.
BTW here's a link for NetCFCfg.exe
http://www.microsoft.com/downloads/...14-A27D-4148-BF01-86C2E0953EAB&displaylang=en
Hi...
I'm creating my own ROM. But have small problem.
My ROM is based on oficial HTC Kaiser ROM, which includes NET CF 2.0 and SQL CE 3.0.
So I decided to remove old versions of Net CF and SQL CE.
But... When I remove NetCF and SQL CE... And replace it by newest versions (both 3.5), the ROM doesn't work. When I flash it into Kaiser and turn it on, cprog.exe is crashing, Contacts and Calendar doesn't work...
I think it's caused by SQL CE 3.5... If I remove Net CF, but put back SQL CE 3.0 everithing works OK.
Can you help me with removing old SQL CE and upgrading my ROM to 3.5 version?
Hi bro,
you should better PM a cook instead of opening this thread. No offence mate but don't you think this section should not have anything else but threads of ROM. I wish you good luck for your future projects.
I am not sure if this will help but here goes anyway....
I had issues integrating .NetCF 3.5 into my custom ROM by replacing the .NetCF 2.0 that was in there by default. The ROM would build but none of the .NetCF applications would run. It turned out to be a 'module' issue with the OEM package I was using. All the OEM packages of .NetCF 3.5 I downloaded contained modules for the main .exe and some .dlls as well as just files for other .dlls. I assume this has something to do with memory locations and using modules instead of files, however I have never got my head around this
Anyway I recooked my ROM by using the extracted files from a .NetCF 3.5 .cab I downloaded and it worked. I assume there are benefits from using OEM packages that have modules instead of the files, however I couldn't find one that would work.
I also have SQLCE 3.5 integrated into my ROM.
HTH
Andy
well, as far as .NET CF 3.5 goes, I would use the OEM package here: http://rapidshare.com/files/75044332/NETCF_3.5_OEM.zip.html. It's the only one I've tried that completely works
As far as SQLCE, I use the one posted in this thread: http://forum.xda-developers.com/showthread.php?t=421821, because I use Beejive and it does not work with SQLCE 3.5
just my suggestions
good luck cooking!
I figured it out by leaving sqlcese30.sys.dll from original ROM, removed folders SqlCeMobile SqlCeMobile_Lang_* (for me SqlCeMobile_Lang_0405) and replaced them by 3.5 version. Everithing works OK now.
I started this thread because I've found many same threads here... But no solution.
N3o21 said:
I figured it out by leaving sqlcese30.sys.dll from original ROM, removed folders SqlCeMobile SqlCeMobile_Lang_* (for me SqlCeMobile_Lang_0405) and replaced them by 3.5 version. Everithing works OK now.
I started this thread because I've found many same threads here... But no solution.
Click to expand...
Click to collapse
Can you explain to me how you did it? I've got this file - NETCF_3.5_OEM.zip
And what is next?
Thank you!
hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback
wow, this week we've got a bunch of new chefs
congratulations mate
Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.
welcome new chef....
man am i glad i have a kaiser...
umm...maybe u should have reserved some posts?
vcespon said:
Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.
Click to expand...
Click to collapse
Because he take it and sharing for everyone,however....i think that is WM6.0.
this night I update all information.
the rom is wm6.1
I had a kaiser from 2 year...never tried a fast ROM like the mine! please verify if i do something wrong.
do you understand wath you must do for had my rom??
flash rom - flash radio - execute the file mattes1o.exe from kaiser
it's a "new" way to upgrade rom features without flash...
I'm here for all!
what exactly does mattes1o.exe do?
installs pharm Parn, lol kidding, Congrats dude on the first release
Peace,
Josh
mbarvian said:
what exactly does mattes1o.exe do?
Click to expand...
Click to collapse
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe
Andre_Santarell said:
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe
Click to expand...
Click to collapse
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?
You would un-install them like regular CABs I think. As in going to Start/Settings/System/Remove Programs.
mbarvian said:
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?
Click to expand...
Click to collapse
if I not include you can unistall programs as you want, and I can modify ROM without use the ROMkitchen
kaiserii101 said:
you would un-install them like regular cabs i think. As in going to start/settings/system/remove programs.
Click to expand...
Click to collapse
exactly...as you like!!
Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.
stylez said:
Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.
Click to expand...
Click to collapse
HI
I create a base ugly rom ultra light, then I modify all rom with programs and skins, I make a backup of my work with sbp backup 2.0 that create an .exe file.
then if you want my work you must flash my rom(ugly and light) and then run my backup file that automatically install all...YOU DON'T DO NOTTHING ELSE
Andre_Santarell said:
hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback
Click to expand...
Click to collapse
U telling me you can overclock the cpu?
apatcas said:
U telling me you can overclock the cpu?
Click to expand...
Click to collapse
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532
Andre_Santarell said:
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532
Click to expand...
Click to collapse
I thought this was debated before and concluded as making your Kaiser not very stable??
biscuits1978 said:
I thought this was debated before and concluded as making your Kaiser not very stable??
Click to expand...
Click to collapse
it was and i've tried it on MANY roms and can't tell it makes any difference other than taking up space
Hey....congrats!!!!!......um......anyone tried the new rom yet? And how's the speed?....fast I hope!!