Hi
I use Dr. Martins perfectly rom 6.1 1.1 and the Maniac's Automatic Keylock 4.03 and that works perfectly for me.
But now I have some situations I would like not only lock the keypad however the whole device with the device-lock function and a password.
Is there a way to set a shortcut on a key for the device-lock function like the red key for the keylock?
Thx
Wayne
Related
First off-- great job on the ROM. I appreciate your hard work as much as anyone. It generally works great on my SDA.
That said, could you please remove Automatic keyLock 3.9 beta 10 from your next revision? It is a nice program, but should probably remain in the Extras package. My company uses Goodlink for pushing exchange email to Windows mobile. Goodlink enforces keylock control on our devices and cannot be disabled. I am having strange issues happen with the keyboard and backlight. I think these are happening due to a conflict between auto keylock and goodlink. In some cases the keyboard just stops working. The only keys that will take input are the left and right soft keys. In addition, the backlight sometimes refuses to come on after, key press, OR it just blanks out while I am in the middle of something. In both cases the only way to get it back, is to reboot the phone. I have tried the adjusting the DisableLightWorkaround key, but it had no effect.
Thanks!
Just delete keylock.lnk from /windows/startup, you can do it even from pc thru AS if your keyboard locks... and then keylock won't matter to you
thanks. that is the 1st thing i tried. unfortunately, it seems like keylock makes reg changes even if the program is not active. i could be wrong, but i haven't had this problem with any other rom (wm5
or wm6). this is the only rom i have tried that had auto keylock pre-loaded.
Hi, i searching and trying several (dockware, Jgui Vista Interface, Riverland) software tools but all of them are working not perfectly.
dockware: works at external power source but not a battery
Jgui: after a time the S710 goes into lock mode (either the power settings are disabled) and JGui must restartet again
Riverland: nice to see but the same problem with the lock mode
Does someone have a solution? Running at external and battery mode and displaying the date and time at the screen; un-locked via a key or input method.
Thanks in advance!
If you wanna a clock just install CLOCKONTOP
ClockonTop
Thanks for your tip. But ClockonTop works only at the 2nd screen at my S710 after unlocking it. It doesn´t display the time at top at the main screen. Also SPShell Clock as Plugin didn´t fit quite well at the Facade gui.
Use Automatic Keylock it works for me without any problems and it is freeware. You can find it here http://maniac.fschreiner.de/.
Hi All,
I have been trying to get japanese input working on my Raphael, and have run into some problems. Here's what I have done:
1. Installed LesJapanNo6 - all working/tested no problems
soft reset
2. Installed IME_31J_QVGA_F file
soft reset
-> manila.exe error, device.exe error, and another exe error (can't remember now - think it was TouchFlo3d related). Hardware keys dead.
3. Made the registry edit to get hardware keys working
soft reset (note, regional settings still Japanese)
After that, every time I would try and input something, or change the input method, I get ongoing crashes in device.exe (until I closed the kayboard).
I then decided to change the regional setting back to English (UK), and then soft reset. Now it starts with no errors, but input is stuck on hiragana and the keyboard icon has disappeared so no standard romaji input.
I think I now have to install the enable_ime_2 and/or enable_ime_3 cabs, but am paranoid I have already done something wrong (crashes etc from step 2). Can anyone more experienced hint at the final steps to get this all working?
Thanks,
Raj
The steps you have above should work fine, but use the VGA version:
http://rapidshare.com/files/159514259/IME_31J_F.cab.html
You might need to go ahead and hard reset before you try again.
Just for reference, I have LetsJapanNo6 and IME_31J_F on my Raphael 1.90.405.1 WWE (UK stock ROM), with the following reg tweaks applied:
Code:
[HKCU\Keyboard Layout\Preload]
default = "E0010411"
[HKCU\Keyboard Layout\Preload\1]
default = "E0010411"
[HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME]
Option3 = "D"
[HKLM\System\CurrentControlSet\Control\Layouts\e0010411]
Keyboard Layout = "00000409"
Word of caution: when you go to edit the reg values, highlight the text and write over it; don't use the backspace key, because for some reason it inserts a lot of garbled text. Once you've saved the reg edits and soft-reset, the backspace key functions as normal again.
Also consider using PQzII to map keycode 0xE6 to IME; this will allow you to press the SYM key on the hardware keyboard to toggle between ascii (A→a) and kana (A→あ) input.
Other known issues: JP IME breaks T9/word suggestion, some other minor oddities.
SoftBank is releasing its version of the Raphael, so be on the lookout for a native JP ROM (which will have everything set up correctly) in the future.
Working perfectly now, fantastic!!!
Thanks!!!
I tried to map the SYM button to IME. But there is no way for me to specify 0xE6 in the IME menu.
is the new Raphael PQzII different?
aquasesh said:
I tried to map the SYM button to IME. But there is no way for me to specify 0xE6 in the IME menu.
is the new Raphael PQzII different?
Click to expand...
Click to collapse
I typed it in.
I'm using 008e1, but the latest e2 should be fine.
I have had this working for about a month now but was wondering how to get a keyboard shortcut to switch the kana/romanji input. This works perfect.. thanks!!!
thanks!!!
just a shot question:
as I use the hw-kb of my xperia for inputting text, it would be cool to have the tegaki-kb as standard one. Whenever I set it in Windows Mobile-Settings, it gets switched back to romaji-kb on restart.
is there a reg-hack for this?
would greatly appreciate your help!!!
ttkman said:
just a shot question:
as I use the hw-kb of my xperia for inputting text, it would be cool to have the tegaki-kb as standard one. Whenever I set it in Windows Mobile-Settings, it gets switched back to romaji-kb on restart.
is there a reg-hack for this?
would greatly appreciate your help!!!
Click to expand...
Click to collapse
It might be a problem with Xperia Panels resetting it to romaji-kb (TouchFlo3D does the same thing on the Touch Pro).
If you use PQzII, you can configure it to override the default input panel. You can even specify different default panels for portrait and landscape. Just open up the setup program (PQzII_Setup) and the settings is on the first page.
nevermind, got everything working!
thanks!
Hi guys,
I really tried to find it out on my own first, but it seems that Im not skilled enough to do that.
After installation of S2U2 everything is working flawlessly. After some (set) period of time, s2u2 will lock screen correctly. Even power button will lock device using s2u2 application. But that damn "lock" button in startmenu will lock screen with classic WM lockscreen. I know it is not some bug and its normal, but question is:
1. Is there any way how to remap even lock button to s2u2 application?
2. Or, is there any way how to disable this button and make it invisible?
Solution for first one would be awesome.
Thank you!
EDIT: Sorry for my bad english language.
Same here
+1 for this idea. I have the same problem, really annoying. After I've installed the" move slider to bottom" .cab and shortly after uninstalling this .cab I found out that the original default slider had been disabled and some kind of cheap unlock-button has came in place of the original slider. I couldn't get this original slider to work again so I've installed S2U2. But after installation and configuration of S2U2 I've noticed that the original slider also is active. In other words the S2U2 app is working perfectly, but is working simultaneously with the standard onlock button. (#@^%^$%)
How can I turn this off?!?
(edit: now the unlock button appears randomly and not every time I unlock the phone with S2U2. But it' s still annoying enough to want to have it disabled.) Anyone?
bramgg said:
+1 for this idea. I have the same problem, really annoying. After I've installed the" move slider to bottom" .cab and shortly after uninstalling this .cab I found out that the original default slider had been disabled and some kind of cheap unlock-button has came in place of the original slider. I couldn't get this original slider to work again so I've installed S2U2. But after installation and configuration of S2U2 I've noticed that the original slider also is active. In other words the S2U2 app is working perfectly, but is working simultaneously with the standard onlock button. (#@^%^$%)
How can I turn this off?!?
(edit: now the unlock button appears randomly and not every time I unlock the phone with S2U2. But it' s still annoying enough to want to have it disabled.) Anyone?
Click to expand...
Click to collapse
Well, its little different issue than I have in my mind, but it was same on my device. I have found solution for your issue in S2U2 FAQs:
Q. How to disable the WM6.5 built-in lock?
A. http://forum.xda-developers.com/showpost.php?p=4996782&postcount=2961
First install cab from that link and then install S2U2. Issue with double lockscreen (first s2u2 and after unlock present second standard WM locksreen) should dissapear.
BUT, if you click on "Lock" button in startmenu. Device will be locked with standard WM locksreen not S2u2.
NOTE That phone power button and time-lock are working with S2U2 perfectly... I just want to remap event this button for S2U2.
I'm looking exactly for the same functionnality!
Good idea
Anybody got a trick to map or hide this "unlock" button?
+1 i like this function too
Sanojek said:
Hi guys,
I really tried to find it out on my own first, but it seems that Im not skilled enough to do that.
After installation of S2U2 everything is working flawlessly. After some (set) period of time, s2u2 will lock screen correctly. Even power button will lock device using s2u2 application. But that damn "lock" button in startmenu will lock screen with classic WM lockscreen. I know it is not some bug and its normal, but question is:
1. Is there any way how to remap even lock button to s2u2 application?
2. Or, is there any way how to disable this button and make it invisible?
Solution for first one would be awesome.
Thank you!
EDIT: Sorry for my bad english language.
Click to expand...
Click to collapse
the new version of s2u2, 2.30, does that for you, remaps the lock button inside the start menu to s2u2.
Hi everybody,
We're using a Motorolo MC75 device running under WM 6.5.3.
We want to avoid users to use tmail.exe or poutlook.exe which has been done by using the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\DisallowRun registry key and this works really fine.
Now, we added the use of the default lock screen (included in WM) and clicking on the "Contacts" button or the "Appointments" button after entering the right pin code allow the final user to access the appointment functionality.
Do you have a trick / Hack / workaround to bear the launch of theses functionnality ?
For information, we've faced the same issue using the pin code from Afaria (Sybase)
Thanks for your help