i flashed it to PVTemp after i was stuck in boot loader screen, and now i tried to hardSPL again,
but the damn SPL wont update!!!
it's NOT 2.G4.4PDA, its still 2.20.0001 !
what should I do???
why hardSPL batch(which i think is jumpSpl) isnt functioning ?
i know jumpspl should do the job, but spl is not updated,,,
what am I doing wrong???
thom_yorke said:
i flashed it to PVTemp after i was stuck in boot loader screen, and now i tried to hardSPL again,
but the damn SPL wont update!!!
it's NOT 2.G4.4PDA, its still 2.20.0001 !
what should I do???
why hardSPL batch(which i think is jumpSpl) isnt functioning ?
i know jumpspl should do the job, but spl is not updated,,,
what am I doing wrong???
Click to expand...
Click to collapse
I have same problem...
WORKED!!!
finally!!!
it worked!!!
after i flashed PVTemp, i tried hardspl, the spl on boot screen didnt change
I flashed the new rom any way!!!
it worked!!!!!!!!!!!
i dono why,
i thought it should be 2.G4.4PDA before u can flash the new rom, bleave me all the guide threads said so!
I think hardSPL should change spl, and what i did was softSpl
here can i find spl 1.06 or older
cRaZyzMaN said:
here can i find spl 1.06 or older
Click to expand...
Click to collapse
flash NVID, then you will get what you want! :
here is that i already search and i can't find it
cRaZyzMaN said:
here is that i already search and i can't find it
Click to expand...
Click to collapse
go here...... post 1
http://forum.xda-developers.com/showthread.php?t=353547
i have a charmer not a prophet...
cRaZyzMaN said:
i have a charmer not a prophet...
Click to expand...
Click to collapse
go for charmer from vlodeck then...
http://forum.xda-developers.com/showthread.php?t=323979&highlight=nvid
Related
hI!! i just want to ask, do i have to execute hardspl everytime i change wm6 rom?
i have g4 device here. i think it is already hardsl because the spl ends with xxxolip. thanks masters!!
As long as the SPL version is *.olip, you don't need to run HardSPL again.
thanks! if that's so, i will just run the Rom Upgrade Utility directly right? btw,are the roms posted here safe for G4?
As soon as you are using HardSPL/SoftSPL, any ROMs that doesn't include IPL and SPL are safe to flash (All WM6 ROMs here should be safe, of course)
well one thing u have to find the ruu mun that will let u flash any rom and make sure about ipl spl and should be fine
ph03n1x said:
well one thing u have to find the ruu mun that will let u flash any rom and make sure about ipl spl and should be fine
Click to expand...
Click to collapse
ok sir!!!! so i will just straightly run the mun's RUU with the rom to flash it into my G4? no need to use shelltool?
hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom
so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL
and now that i've flashed the new rom, i cant hardSPL again,,,,
I'm so stuck,
i guess i should flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz
IPL 2.20.0001
SPL 2.20.0001
tnx
thom_yorke said:
hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom
so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL
and now that i've flashed the new rom, i cant hardSPL again,,,,
I'm so stuck,
i guess i should flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz
IPL 2.20.0001
SPL 2.20.0001
tnx
Click to expand...
Click to collapse
are you alright now????
hardSPL wont change the SPL
i flashed it to PVTemp, and try to hardSPL again,
but the damn SPL wont change!!!
it's NOT 2.G4.4PDA, its still 2.20.0001 .
what should I do???
why hardSPL batch isnt functioning ?
WORKED!!!
finally!!!
it worked!!!
after i flashed PVTemp, i tried hardspl the spl on boot screen didnt change
I flashed the new rom any way!!!
it worked!!!!!!!!!!!
i dono why,
i thought it should be 2.G4.4PDA before u can flash the new rom, bleave me all the guide threads said so!
I think hardSPL should change spl, and what i did was softSpl
thom_yorke said:
finally!!!
it worked!!!
after i flashed PVTemp, i tried hardspl the spl on boot screen didnt change
I flashed the new rom any way!!!
it worked!!!!!!!!!!!
i dono why,
i thought it should be 2.G4.4PDA before u can flash the new rom, bleave me all the guide threads said so!
I think hardSPL should change spl, and what i did was softSpl
Click to expand...
Click to collapse
how can it works?
beause my 818pro G3 just show the bootloader screen,can't boot in os.
when power on,show.
ipl 2.20
spl 1.00.0000
os 2.20.7.34
how can i update the spl to 2.xx.xxxx
fro9let said:
beause my 818pro G3 just show the bootloader screen,can't boot in os.
when power on,show.
ipl 2.20
spl 1.00.0000
os 2.20.7.34
how can i update the spl to 2.xx.xxxx
Click to expand...
Click to collapse
Flash this one
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
then you will get what you want ( WM5 rom with SPL 2.xx), then you may upgrade to wm6 easily
dioxda2 said:
Flash this one
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
then you will get what you want ( WM5 rom with SPL 2.xx), then you may upgrade to wm6 easily
Click to expand...
Click to collapse
Hi, dioxda
thank you!
Hi
I update that rom, but still show the bootloader, can't boot in os.
show:
IPL 2.20
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
Qtek
fro9let said:
Hi
I update that rom, but still show the bootloader, can't boot in os.
show:
IPL 2.20
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
Qtek
Click to expand...
Click to collapse
flash 1d, go to my lazt too thread @ my signature..
FORCE BOOTLOADER MANUALLY.....................
fro9let said:
Hi
I update that rom, but still show the bootloader, can't boot in os.
show:
IPL 2.20
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
Qtek
Click to expand...
Click to collapse
YOU NEED FLASH THE HARDSPL
OR
flash 1d, go to my lazt too thread @ my signature..
FORCE BOOTLOADER MANUALLY.....................
good news
My problem is solved,
Hi, dioxda2
Thank you very much.
haha, I love you
The update of my radio from SD ends without error but when i do the soft reset i see that the phone has the old radio rom.
The update of the S.O. works (i switched from WM 6 to WM 6.1).
Any suggestions?
thanks in advance
peterone said:
The update of my radio from SD ends without error but when i do the soft reset i see that the phone has the old radio rom.
The update of the S.O. works (i switched from WM 6 to WM 6.1).
Any suggestions?
thanks in advance
Click to expand...
Click to collapse
What radio do you have?
peterone said:
The update of my radio from SD ends without error but when i do the soft reset i see that the phone has the old radio rom.
The update of the S.O. works (i switched from WM 6 to WM 6.1).
Any suggestions?
thanks in advance
Click to expand...
Click to collapse
Are you still using the OEM rom or is it a custom rom? Flashing a new radio is the same as flashing a new rom. You cannot just flash any radio to your OEM rom without flashing HardSpl first.Read here:http://forum.xda-developers.com/showthread.php?t=393182
the original radio is 1.65.17.10
peterone said:
the original radio is 1.65.17.10
Click to expand...
Click to collapse
denco7 is correct! Have you Hard-Spl'ed yet!
I am using a custom ROM (udK 8.0 R2 vega) after flashing HardSpl
I HardSpl'ed twice: the first I flashed HardSpl 1.39 (used to install the udK 8.0 R2 vega) and then I tried reflashing HardSpl 3.29 (I reflashed both the s.o. rom ans the radio rom but the radio don't update)
peterone said:
I am using a custom ROM (udK 8.0 R2 vega) after flashing HardSpl
Click to expand...
Click to collapse
Have you tried flashing the radio through Active Sync (computer) instead of SD?
Ok maybe thats the issue! When you tried to reflash Hard3.29 did you jump-spl again? anytime you flash a Hard spl you need to use jump spl again! Maybe reflash Hard 3.29 again and jump spl this time!You only need to Hard Spl once ever, you dont need to do it everytime you flash something!
ActiveSync don't work on my pc
peterone said:
the original radio is 1.65.17.10
Click to expand...
Click to collapse
Unfortunately you have flashed the radio from hell, It is a radio that interupts Spl and flashes. Read this thread
http://forum.xda-developers.com/showthread.php?t=393337
denco7 said:
Unfortunately you have flashed the radio from hell, It is a radio that interupts Spl and flashes. Read this thread
http://forum.xda-developers.com/showthread.php?t=393337
Click to expand...
Click to collapse
Yep, just found that!
Hello.
I am just about to flash a new SPL onto this stock device - however i just read a guys post saying that he lost his 3g/Edge connection when he flashed his SPL which is the same as mine.
(http://forum.xda-developers.com/showthread.php?t=586163) - Nofrosts post
Is this a common error when you flash this SPL?
pixelkid said:
Hello.
I am just about to flash a new SPL onto this stock device - however i just read a guys post saying that he lost his 3g/Edge connection when he flashed his SPL which is the same as mine.
(http://forum.xda-developers.com/showthread.php?t=586163) - Nofrosts post
Is this a common error when you flash this SPL?
Click to expand...
Click to collapse
You can Flash it with no worries... All you have to do is use the goldcard method... Remember to backup your APN settings...
The 3g problem is to the Chilean magic related... But I found the solution to it...
You will not have the same problem...
:No-Frost: said:
You can Flash it with no worries... All you have to do is use the goldcard method... Remember to backup your APN settings...
The 3g problem is to the Chilean magic related... But I found the solution to it...
You will not have the same problem...
Click to expand...
Click to collapse
Thank you for the answer. May i ask, what SPL did you flash onto it? And did you create a recovery before or after the new SPL was applied?
pixelkid said:
Thank you for the answer. May i ask, what SPL did you flash onto it? And did you create a recovery before or after the new SPL was applied?
Click to expand...
Click to collapse
Hi pixelkid,
My Magic had the same (pefected) SPL and I've changed it with Amon_RA's goldcard method (I chose Engineerings SPL v1.33.2010). Everything works!
EDIT: With a perfected SPL, the recovery change can only be done after its change!
Hi. I also have 1.33.0014 and have successfully made a goldcard and put the eng 1.33.2010 on it (named sappimg.zip) it loads fine in Hboot but then it sais that the update is an older version so it won't let me. Any ideas?
My SPL is in my signature, but any ENG SPL should do the work...