i just got a Htc Tytn 2 vodafone version.
but i dont like the vodafone version.
I want to completely change it to the new Diamond version.
So my question is how to change the vodafone version to the diamond version.
could someone plz link me to the right thread with the downloads,what i need,and how too's. im new to this^^
thanks in advance.
Nefor somebody flame you for this question (because is already answered many times) start reading this :
http://forum.xda-developers.com/showthread.php?t=369282
and
http://forum.xda-developers.com/showthread.php?t=396922
And be shure to use HardSPL before you start flash your device.And after you understand what is hardSPL and you haveit on your device start read about Radio also wich version are for WM 6 and WM6.1
http://forum.xda-developers.com/showthread.php?t=393182
and
http://forum.xda-developers.com/showthread.php?t=349375
It depend from the region where you are wich is the best but you have to try.
Again READ before start playing
Being new doesn't entitle you to break forum etiquette.
Related
Hello to everybody,
anybody has got an official version of this rom or know a place to download it? I think a WWE version of that can be fine.
Thanks
pippopluto1970 said:
Hello to everybody,
anybody has got an official version of this rom or know a place to download it? I think a WWE version of that can be fine.
Thanks
Click to expand...
Click to collapse
WWE is World Wide Englisch correct me if im wrong
you can find the reconstructed t-mobile rom here:
http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
The Wiki is always your friend!
http://forum.xda-developers.com/showthread.php?t=369282 !!!!!!
Search and you will find everything you want to know about flashing roms etc.
steph
Yep that's right. Not only that T-Mobile didn't yet release 6.1 for the Vario III, they don't even provide any kind of an update for the old 6.0
Acoording to their regulations of course, you wouldn't need this ROM since you're not supposed to replace it anyway...
Stefan
T-Mobile vario 3 official rom
Can't use the reconstructed cause my hard-spl had a bad installation and my kaiser stucks in the boot mode , so only an original rom that doesn't check for country and vendor IDs can save me.
I don't need an update , but just any version installable on this device to let me install in the right way hard-spl.
In my Diamond the hard-spl installation was fine , I was unlucky with the kaiser , mtty commands can't help me , just proved.
pippopluto1970 said:
Can't use the reconstructed cause my hard-spl had a bad installation and my kaiser stucks in the boot mode , so only an original rom that doesn't check for country and vendor IDs can save me.
I don't need an update , but just any version installable on this device to let me install in the right way hard-spl.
In my Diamond the hard-spl installation was fine , I was unlucky with the kaiser , mtty commands can't help me , just proved.
Click to expand...
Click to collapse
The version you need doesn't exist...
edit: What's on the phone now? The normal SPL? But a cooked ROM??!!
Since that's impossible to my knowledge I assume that you are stuck in Bootloader with the normal SPL and the official ROM is still flashed but doesn't boot. If that's the case you might hypothetically (I'm not suggesting you do ;-) )try taking it to a T-Mobile store and tell them it just stopped working.
maybe you´ll find help in this thread:
http://forum.xda-developers.com/showthread.php?t=371154
or you can pm one of the masters...
Unfortunately I'm from Italy and there' re no T-mobile sellers in my country.
Normally I should not use that phone , taken from ebay at very cheap price.
I must be patient and wait for an update from tmo for the vario III ...
thanks to everybody
Hello.I bought a vodafone v1640 (1 hour ago.....so i am new ) italian.The gui who sod it said i can't put the wm6 on it but after all i read here it is possible.
It is written : rom version 1.30.106 ita,radio version 1.14.10, ext rom version 1.30.260 ita. I wish to put wm6 English version can you recommend me something and give me some instruction please?
Thanks in advance.
I also have a v1640, otherwise known as a Universal.
You certainly can load WM6 onto it, just not an official copy as that doesn't exist, but as there's no warranty to worry about so what.
Unforunantly many of those providing WM6 ROM's have moved onto newer toys..
At the moment your best bet is Tomal 8.2 (WM6.1) with a newer version being tested.
The most important thing is to read and learn before you do anything, but you've already got this far so you're halfway there.
Read the Wiki, make sure your 1640 is unlocked (supercid) and follow the instructions to upload the latest ROM. WM6 is so much better the WM5.
Happy tapping.
SSerpente said:
Hello.I bought a vodafone v1640 (1 hour ago.....so i am new ) italian.The gui who sod it said i can't put the wm6 on it but after all i read here it is possible.
It is written : rom version 1.30.106 ita,radio version 1.14.10, ext rom version 1.30.260 ita. I wish to put wm6 English version can you recommend me something and give me some instruction please?
Thanks in advance.
Click to expand...
Click to collapse
Welcome to the forum
Please READ the Wiki for further info on how to flas a new ROM
I personally recommend Tomal ROM´s specially v7.6
Good luck,
PREVIOUS COMMENTS:
Default Kaiser Rom???
Just got a Kaiser for ATT USA, i have it updated to the WM6.1 from ATT. But I'd really like to use on the cooked ROMs from this site. I've used a lot when I had a T-Mobile Wing.
Here is info on my phone
Rom Ver: 3.57.502.2 WWE
Radio: 1.65.21.18
What ROMs can I use?
NOTE: I'm still using T-Mobile and would like something that will work with the MMS and email...
NEW COMMENTS:
Maybe I should have worded that differently...
What I mean is that I am a new Kaiser owner, I do NOT know how to update the ROM, I took the suggestion at the end of my first post which was to read the Sticky's. I did that I followed different directions. HOWEVER, i can not get the hardSPL to update or install. So that is now my question. If that won't update, I won't be able to update my ROM???
Please do not make new threads when threads exist.
[Resources] Flashing Your First Kaiser Rom (For Noobs)
Follow guide any ?'s ask in the thread.
Closed.
You should put this post in the Kaiser General Question, cos more people will help you out then, i havent had my HTC TyTN II long and i followed the instructions from the stickies and everything worked, i installed hardspl without no problems whatsoever, so i dnt know whats going wrong with yours, normally when the phone starts up it should tell you which hardspl you have in red writing along with Radio version and Rom info, if you tried to install hardspl 3.29 and it worked then it will say that when the phone begins.
Dear Community,
i´m a new user and an informatican but i´m a newbie in flashing smartphones. So i can´t understand the following Problem:
I have a HTC Kaiser 130 from German Provider T-Mobile. Because this wonderful WM 6.0 is so extrem slowly i decided to flash my ROM to new WM6.5. I went to this forum because here you have the best xda-developers ;-) so now to my problem: After flashing (and i was doing it by the newbie flash tutorial!) in each WM6.5 ROM version i found here for Kaiser, i have NO Sound on my device. And when i try to make a call the connection will be established but the speaker and the mic doesn´t work. so what have i done wrong? can anybody help me? i really really don´t want to use the original ROM :-( i´m a power user and i will throw it out of the window when i have to work with 6.0 T-Mobile Brand anymore :-D
so many thanks!
I guess you forgot to flash your radio rom.
Try 1.70.19.09 so it will work.
hmm... sometimes i ask my self: HAVE I EVER BEEN TO SCHOOL? Or why CANT i read sometimes^^
i think exactly that is the problem
thank you very much
i try and hope
Never give up
Your answer is found very easily in the noob guides to flash the step is included and covered a million times in ROM threads.
Please search before posting a new thread and also post in correct sub forum.
Thankyou.
Thread closed.
Hi first time poster.
I am the proud owner of a HTC touch pro 2.
Ive been reading on this site about the different roms eg Manila but goodness im so confused, im not really that tech pro. In my settings screen it says "TouchFlo 3D 2.1.38158.2", after some reading on this site it seems to me thats the manila version. is that right? if so how do i upgrade it so i can use the custom themes and skins.
Also i have windows 6.1 on my device atm. should/can i flash it? If so what is the recommended rom to put on (if thats the right way to put it)
Thanks in advance.
pboy_
Welcome aboard
have a deep read here to learn hot to upgrade your ROM:
http://forum.xda-developers.com/showthread.php?t=550540
You can upgrade to wm6.5 if you want.
I can recommend Energy ROM´s
Leo= Manila 2.5 (slower for Rhodium)
Phoenix2= Manila 2.1 (better for Rhodium)
Good luck and enjoy!
thank you so much for your reply.
I just flashed my fone with hardspl but have yet to install a rom.
should i (do i have to) update my wm6.1 to wm6.5 to use the Energyroms?
i guess another way to put that question is, is it worth installing roms on my 6.1 or is it just simply better and wiser to upgrade to 6.5 and then flash a rom?
Give it a try!
Don´t be afraid, if you follow instructions all should be ok
And if you don´t like 6.5 you can always move it back easy!
thank you so much for your replies.
I cant seem to locat.e an upgrade rom for my fone and ive searched these and other forums like crazy, ive googled everything, been on the HTC website i just cant seem to locate it.
Rom version : 1.19.707.2 (51489)
Rom Date: 06/22/09
Radio Version: 3.55.25.27
Protocol Version: 61.25t.25.19U
Thats the infromation on my fone. i put up a thread in another forum and they just showed me the google link for the search and closed the thread. The search didnt help at all. Does anyone know where i can find the update FOR THIS.
Thank you so much
Do a search for Energy ROM´s