Hello,
my friend has a MDA Vario III, what is locked to the T-Mobile Hungarian network. How can I unlock this device, and upgrade it's firmware?
Thank you!
Hello.
WTF is with the noobs today??? jeez just ONE hour ago another noob asked the EXACT same question which has ALREADAY been answered 129375132975 times.... TRY THE THREAD THAT'S CALLED "KAISER SIM UNLOCKER" instead of posting here and dirtying up our nice little message board... WTF
"They" will tell you to find it yourself.
piedone said:
Hello,
my friend has a MDA Vario III, what is locked to the T-Mobile Hungarian network. How can I unlock this device, and upgrade it's firmware?
Thank you!
Hello.
Click to expand...
Click to collapse
The best unlocker I have found is: Olipro.
You will also need a modern Hard SPL: jockyw2001
If your future ROM does not include a radio: AllTheWay
As an alternative, you can find it yourself.
hmm.. how long before this thread gets closed.
make an effort and we will gladly help. we r not here to spoon feed. atleast do some reading before posting out of respect for the board.
Related
Hey guys, just joined up with this forum. I just purchased the ATT 8525 today and hopefully it will be here in a few days. Is there anything that i should know more about this phone, besides specs and stuff? Anything that i should do when i get the phone? Any advice will be good.
Thanks
Welcome to xda! There is a wealth of information here for your phone. Before your next post:
1. Read the sticky at the top of the Hermes section regarding posting (trust me its for your own good)
2. Get VERY familiar with this section of the site:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
If I were you I would spend some serious time reading through the forums before you decide to do anything to your phone. It will definitiely help you in the long run. Good Luck!
hi and welcome
i'm not as familiar with the unit you have but i think it's also known as wizard....guyz, please feel free to correct me if i'm wrong here... but in any case, scroll down the main forum page and you should see the section dedicated to the wizard. from there you can browse around and check the extremely useful list of topics for the device.
cheers
No..see my signature. The 8525 is a Hermes. I have the same phone.
norwstman30, welcome to xda-devs!!!
please, please, please, please, search and read! everything you will run into IS on this forum and posting a question of what to do when your 8525 (hermes) freezes or drops calls.. etc will annoy the rest of us. The wiki has all you need to know, welcome to owning a great device!
i own the imate jasjam which is the same as the 8525 except its black and has a camera on the front. I'm on at&t aswell in austin, texas... hook 'em horns!
Hey, just joined, purchased the Softbank X01HT, and the person previously installed the english pack. Will definately read through the wiki first.
Just wanted to say hi!
hello, can my xda 2 be upgraded to wm6, if so, how do i do it? tnx
Before you get told off that you are noob who doesn't read or does a search, please do read and do a search.
Thank you.
No one else respond to this. Admins, please lock this thread otherwise we are just spreading the problem as this is the user's first post and its very unlikely he bothered to actually look up the info him\herself first.
Wow, talk about high and mighty..
Anyway...
I believe your device (XDA II) is a HTC Himalaya model. Check out this section:
http://forum.xda-developers.com/forumdisplay.php?f=243
It doesn't look good for WM6, but you might be able to upgrade to a slicker version of WM5.
I have a Qtek 9100 with wm5, when I start it up it reads:
Ipl 2.17.0001
Spl 2.17.0001
Gsm 02.07.10
Os 2.17.7.2
I would like to upgrade it to WM6 and maybe add some of the new features of the HTC touch. I love the wizard and refuse to give up the keyboard but would like to have some of the functionality of the touch. I can hack a pc just fine but have never messed around on a mobile before. I do not want to brick this thing. I have PHM registry editor installed on my wizard. I was hoping someone had a clear cut answer on how to upgrade my device to WM6 and install some cool apps along the way. I love reading the many posts on this great site, I have learned alot. If anyone can help out this newbie I would be forever grateful.
Read this thread: http://forum.xda-developers.com/showthread.php?t=298613
more questions
Thanks for the reply, I have determined that I have G4 unlocked model. Now the next question that I have is do I need to upgrade my existing rom before installing a WM6 rom. If not do you have any suggestions on which WM6 rom to install?
Did you mean CID Unlocked G4? If you are not sure then look for shell tool and follow some others in G4 forum.
I checked and it is CID unlocked, so my next question is which WM6 rom should I use? Does anyone know if the new "touch" applications will work on a g4 model? I have searched through the G4 postings and I have not found anything on this.
My idea
jeep_man said:
I checked and it is CID unlocked, so my next question is which WM6 rom should I use? Does anyone know if the new "touch" applications will work on a g4 model? I have searched through the G4 postings and I have not found anything on this.
Click to expand...
Click to collapse
I think NBD 7.4 is the best WM6 "touched" rom...
But I don't know if it's working on G4 wiz....
btw, look here: http://forum.xda-developers.com/showthread.php?t=311534
Ciao
Tommaso
G3 and G4 have nothing different apart from the boot chip. So it should work (I may be wrong but you can safely give a try).
jeep_man said:
I have a Qtek 9100 with wm5, when I start it up it reads:
Ipl 2.17.0001
Spl 2.17.0001
Gsm 02.07.10
Os 2.17.7.2
I would like to upgrade it to WM6 and maybe add some of the new features of the HTC touch. I love the wizard and refuse to give up the keyboard but would like to have some of the functionality of the touch. I can hack a pc just fine but have never messed around on a mobile before. I do not want to brick this thing. I have PHM registry editor installed on my wizard. I was hoping someone had a clear cut answer on how to upgrade my device to WM6 and install some cool apps along the way. I love reading the many posts on this great site, I have learned alot. If anyone can help out this newbie I would be forever grateful.
Click to expand...
Click to collapse
Read the wiki
Don't remember who shared this, but I thought it would be appropriate here:
The members of this forum are advanced users, and they are expecting this from other members too. Thus if you don't want to lose your face in front of the other members, I suggest you try to solve your problems yourself first, and then search on this forum and even on the whole internet, and if then you still couldn't solve your problem, the link 'Post reply' or the link 'New thread' on this forum are there for you...So you will be sure that the problem you couldn't solve, isn't just something explained before and other members of this forum won't laugh at you...
The members with very high post count will not always be able to help you out in the best way...It is very easy to post hundreds of replies every day, but it's much harder to post so many useful replies! Sometimes you will see a thread becoming very long, thanks to some users willing to thank someone over hundreds of time. Of course, it is very polite to thank someone that helped you out, but you will see that all those thank you and other useless post are making it very hard for you and other members to find the posts that really will help you out of your little problem...So, an other suggestion for you is that you only post what really matters, that way, you will very soon be so popular in this forum and on any other forum that you might get famous by a lot of people and a lot of people might even remember you every time they are using their Pocket PC...wouldn't that be great??!
So, now you got a little introduction to this forum I'm sure you will find out your way and make it to the 'Search' button just on top of every page on this forum. Then, a new world will open for you, you will be able to find tons of information, more than ten or twenty thread are just on the subject what you where asking for and you will see that while you are searching, you will very soon get a little frustrated to find more than ten times exactly the same instructions to solve your problem. I am sure, very soon we will see some replies from you asking other members to just use that little search link before posting a question that was solved ten times before on this forum...
Have a nice day, we hope you will be able to help us out too if we got some problem that you might be able to solve!!
right before i say anything please dont start flaming at me
i have not been on the smartphone/htc scene for like few months now but recently i smashed my kaiser II and orange supplied me a new one so theres like a simlock on it and of course i cant upgrade the software on it to orignal htc kaiser
i cannot remember what i did last time so ive forgotten it all all i remember is paying to unlock it n thats it so im realy lost ive tried reading but its totaly confusing me
all im askin for is a some links to where i can
a. take the sim lock thing off
b. and install a original kaiser rom so the orange system goes off it
thank you
shaji007 said:
right before i say anything please dont start flaming at me
i have not been on the smartphone/htc scene for like few months now but recently i smashed my kaiser II and orange supplied me a new one so theres like a simlock on it and of course i cant upgrade the software on it to orignal htc kaiser
i cannot remember what i did last time so ive forgotten it all all i remember is paying to unlock it n thats it so im realy lost ive tried reading but its totaly confusing me
all im askin for is a some links to where i can
a. take the sim lock thing off
b. and install a original kaiser rom so the orange system goes off it
thank you
Click to expand...
Click to collapse
Please spend some time to look. They are all over the place. If you don't have time to look then it cannot be that important... Why make people look for you?
Help
You really should read the 1st post on here it would answer all your questions. I am no tech but please dont annoy those that give so much time and effort to this site for the benefit of us all, just for the sake of 30mins reading. Good luck the answers are out there.
im sorry i just found out what ta do
its all coming back slowly again apologies
thanks for the pushes tho hehe
how about this !
http://forum.xda-developers.com/showthread.php?t=375583
OP had his (redundant) question answered, let's make sure this thread stays at the bottom.
Thread closed. (No fanfare...)
Hi Guys,
thanks for watching. DUe to some good roms of you i upgraded yesterday my qtek s200 to wm6. Now the i love the Gui of the TouchFlo 3D. How could i download and install it on my running device.
Du i need this hdsql (or whatever).
Yess i saw many rom here in the forum but none was like touchflo 3d espacially for the messaging keyboard. I want to get rid of my stylus pen. And i think this would be a good possibility.
Thanks in advance.
Cheers,
RonLion
it's can not work on prophet
Cos' ram is less
ah, ok.
But wm 6.1 prof is possible? do you know a good rom in english.
thanks. cheers,
Ronny
The forum is full of good 6.1 roms. Suggest u spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
colink said:
Hi
For the non experienced (with xda) this forum is very difficult to find information.
...
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Firts, I would like to ensure you that I am not flaming or anything like that.
But, I have to Agree with Colink, this is not a noobfriendly forum
I´ve just bought a S200 from a friend (I´ve been dreaming with it since 2006!) and was a very pleasent surprise to know that Prophet could run WM 6.1 (I like Touchflo 3d, but for me, is not necessary.)
So, just as Colink (I supose), I´ve spent the last week reading this forum...and XDA forum too. I´m very sure that everything i should (or even can) know about prophet, is here. There is no other place to search...
But, the volume of knowledge is so huge, that sometimes is even confuse to absorb it.
So, I agree with colink and ask, Is there any tutorial to upgrade my WM version?
I´m pretty sure that I´ll upgrade it with or without tutorial... but as since as theres so many "expert" around here and, they did so much to the whole forum... wouldn´t be hard to someone write a quick tutorial.
But, I hope you all understand, that what I´m doing here, and I supose colink too, is just searching at the best (probably) only place to find anything about our ppc... not been lazy, we are just afraid of screwing something.
Thanks!
Magliano
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
Colink, in response to your comments above you would have read the very good guides to upgrading such as these:
http://forum.xda-developers.com/showthread.php?t=405384 and http://forum.xda-developers.com/showthread.php?t=401326 and http://forum.xda-developers.com/showthread.php?t=353547.
When i did my first flash i started with this : http://forum.xda-developers.com/showthread.php?t=315016. I then Hardspl using the guides above. The info i read recomended this way, so i used it. You will also have read from the guides about using XP not Vista to flash and also ensuring you remove all devices from USB ports and turning off other comunication s/w. The guides also offer good info on what to do when it goes wrong. If you do flash 6.1 rom and it goes wrong, then you can revert back to 315016 thread (aku 2.2 rom) as the guides say, this wil get you device working again
This post gives you links to the guides and a list of Roms, although you should check for new ones also : http://forum.xda-developers.com/showthread.php?t=377545
The wiki is also useful : http://wiki.xda-developers.com/index.php?pagename=Prophet_Contributed_ROMs
Now i hope this is both useful to yourself and d.magliano. I know that too much info is always a head wrecker, but really the guides are very good.
Hi Timmymarsh
Thanks for the response and the guidance. I am currently reading through the links you gave.
Unfortunately in my haste, before reading your post I followed instructions for installing USPL.
I have just run start_uspl.exe on my orbit 1, after following instructions re- soft reset.
Phone is showing white screen asdescribed in tutorial
PDA ROM update utility has opened on xp laptop.
Instructed to conect via active sync.
Active sync cannot find device.
I have not touched phone and do not want to brick it.
Any guidance would be appreciated.
The phone is currently connected to the charger with white screen. I presume I will have to restart and hope for the best.
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
i'll try to help yoy
colink said:
Hi
I hope experienced forum member will not be offended by my response to timmymarsh
timmymarsh recommends:
"spend a little time reading then when u understand what u have to do, go and try some ROMS for yourself and learn"
I am a noob with xda, I have spent hours reading, and trying to learn. I am still not clear how to safely update my orbit 1 to wm6.1 with touchflo.
For the non experienced (with xda) this forum is very difficult to find information.
Virtually every post / tutorial uses technical terms which presume previoius knowledge of htc / xda firmware and upgrades.
I am not IT incompetent.
There are a number of iPhone forums which have very straightforward forums which guide the reasonably competent computer user to unlock iphone, upgrade firmware and software.
Is there a straightforward tutorial available in xda-developers to help me upgrade to wm6.1 with touchflo?
Thanks colink
Click to expand...
Click to collapse
(i'm sorry for my bad english), try this tutorial , it was good for me http://forum.pocketpcitalia.com/forum_posts.asp?TID=30766&PN=1
bye
colink said:
Secondly the first link you give in your reply is for 'Prophet' - do I need different instructions / aplications for Artemis / Orbit?
Thanks Colin
Click to expand...
Click to collapse
Colin, im not familiar with o2 branded stuff so excuse ignorance, but is the orbit not based on the touch cruise/polaris?
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
colink said:
hi
Sorry my fault, I believe the orbit is same as artemis p3300 & touch cruise. I thought I was posting in Artemis forum.
I presume your links are not relevant to my phot?
If you can guide me about my current White screen / no connection problem I would appreciate it.
Thanks colink
Click to expand...
Click to collapse
Colink, i thought it was touch cruise hardware and ****, thats not good!! You are correct in thinking that you cannot use the prophet section in flashing. If i were you, id goto the polaris section and read how to recover. HardSPL and flashing is more complex for the Polaris, i am waiting for official wm6.1 rom before i try any cooked ones on there. If you are lucky you can recover your device by removing the battery for at least 30 seconds and try and restart, but i do fear you may have bricked your device as the SPL is one of two parts that help load you OS (apols if my descriptions are basic, i dont want to confuse)
Read the Polaris section and look for help, if not ask, but you may get rude reply. Sorry i cant help more, as i have not tried on my touch cruise yet. Let me know what happens, pm me if you want
hi timmymarsh
Thanks for your guidance. The Polaris is the orbit 2. My orbit1 is the Artemis. Not sure if it has same complexeties as Polaris.
I will follow your guidance and let you know.
Colink
Colink,
Ignore my pm and goto here, i hope it helps (ps make sure you post in the right place in future and if u ask for help, make it clear your device and steps taken and donot criticise those who try to help, unlike some who post)
pm me and tell me how it goes!
http://forum.xda-developers.com/showthread.php?t=308242
Yes TouchFlo 3D works on S200
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
TouchFlow for P3400
Anyone having TouchFlow 3D for HTC P3400
Touchflo 3D on Asus P750
Whether TouchFlo 3D will work on Asus P750 ?
Bobyciline said:
Have a look there !!
http://www.youtube.com/watch?v=DWaGDTvwmmc&feature=related
Click to expand...
Click to collapse
Dude, this is not touchflo3D!! google it and you'll see. that is basic touchflo with htc cube and htc home.
sriyankar said:
Anyone having TouchFlow 3D for HTC P3400
Click to expand...
Click to collapse
Erm which forum are you in?
micrographics said:
Whether TouchFlo 3D will work on Asus P750 ?
Click to expand...
Click to collapse
wtf, this is prophet forum?