Hello!
I have a Qtek S200(Prophet), and I upgraded it to WM6.
But the speaker on the telephone is go wrong, so i have to
fix it, but i havent got the garranty.
Can anyone have an idea to do what to get back the warranty?
thanks a lot,
Snoopenz
Snoopenz said:
Hello!
I have a Qtek S200(Prophet), and I upgraded it to WM6.
But the speaker on the telephone is go wrong, so i have to
fix it, but i havent got the garranty.
Can anyone have an idea to do what to get back the warranty?
thanks a lot,
Snoopenz
Click to expand...
Click to collapse
Saying the same thing at least five times won't help!
Look at the wiki for the "list of original shipped ROMs" and then download a QTek ROM.
Related
Hi,
I am expecting my German XDA in the mail in the next few days.
I have been reading this forum for the past 2 weeks, and have tried to wade through all the great advice to educate myself on ROM upgrading issues. I would like to clarify that I understand this properly.
As I understand, in order to render my new XDA "O2-free" and customizable, not to mention english, I need to install a new ROM - probably the latest Imate ROM or maybe the PDAMobiz ROM.
Before I do this, should I Unlock the CID? From my reding, this will allow me to the install any ROM.
Is this an accurate understanding of everything involved?
Are there other better options to achieve my goal of a non-branded non-operator specific Jamin/Neo?
Is there a way to save my original German O2 ROM if it became necessary to return the unit for service?
I hope people do not object to thsi post. I know that it can be irritating when newbies post on topics which have already been discussed thoroughly. I have spent at least 2 weeks trying to educate myself on the procedures, and really would just like if some knowledgeable contributor could reassure me that I have not missed something obviuos.
Thanks,
Ronan
Check here
http://wiki.xda-developers.com/index.php?pagename=Prophet_Upgrades
I'm still updating the page, but its working fine for my dutch s200 (now english dopod rom)
Hi,
I tried to follow the steps as outlined, but when I get to teh first soft reset, the device locks, and I can do nothing with it!
Please tell me how to fix it. Can I use bootloader?
How?
Thanks,
Ronan
Crisis averted!
Got into bootloader and installed the dopod rom.
Ro
Dear Ro,
have you upgrated your PDA?
Can you write your procedure?
Best regards
Daniele
please, read this topic and tell me what you think about it...
http://forum.xda-developers.com/viewtopic.php?t=54878
I entered bootloader then used the Dopod ROM with the modified romupdateutility.
I have not tried anything else.
Does anyone know of a solution for us SPL 2.15.0001 users? We seem to be very restricted in options.
Ro
Please, can you write the links where it is possible to download this rom and all the necessary files?
Is there a way to save my original German O2 ROM if it became necessary to return the unit for service?
Click to expand...
Click to collapse
Here u get the official one from O2: http://www.o2online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/index.html?nidx=1
I just upgradet to the new dopod wwe one. No probs at all with my XDA Neo. Its just 5 days old, so no CDI-unlockin needed Then I also took the O2 bootscreen again, and it works...still :wink:
Is there a way to save my original German O2 ROM if it became necessary to return the unit for service?
Click to expand...
Click to collapse
Here u get the official one from O2: http://www.o2online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/index.html?nidx=1
I just upgradet to the new dopod wwe one. No probs at all with my XDA Neo. Its just 5 days old, so no CDI-unlockin needed Then I also took the O2 bootscreen again, and it works...still :wink:
Thanks dears,
I have updated it with Dopod rom......but now....how can I update to I-mate JAMin (italian) rom?
Does someone have an Idea to how do it?
Thanks, thanks, thanks
Daniele
Yes, you have to go to ftp.clubimate.com there you can find the JAMin ROM's and also you can choose the language you want.
As you know, first, you must CID unlock, then you can download your favorite ROM. Tell us your opinon after install it.
Does anyone knows where I can get a replacement keypad for my Qtek S200, because my send button isn't working, what stops me from upgrading to any ROM except for a RUU ROM for which I don't have to hardreset. Your help is always appreciated!
moederfietser
moederfietser said:
Does anyone knows where I can get a replacement keypad for my Qtek S200, because my send button isn't working, what stops me from upgrading to any ROM except for a RUU ROM for which I don't have to hardreset. Your help is always appreciated!
moederfietser
Click to expand...
Click to collapse
ebay has them
Here is an official Vox WM6 ROM, hope it helps rom maker to develop new rom for tornado.
http://www.dopodasia.com/download/RUU_Vox_DOPODASIA_WWE_1.19.707.3_4.1.13.37_02.83.90_Ship.exe
KevinSephiroth said:
I thought ClearType was only available on PPC??
Click to expand...
Click to collapse
It's possible to turn on ClearType on SP, I'm enjoying it on my Qtek 8310.
KevinSephiroth said:
Doposia? Dopod? Is it another name of HTC S710?
Click to expand...
Click to collapse
HTC uses Dopod as their brand in Asia. For example:
Dopod 577W = Qtek 8310
Dopod C500 = HTC S710 = SPV E650
flykthewiz said:
where is the rom from?
Click to expand...
Click to collapse
It's the lastest rom for Dopod C500, I got it from Dopod Asia.
KevinSephiroth said:
Well in fact i 'm a NoLife, I have no friends
I just wanted to know if it was available for S710 or no, not which HTC/Brand it was.
Thx anyway
Click to expand...
Click to collapse
It's available for S710 and E650, but you should cid unlock your phone first. BTW, it's English and Chinese duo-language supported.
It looks like the VOX is builded on same base as Tornado so it should work just flash it... did somebody try it?
You joking, Vox got 128M flash rom but Tornado only 64M.
moved to Vox.
Doen't work on qtek 8300
I get an update error message?
I can't get it to work on my qtek 8300
any ideas ?
Did anyone use this ROM upgrade yet? Care to post your findings?
I tried on a french E650 and got the "Invalid Vendor ID" error message. I'm looking how to CID unlock it.
bouaroudj said:
I get an update error message?
I can't get it to work on my qtek 8300
any ideas ?
Click to expand...
Click to collapse
this rom is not for your phone.
i flashed to this rom because i found my vox to be too slow for my liking. so far it seems stable. the only problem that i have encountered is that the overclocking program wont run now.
i had to cid unlock my device. i used imei-check.uk and all went well (after they made me send a copy of my license to verify who i am). the install went smooth. the device seems slightly quicker when switching screen orientation while in the messaging application. not fast, but a little quicker. my device would take several seconds before and sometimes it would freeze while doing this.
if i encounter any problems i will make note of it here.
Anyone try this with blackberry connect? Is this a new rom than what the htc vox (non-branded) shipped with?
it is a newer rom version than the one that shipped with my unbranded s710. i dont use the blackberry connect software, sorry
interesting. i hope someone will cook the rom, to make it available with all the must:
TCPMP, live messenger, etc
Right now I stay on my SFR S710 rom, as i debrand it with modaco ' s stuff, and customized it like i wanted.
We'll see what this rom as to offer.
ROM extract problems
Hi I tried to extract this ROM with imgfs tools but at the last step (the bin extract) i get this message :
unknown header type , FS_data_table??
May be the ROM is protected?
I just tried to flash my unbranded HTC Vox and I am getting the following:
ERROR [294]: INVALID VENDER ID
This is really weird, I thought unbranded phones were all CID unlocked? Is that erro because it is locked? I was hoping to load this up becase my vox is a little slow too, but mostly because I was hoping that it fixes the continous reboot problem with microsd card. I have tried to clear out the notifications and that hasn't fixed the reboot problem.
Any ideas?
hondaguy said:
i flashed to this rom because i found my vox to be too slow for my liking. so far it seems stable. the only problem that i have encountered is that the overclocking program wont run now.
i had to cid unlock my device. i used imei-check.uk and all went well (after they made me send a copy of my license to verify who i am). the install went smooth. the device seems slightly quicker when switching screen orientation while in the messaging application. not fast, but a little quicker. my device would take several seconds before and sometimes it would freeze while doing this.
if i encounter any problems i will make note of it here.
Click to expand...
Click to collapse
Damm, they want $38 to unlock the phone...what happened to those free CID unlockers on the older phones. Any way to do this for free? Hehehe. Do you like the new rom? Want to make sure it's worth it....
bluehanson said:
Here is an official Vox WM6 ROM, hope it helps rom maker to develop new rom for tornado.
http://www.dopodasia.com/download/RUU_Vox_DOPODASIA_WWE_1.19.707.3_4.1.13.37_02.83.90_Ship.exe
Click to expand...
Click to collapse
ER....Just thinking about it it's the real HTC S710(/VOX/Orange SPV E650 ) ROM? Right?
Not Tornado (C600?) ?
This one has all the stuff ready (Windows Live, etc) ?
Is there French inside? Or only English? I don't bother English, but I prefere French
hondaguy said:
the overclocking program wont run now.
Click to expand...
Click to collapse
OmapClock 0.2? Did you App-Unlock ?
i had to cid unlock my device. i used imei-check.uk and all went well (after they made me send a copy of my license to verify who i am).
Click to expand...
Click to collapse
What's that? Is it shareware or freeware?
I installed it. Working fine, miss the theme with small types though. The fonts look kind of big and crappy, i think maybe cleartype is not enabled but I can not figure out a way to turn it on.
I thought ClearType was only available on PPC??
where is the rom from?
bluehanson said:
Here is an official Vox WM6 ROM, hope it helps rom maker to develop new rom for tornado.
http://www.dopodasia.com/download/RUU_Vox_DOPODASIA_WWE_1.19.707.3_4.1.13.37_02.83.90_Ship.exe
Click to expand...
Click to collapse
@flykthewiz
it came from dopodasia.com ....
it's originally for dopod c500
Howsit peeps!
I wanna ask someone to guide me trough to upgrade my Samsung i600 to WM 6.1. (I sooo badly wanna do it!)
I upgraded a few ROM of different devices without any problems.
When i tried Nokser's first i600 release, i bricked my phone. I dunno what happened, but there was no radio. I gave it into a repair centre, and they had to replace PCB......... thats why im sceptical.
This is what i have:
Samsung i600 Stock WM6.0 ROM
PDA version:
i600UJCGJ3
Phone version
i600UJCGJ3
Eboot:
i600UJCGJ3
Windows Mobile 6 Standard:
CE OS 5.2.1437 (Build 17944.0.3.1)
Can someone please guide me here, if all this makes sence?
Thank you and its appreciated :-D
First:
Update I600 to WM6 and next update to my WM6.1
nokser said:
First:
Update I600 to WM6 and next update to my WM6.1
Click to expand...
Click to collapse
Hi there Nokser, my phone has WM6 on it already?
The last time i tried to flash your ROM, it would not boot past the "Ultra messaging" screen, and was stuck there.....
I tried the other way mentioned in that thread where i had to add the XXGG2 phone and boot thing, thats where my radio died.......
Can anyone comment on this?
(Heheheh, i dont wanna brick my device again..............lol)
just keep the stock 6.0. I upgraded a few times to 6.1 but it was too buggy and I really liked the card wheel.
phonexpert_alex said:
just keep the stock 6.0. I upgraded a few times to 6.1 but it was too buggy and I really liked the card wheel.
Click to expand...
Click to collapse
Heheheh!
I only use this as a secondary phone, i want the Sliding panel features......
I just dont want to brick my device again....
I wonder why the first upgrade did not work properly.....i did everything as said, and the phone then didt want to pass the "Ultra messaging" screen......
But if so, i will rather keep stock WM6.0, i hoe someone can point me into the right direction....
phonexpert_alex said:
just keep the stock 6.0. I upgraded a few times to 6.1 but it was too buggy and I really liked the card wheel.
Click to expand...
Click to collapse
Ooooooh, btw! I have the Card Wheel as a .cab file works on WM 6.1 Aswell ive heared. I dont take credit for this, i only found it with some hard Googling:
http://forum.xda-developers.com/showthread.php?t=410370&highlight=samsung+cardwheel
Yay!
I took a chance, and tried it again....
It worked
Thanks for all your help guys! I really wanted to do this, now im running Wm6.1!!!!
May I know how you solved the problem? mine is bricked at that screen also!
Hi , i broked my phone trying to upgrade it , now i just got the tricolored screen and i can upgraded to anything because the phone do not start the upgrading maybe for the SPL version.
So i was thinking to put the WM5 original in it.
If anyone know where i can find this ROM please help me.
Thanks in advance
May be here (not test)
http://www.megaupload.com/?d=ZSV5WF2C
k101d
Thanks so much, but i already fix it loading an official ROM of WM6 from palm
Thankss anyway and dling just for the record