Problem with MDA vario ROM Flashing - 8125, K-JAM, P4300, MDA Vario ROM Development

Hello, my Name ist Sascha from Germany.
I have a T-Mobile MDA Vario I.
I want flash the ROM to Windows Mobile 6.
I have read some Guides but when i flash the T-Mobile 2.26 rom my MDA Vario reboots direct after start the flash process.
I have the IPL 1.03 and the SPL 1.03.0000
My OS is 1.3.2.5
My CID lock and so else is not locked I think.
lokiwiz a running perfect.
I need help pls.
I make all steps in the guide but it don't work
My Guide:
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
greetz
Sascha

Download WST_4.2.2 tool and post the report it generates here,especially 'CID Action'.

Reading CID block...
Calculating CID block sum...
CID checksum: 57D82CFA
Decrypted stored sum: A76249634BBB5393
Decrypted calcd sum: A76249634BBB5393
Key index : 72 - Block index: 183
CIDkey: MODULESN
CID IMEI: 356381000126510
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
-----------------------------------------------------
Wizard Service Tool v4.2.2
28/05/08 14:07:39
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356381000126510
=> Bootloaders:
IPL: 1.03 (G3 device)
SPL: 1.03 (G3 device)
Built on Sep 29 2005 at 14:49:19
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio: 01.04.10
Protocol: 4.0.13.17
=>Extended_ROM:
Version: 1.3.2.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9eb472 - 10.00M (0xa00000)
2eae8ede - 48.23M (0x303c000)
afb2bf42 - 51.06M (0x3310000)
4fb2bd82 - 2.88M (0x2e0000)
8fb2bd5e - 3.06M (0x30fc00)
=> DOC chip unique ID:
0000000076110102033509bd100605e8
Key Index: 72
-------------------
I try to install the ROMs with Vista and XP. Both have the same Effect. Restart....
Errorcode 260.
The Active Sync Version is the 4.5 (the newest)
ok, i have the Solution.
I Must go in the Bootloader to Flash my MDA Vario ROms.

Related

shipped ROM of Vodafone VPA Compact s

shipped ROM of Vodafone VPA Compact s
I have made a ROM Backup/Dump of my new "Vodafone VPA Compact s" by using aWizard. --Original ROM of Vodafone.
For some one it concerns and interest.
I have made it in two versions: .nba ROM for aWizard or myOs flashing; .nbf version for RUU flashing. You can choose different methods freely.
1. .nba (.nb) ROM by using flashing tool "aWizard" or "myOS" for G4:
It includes: vodafone-HTCLogo, vodafone-OS, vodafone-Radio and vodafone-ExtROM. all in filetype ".nba".
You can flash this ROM by using Prophet-tools such as MyOS or awizard according to right steps.
Download Address:
Code:
http://fileho.com/download/930d48588908/vodafone-VPA-Compact-s-Shipped-ROM.rar.html
Mirrors:
1a).
Code:
http://www.megaupload.com/?d=HMLHJTT3
1b).
Code:
http://rapidshare.com/files/22598551/vodafone_VPA_Compact_s_Shipped_ROM.rar.html
2. .nbf ROM by using flashing tool "ROMUpdateUtility NovendorID" for G4: click ROMUpdateUtility_G4.exe and then step by step.
2a). RUU ROM for Vodafone VPA Compact s (without Ext_Rom, IPL/SPL), you can copy the your own Ext_rom (or download the original EXT_ROM version of Vodafone from my post above--Download & Unzip/Unrar it you will see) to your PPC\extended_Rom by using software "Total_Commander" and run manuelly.
DDL:
Code:
http://rapidshare.com/files/22623217/RUU_G4_for_Vodafone_VPA_Compact_s.exe.html
2b). Another original RUU ROM for Vodafone VPA Compact s (with Ext_Rom, OS, Radio/GSM, Splash,HTC Logo. Without IPL/SPL). You can config your own Ext_ROM by edit "config.txt" in file folder extended_Rom (Unlock & Unhide the Ext_rom first).
DDL:
Code:
http://fileho.com/download/2bfe31173626/RUU-G4-for-Vodafone-VPA-Compact-s.rar.html
For Backup & Emergency only, pls use it at your own risk!
YEAH MAN Thank YOU VERY MUCH
it was deleted though on the server already so could you upload it again on rapidshare or something?... thanks
Download URL updated!!!
This Rom:
http://rapidshare.com/files/22623217/RUU_G4_for_Vodafone_VPA_Compact_s.exe.html
crashes my phone i have to reupgrade to 2.20 in bootloader mode.
€: http://www.megaupload.com/?d=HMLHJTT3 works but i cant flash the splash and logo. How shall i do it? The logo file is empty (0 byte, has someone a backup?)
This is Windows Mobile 5, isn't it?
i instaled this rom and i bricked my ppc... can you try first what are you uploading??? and yes it would be nice if we have vodafone original software just in case we need to take it back to the service, because of waranty.. thanks, but can you provide working version???
hi can i flash this Rom 4 my Prophet
i have Vodafone in silver
Vodafone vpa compact 1 ger
hello my dear is there any english rom for Vodafone vpa compact 1 ger
rom vesion 1.12.01 GER
Radio version 1.12.00
protokoll version 1337.42
ExtRom-version 1.12.161 GER
Windows mobile 2003 se
CPU intel (R) PX272
416 MHZ
thank you ver much

Help with flashing

Hi, I am having some trouble tring to flash my Wizard(cingular 8125).
I'm following this thread http://forum.xda-developers.com/showthread.php?t=298613 but everying time I try to flash the wizard love rom, I keep getting the error 302. I even tried the button rom and the same thing happens. But it will let me flash the Cingular rom the the HTC site everytime I get stuck in boot loader mode.
So what am I doing wrong?
Which is your device A G3 or G4 ? What is it's IPL/SPL...?,download the WST tool and run to verify the DOC chip version of your phone.Post report here.
Cheers !
Have you applied Hard SPL before? And SIM / CID unlocked?
Regards,
Carty..
Hard SPL is only for G4 devices,what if he has a G3 device ? First,version of the phone has to be verified,only then any suggestion is appropriate !!!
Regards !
I have a G3. and I am Sim unlocked but not CID. My IPL/SPL are both 2.25
I'll download the WST Tool now.
Ok this is what I got from WST;
Wizard Service Tool v4.2.1
10/11/07 20:06:30
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378009849753
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
cfb7d5ea - 1.87G (0x77a60200)
0e9dc4a2 - 9.99M (0x9fd800)
0ea9b13a - 48.23M (0x303c000)
cfb23f92 - 50.95M (0x32f4000)
6fb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000296c0206350903db1c050606
Key Index: 80
All Done.
hmmm, Download the complete unlocking package from here,it includes all the things required to unlock:-
http://rapidshare.com/files/53377946...m_Unlocker.rar
Good luck
here is the proper link for everything you need to unlock the wizard,it includes lokiwiz(all versions),button rom,original o2 uk rom
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
password is scousemartin
for the rar file to extract

HTC Touch Flashing Help Needed

I'm thinking about flashing my Touch for a week now, but i'm kinda scared. So I had to ask these probably silly questions for most of you, but.. if I do something wrong, how much can that damage my phone and is there any way back from there? I already did a backup of my existing rom so can i use that backup in case i screw things up? what are Cert_SPCS.cab and EnableRapi.cab and do they have to be run before flashing? (they were mentioned in the readme.txt file that was included with the tools i downloaded to backup my rom from this page http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom ) How can i know if i should CID unlock my phone or not? I guess that's all for now Тhanks!
Here is some info i got for my device, so you can have the whole picture:
Touch version : Elf
Device ID : ELF030000
CID : T-MOBL11
IPL : 1.13.0002
SPL : 1.13.0000
ROM Version : 1.13.121.2
ExtROM Version : 1.13.121.102
Operator Version: None
AKU Version : 0.2.3
Page Pool : 8 MB
RAM Size : 64 MB
ROM Size : 128 MB
Model No. : ELF0301

Downgrade and clean

Hi all,
I'm being trying since a long time to have a clean wm6.5 but the touchscreen doesn't work.
I try to downgrade and ive downloaded a fresh original rom from orange but the software upgrading says its not the good device :/
Code:
Wizard Service Tool v4.2.2
23/02/10 04:15:09
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004178073
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: Unknown
ROM: Unknown
Registry AKU: .5.3.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9ad266 - 9.99M (0x9fd800)
2ea8f8a6 - 43.24M (0x2b3e000)
ceb239be - 50.13M (0x3220000)
6eb237ee - 2.94M (0x2f0000)
8eb2379a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000e1170109003a05c70605066a
Key Index: 20
I dont know what i need to do, there are so many tools and tutorials, i'm lost...
You need to remove the hard SPL first, then flash the original ROM.

[Q] P3450 HTC Touch - Fails when SIM card introduced

Device is just looping on start up with the sim in, when I remove the device works OK, I have upgraded ROM, SPL etc but still get the same problem - can anyone tell me if it;s a software or hardware problem please?
Current device details:-
HTC Touch device information - by dsixda
Touch version : Elfin
Device ID : ELF010050
CID : HTC__001
IPL : 2.11.1002
SPL : 3.10.cmonex (Hard SPL)
ROM Version : 3.14.706.02
ExtROM Version : Cooked by dsixda
Operator Version: Onyx Ultimate 4.11
AKU Version : 1.6.10
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0300
Part Number : 99HEH039-00
SIM Unlock Code : 20754629
MCC+MNC :

Categories

Resources