Hello,
I have been messing around with Manila editor and I seem to have done something wrong with one of the files.
Can anyone send me the "7d3f1247_manila" file pls?
It's the picture of Web Browser in the Internet tab. It doesn't show anymore although I'm not sure why. The only thing I did was desaturate the picture - works with all the other icons/pictures.
Anyway, if anyone could post the file it would be great.
Or perhaps send it to [email protected].
Thanks in advance.
Anybody? It's just one file...
Best way to get it back is to switch off the today plugin in settings, then use total commander or resco to delete the file that you replaced in Windows and then reset your device. The deleted file will be restored from the ROM once the device starts back
Hmmm, I didn't know that. Thanks for the info, I'm going to try it right now...
dear all!!!
really it's so hard to restore many pimbackup.pib files on a device...
i have been searching for an extracor, or kind of emulator that alow me to view the backuped file on my pc...
thankyou
best regards...
moiisse
If I remember correctly, you can rename the .PIB file as a .ZIP and then look at it with your "favourite archive tool".... Within the ZIP/PIB file there are loads of CSV format files for each of the messages/contacts/phone logs etc.
The only problem may/might/will be if you did the PIM backup in binary format; your best bet would be to post on the PIMbackup thread (here) and see if Dotfred or anyone else can help
Cheers,
Mark.
Dear Mark
I have tried this trick but the files I got were not .CSV one some other extension files. I am afraid if I am doing anything wrong.
The extension is not .CSV, but they are in CSV format. If you rename them to .CSV and open them with Microsoft Excel or Openoffice Calc (or whatever), they can be imported as semicolon delimited files (so strictly speaking, they're SSV - "Semicolon Separated Values" rather than CSV )
Hope that helps,
Mark.
That was a great tip!
Any idea how to import these into an Android Phone - just got an HTC Hero today. Took a backup of my existing contacts, sms etc from WM6.5 (HTC Touch HD) and could see the .pib (renamed as .zip) and individual files (which I renamed as .csv)..
Guess there might be a simple trick to restore them as well in HTC Hero?
I think I may have found something........
sam_htc_touch said:
Any idea how to import these into an Android Phone - just got an HTC Hero today. Took a backup of my existing contacts, sms etc from WM6.5 (HTC Touch HD) and could see the .pib (renamed as .zip) and individual files (which I renamed as .csv)..
Guess there might be a simple trick to restore them as well in HTC Hero?
Click to expand...
Click to collapse
I was about to say I have no idea and I don't really care (about Android phones that is, not your problem getting your messages onto your Hero!), but then.......
I found this - Sprite Software's FREE (at the moment) migration software - which looks like the answer to your prayers
I've seen a report from someone who used it - apparently, it's pretty slow, but as it's a "one-time" transfer operation.....who cares how long "free" takes!!!???
Let us know how you get on - and post something in the Android-related forums so that other users can benefit.....
Cheers,
Mark.
(At times like this, I wish I had a Paypal "donate" button.....this gem of wisdom is surely worth a buck/quid/euro or two ....Ho hum!!!)
Excellent! That seems to be promising!
Just tried using that and tried to restore only the sms on my android, however it gave an error. Have emailed sprite software the relevant log file, lets see if they come up with the reason of failure. Guess it might have something to do with the threaded view on my win mob 6.5
PS : Paypal donate button shudn't be that difficult to get
And yes just thought that I would mention about the contacts - its actually very easy - just get them into csv file using the trick that you mentioned above and then import the csv file in gmail contacts! that's it! gmail automatically syncs the contacts thereafter!
Mark Crouch said:
I was about to say I have no idea and I don't really care (about Android phones that is, not your problem getting your messages onto your Hero!), but then.......
I found this - Sprite Software's FREE (at the moment) migration software - which looks like the answer to your prayers
I've seen a report from someone who used it - apparently, it's pretty slow, but as it's a "one-time" transfer operation.....who cares how long "free" takes!!!???
Let us know how you get on - and post something in the Android-related forums so that other users can benefit.....
Cheers,
Mark.
(At times like this, I wish I had a Paypal "donate" button.....this gem of wisdom is surely worth a buck/quid/euro or two ....Ho hum!!!)
Click to expand...
Click to collapse
Hi Mark (Am I Noob to Android)
It seems like, you have solved the issue here. I did have one question for you:
What if you allready had a PIM back of your old phone. Then the phone you have sold it. But you still the the PIM backup file on your SD card. Can you still go on to follow and start from 2 step and then step 3.
Or is the another way of doing this then?
Many Thanks.
yes u should be able too as long as the PIM file is on your SD card. you can just directly transfer it onto your PC, then rename it to a ZIP file and proceed as instructed above.
sam_htc_touch said:
Any idea how to import these into an Android Phone - just got an HTC Hero today. Took a backup of my existing contacts, sms etc from WM6.5 (HTC Touch HD) and could see the .pib (renamed as .zip) and individual files (which I renamed as .csv)..
Guess there might be a simple trick to restore them as well in HTC Hero?
Click to expand...
Click to collapse
tried it..
i just took the contacts.csv file ,tried to extract with gmail...
then
An unknown error occurred while importing your contacts.Learn more
.....oohhhh.....really needed help
Hello to everyone!
I had an HTC Touch HD and after a serious accident it's officially dead! I had a backup of contacts and messages to my sd card and i did what is described. I renamed it to .zip and i extracted it to my pc.. The result i get is files .pba, .pbl, .pbc, .pbx, .pbd and .pbt
Does anyone know what is all that and how i can use them in android phone????
please help me!
isovitis33 said:
Hello to everyone!
I had an HTC Touch HD and after a serious accident it's officially dead! I had a backup of contacts and messages to my sd card and i did what is described. I renamed it to .zip and i extracted it to my pc.. The result i get is files .pba, .pbl, .pbc, .pbx, .pbd and .pbt
Does anyone know what is all that and how i can use them in android phone????
please help me!
Click to expand...
Click to collapse
that is what I got also, I tried importing data to excel (with / without renaming to csv or ssv) but the text was not understandable in any language so I did not even proceed in selecting the separator and actually import the data.
Mr Black'd said:
that is what I got also, I tried importing data to excel (with / without renaming to csv or ssv) but the text was not understandable in any language so I did not even proceed in selecting the separator and actually import the data.
Click to expand...
Click to collapse
Come on guys read a little more on the web, if you would have done so you would have figured out you have the binary backup files, not the text file, so what you need to do is convert. Now if you press the search button for the forum you would have found this interesting link:
http://forum.xda-developers.com/showthread.php?t=424641
the title says: 'Convert PIM Backup binary file to text without using windows mobile device'
(considering yours broke like mine)
You can read there that you can convert it to a text file using an emulator on your pc and subsequentlyfollow the steps that were described here...
First of all what makes you think that none has bothered to use search button or at least Google the issue?
Second and last ok you have proved us stupid.
Anyway thanks for the link even though a late reply cause personally I have solved my issues.
Sent from my HTC HD2 using XDA app.
Hi guys. My TD2 seems to have stopped recognising zip files - or at least doesn't know what to do with them anymore.
Any ideas how to fix this?
Peace, Chris
How about "Pocketrar"? It's free!
Also "Total Commander", which is not only a better file manager than the standard one, but natively supports zip files, has a simple text editor, allows registry editing etc etc.
If you want to repair a broken file type association, like zip, quite a few simple configuration programs will do this.
Ok guys, thanks for those suggestions. I'm curious as to how the association got broken in the first place.
Have heard good things about Total Commander, will give it a shot.
Cheers.
Hello,
I'd like to ask for some expert help.
I finally managed to edit an EXE file from Windows - just translating Japanese text to English. I used the MEditor suite. After saving, I "dropped" the file onto the SignCode.exe as per instructions.
When I transferred the file to its original location and overwrote the original one, I get:
"Cannot open... A critical component is either missing or cannot start because program memory is unavailable...."
I am sure I didn't change anything else but texts. So what could be wrong?
I am attaching the two files - the original and the edited - for someone to please look at them and let me know if there's anything I can do. This is Sharp's Barcode Reader.exe
Thanks!
Hi,
So I have a VX6700 w/WM5 which the screen broke on yesterday. I was able to extract the contracts from the pim.vol file, however I do not see my SMS Messages. So here is my question and some of the directions I think this can go. I want to be able to extract the SMS Messages, but I have yet to find a file that they are located in nor hear anyone talk about where exactly.
So, is there db file I can grab and export
Or, is there a way I can run SMSBackup or another tool remotely on there? I can't see the screen but I can of course still communicate with it over the data cable, so if there was a program I could run remotely without needing to click on anything, I'm in the good. I don't really know much about WM but I think both of these should be possible.
Thanks!
Edit: so it looks like the cemail.vol file is what I need, but it is protected by the OS. And it looks like just about every tool I've came across needs to be ran on the phone, so I will likely need to be able to do some remote execution somehow.