Database Info

Original English JAM ROM from Club iMate

You will find the ROM here...:
http://www.clubimate.com/Support/ma_cdlsku2_arb_10300_141_10100_ship.exe
Note: ExtROM with Arabizer...
Best regards,,,

nice work thanx alot

ehh
is this a full rom? can i install it on my t-mobile ? and would it completly update my mda compact?
:shock:

Can some body get the password for the ROM files...

Hmmm…. Had no success yet getting out password to open Ms.nbf. But I found that we can upgrade Radio.nbf. So extract jam ROM to a folder delete Ms.nbf and NK.nbf and start Himaupdate.exe . The process of radio upgrade will appear. Anyway I installed the jam rom thru SD earlier. So finally I have radio updated. Lets wait until the password unlock, than it will be like before!

Nick-II said:
Hmmm…. Had no success yet getting out password to open Ms.nbf. But I found that we can upgrade Radio.nbf. So extract jam ROM to a folder delete Ms.nbf and NK.nbf and start Himaupdate.exe . The process of radio upgrade will appear. Anyway I installed the jam rom thru SD earlier. So finally I have radio updated. Lets wait until the password unlock, than it will be like before!
Click to expand...
Click to collapse
How did you update the MDA compact to a I-mate ? Witch ROM file ?
Cheers.....

Pinooo, I made it with jam.nb1 file that you can find on this site it was in forum Mda Compact from German to English. So there is all needed for update of MS and extended ROM and radio you will get from Official ROM see above how to do it.

how to use it ?

german rom from QTEK (Howto?! / Questions)

Hiho,
I have a Swisscom branded QTEK S200 atm running Dopod, but actually I'd like to install this:
GER_RUU_Prophet_215742_2157131_023021_QTEK.exe
But I get the Vendor ID Error and I didnt find a usefull way to trick it, should it be possible to install the ROM above?
Wheres the right Howto to remove that Vendor ID problem?
MY Qtek:
ROM: 2.15.13.27 WWE
ROM Date: 3/9/06
Radio: 02.19.21
Protocol: 4.1.23.09
ExtROM: 2.15.13.121
What is that with those G3 G4 chips, how do I find it out?
What else do you have to know to help me installing the ROM above?
How can I edit the registry, can I just connect with my regedit.exe on my computer to my qtek?
TIA!

Check the files on the ftp, i think there is a Update-Program that doesnt check the vendor ID.
And please upload the Rom
Edit:
http://forum.xda-developers.com/showthread.php?t=264509&highlight=vendor
http://forum.xda-developers.com/showthread.php?t=273114&highlight=vendor

Acutally I think I understand something wrong :-\
I want to upgrade my Qtek to the version I posted in that thread. But I get the error with the Vendor ID, mhh, ok.
The links u gave point to another ROM.
Erm, isnt that easy to understand...
Of course I'll upload as soon I get permission in the upload folder :\

As far as i understand the previous threads:
-Download the mentioned Rom with the NoVendorID Update Utility.
- then take your Rom you want to flash on your unit
- Proceed as described in the threads
Check www.phm.lu for a Registry editor on your device
You could upload to www.rapidshare.de ,then i would also try to upload to the ftp

Uploading it to radpidshare right now, will post link when done.
Mhh, so I downloaded that noVendor ID.
do I have to replace that nk.nbf? (extract it somehow from the exe installer I have?) or do I have to flash it twice?
1) with the noVendor rom
2) with my Qtek rom
sorry, i'm confused )

I would say (though i haven't done that before as i was also searching for the right rom) Unzip the novendorid rom and replace the .nbf file with the german qtek file.
At least worth a try

Mhh, there is the ROM:
http://rapidshare.de/files/34895878/GER_RUU_Prophet_215742_2157131_023021_QTEK.exe.html
Mhh, I'm wondering how to extract the .exe to get the *.nbf
Mhh....
If you have/want addme to msn: [email protected]
=)

Open the File with Winrar. You should be able to extract the files.
I do not use msn, sorry
BTW: Thank you for the ROM !

rom
ftp://xda:[email protected]_RUU_Prophet_215742_2157131_023021_QTEK.exe
the rom was already uploaded.

I know
It is the Rom Purp uploaded to rapidshare before.

I need a little clarity for the upgrade/downgrade process

Hi,
I have been on this site for about a week now. I was drawn here by the desire to take my Imate JamIn up to WM6.
So I pulled from the web the file:
RUU_Prophet_220734_2207114_024721_NVID_QTEK and hurled it onto my PDA
It went from Imate to QTEK but still worked pretty well. So I then went and loaded Upgrade Happy from a site in Roumania.
This loaded but was distinctly unimpressive and unstable so I managed to downgrade to the WM5 file above again.
Then I tried Smart1's v2 WM6 file and this went on OK. However, I have experienced a few issues with the battery and other things like Timewizard, etc.
So I have gone back to the NVID_QTEK WM5 file again.
BUT I would really like to put back on my Imate ROM which I have stored away. Sadly, whenever I try and load the ROM it states that the version is lower and I can only do an UPGRADE ( I get a 286 error).
I have searched here and Google and think that I can Un CID my phone (not actually sure what this does mind). I have read posts suggesting that once done I can load any version of any Prophet ROM on my PDA.
I went off and ended up on PDAMobiz and pulled down a file called:
PDAMobiz.com_ProphetAKU2_unlockCID.rar
But this site is incredibly slow and the file is corrupt when I finally get it down.
Can anyone explain to me whether it is possible to get to reload my earlier ROM version Imate ROM? If it is can anyone explain what I need to do and perhaps put up a link to an area where I can pull the tools down.
This website has a great reputation for helping each other out and I am sure that my ignorance will be forgiven,
Kind Regards,
Sam.

Hi
This is because you have upgraded your ipl/spl and these can't be downloaded.
But don't worry it's not a problem
if you have the original rom you should have a .nbf file?
You can use typho5.exe -x xxx.nbf (whatever it is called) this will extract the individual elements (ipl/spl/os/extrom/radio/splash screens) as .nb files.
Then use nb2nbf to build a new nbf file without spl/ipl parts. copy this file back to your backup folder (rename the original one first) and install again
Good Luck

Thanks - I have just a couple more dumb questions...
FlykThewiz,
Many thanks for your help.
I have the file:JAMin_WWE_213923_2139123_022021_shi.exe
Do you know how I get the .NBF out of it?
Also,
You couldn't point me to the tools you mention could you?
If I do what you said then do I get back my own Imate Splash screen too?
Do you know if I will suffer any problems with things being different versions?
Once again many thanks I will let you know how I get on.
Kind Regards,
Sam.

You can use winrar (free download - search google if you don't have it) to extract the files in your exe.
One of the file will be the nbf.
I will sort out the instructions for you but I have to go out for a couple of hours at the moment.

T H A N K Y O U
flykthewiz,
You are simply The MAN
Many, Many thanks,
Sam.

I don't know about being the man - i had the same problem myself.
Attached is a zip file with the two tools you need.
I suggest you create a folder called c:\rom and copy the contents of your exe file and these to programs into it.
goto a dos cmd window and cd \rom
type "typho5 -x nk.nbf" (no quotes)
you will then have a number of *.nb files in c:\rom
rename nk.nbf to nk.org
send me the list of nb files you have.
ZIPPED with winzip 12

Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks

Splash Screens
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
secoseco said:
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Click to expand...
Click to collapse

FlykTheWiz,
Thanks for the tools.
The files I have are as follows:
30/03/2007 13:50 59,768,832 80040000-OS_0.nb
30/03/2007 13:50 786,432 91000000-SPL_1.nb
30/03/2007 13:50 786,432 91000000-SPL_2.nb
30/03/2007 13:50 196,608 92000000-Splash.nb
30/03/2007 13:50 2,621,440 96000000-GSM_0.nb
30/03/2007 13:50 10,485,760 9b000000-Extension.nb
30/03/2007 13:50 65,536 9d000000-HTC.nb
28/03/2006 15:51 74,713,088 nk.nbf
16/09/2005 12:20 53,248 nb2nbf.exe
13/03/2006 19:09 784,972 typho5.exe
I have loaded up the nb2nbf file but have no idea what to do with it - The only option appears to be for a Tornado...
Thanks,
Sam.

Ok
fill in nb2nbf like the image in the attached zip file.
Important notes:
1. use the ... browse buttons to select your files and the length field will be filled in for you (the image shows mostly zeros)
2. the image name for the extended rom is Extension Rom (not Extended) and you have to type it manually - its not in the drop dow list.
3. the start address for OS.nb is 80040000 (not 82040000 which the program defaults to)
4. you need to manually type HTC Logo in image type - its not in the list.
Do not add the ipl and spl files! (these are the ones that are causing your problems)
When its all filled in click on Translate and when that is finished exit the program.
If you have copied all of the contents of your extracted exe to c:\ROM you should have a program called ROMUpdateUtility.
Connect your pda to usb and run this program and follow the instructions (you've done this before )
After its finished your phone will hard reset and you should have your original ROM.
It doesnt matter that ipl and spl are different versions
Good Luck

flykthewiz said:
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
Click to expand...
Click to collapse
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks

Yes you can
secoseco said:
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Click to expand...
Click to collapse

Nearly there
FlykTheWiz,
Many thanks for the instructions. I have done what you suggested with NB2NKF
However, When I try to run my RUU utility I get error code 238 Cannot Read the file.
I extracted all files into a single directory and replaced the default .NBF with my new one. Then ran the RUU tool.
Am I being a numpty?
Many thanks,
Sam.

hmmm
Try the appropriate RUU from the attached
If your ipl ends in .000 use G3 version
if ends in .0001 use G4 version

T H A N K Y O U
I would just like to thank you for your kindness and patience. I have now got the HTC device reblown to the original condition that I started from (with the exception of the IPL/SPL).
Using the G4 utility worked for me.
On the way I have learned a great deal and appreciate your assistance.
Thank you very much,
Sam.

No problem at all

flyk (definitely) thewiz !!!
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.

Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Mozzerr said:
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Click to expand...
Click to collapse

help for step by step help for change boot logo imate jamin
Hi all:
1. how to extract tools.zip on pc
2. my pda (i-mate jamin) and update smart1-new v2 . don't like change i-mate boot logo to Qtek how to change boot logo to original i-mate jamin?
thanks for step by step help.

"...a long while..."??? I don't think so!!! Still, your openess and willingness to share what you have learned in such a short while is refreshing to see on this forum!! I still say T H A N K Y O U ! !
flykthewiz said:
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Click to expand...
Click to collapse

Changing bootscreen (XDA Neo, G4)

Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!

Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356

animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp

here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...

What boot screen are you looking for? Or do you want to creat your own one?

Yes, I want to use my own! It's an Anime picture like my nickname!

welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom

I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx

Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027

first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf

welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable

You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse

flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...

Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse

can you please tell me what exactly should I do?

Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment

GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try

in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.

ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it

I need tornado rom image

I need rom image for my tornado. I bough a tornado and ı press power button ı saw "IU Build Test Only" how can I remove this attention? I tried load SP5 last rom but It doesn't work on my phone. I thing I need rom SD Backup... Is there anybody help me?

which version of windows mobile is your tornado running? it is most likely windows mobile 6? if it is, send me a PM and i will arrange to have a sd rom image posted to you.
thanx

Please anybody send me rom image or nbf file to bin file changer application...

malatyaspor said:
Please anybody send me rom image or nbf file to bin file changer application...
Click to expand...
Click to collapse
Hi,
Do you need a WM5 ROM or a WM6 rom.
If you need the original WM5 ROM you can download the update from ftp://ftp.clubimate.com/ .
If you need to upgrade to WM6 you can find the link from the 4.th post of the first thread in this forum.
http://forum.xda-developers.com/showthread.php?t=317586

I need just Wm5 sd card rom image for tornado...