From the FCC application it looks like the HTC Diamond for USA will have 1900 band only? Is it true?
I bet it will have 850mhz GSM and 1900mhz HSDPA
Considering when they launched the first GSM touch last year in Europe, the specs listed it didn't have 850mhz and it did, my guess is this may be the same. Or at least I REALLY hope that is the case.
sorry for the double post.
I hope so too but check this out:
http://gullfoss2.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=938831&native_or_pdf=pdf
This is for the DIAM100 version of the phone. I'm pretty sure I read somewhere that there is also a DIAM200 version of the phone. Maybe that has the other frequencies/larger range of frequencies.
Well, I hope you're right...
if you've noticed the newer HTC devices have the qualcom chip with is quadband gsm 850/900/1700/1900 and triband umts (cant remember the bands right now) but maybe they're working to integrate T-mobiles us umts band...
Related
Is there a way to change the 3G Frequencies on the G1 to support AT&T 3G network?
Nope, thats a hardware issue.
I thought it was possibly a software issue. If not, is there a way to change out the chip or the incompatable part to make it compatible?
card13 said:
I thought it was possibly a software issue. If not, is there a way to change out the chip or the incompatable part to make it compatible?
Click to expand...
Click to collapse
Nope...not going to work for many reasons.
been answered plenty plenty of times.
From what I can figure a hardware change may not be required with the correct radio but we dont know the right radio without the right hardware. lol I know that makes no sense but it makes as much sense as anyone can make of it thus far. When its possible I assure you I will be among the first to do it. Although Im not ready to try installing a new radio without first acquiring a backup phone but if I do Im gonna give it a try and maybe have better luck than the last guy to try.
What about a mini-usb attachment that can receive atnt signals?
I am sure with that and the right software manipulation it could work.
sjbayer3 said:
What about a mini-usb attachment that can receive atnt signals?
I am sure with that and the right software manipulation it could work.
Click to expand...
Click to collapse
While it sounds great in theory I doubt anyone would put forth the resources for such a limited market.
You would be best off getting android to work on existing AT&T hardware.
in order to do it we would need hardware which would plug in the bottom and software to tell the phone to use the signal from the attachment.
while there wouldnt be millions in the market i guarantee there are hundreds.
if anyone wants to think about it i dont mind making 50 of em and selling for cost. i have some hook ups in the engineering field i work in
ok, my question is... Europe 3g is diff than tmob usa 3g, but is tmob europe the same 3g setup as US? and if europe 3g is same as tmob europe 3g, is att US 3g same as europe 3g. so if tmob europe is same as europe 3g then a europe g1 should work on att US 3g. am i coming thru clear or am i jumping all over?
Shaggy
Shagman68 said:
ok, my question is... Europe 3g is diff than tmob usa 3g, but is tmob europe the same 3g setup as US? and if europe 3g is same as tmob europe 3g, is att US 3g same as europe 3g. so if tmob europe is same as europe 3g then a europe g1 should work on att US 3g. am i coming thru clear or am i jumping all over?
Shaggy
Click to expand...
Click to collapse
The American G1 has 3G support for HSDPA 1700 MHz & 2100 MHz, both bands I believe are used by T-Mobile. In Europe I believe they use only 2100 MHz band for 3G.
AT&T on the other hand uses 850 and 1900 MHz HSDPA
The phone has the capability for 2G at 850 and 1900 MHz, so technically it can be used on their network, just not at 3G speeds.
Although technically it's possible to design a Phase-Locked Loop to operate at a variable frequency and to be tuned with jumpers or something, it's probably cheaper for them or they might be subsidized to make phones so that they are exclusive for one network in the US.
To me the ideal is more about standardizing the protocols and the frequencies used for all companies, and having all bands available for traffic. But at least in the short-term that's not really good for business and so probably won't happen for a while.
This is all based entirely on a limited amount of research and my opinion, take it for what it's worth.
Europe uses 1900/2100 in a pair (1900 is the uplink, 2100 is the downlink). (source)
Most phones produced these days are tri or quad band and can work (almost) anywhere.. I'm surprised the G1 isn't.
Shagman68 said:
ok, my question is... Europe 3g is diff than tmob usa 3g, but is tmob europe the same 3g setup as US? and if europe 3g is same as tmob europe 3g, is att US 3g same as europe 3g. so if tmob europe is same as europe 3g then a europe g1 should work on att US 3g. am i coming thru clear or am i jumping all over?
Shaggy
Click to expand...
Click to collapse
TonyHoyle said:
Europe uses 1900/2100 in a pair (1900 is the uplink, 2100 is the downlink). (source)
Most phones produced these days are tri or quad band and can work (almost) anywhere.. I'm surprised the G1 isn't.
Click to expand...
Click to collapse
*sigh*.
Folks, you need to learn about UMTS bands before complaining about that the G1 or any other phone can't do this or that when it certainly can.
The G1 is a 3g worldphone. It works on the US 1700 AWS network (UMTS Band IV) and works on the world's 2100 network (UMTS Band I). ATT uses the 1900 Band (UMTS Band II).
Apparently the common names for these networks is being confused with the actual operating frequencies because they don't upload and download on the same frequencies. The 1900 band is not the same as the 2100 band, even though the 2100 band (UMTS Band I) uploads in the 1900mhz frequency and downloads at the 2100mhz frequency range. The 1900 Band (UMTS Band II) uploads on the upper half of the 1800mhz and downloads on the 1900mhz frequency range. UMTS Band II uploads on the frequencies that UMTS Band I downloads.
These bands separate.
TMO 3g band is different from ATT 3g band which is also different from EU 3g band.
The 1700 band (UMTS band IV) is actually made up of 2 frequency ranges like the other bands I and II are: 1700mhz and 2100mhz. In fact, the 2100mhz download range for UMTS Band IV is within the same frequencies used for the Band I download range, theoretically making it cheaper/easier for manufacturers who make Band I phones to "support" UMTS Band IV phone production.
Most phones produced today are NOT "tri or quad-band" 3g phones. In fact, I have yet to find a quad-band 3g phone. If quad-band 3g phones were made, they would be very likely to support the T-Mobile 3g network, because it's the 4th largest UMTS band type (behind Band I, II, and V). I would be very shocked to find a phone which was 2100/1900/900/850 instead of 2100/1900/1700/850.
And the G1 is a worldphone. It works just fine on UMTS in Europe. It is a band I and band IV device.
read these 2 links:
http://www.htc.com/www/product/g1/specification.html
http://en.wikipedia.org/wiki/UMTS_frequency_bands#UMTS-FDD
So to clarify, when you see a list of support bands, this is what you should interpret from those advertised bands:
2100 Band = UMTS Band I (The entire world outside of North America)
1900 Band = UMTS Band II (The Americas, ATT)
1700 Band = UMTS Band IV (The Americas, TMO)
900 Band = UMTS Band VIII (Australia)
850 Band = UMTS Band V (The Americas, ATT)
Outside of North America, the 2100 band is almost universally deployed, even where the 850,900,1700 or 1900 band is deployed.
I have done some searches and have not found a valid answer to this question. Since the HTC Touch Pro (Rafael), HTC has only put only the UMTS 900 & 2100 3G bands on their unlocked phones. Every phone released since then, has not had the UMTS 850 Band used in North America.
One response HTC purportedly gave was that due to the smaller size of the Touch Pro and the inclusion of GPS, there just wasn't room for more bands. I think this argument is pure BS. The Kaiser had three UMTS bands: 850, 1900, and 2100 and GPS. Making it good for The U.S. and Europe. All the new unlocked devices have 900 and 2100 - for Europe and Asia.
HTC's Touch Pro 2 is also following this disturbing trend having only the 900 and 2100 bands. So European businessmen traveling to the U.S. get no 3G reception on their expensive "top of the line" phone. What's HTC going to say now, there's no enough room in that monster the Touch Pro 2?
Along the sames lines, those in North America cannot buy direct an unlocked 3G phone. They will have to buy their phones directly from AT&T or T-Mobile and get locked into a long term contract to get one.
Everyone on this forum should be upset about this. My guess is that HTC is bowing to pressure from carriers to make the phones unusable on other carriers. This lets the carriers stick it to the customer.
Personally, I'd like to see Quad Band 3G in the phones so they can be used almost anywhere like they could with the Edge networks.
Im thinking of buying an unlocked GSM phone (nokia e55) soon, but im confused by GSM and UMTS because ive never had a GSM phone before. heres what (i think) i know:
Dual band 3g: 900/2100 mhz, will work with tmobile US, but only on the 2100 mhz spectrum, means no roaming.
tri band 3g: 850/1900/2100 mhz, supports tmobile and at&t, the ideal type of GSM for US.
Quad band: not sure.
fortunately ive been able to find quite a few triband e55's, but i just want to make sure i dont buy a phone with no 3g (i would NOT be happy).
btw, tmobile is the carrier im looking to change to soon, so triband is what i think will suit me best. corrections welcome.
I want to buy this device but it is overpriced here in the uk and t mobile in the usa have it a affordable price. I checked the bands and most uk phones have: 900, 1900 and 2100 for 3g
This one has : 1700 and 2100 for 3g
This concerns me a lot. Can I flash a radio from the original optimistic 2x or something to make it work in the uk? Do you think it will work on 3g out of the box? Some help please.
As you've noted T-Mobile uses non standard frequencies in the states. So, out of the box it's incompatible. As far as flashing an Optimus 2x radio, that appears to be a very bad idea due to file system differences.
Someone correct me if I'm wrong, but from what I've read the answer is no.
According to this:
http://www.wireless.att.com/travelguide/coverage/coverage_details.jsp?CIDL=1305&MNC=CING
uk carriers use 2100 primarily and according to gsmarena the bands this phone supports are:
1700 and 2100 for 3g
Wouldn't it still work out of the box even if it supports 2100 band?
Sent from my GT-I9000 using XDA Premium App
Also according to this:
http://www.mobileworldlive.com/maps...ma/gb/17016/comb/&layer_id=951&lstCountry=275
Most uk networks use 2100 band as suggested by at&t . The 1700 band is used by t mo for 4g network according to engadget. Any change of opinion now?
Sent from my GT-I9000 using XDA Premium App
"Band I" is 2100 MHz, which is supported by the G2x and is used all over Europe and Asia.
and according to this http://www.phonearena.com/phones/T-Mobile-G2x_id5272
the G2X supports 2100 UMTS (3G) or am I missing something?
The G2x supports 850/900/1800/1900 MHz for 2G/GPRS only, and supports 3G/4G UMTS/HSPA+ bands I (2100) and IV (1700). The G2x does not support AT&T’s 3G bands.
G2X spec sheet
http://stadium.weblogsinc.com/engadget/files/T-Mobile_G2x_with_Google_FactSheet_FINAL.pdf
Yes it should work, I'm currently in Europe and my g2x connects to 3G, but of course there is no 4G...I'll be in the UK in a few days in fact
rashad1 said:
Yes it should work, I'm currently in Europe and my g2x connects to 3G, but of course there is no 4G...I'll be in the UK in a few days in fact
Click to expand...
Click to collapse
Thanks for confirming
Sent from my GT-I9000 using XDA Premium App
Thanks to all who corrected me...I was under the impression most of Europe used the same 3G bands as AT&T do here. Stupid US centric assumption...I need to get out more....and keep my mouth shut when I'm not absolutely sure!
Anyway, sorry for my small contribution to internet misinformation...
bdkinney said:
Thanks to all who corrected me...I was under the impression most of Europe used the same 3G bands as AT&T do here. Stupid US centric assumption...I need to get out more....and keep my mouth shut when I'm not absolutely sure!
Anyway, sorry for my small contribution to internet misinformation...
Click to expand...
Click to collapse
Both at&t and tmobile phones would be able to get 3g signals outside of the states. I had no problem using my old iphone 3g in Hong Kong,Beijing nor my tmobile blackberry 9700 in Italy.
jdaclutch said:
Both at&t and tmobile phones would be able to get 3g signals outside of the states. I had no problem using my old iphone 3g in Hong Kong,Beijing nor my tmobile blackberry 9700 in Italy.
Click to expand...
Click to collapse
Yeah...now that's not quite right. Here's the deal:
Most of the world uses 2100 MHz 3G bidirectionally (for both sending and receiving data). This includes England, China, and Hong Kong.
In the U.S. AT&T uses Both 850 & 1900 MHz (depending on the coverage area) bidirectionally. Not compatible with "world standards". The reason you could use you iphone in China is because it has tri-band 3G. Not all AT&T phones support the 2100 MHz band.
T-Mobile uses 1700 MHz for uploads and 2100 MHz for downloading. However, all their current phones have the ability to use the 2100 MHz band bidirectionally when operating overseas.
So to sum it up T-Mobile phones will do 3G overseas, some AT&T Phones will work overseas, but most phones from overseas won't do 3G here.
I hope that makes things a bit more clear; and I apologize again for confusing T-mobile with AT&T in my earlier post.
I have my us model sim unlocked, is it compatible with middle eastern bands (mainly Kuwait) and Euro bands (mainly Germany)?
Sent from my HTC Sexiness.
Well, it is if those areas you mentioned use, or mostly use, UMTS band I (2100 Mhz). Now, if they also use, or extensively use, UMTS band VIII (900 Mhz), then I am not sure. Every spec that I have found online has said that the TMOUS version supports UMTS bands I, IV, and VIII; same as other versions. However, the specs on the side of my TMOUS retail box say UMTS bands I, II, and IV; no UMTS band VIII. To make matters worse, the T-Mobile site does not even mention band II at all, just I and IV. So, I wonder where sites such as Pdadb.net, GSMArena.com, etc. get their information, and where can we get accurate information. Sorry that I can't give you a better answer. I wish I had one...lol