Touchflo disabled - Touch Cruise General

i recently installed vito's 'Good Win', didn't like it so uninstalled. Then tried 'Touch Commander' and same again, didn't like it and uninstalled. Since then my Touchflo seems to have been disabled so I cant get the cube by gesture, finger scrolling no longer works and also left right gesture to switch email accounts etc
(is this all part of touchflo?)
Sorry if there's an easy answer, I did a search and found cabs to DISable touchflo but none to re-enable it.
Any cabs about to restore this functionality? Or if somebody could give me the necessary registry settings I would appreciate it.
Not so bothered about getting the cube back but I miss gestures

I have no idea what those programs could have done to Touch Flo and the Cube, there are so many possible variables. You could e-mail the writer's of those programs. But, my suggestion is to do a hard reset, and use Sprite to backup your phone before installing programs that interfere with core phone functions. I think in the end you'll spend less time resetting and reinstalling than you will searching for a solution.

Related

Replacement for original app manager?

Hi,
I have read that speed can be gained by switching off the big start menu and the default application manager. I have done that for the start menu, but I like the application manager, although I would like my cruise to be quicker, and disable it. Is there a good alternative to replace it? I would like just a simple program to do that. Someone talked about wktask, but it seem to me it does much more than closing applications, and I am not interested in the other functionality.
Do you know a program to do this, which doesn't have issues with the touch cruise?
Thanks a lot!

Exit contacts after making call

When I open contacts and chose a contact to make a call, after finishing a call phone application closes but contacts remains open.
Is there a way for contacts to close automatically after making a call?
thank you for answer in advance.
I have HTC touch cruise wih original WWE WM6.1 ROM.
Don't know about the default contacts app but i use iContact and it is set to close on use - problem solved.
thank you for answer. This iContact application looks good.
But problem is, since I use original ROM I can't remove original applications, and I
don't want to install any unnecessary application, especially if it is double.
I do that only if it's really neccessary (like Skyfire because of flash).
The installation of iContact will remap the "Contacts" soft key to itself so in all honesty you wont see the built in app unless you actively seek out th eshortcut created fo rit. The one on your Start menu will also be remapped.
For me its one of the must have apps to get a finger friendly PPC.
I understand I won't see original application. But it will be there. And that is what I don't like. I don't like hidden unneccessery things in windows on my PC or PPC. So I would like to find a solution with original application (which is finger frendly BTW). This is it's only lack. And inability to hide SIM contacts which doesn't bug me that much.
But if I don't find solution I will definitely try this application. And maybe you can suggest me best version since I found more of them here on xda-developers.
Thank you
You can't remove the original version as it's provided in the ROM and so without cooking your own ROM it can't be removed. The original is not overly finger friendly unless you have wee fingers.
Given your dislike of duplication of software does this mean you surf using IE.
Personally i am using the Burt Edition v6.4.5 of iContact.
unfortunately if you'd like to change preferences on your device... and enhance it, you will also have to install new applications as not all default apps can be changed the way we want.
you have a touch cruise. it's a strong device, with enough memory to hold lots of applications. don't worry about it.
Ok. I know I have to install new apps and to try things if I want to enhance performance of my mobile. And I do that. I try things and I have to hard reset sometimes because of it. And I know my phone is capable of having a lot applications installed. That's why I bought it.
I just want to find the solution that pleases me the best.
And because original application is good enough to me, except this exit problem, I think best solution would be to have original application and make it close after use.
I don't like having double applications because of my experience with windows. Everything in registry decreases performance and if I have a few applications for same thing there's usually some kind of conflict.
But as I said I do try things in search of best solution, so I tried iContact.
It really is great application, much much better than original. and much more finger friendliy.
I decided to keep it.
And then I noticed that my cube freezes after using iContact. It seems to be a common problem and I found no solution for it.
So I'm back on the beginning.
Anyway, thank you for your help, ideas and suggestions.

FTouchSL 2.10 Release + discount

I'd like to announce freshly baked version of FTouchSL 2.10.
The new version brings better compatibility with newest HTC Touch devices (HD, Diamond, Pro) as well as work on Samsung Omia i900 was significantly improved. Of course, we've tried to fix all bugs known at the moment.
Official web-site: http://www.ftouchsl.com
The discount is still available for xDA Developers members.
Use this link to get 15% discount!
P.S. As usual, simplest way to contact us is our support e-mail which you can find on the web-site.
Best regards,
Pavel.
they are on ver 2.9 sooo i think there is something wrong with there website
Problems with Blackstone
I installed version 2.10 and put the data key in the folder with the program. I then set it up by enabling scrolling and disabling native scrolling. For a while it was absolutely brilliant, as brilliant as it's been on other phones I've had, like the Trinity.
But then when I went back to TF3D and scrolled around my tabs, I discovered that the weather tab froze when it went to update the forecast. Soft reset. Likewise the stocks tab, which also updates when it's activated. Soft reset. Other tabs - photos tab, programs tab, etc - had no problems and scrolled and took gestures as expected.
The problem never resolved itself, so I uninstalled FTouchSL. But guess what - those two tabs never worked at all after that. Any time I so much as visit them, Manila just freezes, and nothing short of a soft reset fixes the problem. I decided I could live without the two tabs, but due to the wierd combination of tabs I have and a kludgy relationship with the Advanced Configuration program, I've been unable to remove them.
Ultimately I had to hard reset and restore an old backup. Lost rather a bit of data, though of course that's hardly your fault.
There seems to be an incompatibility between FTouchSL and the updating function in TF3D; what it could be I have no idea.
Is the discount still valid?

FTouchFlo alternative?

Hi all,
I've got M2D installed on my Incite, but FTouchFlo is lagging the scrolling of the tabs...
I've already got:
Manila2D.exe
HTC_HPrf.exe
Desktop
All in the exclusions list but it does not seem to work. Lag started immediately after installation of this program.
Does anyone have any alternatives?
Thanks!
what exactly are you looking for? cause you can just uninstall FTouchFLO, m2d doesn't require it.
Hi ... yes I understand that. My phone has a gestures thing that's similar to FTouchFlo, but not nearly as good (ie it sucks). I was hoping to keep the same functionality as FTF but without the bug that it keeps messing with M2D.

where do i begin? trying to find the right plugin for TP2

---
---
Deafcyclist said:
I've just gotten the AT&T Tilt2 this Dec 31 and I have been trying to figure out how to really customize the today themes. however, because nearly everyone here uses cooked roms, i just can't seem to figure out how to find plugins that can work with stock winMO 6.5 on my Tilt2. I have a few particular things I would like to set for my today themes but I need to learn even the very basic of the themes on my Tilt2 first, such as TouchFLO 3D. but what do I call the window default? so far I think it's titanium? and what about the even older looking theme that I see when I don't have either the "titanium" and TouchFLO 3D?
Basically I want easy view (or access) of the weather forecast, time, agenda, task, and messages (combined SMS, MMS, and e-mails). I would also love to be able to launch select few apps from there.
How do I go about setting this up when I do not even know how to find out all of the relevant info I needs? (believe me, I've tried to use the search functions but i can't seem to find any newbie-friendly explanations).
Sorry if I seem to be cluttering up this subforum, but I really really want to figure out how to set this up so I can truly use my tilt2 efficiently in this way in preparation for my next semester at college.
Thanks for any and all info.
P.S. I know that I will be suggested to go ahead and try to flash some roms into this tilt2 but i would rather find out of these plugin first so I can be sure that I would have all of the functionality without having to do that if I can.
Click to expand...
Click to collapse
Welcome to the forums!
TouchFlo and Titanium are today plugins.
This means that when you siable them both, you get the standard WinMo today screen.
You can disable them by going into start/settings/today. There you can disable the items you don't want.
To have more plugins for titanium, you can go here. There you can find various extra plugins, like weather.
For TouchFlo, there aren't any plugins.
I hope this helps, if you have got more questions you may always PM me.
And next time, ask questions in the Q&A section. I know that forum gets less attention but we need to keep this section clean for themes only. Thanks.
Cheers,
EC
---
Okay no problem, just next time.
As I said you can revert to the old standard windows mobile home by going to start/settings/personal/today/items and uncheck Titanium and Touchflo.
I don't know any standard home plugins, because I never used it.
If you deleted plug-ins you will need to hard-reset your Tilt2, or find a download somewhere.
EC
Moved to Q&A as not release.
You can use standard plugins. As was already said, just uncheck windows default and TF3D from today settings, and select whatever you want. I use Tonaya weather-2-go, Skyfire, Pocket Digital Clock, PDA Status, and SK T oday Commander (paid for). A lot of the freeware sites have many choices. I recommend PDA Status, it's really nice.
Anyway, I kind of agree with you on the UI's. I like having things in one place, and don't like having to scroll all over the place. If you're bored, you can check my sig and see how I have mine set up (don't flash it, though).
---
---
Frustrated
OK, I'm frustrated as hell trying to get some decent plug ins for my new phone. Just got a new Tilt 2, and really, really like the titanium weather plug in look, but cannot get it to operate on the phone. Am I missing something? The options for the today screen do not change after I install titanium weather (showaco, tried both of his v4.1 and 4.2 cabs), but a weather line shows up in the Windows default today screen. However, every time I try to get it set up, it gives me an error, essentially
(OK, I can't post a link (not trying to), but in the following, the xxxx was actually http)
'xxxx://hadle.accu-weather.com/widget/hadle/weather-data.asp?location=62002&metric=0' couldn't be opened.
also
Line 1 (\Program Files\TitaniumWeather\TitaniumWeather.mscr):link=ReadFile("xxxx://hadle.accu-weather.com/widget/hadle/weather-data.asp?location=&location&"&metric="&metric)
So, what am I missing, or am I installing an incorrect program? I'm brand new to any of this, so any help would be greatly appreciated.
Thanks!
Dale

Categories

Resources