Database Info

[SOLVED] HTC Tilt + Dutty WM6.1 + BBConnect = PIN: Pending

Hey guys, i've seen a number of different threads which "kind of" talk about this issue. I'm hoping to make this the definitive one. I'm on hour 10 of working to try to get this running..
(My apologies in advance if there is already one out there that i haven't found. i have been really looking and i think i tried it all... im sure thats what everyone says )
Hardware: HTC 8925 a.k.a At&t Tilt a.k.a TyTN II
Software: Duttys Official WM6.1 Release
Radio: 1.64.06.04
Provider: At&t (US)
Problem: BlackBerry Connect's "Identity" Tab reads "PIN: Pending"
I should also mention that i called At&t to confirm (prior to all of this) that i have a BBConnect service plan, it is active, and there is nothing on their end that would indicate a failure of any sorts.
Attempted Fixes (These have ALL failed):
I've tried every combination of having active sync enabled and disabled during bbconnect install.
I hard reseted before every install. Soft reseted after issue still occurred even after bbconnect install rebooted.
All tests were performed with the the HKLM\System\Versions Aku set to .0.4.2 as per Dutty's wiki: (http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser)
I also tried various combinations such as .0.2.0 and .0.3.6 and .0.3.0
Even tired changing Device ID to HTC_P3450
Tried all of the following BBConnect software downloads:
4.0.0.84:
http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90:
http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
Tried installing this one both by copying cab file over to local device and through device web browser:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
I'm installing from and installing to the local device memory, not the storage card..
i think i covered it all... oh, i didnt try the one HEX edit solution, because i didnt think its applicable to dutty's rom..
can ANYONE please help?!
---------------UPDATE--------------------
Okok...so problem solved... i thought i read something similar to this solution somewhere.. but..well whatever... frustrations are over (the problem always seems to find a way to fix itself after you post help for it! )
Process:
1. Hard Reset (set up initial settings, connect to provider, its a total of two reboots iirc)
2. Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
3. Soft Reset
4. Change Device ID to any value (Settings->System->About->Device ID)
5. Soft Reset
6. Install BBConnect 4.0.0.97 via device browser from http://www.america.htc.com/mobile/connect/8925/
7. Installation reboots system
8. Disable 3G connection, force to use EDGE via wireless connection manager
9. Device receives PIN, activates, etc..
10. Enable 3G connection
Notes:
1. So i dont know if items 2,3,4, and 5 were really required.. after preliminary testing, everything works fine with the 3g connection turned on after initial registration.
2. I noticed that the BBConnect Today icon kept showing an exclamation mark indicating its outgoing connection was being blocked. Also the status window kept showing that the connection was suspended by the user, when i never did anything.. so i tired disabling the 3G and sure enough.. problem solved..
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )

wooooooooooooooooooot, thx for the solution.

Man...thanks a lot for all the help...it worked like a charm...and i am using it here in dubai...uae where the black berry doestn support the kaiser offically
cheers bro

Great work man, great work for users who uses BBConect

3G still working?
Quick question for those who tried the (disabled 3G to Edge) and then re-enabled 3g.
Does your 3g still work? Have your tried to place calls in 3G mode? I am on my third Tilt, the prior two times I lost 3g after installing blackberry connect, and I want to see if anyone else has this problem, before a try a third time.
Note: On my previous two phones all worked well when I downgraded to GPRS (Edge) as described, but I never got back 3g (even after flashing and removing BBConnect)

elec.two said:
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
Click to expand...
Click to collapse
I added this post to Dutt's WIKI and gave you due credit for your hard work.

Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!

Strange... All I had to do with my Tilt was set the AKU to .0.4.2 or .0.4.4 in the registry before installing the BB Connect software.
I've used the .92 & .97 installers from CAB files on my SD card just fine.
If you change the AKU version after the BB software is installed, it won't work right, as it will still drop the connection. You'll have to reinstall the software.
http://forum.xda-developers.com/showpost.php?p=1903958&postcount=5

Quick Question
So to those of you who have BB Connect running, is all well with your 3G? Thanks for your help, I want to hear a few success stories before a walk down this path again

so I followed the steps, and got everything installed and turned off. I'm trying to get an unlocked tilt on my blackberry account on t-mobile.
The problem is its installed, but the email options are greyed out. We don't use an exchange server (or if we do it is configured very wrong) as I have pop3 information on my t-mobile blackberry page. It says I register successfully on the network, but I still don't receive emails. What do I need to chnage?
edit: fixed - I had to get back online and say yes that I had a new pin.
THANKS!!

lcohen999 said:
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Click to expand...
Click to collapse
that is the same problem I have left now, almost like hardware related.
does AT&T default one can do multiple APNs? as it is officaly support BBC.

I installed Blackberry Connect and I am using it with a Blackberry Enterprise Server.
But I see in order to have the BB icon, the GPRS is always attached. Should it work like this ? I know/knew that with Blackberry phones it attaches to GPRS only when incoming email is coming, and only with Microsoft Directpush technology it stays attached all the time.
If it works like this ( Always On ), is there a difference between BB Connect for WM, and Outlook with Microsoft Direct Push ?
Yours,
Alex

elec.two said:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
Click to expand...
Click to collapse
This link doesn't seem to work, it's actually supposed to be:
http://www.america.htc.com/mobile/connect/8925/index.html
The problem is, when you click "install now" it still can't find the cab. The 4.0.0.97 cab is now mirrored here:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_al_4.0.0.97.cab

desktop manager software
Do you have a link for desktop manager?
I have the version 4.x.17 and cannot connect with the bb on the pda.
I don't know which is the latest or most compatible version for desktop mgr having in consideration what you have in the pda. please, give me some light...

Thanks from a Touch DUAL user....
Thanks Elec.Two
Just added this to the Touch Dual Forum (Nike) as it works a dream for us too!
http://forum.xda-developers.com/showthread.php?t=390284

Has anybody an idea how this will work on a Pharos / HTC P3470? I just tried it described in this taks, but without success.

I had 2 dots and an x
I updated to Dutty's ROM today, and had problems with BBC.
So I searched, found this page and did exacty as told. No luck. Tried again. No luck.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM]
This worked for me. This info is for noobs, of which I am one!

I have just updated my TyTN II to WM6.1 and bbconnect (version 4.0.97) stopped working. Basically it had PIN marked as pending and was reporting no connection.
I have executed only step 2 (change hklm) and 3 (soft reset) from elec.two procedure and it resolved my issue - bbconnect works now. I have not reinstalled the bbconnect.

So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM
Click to expand...
Click to collapse
Well, I have to thank you on this! I could not get BB Connect to work for the life of me, and your fix finally go t it working!!!
Thanks!

.... and now for the Diamond - same old problem....
Have tried all the known fixes - I think - anyone had any success with bbconnect on the new diamond? Sigh.....

weather update stopped working

Hi,
For last 2 days im unable to update weather on touchFlo screen.
I got message "There was a connection error while attempting to download weather data. retry? Yes/No"
Both internet and mail works fine, so i dont know what to do.
Any ideas?
Im on T-mobile UK.

Got the same problem and I am on the other end of Europe, so I guess their servers are down?

darek001 said:
Hi,
For last 2 days im unable to update weather on touchFlo screen.
I got message "There was a connection error while attempting to download weather data. retry? Yes/No"
Both internet and mail works fine, so i dont know what to do.
Any ideas?
Im on T-mobile UK.
Click to expand...
Click to collapse
same here - im on vodafone. Guess the server is down. My last update was last night, but it took a long time to get

darek001 said:
Hi,
For last 2 days im unable to update weather on touchFlo screen.
I got message "There was a connection error while attempting to download weather data. retry? Yes/No"
Both internet and mail works fine, so i dont know what to do.
Any ideas?
Im on T-mobile UK.
Click to expand...
Click to collapse
me too its happened about 2 days ago i thought it's because my wifi or my 3G connection lost but it wasnt
Im on Orange...

Just found this
http://forum.xda-developers.com/showthread.php?t=411898

I have the same problem starting today, yesterday it happened occasionally.

tried alredy to disable proxy, connect directly through WiFi, and still same problem.
Must be accuweather server then.
Strange, cause their site wirks fine.

Have been having problems for the last couple of days, does look like a server issue

I figured it was a server issue too but this fix worked for me.
http://forum.xda-developers.com/showpost.php?p=2821451&postcount=30

Same for me
I was freaking out as I have just got my Touch Pro and I though I had broken it somehow? Have Hard Reset it 3 times but still the weather update keeps reporting a connection error. What to do? I am in New Zealand and have tried 3G & WiFi and it mkes no difference! I have emailed HTC Support about the issue but is there any way to confirm if it is AccuWeather's problem? Hope this can be resolved as I don't want to start tinkering with the ROM while it is still so new and under warantee. Helpful advice appreciated
Couldn't get the editor to work, something about a newer net needed? Whatever that is??? It wouldn't run.

frank_icpe said:
I was freaking out as I have just got my Touch Pro and I though I had broken it somehow? Have Hard Reset it 3 times but still the weather update keeps reporting a connection error. What to do? I am in New Zealand and have tried 3G & WiFi and it mkes no difference! I have emailed HTC Support about the issue but is there any way to confirm if it is AccuWeather's problem? Hope this can be resolved as I don't want to start tinkering with the ROM while it is still so new and under warantee. Helpful advice appreciated
Click to expand...
Click to collapse
Try the fix right above your post. I went through all the same things you did to try to fix it and just following those steps worked. (Don't ask me why!)
Good luck!

ITNV said:
Try the fix right above your post. I went through all the same things you did to try to fix it and just following those steps worked. (Don't ask me why!)
Good luck!
Click to expand...
Click to collapse
Thanks tried that but it complained about needing some newer net or something like that and wouldn't run the editor..

ITNV said:
Try the fix right above your post. I went through all the same things you did to try to fix it and just following those steps worked. (Don't ask me why!)
Good luck!
Click to expand...
Click to collapse
i confirm... it works
thanks a lot

maja said:
i confirm... it works
thanks a lot
Click to expand...
Click to collapse
Maybe it woud for me to if I could get the editor to run. Where do I get this NET thing it says it needs?

Working!!!
Hello World it seems that the even though the Editor won't actually run it does something that enables the weather updates to run again. Strange? What does it do that fixes it???
Thanks

frank_icpe said:
Hello World it seems that the even though the Editor won't actually run it does something that enables the weather updates to run again. Strange? What does it do that fixes it???
Thanks
Click to expand...
Click to collapse
Frank-
In case it stops working again or you ever need to install another program that requires the latest .NET CF, you can download it here:
http://www.4shared.com/file/37978142/c1e9d030/Microsoft_NET_CF_35.html

Download net 3.5 and weather editor 1.2 and I get an error: fire write protection of database could't removed. What is this??

Other thread about the same topic...
I also have the issue that the editor can't read something, please keep the discussion at one thread, thanks.
http://forum.xda-developers.com/showthread.php?t=411898

ITNV said:
Frank-
In case it stops working again or you ever need to install another program that requires the latest .NET CF, you can download it here:
http://www.4shared.com/file/37978142/c1e9d030/Microsoft_NET_CF_35.html
Click to expand...
Click to collapse
Great thanks, done all that and we are up and running again. Thanks everyone for your help.

dont know if its just accuweather server been fixed, or what, but everything works fine again. All i did was installing .Net 3.5 from: http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
And after soft reset everything is back to normal.

I-mate 9502: MMS&GPRS not working, Can't send SMS (Some Service Provider)

Dear All Guru....
I currently purchase Imate 9502, everything runs well until I found out that it's can't send MMS ???And Can't use 3G, or even GPRS???But can send SMS.
So i try to change the SIM card to other Service Provider, it become even worse, All MMS,GPRS,3G and SMS. all Fall to the earth all seems not to be fuction well....
I wonder any1 having this problems????
The phone is GREAT but this issues seem to bother me more and more
Thank you for helping.

Is it i have to get another Phone??? hauhua.... which i hate to do it ^^
Nobody purchase this phone/?? or only me having the problems??

hi, first of all, I would like to ask you to : please....flash the ROM using the latest WM6.1 official ROM from the imate website...I think that WILL FIX ur problem...I use imate9502, and this device is really ultimate for me

Yes the unit is working fine and good, just the problem is the Messaging and internet feature.
I do flash to 6.1 version 1.73 and curretly use 1.77 (official) still same result. i don't know what is the problem even imate personell also haven't gv me any new since 2 months ago
I go to registry but still can't find any hint
The setting for the MMS,GPRS, all already correct ( using manual and imate configurator ) no hope also.

h9s said:
Yes the unit is working fine and good, just the problem is the Messaging and internet feature.
I do flash to 6.1 version 1.73 and curretly use 1.77 (official) still same result. i don't know what is the problem even imate personell also haven't gv me any new since 2 months ago
I go to registry but still can't find any hint
The setting for the MMS,GPRS, all already correct ( using manual and imate configurator ) no hope also.
Click to expand...
Click to collapse
Hi h9s,
I've found your post googling for something else. I suppose you have already solved your problem with internet connection by now. Please, disregard this post in this case. Anyway, I wonder if you have already changed the GPRS authentication method. Go to Start > Settings > Connection tab > GPRS Authentication. Its defaulted to CHAP. Change it to PAP instead and give it a try.
Just my 2 cents...
Cheers!
Carlos

SOLVE!!!
Stupid Old SIM Card Was The Issues
After 10x Hard Reset, Finally Found Out My Mistake.
^^
Now, I'm Happy

Cannot update imate configurator
Hi I cannot connect through my GPRS, seems like something wrong with the connection setting. Currently I'm using Satelindo (Indonesia), and I tried to download the imate configurator file from https://www.imate.com/Support_OperatorSettings.aspx but when I try to install it always says The previous version must uninstalled before, and when I click yes, it always failed to uninstall the previous version & the instalation unsuccesfull. Anyone could help me? Thanks in advance

spizaetus said:
Hi I cannot connect through my GPRS, seems like something wrong with the connection setting. Currently I'm using Satelindo (Indonesia), and I tried to download the imate configurator file from https://www.imate.com/Support_OperatorSettings.aspx but when I try to install it always says The previous version must uninstalled before, and when I click yes, it always failed to uninstall the previous version & the instalation unsuccesfull. Anyone could help me? Thanks in advance
Click to expand...
Click to collapse
You see, I find i-mate's Configurator to be pretty useless in detecting my carrier's data here in Brazil, for what I removed its .lnk item from my \Windows\StartUp a long time ago, and I manually provided my carrier's data (GPRS, MMS). Please, consider doing the same.
Just my 2 cents...
Cheers!
Carlos

[Q] Anyone able to use Skype on TG01?

I installed Skype on my HTC 8525/Hermes (custom Schap's ROM for 6.0) a few months ago and it installed with no problem but just won't connect. It goes through the motions with the swirling icon, but finally times out. The same happened when I installed Skype on my 'new' TG01. I looked in the WM forums here and someone said to try a different ROM. I'm now on my 2nd ROM, FXDJ's excellent 6.5 ROM2_0,update 6, and still have the same problem. Of course, I tried it first with the original Orange 6.5 version. I've also tried 3 different Skype versions for WM that all installed with no errors. If anyone has a solution I would really appreciate it! BTW, during install it says have to have wi-fi/Active Sync or 3G connection. We don't even have 2G in this area of Thailand so connected to Internet via Active Sync.
Thanks in advance!

I tried my luck with Skype on TG01 a long time ago, both winmo6.1 and 6.5, found some outdated (even at that moment) skype winmo kits but they didn't seem to work anymore. Skype communication being proprietary, they can change it whenever they want, thus rendering old kits useless...
If however anybody does have Skype on Tg01, please share it with us the noobs that don't know that it works on winmo... Thanks

a_nini75 said:
I tried my luck with Skype on TG01 a long time ago, both winmo6.1 and 6.5, found some outdated (even at that moment) skype winmo kits but they didn't seem to work anymore. Skype communication being proprietary, they can change it whenever they want, thus rendering old kits useless...
If however anybody does have Skype on Tg01, please share it with us the noobs that don't know that it works on winmo... Thanks
Click to expand...
Click to collapse
Greetings a_nini75,
I do remember a Skype announcement last year IIRC saying they weren't going to support WM anymore, but I thought that was just for software updates. Also, other WM users here seem to still be able to connect. My brother has been using Skype on his BB Storm 2 with no problems until recently when it suddenly would not connect to the Skype server. He called his telecom to see if they were blocking the connection but they said no blocking whatsoever. Now that M$ bought Skype one would think that WM support would rise from the ashes. Sure hope someone has a fix!

This is the last Skipe version working on WM
http://bit.ly/nDWZrI
and it works for me.
Try it !

Pere said:
This is the last Skipe version working on WM
http://bit.ly/nDWZrI
and it works for me.
Try it !
Click to expand...
Click to collapse
Hi Pere,
Thanks for the link. I have this version already and it didn't work, but downloaded and installed it from your link and it's doing the same thing...showing the Skype white and blue screen with the spinning icon, but not connecting. I confirmed that my Internet connection was good before starting it. Any suggestions?
Thanks!

I ve hav same problem.
Connect whit wifi, then enter your login,pass. Then wait about 2minutes , it will say that cannot connect, something like that. Then try to connect once again, after second time skype should connect normaly...

pozitiv00 said:
Connect whit wifi, then enter your login,pass. Then wait about 2minutes , it will say that cannot connect, something like that. Then try to connect once again, after second time skype should connect normaly...
Click to expand...
Click to collapse
Greetings pozitiv00,
I've tried that over and over again with 2 different phones, 2 different versions of WinMo and 2 or 3 or 4 different Skypemobile cab/exe files and it still won't connect. The Skype icon just spins. I wonder if connecting directly via USB to Windows Mobile Device Center (W7 Ult.) might cause a problem, since my D-Link Wi-Fi modem is in the shop...again. I've also tried connecting to Skype via cell tower, also no joy. I can peruse any other website except Skype.
This is baffling!

Yeahhh
I can send you CAB-file for SKYPE that works, and U can send me code of some PPC programs whats need it .
OK?

Dolt$ said:
I can send you CAB-file for SKYPE that works, and U can send me code of some PPC programs whats need it .
OK?
Click to expand...
Click to collapse
Sure, just send me a PM. I'm not having a problem with installing any of the Skype versions, they just won't connect. They go through all the motions, but just won't connect to the Skype server. As far as PPC programs I'll be happy to share whatever I have.
Thanks!

CrashMurdock said:
Sure, just send me a PM. I'm not having a problem with installing any of the Skype versions, they just won't connect. They go through all the motions, but just won't connect to the Skype server. As far as PPC programs I'll be happy to share whatever I have.
Thanks!
Click to expand...
Click to collapse
hello
Skype 3.0.0.256 cab
works on almost any phone
only the first time you have and you have to wait and wait longer
copy itself from the Application Data Folder Skype
as bakcup and you will not even have to wait
Skype working is personally checked
on
Topaz
HD (blackstone)
HD 2
Omnia 2
Omnia B7610
and
xperia x1
omnia i920

jorobg said:
hello
Skype 3.0.0.256 cab
works on almost any phone
only the first time you have and you have to wait and wait longer
Click to expand...
Click to collapse
Greetings jorobg,
I've tried this version already. It installs OK but doesn't connect. How long to "wait and wait longer" before it connected for you?
Thanks!

CrashMurdock said:
Greetings jorobg,
I've tried this version already. It installs OK but doesn't connect. How long to "wait and wait longer" before it connected for you?
Thanks!
Click to expand...
Click to collapse
months ago on wm 6.5.x I have test the same skype.cab- it works. The FIRST time run it will no log in. close it after try. the all next time log in very quick .........

CrashMurdock said:
Greetings jorobg,
I've tried this version already. It installs OK but doesn't connect. How long to "wait and wait longer" before it connected for you?
Thanks!
Click to expand...
Click to collapse
by my always working 3.0.0.256
but on the HD2 first time mast waiting and waitnig
on the Topaz abaut 5 min.
on the blackstone 5 min.
I`m take alweys backup of the folder skype in the application data and newer waitnig
try it conect via wifi to the network then
log in wrong
to see is the evrything ok
if you get response from Skype network
pasword or the login is wrong
then is nothing wrong with Skype
it is somewhere near you
sory abaut eng. language
all exe files are COMPRESED _ Squeezer

[Q] Htc Mango Driver v3 on Trophy

Hi,
I need help installing the htc mango driver v3 because with the current version i cant connect to my home wlan network which is built on a ddwrt router, before i installed the update everything was working fine, i also tried it my gf's IPhone and with it i can connect without a problem. I cooked my own custom rom firmware but i really dont know how to put the new htc driver in it.
I saw that the htc mango driver v3 is avialable for Htc Hd7..
Config: WPA2 encryption, mac filter disabled, dhcp
tried: DFT rom, Ansar Rom and the one which i created myself
Phone: HTC Trophy with custom rom
I hope someone can help me (((

I was having the same issue so I am looking into it now.

Hi i tried to flash a custom rom and after installing a wifi hack i was a able to set the ip. I also found this solution if you already have a developer unlocked phone:
sensboston said:
You can do that via the registry:
[HKEY_LOCAL_MACHINE\Comm\<YourAdapter>\Parms\TcpIp]
"EnableDHCP"=dword:0
"DefaultGateway"="192.168.1.1"
"UseZeroBroadcast"=dword:0
"IpAddress"="192.168.1.100"
"Subnetmask"="255.255.255.0"
4 example, <YourAdapter> for Samsung Focus is BCMSDDHD1
Of course, the "DefaultGateway" and "IpAddress" should fit your router settings (some routers configured to use 192.168.0.x subnet)
Click to expand...
Click to collapse
Hope it helps, i now can connect to my wifi )

Hi there,
I have tried to figure out a solution for this problem for over a week, just today I thought I might fix it by installing the latest NextGen+ rom after taking pains to downgrade the spl.
But still no wifi... it seaches then shows "no networks found"...
My wildfire s.. picks up many. I have no MAC filtering, using DHCP and on channel 7.... tried everything.
I read someone called "thesmack" saying he fixed a similar issue by getting a "V3 Driver" update by HTC from XDA but I cant find it, and he didnt share any links.
Please if anyone knows the solution to this problem help me out, by having no wifi the phone is worth little.

I suggest you turn of wifi and then turn on bluetooth. reboot phone and turn on wifi. I had the same problem. but now is ok

djpetere said:
I suggest you turn of wifi and then turn on bluetooth. reboot phone and turn on wifi. I had the same problem. but now is ok
Click to expand...
Click to collapse
Unfortunatly that didnt work. I flashed an old radio (nodo) to see if it would work, still nothing. But funnily this morning when I switched on the phone it showed the small "networks available" icon, yet when I went into wifi... it refused to let me see the page, then after a while of trying it came up and didnt detect anything.
This is SOME bug that its taken so long, with giants like MS and HTC unable to resolve it.