Database Info

duplicating phone

I have multiple tilts, and want to make them all the same... is there a way that after I've got one working the way I want it to quickly duplicate/copy everything to another tilt?
I've looked at the kitchen stuff, but need a good walk thru to make heads or tails,,,
I basically am taking someones already cooked ROM, then modifying it and adding the CABS I want, and the config settings I want for the phone. I am also changing start menu layout to my liking.
thanks in advance!
-mike

I did a search and can't find an easy answer to this. Anyone have a suggestion?

you can use sprite backup and then do a "upgrade" restore to get most of your stuff on the other tilts. will need to reconfigure email though. please read the help and faq at Sprite's website before you do it.

You want aprogram called SPB Kiosk. I'ts not cheap, but I did some beta testing for them & can probably send you a test copy that's fully functioning. PM me if u want.

why do you need multiple tilts? not to be a smart ass but just dont see the logic. in regard to your question why not install the same rom/radio on each and load your preferred cab files on an sd card and just load them up. its a bit tedious however it shouldnt exactly be brain surgery. plus use pim backup so each phone can have same contacts etc...

Probably b/c like me they are for family &/or business use.
swtaltima said:
why do you need multiple tilts? not to be a smart ass but just dont see the logic. in regard to your question why not install the same rom/radio on each and load your preferred cab files on an sd card and just load them up. its a bit tedious however it shouldnt exactly be brain surgery. plus use pim backup so each phone can have same contacts etc...
Click to expand...
Click to collapse

Correct me if I'm wrong but I think the suggestions so far are to backup the programs and settings but not the ROM. Am I confused?

What you are looking for is something like Sprite Clone (but it aint cheap).

"Kloning the Kaiser"
KODIAC said:
I have multiple tilts, and want to make them all the same... is there a way that after I've got one working the way I want it to quickly duplicate/copy everything to another tilt?
I've looked at the kitchen stuff, but need a good walk thru to make heads or tails,,,
I basically am taking someones already cooked ROM, then modifying it and adding the CABS I want, and the config settings I want for the phone. I am also changing start menu layout to my liking.
thanks in advance!
-mike
Click to expand...
Click to collapse
Spb Backup does a complete backup and restore of everything you have installed, all PIM data, and all Register settings, but doesn't install the ROM. I would think you could flash the ROM you want on every other device, and then take the Restore file from the complete unit and run it on every other unit. The Restore file is a self-contained .EXE file, it doesn't need the program to be installed (because the whole point is that it will reinstall everything even if your current program structure is FUBAR)

Missing file errors.

Whenever my phone wakes up from a sleep or I end a phone call, three error messages pop up saying that I'm missing three different files.
Yesterday, I installed some weather apps to try out, but I forgot to backup my regs. So when I uninstalled them, they must not have cleaned up too well and still try to run!
Three errors are:
Cannot execute \program files\Outerdepth\KPWeather\KPWeather.exe
Cannot execute \program files\nrg\chomeminiweather\weather.exe
Cannot execute \program files\nrg\chomeminiweather\monitor.exe
I searched the registry and found some registry entries in the Mort process key. Deleted those. Error still persists.
There is nothing in startup like these. No program files to look for because the folders aren't there.
I just want my phone to go back to normal. Preferably without hard reset.
Please help this fool. :'(
EDIT:
Forgot to say, I'm using a Samsung Omnia i910. Upgraded to compact.net framework 3.5, if that is relevant.

Perhaps this would be more appropriate in each packages
thread?
EDIT:
Please refer to these links respectively
NRG Miniweather App: http://forum.xda-developers.com/showpost.php?p=3582908&postcount=792
Outerdepth Weather App: http://forum.xda-developers.com/showpost.php?p=3582982&postcount=132

Done with it.
I just decided that it was better to hard reset the phone. The trouble and hours I spent on this weren't worth it, and I just wanted to get back to enjoying my phone.
Maybe these posts will get some sort of exposure and have the problem solved so the next person can find it.

I went the same route and hard reset the phone as well. Oh well!

try reinstalling them and then uninstalling them using SKTools

oh.. and then perform a cleanup using SKTools

still..
.. after using SKtools on a Polaris (uninstall, cleaning up, in normal and safe mode, you name it) I still get the same annoying message.
is there any solution to this?
thanx
alex.

That annoys me totaly. SKTools don't fix the problem. I only could fix it with a dummy exe file. But don't have tested it. It would be nice if the coder of
NRG Mini Chome Weather 1.2.1 + Monitor BJ Version.cab
Click to expand...
Click to collapse
gives us more informations how to uninstall completly.
Never saw an app like that. No registry key, no startup files, but annoying error messages.

[UPDATE!] AMAZING ALL-in-ONE CAB :) WM6.5 or WM6.1 - EASY INSTALL!

#4 - ADDED MY SOURCE FILES!!!! Just in case u wanna change something
Ok guys...here we go again I try my best to put some of t7he things i like into the same cab...looks huge...but looks nice Some of the best features without touching too much the rom. DISCOVER YOURSELF Is all I can say
1. Random contacts retouch
2. Volume retouch
3. M2D DJ Koa retouch and retouch with Landscape
4. workaround Honeycomb...DJ Koa retouch (best feature is with Josh 21198 v1 ...seems to be fast and skin works better)
5. Keyboard Skin
6. DJ Koa 6.5 Skin (i try to put big menus...but fixing)
7. ...some more tweaks specially on manilla
PS - I will keep adding/fixing things Hugs
Ai ai ai....people complaining about loosing data with this cab. Well..I tested pretty much times with different roms. In any case, please backup ur data before install and please: make sure you have enough space to install and work. And follow the proper steps down. Is easy. And please feedback with ur rom's so I can keep testing.
------------------------------------------
Pre-install:
YOU MUST HAVE A SDCARD!How to install?
1. DISABLE TOUCH OR M2D IN TODAY!
2. RUN CAB
3. DON'T LET IT SLEEP WHILE INSTALL!

More caps
Here some more caps...

Looks nice but how do we install two zip files?

Source files!
Ok my friends!!!! I decided to share with you guys the source files for this so that everything is clear If u feel u can change source.
I used Cabwiz to pack it. I FEEL THE Source!
1. Install cabwiz
2. Create a folder to cabwiz folder and unzip the inf into there
3. Unzip the other zips to same folder
4. Run ..\cabwiz "DJKOA M2D 1.00.4000.1903.inf" /compress
it will generate the CAB.
Cheers

Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.

thankssssssssssssssssssssssssss

Good stuff mate but this should be posted in Kaiser software section Anyway, going to have a spin at this.

piplewis said:
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
Click to expand...
Click to collapse
djkoa, this is probably because of a single file. Ussaully a dll will cause this. Some dll's don't like being installed via cab. They must be manually copied. Another problem could be that piplewis has a dll or file installed that can't be overwriten. Another usaully a dll problem. I've noticed some dll's, once you replace it, you can't replace it again. The work around I found is to rename said dll as .bak which will cause the ROM to use the original again and allowing the file to finally be replaced.
Overwise, great job, only ther suggestion. I thought about making 1 big cab myself, but realized large cab's are difficult to uninstalled. If the user changes 1 small thing, it won't uninstall and will cause them to need to hard reset. Have that problem with NeoTitanium. People change a registry or something and BAM, can't uninstall it.

piplewis said:
Won't install for me, says installation unsuccessful because of insufficient system privileges.
Phone was connected to pc all through installation so did not got to sleep.
Click to expand...
Click to collapse
Same for me. Im really hoping we find a solution to this cuz this looks awesome. I dont have M2D installed though, i dont know if that matters.

drkfngthdragnlrd said:
djkoa, this is probably because of a single file. Ussaully a dll will cause this. Some dll's don't like being installed via cab. They must be manually copied. Another problem could be that piplewis has a dll or file installed that can't be overwriten. Another usaully a dll problem. I've noticed some dll's, once you replace it, you can't replace it again. The work around I found is to rename said dll as .bak which will cause the ROM to use the original again and allowing the file to finally be replaced.
Overwise, great job, only ther suggestion. I thought about making 1 big cab myself, but realized large cab's are difficult to uninstalled. If the user changes 1 small thing, it won't uninstall and will cause them to need to hard reset. Have that problem with NeoTitanium. People change a registry or something and BAM, can't uninstall it.
Click to expand...
Click to collapse
Pretty spot on when it comes to .dll You can make the the cab itself to step by step rename->copy it. Other than that its a ok project, one idea I thought of is whit youre project to make it more customizeable is to take advatage of one if the autoinstallers. And then make a folder whit all the cabs, if you make the whole SJABANG finish to go out of the box you can lateron change its contents aswell as the users themself.
I have 2-3 of theese setups myself whit payed content as stuff from lakeridge, SPB and so on. Making a cab is good training but not wery customizable in the loong run on this project IMO.

raiisak said:
Pretty spot on when it comes to .dll You can make the the cab itself to step by step rename->copy it. Other than that its a ok project, one idea I thought of is whit youre project to make it more customizeable is to take advatage of one if the autoinstallers. And then make a folder whit all the cabs, if you make the whole SJABANG finish to go out of the box you can lateron change its contents aswell as the users themself.
I have 2-3 of theese setups myself whit payed content as stuff from lakeridge, SPB and so on. Making a cab is good training but not wery customizable in the loong run on this project IMO.
Click to expand...
Click to collapse
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.

drkfngthdragnlrd said:
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
Click to expand...
Click to collapse
Tricks of the trade ".bak reminds me of something "
Would just be better as seperate installs .cabs.

drkfngthdragnlrd said:
Another work around for Uninstalling, is to reinstall it first. It's a bit time consuming, but even if WinMo can't uninstall the software when trying to reinstall, it'll still let you reinstall replacing all original files and "Should" let you uninstall finally. A few extra steps and time consuming true, but better than a HArd Reset if it works.
Click to expand...
Click to collapse
Getting the perfect setup is wery time consuming, its no secret that the order its installed, register strings overlap eachoter and so on will count for the final result. Reinstalling the cab just to have it removed from installed list doesnt mean you have a good uninstallation. Going from one setup to another whit several cabs when it comes to interface, its almsout inevitable that you going to hard reset to have a fresh installation.
My thought was that its easyer to update the package itself, not update the software on the phone

Ok, I disabled m2d and without soft resetting (after 1st attempt) tried to install again. This time it seems to have installed.
Just restarting now, will let you know.
*Edit*
Yup, seems to have installed fine now.

I can't uninstall......hardreset now

Hi, is it possible you can make this into a .cab.

piplewis said:
Ok, I disabled m2d and without soft resetting (after 1st attempt) tried to install again. This time it seems to have installed.
Just restarting now, will let you know.
Click to expand...
Click to collapse
Hmm, I think I am going to pass on this on for now. All brewed in like this is unlikly that im going to have a good installation IMO. Should be step by step whit whit atleast one reset as far as I could see (HTC HOME),. Good combination, no doubth. But to just gather everything in one big cab im not a fan of. Also I would take advatage of pre-xml in making of this
I dont mean to be critical in a bad way here, its good training and as I sad good combination. I didnt pop the setup.dll as I stopped looking after a minutt, clearly you havent used that much time on this mister Also this installation is expect upon that you have a SD card in phone upon installation (but who doesnt have that, but still a good thing to inform on).

I perform a remove it, run it and after about 5 minutes of it can not remove so I hardreset
after hardreset (keep in storage Kaiser) the entire all data on my storage end are lost, empty storage .... please help me,
So....anyone try it and check

sported said:
I perform a remove it, run it and after about 5 minutes of it can not remove so I hardreset
after hardreset (keep in storage Kaiser) the entire all data on my storage end are lost, empty storage .... please help me,
So....anyone try it and check
Click to expand...
Click to collapse
That is what happens when you hard reset the phone. All the data:contacts, messages, pictures, songs, etc. are lost. You should had used ppm backup (I think that is what its called) to save your contacts and messages on a sd card on computer.

dooyoo222 said:
That is what happens when you hard reset the phone. All the data:contacts, messages, pictures, songs, etc. are lost. You should had used ppm backup (I think that is what its called) to save your contacts and messages on a sd card on computer.
Click to expand...
Click to collapse
You probobly mean PIM backup and he can find it here: http://frifor.com/download/IBI/PIM_BACKUP_V2.8_MONX.CAB

How to remove/change HD2 windows files

Hey, this question maybe was asked before, but couldn't find it any where. We can do a lot of tweeks with removing/ changing file in WM6.5 folder, but every time i try to do so it says "Acces denied". what i do wrong and what i need to do. your help and tips are welcome!
Blue skies...

Try Total Commander
For the language tweaks on this forum, and other stuff where you need to "overwrite" ROM files, use Total Commander.
It won't allow you hardcore stuff, but for many tricks advertised here it works.
Thinking of it, I wouldn't be able to come up with a good search term for this either. However, the threads with tricks do tell you to use TC.

thanks, but where do i use Total Comander? on PC or on HD2?? thanks again?
p.s. i wnated to change welcome screen to them nice girls on one of the theds and it didnt alow me!

parasexas said:
thanks, but where do i use Total Comander? on PC or on HD2?? thanks again?
p.s. i wnated to change welcome screen to them nice girls on one of the theds and it didnt alow me!
Click to expand...
Click to collapse
Total Commander runs on the phone. It's basically a file explorer alternative that does a few other things, like registry editing, as well.
It allows you to overwrite read-only and system files that aren't in use.
You should have no problem replacing the startup images with it.

hey johncmolyneux, i see you are one of poor UK HD2 owners with skinned rom. i'll show up stupid again but where do i find TC on UK O2 rom. i had one on my touch pro but i just can't see one on HD2. maybe because O2 removed it? maybe you know link to download on for HD2? thanks in advance

don't worry, found it. anybody need it as weel it's freeware on
http://www.ghisler.com/smartphone.htm

Glad you sorted it. I just found it by googling.
Incidentally, I'm an O2 user, but my phone isn't an O2 one - I bought it SIM free. Also, Total Commander doesn't come on the standard ROM either, so you would have been looking for it regardless!
I didn't think O2 were doing anything to the phone. Have they skinned it then?

parasexas said:
don't worry, found it. anybody need it as weel it's freeware on
http://www.ghisler.com/smartphone.htm
Click to expand...
Click to collapse
Hope you didn't try to install the smartphone version on HD2.
This is the correct version
http://www.ghisler.com/pocketpc.htm

yeap, first what i missed is wifi router! and believe some other small bits and bobs as i haven't seen hrc rom yet. another thing bastards locked damn phone and need sim free as i travel alot to europe and use foreign sims. by the way i rcopied files for lock screen and welcome screen to win dir, soft it but no changes happened. any ideas where did i go wrong?

parasexas said:
i rcopied files for lock screen and welcome screen to win dir, soft it but no changes happened. any ideas where did i go wrong?
Click to expand...
Click to collapse
I've only played with the lockscreen myself, and I did that by copying the cpr file and the associated png files into the windows folder, and then just to be sure, I copied the cpr file into the \windows\lockscreen\ folder as well.
That worked for me.
As far as the start screen goes, I'd raise the problem in the thread that you got the screens from.
Good luck

hey, thanks, i just managed to do welcome screen, but still figthing with lock screen. could you please give link where i can find working lock screen files as ones i've got seems not working! thanks

how to view and get to windows folder located on my phone connected to my computer? (have option " view all files" enabled in my computer)

SOLVED:How do I get back clock.exe

Hi,this is quite urgent,sorry to say so.
I replaced my clock.exe using vjbrik,so that it would open klaxon instead.
Now,I just tried android and now My clock is wrong (I think about 2 hours late),but I can't seem to change it anymore,because I always open klaxon. I tried replacing clock.exe again with one I found on a forum thread here, but it doesn't open... a certificate problem or something.
Could anyone please help me out here? It would be very much apreciated!!
TIA

Just after I posted the previous message I thought, why not booting into winxp again and try if activesync also syncs the time... well this did the trick for now.
Still, it would be very useful to know how to get to my clock settings again on my touch pro, so all suggestions are still welcome.
Thanks in advance

To remove the new clock.exe, either use sk tools (and the replaced rom file tool), or open up \windows with Total Commander, delete clock.exe and soft reset. That will restore the original one.

Thanks,
Removing Clock.exe and restarting did the trick