Related
is it possible to change the default dialped to the one that i show in the attachment ?
thanks
ori
ori_lavee said:
is it possible to change the default dialped to the one that i show in the attachment ?
thanks
ori
Click to expand...
Click to collapse
Hi Ori,
I dont have the kaiser yet to tell you for sure, but I think this will work for you http://forum.xda-developers.com/showthread.php?t=321605
as long as you install the SDKCERTS.cab should be fine but why would you want to take a step back the dail pad is amazing that comes with the Kaiser
austinsnyc said:
as long as you install the SDKCERTS.cab should be fine but why would you want to take a step back the dail pad is amazing that comes with the Kaiser
Click to expand...
Click to collapse
He is using EZdial on his diaer, and it dosent fit on the Kaiser dialer.
hi shay and austinsnyc
thanks for trying to help
shay is right it is not possible to use EZDail on the default dialped.
since the default dialped that comes with the original ROM on the Kaiser is also a SKIN
it is not possible to disable it by editing the registry and install a different skin because the original skin always have preference
i need to find a way to disable the default dialped deeper than only editing the following registry velue :
HLM > Security > Phone > Skin > Enabled to 0 from 1
Ori
someone ?
ideas ?
nobody have a clue for me how can i do it
I'll post here instead of making new thread.
I also want to change my current dial pad on vario III. I already have whats presented in first post and want to have something I had on my wizard with WM6 which looked like this. Any ideas how to change to that dialpad?
very god!!!
Predo
I managed to get this dialpad by mistake !
I tried to use the program "Realvga". It has an option to remove dialpad which I selected, It then gave me this dialpad that you are talking about. Obviously the rest of the programs fatures didnt work. But i find this defualt dialpad to be faster then the default Kaisers pad.
Lemme know if this is what you are after.
dalewinterstein said:
Predo
I managed to get this dialpad by mistake !
I tried to use the program "Realvga". It has an option to remove dialpad which I selected, It then gave me this dialpad that you are talking about. Obviously the rest of the programs fatures didnt work. But i find this defualt dialpad to be faster then the default Kaisers pad.
Lemme know if this is what you are after.
Click to expand...
Click to collapse
spot on my friend! much appreciated! i do agree that without skin it is faster and what's more important for me it is so much more usable!
thanks!
The registry key posted above by ori_lavee and a soft reset are enough to get back to the original dialpad, which i like better than htc's dialer, but..... 3g video call doesn't work. it's not on the dial pad, it's in the menu, but it doesn't work
RPG0 said:
The registry key posted above by ori_lavee and a soft reset are enough to get back to the original dialpad, which i like better than htc's dialer, but..... 3g video call doesn't work. it's not on the dial pad, it's in the menu, but it doesn't work
Click to expand...
Click to collapse
yes that is the problem
well not for me as I'm not using video calling but i can imagine it is a serious limitation nevertheless
I was just checking in to see if there was a new dialer perhaps that looks like the one on the touch - like the one in the attached jpg in the first photo?
Thanks
Dutty's newest ROM for the Tilt has almost that exact dialer.
Thank you very much! I don't use speed dial but the person who asked me if I could find one complained that speed dial disn't work afterwards - do you know if I just wasn't doing something right.
predo said:
I'll post here instead of making new thread.
I also want to change my current dial pad on vario III. I already have whats presented in first post and want to have something I had on my wizard with WM6 which looked like this. Any ideas how to change to that dialpad?
Click to expand...
Click to collapse
If you want to revert to the standard (and nicer IMHO) WM6 dialpad, just edit the following key :
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled = 0
sebbes said:
If you want to revert to the standard (and nicer IMHO) WM6 dialpad, just edit the following key :
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled = 0
Click to expand...
Click to collapse
Thank you, it works. Now I have a DialPAD I like. After custom ROM I got a Touch DialPAD which somehow missing the Speed Dial key pad.
Was the same for me, and I didnt like the blue background for reading the smartdialer's matching entries
Any1 know how to completely disable (i dont want it in memory too) Touch FLO?
Hey...
Try this:
\\\REGISTRY\HKLM\Software\OEM\TFLOSettings\
EnableCube = 0 (original = 1)
It worked on my MDA Touch and i know it worked on some Orbit 2 too....
Tweaking instead of On/Off
The Polaris also has a number of other registry entries under TFLOSettings that, in addition to allowing you to turn Touch FLO on or off, also enable you to tweak its sensitivity. Does anyone know if these settings documented somewhere? I've done a search and found bits and pieces of information but not all the information in one place. Thanks.
WHY, oh why?
wonderiuy said:
Any1 know how to completely disable (i dont want it in memory too) Touch FLO?
Click to expand...
Click to collapse
Question: Why would you want to disable TouchFLO? I personally think TFLO is the best invention since sliced bread...
http://forum.xda-developers.com/showthread.php?t=351082
GenghisKhent said:
The Polaris also has a number of other registry entries under TFLOSettings that, in addition to allowing you to turn Touch FLO on or off, also enable you to tweak its sensitivity. Does anyone know if these settings documented somewhere? I've done a search and found bits and pieces of information but not all the information in one place. Thanks.
Click to expand...
Click to collapse
I found this http://forum.xda-developers.com/showthread.php?t=351082 under Tips & Tricks (post #6) from the Nike forum but it works on the Polaris. I changed the Touch Flo settings on both my Nike and Polaris from 15 to 50 and now it's much faster. Hope this helps, let me know.
Excluding Apps from TouchFlo
badaccent said:
Question: Why would you want to disable TouchFLO? I personally think TFLO is the best invention since sliced bread...
Click to expand...
Click to collapse
I like TFLO. However, certain apps like PhatPad which I use don't behave well with it. So I would like to exclude certain apps from TFLO. I could do this with fTouchFlo by editing a config file. However, I don't know how to do this with TFLO and a search didn't find anything. Anyone help would be appreciated.
Disable TouchFLO - to do or not to do . . .
badaccent said:
Question: Why would you want to disable TouchFLO? I personally think TFLO is the best invention since sliced bread...
Click to expand...
Click to collapse
Good for you. To each his own.
I DON'T like it.
I want to use stylus or buttons only. I don't give a damn about finger functions on the screen.
Let people do what they want. Help them if you are interested and you can, but no need to denigrate them.
Don't take this as a flame - no offense intended - I just recognize that whatever feature exists for any mechanical device, some will love it, some will be indifferent, some will hate it.
GenghisKhent said:
I like TFLO. However, certain apps like PhatPad which I use don't behave well with it. So I would like to exclude certain apps from TFLO. I could do this with fTouchFlo by editing a config file. However, I don't know how to do this with TFLO and a search didn't find anything. Anyone help would be appreciated.
Click to expand...
Click to collapse
I am not sure that is possible. Your best best is to make the PhatPad developers aware of whatever issues you are having so a possible fix can be applied to future versions of the app.
I want also disable TouchFlo and replace it with the 4 cube version SCLPF
Hello, I have my polaris for a week now.
But I have the oppsite problem. My TFLO is disabled, but I don't know why!
I dont have my Polaris in landscape mode, so it should work.
I don't have any strange programms installed.
Can anyone help me with this?
TFLO has reg settings to disable for certain apps. Eg there's one for photo album there.
Is there anyway I can benefit from TouchFlo and some of the SPB softwares (like phone suite, Spb diary, mobile shell etc.) both?
I would like to see multiple appointments on my today screen and also the task list by categories which is very important.
Moreover, I have found that the sound stuff doesnt work properly on any of these roms available here unless i use mobile shell which really keeps phone silent only when i have a calender item that marks me busy. TouchFlo sound option keeps the phone silent eventhough someone's birthday is there on the calendar or even if my out of office event is there on calendar..
when i killed twice manilla2d.exe all that absolutly useless (for me and maybe some other users) stuff as panel in the bottom and large alarm clock which makes my device stupid disappeared. now there is clean screen with wallpaper. very nice, i like it but there is string "tap here to launch touchflo tm". is it possible to disable manilla2d.exe startup on every boot and this start link on the screen? (via system registry file?)
so when it is completely disabled it would be perfect to have some tiny alternative as clock in system tray or on the screen. and one more useful possible function is smth like custom desktop shortcuts.
do you now such software programs?
htc touch elf, wm 6.1
Moved of: HTC Polaris: Touch Cruise > Touch Cruise ROM Development
To: HTC Polaris: Touch Cruise > Touch Cruise General
Please put your questions to: Touch Cruise General
Too many theads relating directly to the fuze! Here is one big thead. Please post in here That way, we don't flood the whole Raphael forums with fuze this and fuze that. I'll edit the first post as we go. Or a mod can also.
Kraize
Q: My Fuze keyboard is all messed up after I flashed a different rom!
A: Download this cab file and install. Then soft reset.
Click to expand...
Click to collapse
Q: How can I get rid of all that bloatware on the AT&T rom?
aruppenthal said:
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen hit the stylus reset.
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
NOTE: The programs will not be organized in folder if you do this. Just a big Programs Folder
Click to expand...
Click to collapse
Q: TF3D is very slow and laggy. Sometimes it doesn't respond at all.
Install: Advanced Configuration Tool v3.3 and enable various tweaks and also install Diamond TF3D Config 0.6.7 and enable the various tweaks to make TF3D faster. If this doesn't work, flash a custom rom and see if that makes a difference.
Click to expand...
Click to collapse
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
Noob question. Go here and search. You'll find your answer. I can't do everything for you.
Click to expand...
Click to collapse
I got one... my scrolling through the different tabs seems to work at time and other times does not scroll at all is this laggy or am i using the tf3d wrong?
rymonday said:
I got one... my scrolling through the different tabs seems to work at time and other times does not scroll at all is this laggy or am i using the tf3d wrong?
Click to expand...
Click to collapse
Added to 1st post.
Thanks for the links -- hope those programs help!
got another one.....
I get a popup keyboard alot... I installed the null keyboard and it helps but find the bottom bar popping up very annoying.
How do i get rid of that?
i tried a theme called vista ultimate which i liked alot but when i slide the keyboard out it doesnt go to the launcher screen it turns tf3d on its side but of course it doesnt work that way
how do we know which themes will actually work with our pro?
or how do i make the launcher come up with that theme
Good idea:
My Fuze is always connected via EDGE, even though I live in a 3G serviced area (San Francisco Bay Area). I'm assuming the phone is choosing the stronger of the two signals by default, which is fine for voice, but EDGE is excruciatingly slow for streaming video. Is there a way to force the phone to use the 3G connection?
Reply With Quote
dokomo said:
Good idea:
My Fuze is always connected via EDGE, even though I live in a 3G serviced area (San Francisco Bay Area). I'm assuming the phone is choosing the stronger of the two signals by default, which is fine for voice, but EDGE is excruciatingly slow for streaming video. Is there a way to force the phone to use the 3G connection?
Reply With Quote
Click to expand...
Click to collapse
I have just answered this for you in the post you started.
lbhocky19 said:
i tried a theme called vista ultimate which i liked alot but when i slide the keyboard out it doesnt go to the launcher screen it turns tf3d on its side but of course it doesnt work that way
how do we know which themes will actually work with our pro?
or how do i make the launcher come up with that theme
Click to expand...
Click to collapse
A lot of the diamond themes wont work on the Fuze in landscape mode. I think that Vista Ultimate is one of Nisse's themes so maybe send him a message and see if he has a version for the Fuze.
Kraize
Make note in the skip the bloat that they must also install the HTC_PPC_opera_9 cab from windows if they want the internet tab of tf3d to work.
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
As Kraize said most you can find in the thread he linked. However, so far none of the background changing mods have worked foe me. It completely breaks TF3d. I think it will take a few days to figure out this versions backgrounds.
MODS please sticky this. Its already getting insane with Fuze posts.
Has anybody tried to see if they can get the phone unlocked to be used outside of the united states, or to be used on another carrier?
Q: How to enable and keep HSDPA? Or am I the only one with this issue?
starstreak said:
Has anybody tried to see if they can get the phone unlocked to be used outside of the united states, or to be used on another carrier?
Click to expand...
Click to collapse
Olipro will unlock it for a small fee. See the sticky in the raphael rom development forum.
aruppenthal said:
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
As Kraize said most you can find in the thread he linked. However, so far none of the background changing mods have worked foe me. It completely breaks TF3d. I think it will take a few days to figure out this versions backgrounds.
MODS please sticky this. Its already getting insane with Fuze posts.
Click to expand...
Click to collapse
I downloaded the TF3D config tool on the diamond thread and the HTC Black Theme posted elsewhere and it worked for me. One thing i did notice is that the splash screen with the AT&T logo didn't appear. Looks much better than the AT&T theme...
FUZE and VIsta WMDC need help
Just got my fuze last night. Tried installing the software on my laptop - for some reason the WMDC does not recognize the device. Evey time I hook up the fuze the laptop tried to install a driver. NOw my 8525 doesn't work with the laptop too! Any help sorting this all out would be greatly appreciated. I mainly need to get my contacts from the 8525 (running WM5) to the Fuze.
Thanks
Kriaze, Thank you so much for starting this thread. This is going to be so helpfull to all us new Fuze owners. This is why XDA is the GREATEST for us HTC users.
So many thanks to EVERYONE...
Beachboyde/Jon
I joined this site just for the release of the Fuze/Touch Pro although I'm waiting for Black Friday to purchase. I have 2 questions for those that already have it:
Does the Fuze come with the USB-headphones like the Touch Pro?
If not, would the one from Sprint work?
hg23 said:
I joined this site just for the release of the Fuze/Touch Pro although I'm waiting for Black Friday to purchase. I have 2 questions for those that already have it:
Does the Fuze come with the USB-headphones like the Touch Pro?
If not, would the one from Sprint work?
Click to expand...
Click to collapse
It does not come with the headphones but does come with an adapter to allow you to use 2.5 and 3.5mm headphones of your choice. It also allows the fm radio to work just fine.
Edit: and yes the sprint headphone will work. They are just the generic htc usb headphones/headset.
Sashimi?
Forgive me as it has been a long time since i have been a part of these forums. When i was using my tilt around the time 6.1 official came out i had sashimi set up perfect for post flashes. I just got my sashimi folder back to where i wanted it to install on the FUZE yet it is erroring out due to screen resolution sizes. Does anyone know if a new version was released to support the vga devices or did this die with the author being banned.... Thanks for the help!
Hi!
From time to time on various ROMs threads someone is asking for other dialer then it was cooked into ROM.
Some of us likes the Topaz dialer without conference calls option but with curtain preventing key presses while talking and some of us prefer Rhodium dialer without curtain but with conference calls (they don't care about screen presses or they use some 3rd party tools to prevent this).
Because it's not possible to please us all by all chiefs we need to customize it by ourselves . For this purpose I've created three CABs: One for Topaz and two for Rhodium dialer (6.5 and 6.5.3 version).
Topaz dialer is available here:
http://rapidshare.com/files/300358400/Qbus_Topaz_Dialer.cab
...and Rhodium dialer is available here:
http://rapidshare.com/files/301083458/Qbus_Rhodium_Dialer.cab
...and Rhodium dialer for Windows 6.5.3 (fixed scrollbar bug) is available here:
http://rapidshare.com/files/340537139/Qbus_Rhodium_Dialer_for_653.cab
Please be aware that all of these CABs contain all files from original OEM so they override top icons (phcanOverbmp.dll).
All dialers are compatible only with OEM's up to 2.17!
Well... I would like one with conference calls and with curtain too! Is this possible on the Topaz?
Thx
Dont install these they are very very crap. Also u can no longer dial from contact. Had to hard reset.
Cheers !
BillyBoy said:
Well... I would like one with conference calls and with curtain too! Is this possible on the Topaz?
Thx
Click to expand...
Click to collapse
No it's unfortunatelly not possible.
PauloJ5 said:
Dont install these they are very very crap. Also u can no longer dial from contact. Had to hard reset.
Cheers !
Click to expand...
Click to collapse
You had made something wrong . They were tested by me in every detail before uploading them here (the ROM I used was TESS 3.8).
qbus00 said:
You had made something wrong . They were tested by me in every detail before uploading them here (the ROM I used was TESS 3.8).
Click to expand...
Click to collapse
OK so they dont work on Duttys R0 ROM.
I have a Topaz with a Topaz dialer. I don't like the curtain at all. I have tried the Rhodium dialer before. The problem with this dialer is that when you disconnect your bluetooth headset, it comes up with a silly message, something like "now you will have to put the phone to your ear to hear".... This is so annoying that I will stick with the Topaz one and live with the curtain....
Crappy dailer...
Its not working for me as well.... Im using Dutty Holy Grail R0.. Ive downloaded ur Rhodium dailer and just install the cab and restart.. then i check out the dailer..its not even close to rhodium dailer and nothin comes out on screen when im on the phone.. but the worst part is that ur cab cannot be uninstall and i hv to re-flash my topaz just cuz of that... i think u better check out ur cab first before publishing it...
Works perfect on UDK's ROM. But, does not work with Dutty's.
I didn't like the Rhodium dialer. I cook with the dialer from the Pure, Phone Canvas 4... much simplier so less screw ups.
65coupei6 said:
Works perfect on UDK's ROM. But, does not work with Dutty's.
Click to expand...
Click to collapse
What udK Rom did you try it on? Would like to use it on udK's Leo R5 [GER]
Thanks for feedback
Dear qbus00,
do you have any chance to provide this Rhodium dialer also in German?
Thanks!
GeScha said:
Dear qbus00,
do you have any chance to provide this Rhodium dialer also in German?
Thanks!
Click to expand...
Click to collapse
If I only get German OEM (or learn on how to disassembly HTC ROMs to get one).
Hi qbus00,
thanks, but I guess its not necessary ;-)
I installed your Rhodium Dialer on
udK Leo R5 WM6.5 - Build 21869.5.0.82 - Base v2.31 [GER]
and:
It works great!
- Supports VideoCall AND ConfCall
- Works in Landscape mode (if enabled)
- Has NO curtain in front of the buttons (what some don't like)
- I do NOT get this crazy message if headset is disconnected from bluetooth.
I don't know why german just works, and why this strange bluetooth message doesn't pop up any more...and honestly I don't care. My Topaz is now99,9% perfect!
Thanks again,
GeScha
PS: Conflicts with YouTube player: If YouTube (seperate) App is used, sound playback is not working as soon as first time tried for all youtube till next softreset.
YouTube via Opera works (also playback incl. audio) as long as YouTune App itself was not started.
PS2: One bug to report:
In Landscapemode the line above the dialer, where the currently typed numbers, the carrier (and if enabled the battery status) is shown, doesn't work.
Regarding the Display bug in landscape mode:
I guess it might only be the backgroundcolour setting from the display area of the dialer in landscape mode, that seems to be white (in landscape) instead of gray (as in portrait)
That might be the reason why the typing isn't seen in landscape.
Any idea where to change the colour of the display area of the dialer?
PS:
The YouTube "no sound" big seems also to be connected to this dialer.
When Rhodium dialler is installed, youtube app doesnt playback sound, after installing original Topaz dialer again, sound is also working again.
qbus:
Any idea which of the *.dll's that are installed with Rodhium dialler could cause this issue?
Could you maybe put together a package, where you do NOT update the dll's for Rhodium dialler or isn't it working with the newer dll's?
Thank you, my friend!
I am looking for them!
Some issues
First of all a big thank you for sharing this, I've been searching hard.
A couple of issues, Rhodium Dialer:
- on Energy ROM it does not fit correctly, and replaces some icons (sim, battery .... )
- It cannot be removed: I think making the CAB uninstallable would make it possible.
Anyway, let me say I appreciate much this work, and I'll keep looking at this.
Regards
Hi guys..
Can anyone upload this to someplace other than RapidShare? MegaUpload or something.. I can't seem to download from RS.
Thanks!
installation unsuccessful.
is there anything to disable before installing this..?
i always fail on installation. im using winmo 6.5 barebone.
GeScha said:
Hi qbus00,
thanks, but I guess its not necessary ;-)
I installed your Rhodium Dialer on
udK Leo R5 WM6.5 - Build 21869.5.0.82 - Base v2.31 [GER]
and:
It works great!
- Supports VideoCall AND ConfCall
Hi GeSha
Have you really tried videocall?
I tried it too and yes it supports videocall and concall but I really tried videocall with a motorola v9 and it failed.
I can call it but during the connection nothing hearn, nothing seen.
However v9 can't call hd2 because call is not permissed
Click to expand...
Click to collapse
Hello, I made a screen in Photoshop and would like to know if someone can make a skin for incomeing calls who look like that.
I removed all curtains for an advanced look.
The programm should not cause any problme with my beloved iDialer & iContact, it should be only about the incomeing calls.
What do you think?
do you mean that when a person calls you his picture will be on the entire screen?
Cause that will be amazing for sure!
Yes, right
There is not the smallest reason for HTC to program it the way they did.
That small Images are quit useless. Only 1m away, you cannot recognize the person anymore and to read the name it is also to far.
That could not be too heavy to be done for the guys on XDA.
S2U2 by AC. Give it a try.
richierich said:
S2U2 by AC. Give it a try.
Click to expand...
Click to collapse
it doesnt seem to deal with contact picture size from what I read...
And would´nt it fight with my baby (iDialer)?
just try it man, it wonk kill your device, its a very good program
hannes_slanec said:
That small Images are quit useless. Only 1m away, you cannot recognize the person anymore and to read the name it is also to far.
Click to expand...
Click to collapse
I don't mind if someone would do that for you, but I would like to say that I like the images as they are, I don't think that they are useless. To be honest, I think that the fullscreen image looks very ugly.
yosi199 said:
it doesnt seem to deal with contact picture size from what I read...
Click to expand...
Click to collapse
As for now you can't use caller ID in S2U2 on HD2 devices because of this caller ID in WM6.5. So untill someone is making this guys idea come through or if A_C is making his S2U2 to work on WM6.5 devices we're stuck with this small contact picture.
So it is unnecessery to try S2U2, wont work? What means S2U2 by the way?
hannes_slanec said:
So it is unnecessery to try S2U2, wont work? What means S2U2 by the way?
Click to expand...
Click to collapse
For now it is unless A_C have released something new that works on WM6.5 lockscreens...
Slide2Unlock2 where 2 is means to i think!
I found a lot of thinks with S2U2, are that different cabs or is it a big programm that contains that all?
Would like the "Slide to Unlock" .cab only.
Is it for free or does it cost something?
Thanks and regards
Hannes Slanec
I have using Inesoft Phone (it has skinable caller id)
My current skin attached as example
It can also lock screen from acident taps before answer (like slide to answer)
But it's shareware
update : slide 2 unlock version 2.21 FULLSCREEN ID
People,
Download slide2unlock version 2.21, then install BSB Tweaks and
kill all windows Mobile sliders with these tweaks.
THen configure slide to unlock to show FULLSCREEN CALLER-ID.
It works like a charm and even looks better that the drawing from the OP.
Just do it
lucid said:
People,
Download slide2unlock version 2.21, then install BSB Tweaks and
kill all windows Mobile sliders with these tweaks.
THen configure slide to unlock to show FULLSCREEN CALLER-ID.
It works like a charm and even looks better that the drawing from the OP.
Just do it
Click to expand...
Click to collapse
I hope I get all you said done
Where can I find the cabs of slide2unlock and BSB Tweaks?
Thanks for the effort!
s2u2 is found here:
http://s2u2.ac-s2.com/
and BSBTweak is here on xda-developers (Leo->apps)