Related
Hello, I'm looking for a good remote desktop app that works with the 750. I am currently using LogMeIn on my pc's but they don't support the 750. Thanks for your help, artman.
I also have a Treo 750 with WinMob 6.0 and I also use logmein on my PC. I can confirm that it works with the 750! Just go to logmein.com with internet explorer on the Treo 750. After you login you will be asked to install a windows mobile plugin and after this you have to continue with the link provided.
Et voila it works!
Thank you for your reply. I will try again and post my results. artman1
I can't seem to find the plugin. I am stuck in a loop, I log in then click on the computer that I need to access then I go back to the log in page. that happens over and over. I guess I need the WM 6 plugin. does anyone know where I can get it? Thanks, artman1
I can't seem to get intellisync to recognize the touch pro. I click configure and a window pops up and just says connect any windows ce device. No matter what i do it stays like this. I've uninstalled activesync and still nothing.
Has anyone had any trouble with this as well?
Maybe a solution
I haven't looked up what intellisync is, but if it is the same as activesync I might know the solution.
I found that when you run activesync on your touch pro, and then connect your device to your pc, the program ask you how you want to connect the device to your pc. You can choose to use activesync, connect as HDD, and something else.
Choosing to use active sync might solve the problem, else check your firewall.
I just read somewhere you still need activesync to make the connection.
Yea i chose activesync and i disabled my firewall cause i believe wm phones connect to active sync through a port which is stupid but oh well. Intellisync is basically the same as activesync but u can sync with other programs besides outlook.
Still hoping for a solution here but then again i'm not sure if my tilt worked either. This is the first time i've tried it.
Just tested the tilt and it isn't recognized either.
For all those who use intellisync i have been reading somethings online and i don't think its compatible with windows mobile 6.1. Does anyone have it working on any WM6.1 device?
I'm using Intellisync on WM6.1 (Htc Diamond) and it's OK.
Hmmm how?? What version are you using?
Intellisync Mobile Suite 9.0
ClientShell.exe 8.1.0.54
SyncMail.exe 8.0.56.1
Corporate edition (synchronize with LotusDomino)
jstoki said:
Intellisync Mobile Suite 9.0
ClientShell.exe 8.1.0.54
SyncMail.exe 8.0.56.1
Corporate edition (synchronize with LotusDomino)
Click to expand...
Click to collapse
Thanks i'm going to have to try this out.
I have the same problem. I just bought the Samsung Omnia and Intellisync does not work on the WM6.1 does anyone have a latest version of this software or please prove a shortcut of where I can download it from.
We also use a Lotus Domino.
Best regards.
I have yet to find a intellisync that will work with my touch pro so i guess i can be of no help.....
Hi again.
I try to install some voice command or voice dial software on my Mega and i have some problems.
By first i can't install/use "Microsoft Voice Command", after install and using "voice button" my speaker just play "hype". Few days ago i install this soft and it work for some time, but i hard reset device and now there is no way and version to install it i try:
- 1.6.21725
- 1.6.20771
- 1.6.19971
- 1.6.19965
- 1.6.19214
- 1.6.17913
After this i try alternative soft like:
- Voice Dialer
- Voice2Go
- LookUp
all this soft not work so good as i want.
Before HTC T3333 Mega i use Nokia N95 and i must say it has 1000 times better speech recognition than all i try-it till now on WM6.5.
Can someone tell is there is some other soft worth to try or is there is working version of Microsoft Voice Command for Mega?
Many Thanks.
Ygrek-Ix said:
Hi again.
I try to install some voice command or voice dial software on my Mega and i have some problems.
By first i can't install/use "Microsoft Voice Command", after install and using "voice button" my speaker just play "hype". Few days ago i install this soft and it work for some time, but i hard reset device and now there is no way and version to install it i try:
- 1.6.21725
- 1.6.20771
- 1.6.19971
- 1.6.19965
- 1.6.19214
- 1.6.17913
After this i try alternative soft like:
- Voice Dialer
- Voice2Go
- LookUp
all this soft not work so good as i want.
Before HTC T3333 Mega i use Nokia N95 and i must say it has 1000 times better speech recognition than all i try-it till now on WM6.5.
Can someone tell is there is some other soft worth to try or is there is working version of Microsoft Voice Command for Mega?
Many Thanks.
Click to expand...
Click to collapse
That is good to know! Im getting my touch2 next week. just one question did u completely un install the other package coz sometimes it conflicts with each other.
Thanks
Yes.
Mega has no any voice recognition software installed by default, so i install it each one separately including device reboot or some times even hard reset.
I try to change language, install net framework, uninstall all other software on device. Nothing help.
Ygrek-Ix said:
Yes.
Mega has no any voice recognition software installed by default, so i install it each one separately including device reboot or some times even hard reset.
I try to change language, install net framework, uninstall all other software on device. Nothing help.
Click to expand...
Click to collapse
Ok let me try when mine comes. I will let u know.
Thanks.
If you want i have "demo" versions of all this softs above
Ygrek-Ix said:
Thanks.
If you want i have "demo" versions of all this softs above
Click to expand...
Click to collapse
DEMO version? I have the MS Voice command here. Let me try it when my touch2 comes. the version I have is 1.604622.0 MSVC.
thanks
I found "Cyberon Voice Command" which work perfect and support my native language(Polish). Works perfect but bluetooth can't call voice command
If i solve this problem i win!
I got the same problem on a Samsung SGH i780, on which the Voice Command is not installed by default.
I spent a couple of days on this issue before give up.
So, I hope you will find a solution on the Mega
About "Microsoft Voice Command":
- After installation there was no correct/any entry in "HKLM\SOFTWARE\OEM\VoiceCommand". I correct the path value, but I left the handset in the work, so i can't test it now.
- MVC with connetion with HTC Touch2 Mega have bug, after too long press "Send" button it doesn't work.
maybe you can give us a link to MS voice command
Microsoft Voice Command 1.6.21725
Here you go: RapidShare Link Can be downloaded 10 times
I can't upload it as attachment, so if any one can please do this now in this thread. Thanks.
MS voice Command
Please refer to my posting utilities u will find the link to the ms voice command 1.6
not working
ms voice command does nor work on my htc. it starts and there is the icon in taskbar. but one second later program closes and icon go away ...
jürgen
drjv said:
ms voice command does nor work on my htc. it starts and there is the icon in taskbar. but one second later program closes and icon go away ...
jürgen
Click to expand...
Click to collapse
it works with my mega just fine
drjv said:
ms voice command does nor work on my htc. it starts and there is the icon in taskbar. but one second later program closes and icon go away ...
jürgen
Click to expand...
Click to collapse
What version you use?
so does MS VC works on Touch2? I would like to also control coreplayer using voice commands, anybody hear about that possibility? I'm going to ask on coreplayer forum about that. Would be really awesome to control multimedia and phone via voice commands
On my htc works fine, i don't know how about cooperation with coreplayer.
Tried installing MS Voice command .. but after installing I couldnt find it in the programs ..dont know where it has gone !!
I'm surprised not one of you has mentioned "Tell Me"
get MSVC installed, google samsung TellMe, download and install, works perfectly on my touch 2, well, 90% but thats mostly my accent that causes problems.
So what.... Is there any Voice-Dailing Software, that works with Touch2 AND a Bluetooth-Headset-Button?
I use win 6.1 with Voice command 1.6.21725 and Spb Shell 3.5 but
when i press left button, which i assign with Win voice Command, after the beep sound, non of the commands that maintained from their site are working.
What i do wrong?
Thanks
amnis said:
I use win 6.1 with Voice command 1.6.21725 and Spb Shell 3.5 but
when i press left button, which i assign with Win voice Command, after the beep sound, non of the commands that maintained from their site are working.
What i do wrong?
Thanks
Click to expand...
Click to collapse
I have MSVC1.6.19965 working perfectly on 6.5
With Spb Shell on your phone?
amnis said:
With Spb Shell on your phone?
Click to expand...
Click to collapse
Not currently running mobile shell but it shouldn't matter. One does not conflict with the other.
Somewhere i aw this response:
"Those of you with a HD2 or a TP2, keep in mind that those phones use a Widcomm BT stack instead of the usual MS Stack... The idiots at HTC have decided to change this on their new phones.... MANY people have complained of issues. You can activate the program using your BT headset, but all sounds and commands from this application will come from the speaker on the phone. Phone calls dialled in or out will still be connected through the headset but you won't get caller ID.
I think HTC made a huge mistake changing to the Widcomm stack. Many users have said that although the Widcomm stack has a prettier interface and is generally more stable, it is not as advanced as the MS stack and therefore won't play nice with many applications and equipment (car kits, etc). The MS stack is still considered the standard and more apps are written using that as the assumed base/stack. This is also not something that is easily cooked into a custom ROM. You can't simply change the stack... its too tightly integrated and quite difficult to just change. The only possibility is if HTC releases a base ROM for cooks to play with that may have updated Widcomm stack which by some chance will work with MSVC.
Also, on the Handango site, it shows that MSVC was updated late Nov! I think I read somewhere that MS was updating it slightly to allow it to work with the HD2 or TP2... I could be wrong. Anyone out there has a copy we could try? I have no idea what the version number is although it should still be 1.6.xxxxx "
What does this mean ?
Bruce Inman said:
I have MSVC1.6.19965 working perfectly on 6.5
Click to expand...
Click to collapse
where can i find it? is this the ultimate version?
mikawa said:
where can i find it? is this the ultimate version?
Click to expand...
Click to collapse
I can't post me copy as it is no longer freeware but you should be able to find it in a search.
If not PM me with your email.
is anywhere something to change language? i would like to have italian!
i have a problem with this program.... when i install the cab, it says "the installation is not completed, please reset the phone and retry"
what can i do? and then i can't find the icon in start menu....where can i find it?? it's a strange thing!
mikawa said:
is anywhere something to change language? i would like to have italian!
Click to expand...
Click to collapse
I also have a US version 1.6.19209 and want another language. Maybe you can look on the torrents site. But probably you'll find US versions. But you also knows that's illegal. MS Voice Command is no freeware.
mikawa said:
i have a problem with this program.... when i install the cab, it says "the installation is not completed, please reset the phone and retry"
what can i do? and then i can't find the icon in start menu....where can i find it?? it's a strange thing!
Click to expand...
Click to collapse
Disregard error, it will run fine.
Looking for a VNC app for Windows Mobile wich can acces the Pc by the phone ?
What progs are out there ?
It should come with Remote Desktop already installed. That works a treat
yeah how does that work exactly because I didn't really got that working, should I run an application on the PC aswell?
Well i think soo!
The app is there for iphone for example! so there should be a simular to WM ?
I havnt yet found any app, thats why im here
You have to enable remote desktop connections on your PC and then the remote desktop app that comes as standard on your phone will work. This has been a basic function for WM phones for a long time.
(You will also need to allow traffic on port 3389 through your firewall, if you have one.)
This version works fine for me: http://forum.xda-developers.com/showthread.php?t=445903
I use .netvnc app (cannot post link but google it its first hit)
You have to ENABLE it for a GIVEN login ID on your PC. You will be prompted for this ID when you use the RDC app on the HD2
johncmolyneux said:
You have to enable remote desktop connections on your PC and then the remote desktop app that comes as standard on your phone will work. This has been a basic function for WM phones for a long time.
(You will also need to allow traffic on port 3389 through your firewall, if you have one.)
Click to expand...
Click to collapse
Can you plz tell me how to do it ?
I havnt been able to do it yet! i have win 7
Please have a look at this fantastic tutorial. Found it via google, used it myself and it works now!
de Wolfe said:
Please have a look at this fantastic tutorial. Found it via google, used it myself and it works now!
Click to expand...
Click to collapse
Yes I look but I dont find a link ....
Oh sorry, I'm an idiot Here you go: http://forum.xda-developers.com/showthread.php?t=533664
i have aproblem with keyboard! How can i open it in full screen mode?
Thanks mate i will now read and try
can you post a link please?
Hi,
I have the same problem with keyboard. When I enter Full screen I cannot activate it or go out of fullscreen mode.
Is it possible to connect with higher resolution than 800 x 480 ?
Is there any alternative client ?
iPhone with jaduu or mocha vnc is great. Why there is no good software for HD2 :/ ?
Hi, im new here.
Using remote desktop has a few problems. Especially the fact it has no keyboard. Also sound is missing. Another problem is that the remote desktop installed to basic editions if windows (on the pc) does not support remote server, it can only be used as a client to another pc. I found a patch someone on this forum made than can get around this problem. But despite the fact mine connects fine, i rarely use it as it has very little functionality!
If it is important that you can connect to your pc i hear vnc is much better for it as it has full functionality. Dont know if there is a similar free version available as vnc is about £50.
hooope this helps buddy
Keyboard: use the on-screen-keyboard or a BTK with your HD2, works like a charm.
Resolution: Fairly sure the answer is no.
Why use vnc when you have RDC, its waaaaay better.
VNC does not limit resolution. That makes RDP useless for me :/
There is another solution but I have not tried it yet
Z2 Remote2PC I will try it today
---
Can anybody start this java app -- VNC+ ?? I only get "press any key" and keyboard doesn't do the trick :/
website
rdmplus . com / vnc
I have tested GRemote Pro .. but cant get it working, and its Damnnnnnn slow
Real NVC havnt found one yet? can any one link?
The Bulit in software in hd2 .cant get it to connect to my pc (No damn good spet by step guide )