Hello,
I'm trying to pair a 750 with a JVC car deck. The JVC displays an error and the Treo locks up during the pair process. A soft reset is needed after every pairing trial.
Does anyone share the same setup ?
kelbers said:
Hello,
I'm trying to pair a 750 with a JVC car deck. The JVC displays an error and the Treo locks up during the pair process. A soft reset is needed after every pairing trial.
Does anyone share the same setup ?
Click to expand...
Click to collapse
I have the same problem with my HTC P4350. The JVC gives an error and my phone can't be used anymore, softreset or power off is needed.
Still looking for an answer
Strange powers took over my HTC, I tried to connect again today and now it works.
Don't know what I did other than before, but now everything works fine
I have a kenwood BT in my car and the pairing with my 750 works fine, my problem is syncing the phonebook. It only sees voicemail and rogers support number. I tried putting my contacts on the sim card and still no luck. Anybody have any ideas?
Thanks
Related
i'm trying to pair the headset with the diamond.
after i entered the pin code (0000) i get an error message: "your device did not connect with VMX 100. the connection failed or the passcode is incorrect".
i tried several times but nothing.
with another phone (nokia 6210) it works OK.
someone?
Sennheiser VMX100 is incompatible with Touch Cruise.. This is known issue...
Sorry, but maybe incomp. with Diamond too...
what the [email protected]%k?
SENNHEISER BLUETOOTH FLX 70 IN EAR FLX70 doesn't work too????
i never heared about that.
bt headset that not work with every phone.
is there a way to fix it?
changing the radio version will work?
Vmx 100 Does Work With Diamond
ishaked said:
i'm trying to pair the headset with the diamond.
after i entered the pin code (0000) i get an error message: "your device did not connect with VMX 100. the connection failed or the passcode is incorrect".
Click to expand...
Click to collapse
OK, I managed to suss this out, it was purely by accident as this it totally counter-intuituve.
When you go to pair it, the phone finds it and asks for the password, DON'T enter one, just hit the NEXT button. Two things will happen, first it will actually go "Ping" and a screen will come up telling you the headset wants to connect and asking for your password, which you then enter and it pairs AND second, it also pops up the nasty message about not pairing but by this stage it has already paired so it is no issue.
bit of a flaky implementation, but once paired it works OK.
Nice find
flashgordonv said:
first it will actually go "Ping" and a screen will come up telling you the headset wants to connect and asking for your password, which you then enter and it pairs AND second, it also pops up the nasty message about not pairing but by this stage it has already paired so it is no issue.
.
Click to expand...
Click to collapse
i only get the nasty message.
Thanks Flashgordonv - finally got VMX100 to work on my HTC Touch Pro
flashgordonv said:
OK, I managed to suss this out, it was purely by accident as this it totally counter-intuitive.
Click to expand...
Click to collapse
Beautiful catch!! I had the same problem with a Touch Cruise, and these instructions worked like a charm.
Thanks.
i have the same problem, i own a HTC Touch Pro and i cant pair the headset.
i get too nasty messages and no paired device
Dear sir,
1. I have purchased a VMx 100 sennheiser bluetooth headset. wish to pair it with my Dell streak. It pairs up well. But when call comes, there is no transfer of audio. Will anyone can help me in solving this?
2. VMX 100 manual says that if user wishes to use same bluetooth headset with second device (in my case notebook), it shud be paired manually. Dont know how to do?
because my notebook doesnt recognize VMX 100 signal at all.
how to go about?
thanks
My touch pro seems to have real bluetooth issues with my JVC KD-NX5000 stereo system. My kaiser worked flawlessly with it but with the touch pro it wont pair at times and when it does it wont let me use any of the many functions that the stereo offers (voice dialing, downloaded phonebook, etc) I assume this is a problem with the ms bluetooth stack and was wondering how tough of a job it would be to switch to a broadcomm stack or if anyone has thought about making a custom rom with the broadcomm stack. Just curious if Im the only one with issues with wm 6.1 and bluetooth.
i have the same problem with my diamnd anbd jvc car audio
Slightly OT rant:-
I had the opposite problem with pioneer + broadcom...
Pioneer only looks for handsets which identify themselves as phone or smartphone, and my device identified itself as a pda.
I actually told pioneer about the problem, and rather than forwarding on to the developers, I got a stock reply:-
"This phone is not on our compatibility list" (so we don't care)
So I went and got an MS based phone (you can change it to smartphone with a regedit).
Never buying pioneer again...
- Anthony
Similiar issue with my opel carkit.
Tried to make the broadcom stack working, but got a memory error when opening its blue tooth manager.
After uninstalling, bluetooth didn't work at all anymore, needed to perform a hard reset.
Has anyone successfully installed the broadcom BT stack on the touchpro/raphael?
I found that my Touch Pro would pair and then drop out when connecting to my Kenwood DDX5032 car stereo bluetooth adaptor. I couldn't dial from the Kenwood kit, couldn't use A2DP (wouldn't even connect), and really couldn't use any Headset Profile functions at all.
I persisted with pairing and unpairing in different ways (you can initiate the pairing from the Kenwood itself rather than the phone), but nothing really worked.
Then trinode's post about changing a registry setting sent me down that track and now everything is working fine
I found the relevant setting from http://forum.xda-developers.com/showthread.php?t=290871, which is [HKLM\Software\Microsoft\Bluetooth\sys\COD], and then changed the HTC TP default value of '5898764' (decimal), to the value from my old Dopod838Pro, which was '5374228' (in decimal).
I didn't even need to repair the Kewood to the HTC TP - it just worked straight away, as if it said "Oh, sorry, did you want me to work? I thought you wanted me to be in 'stupid' mode! My bad - everything will work now."
So all good, and thanks to trinode for pointing me in the right direction.
Codenix.
After hard-resetting my Touch Pro to fix another separate issue, now this problem has come back and this time changing the COD value hasn't fixed it. It would appear my previous post may have attributed my success to the wrong thing
The search for the answer continues!
I found a firmware update for my Kenwood's bluetooth adaptor which fixed the problem. I don't know why it ever worked at all before this update, but there you go!
I'll create a separate thread to share this with others in case anyone else out there has a Kenwood bluetooth kit and a Touch Pro or a Diamond.
Thanks.
The thread I created re the Kenwood is at http://forum.xda-developers.com/showthread.php?p=2835805
@ Trinode
Pioneer sent my unit back, but never told me that my phone was not supported. Where did you flag the smartphone in the registry? Did it fix the BT connection/unti reboot issue? I had a AVIC F500BT (sold it) now have a AVIC X910BT same issue as the 500 had.
@ Trinode. I found the hack , tried it, but it still doesn't resolve my issue. Are there any other mods out there for the BT Stack prob?
Hello,
In my car I have the Parrot CK3000 evolution car kit installed.
I can pair it with my nexus without problems.
After pairing incoming and outgoing phone calls should be routed through the handset but that doesn't happen.
My wife's htc hero, after pairing with the same handset, easily allows to establish the connection beetwen the hero and the handset long pressing the "parrot 2.51C" item in bluetooth settings and clicking the "Connect" item.
Long pressing the same item on my nexus shows a popup menu where the only option available is unpair.
Did anybody manage to make this handset work with nexus one?
For your information my parrot car kit has software version 2.51C and restarting the phone, resetting parrot memory, unpairing and pairing again didn't make any difference.
Regards,
Francesco
have a look at:
http://www.parrot.com/forums/english/viewtopic.php?pid=25879#p25879
Although this is for a ck3100.
I have this kit too. I'm at work so I can't test the link you put up but I don't think it will work. The nexus actually pairs with the device, it just won't connect. and the 3100 has an lcd screen so it runs completely different software
I used Parrot CK3100 with HD2. Everything was good! The sync was working very good with tons of rom. I tried with Acer Liquid. It was good. But when I tried with Nexus One original rom and Cyanogen rom I had a big problem with number. I always store the mobile phone number the following form: +36XXXXXXXX. All other phone managed it perfectly but N1 not.
I can sync the number with Parrot but the number was the following format: 36X-XXX-XXXX
It is WRONG!! I can't call the number without "+" I tried with the latest Desire (A10) rom and everything is fine!!!! Like with HD2!!! But the pairing is horrible with the A10. So I use Desire rom now.
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
I managed to connect my CK3000 with N1 using the procedure that danimar1 describes.
No luck in copying my contacts to the parrot :/
Did anybody have success with this task?
F.
I've experienced this on other carkits too - it'll pair, but audio never transfers. Obviously a bug in the N1. I hope they fix it soon
In my case routing phone calls between parrot Ck3000 evolution and nexus one works.
The thing that I'm not able to do is to transfer my contacts.
Francesco
the ck3000 doesnt support contact syncing i dont think. that is the one bummer about android phones and bluetooth, no voice tag support. with my bb, it could use the phones voice recognition to voice dial from the car kit
danimar1 said:
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
Click to expand...
Click to collapse
when you unpaired, did you delet the phone from the parrot memory also?
doalittledanse said:
when you unpaired, did you delet the phone from the parrot memory also?
Click to expand...
Click to collapse
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
danimar1 said:
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
Click to expand...
Click to collapse
and what firmware is your ck3000 on? im assuming thats an issue for me because ive never updated mine and its still at 2.10 i think
I'm sorry I have a CK3100, but anyway I never updated it. I got it a little more than 2 years ago, so I don't think it would be a firmware version problem.
Hi.
Have read around the forum a little, and haven't found much info in regard to the problem I'm having...
Am currently using the Opensensation Rom from 13/05/2012...
I am unable to connect bluetooth to my car's handsfree bluetooth audio... I tried connecting it to a blackberry and my laptop, and worked fine. However, it connected in a different way to normal. Normally, I've had it ask for pin number, and put in the default 0000. However, on the blackberry, it came up saying something along the lines of "device trying to connect, number 2837346". On the phone, it said "ensure the number on other phone is 2837346" or whatever.
When I connect to the bluetooth in car, it says "Couldn't pair with Ford Audio because of an incorrect PIN or passkey". But, as said, it doesn't ask me to enter the passkey...
So, any ideas of what the problem is, or how I can solve it? Tried changing the radio to see if that would help, but no difference...
Please help me get this sorted. Need the handsfree for phone, and only just got this phone... All other phones previously have worked.
Well, it appears that this is a problem with the ROM itself, as using another ROM (Revelation HD 6.6.4 XE), and it pairs fine with my car bluetooth...
Has anybody else had trouble getting the Z3 to pair with your car's head unit? I have an Alpine CD player with bluetooth which paired fine with my Galaxy S4 but won't connect to the Z3. It fails because of an incorrect pin. However, the phone never prompts me to enter a pin. I've read that this is a known issue with Sony devices where they hard code the pin in as 0000 so if the device you're trying to pair with has it set to 1234 for example it will just fail. I've tried several suggestions such as trying to share a contact to the cd player via bluetooth to force the pairing as well as a couple of apps that try to pair with the device but they all seem to use the system's bluetooth pairing app.
Anybody else having this problem or know of a workaround/solution?
Thanks
Iam not sure if my situation is quiet the same but My bluetooth works fine when transferring pictures but recently tried to play music through bluetooth and although both devices paired up , They dont stay connected? It connects and then disconnects within a second or two!!
I found the solution to my issue in case it helps anybody else. With Alpine (perhaps others) you can only have 3 devices paired at once. My old phones were still stored so I had to clear them. So really it was just a case of terrible error messages. The head unit just said "Failed" when it didn't connect and the phone said incorrect password or pin so neither were helpful.