Hey, Guys!
I jumped the ship a while ago from MS and switched to the Mac. I'm currently using PocketMac for my connectivity to my Blue Angel phone and it works fine, except for installing .exe files. Most of the time, it says a .cab file cannot be found within the .exe file. I have no trouble installing .cab files, but I can't always find programs as .cabs. Anyone have any ideas on extracting the .cab files from the .exe to install on pocket pc? I've tried also using Virtual PC, but two problems exist. First of all, the usb connectivity doesn't work well and most of the time, at all, and second, I have Tiger and Virtual PC doesn't work at all on Tiger.
Thanks for any ideas!
Scott
the install exe files are often selfextracting zip files and you can often rename them to zip and copy out the cab file
Thanks, I'll try that!
I downloaded the lokiwiz02b .rar file and extracted it to my :C/ drive.
Now I'm trying to find that file (enablerapi.cab) but can't find it anywhere. The only one i see is winrar archive which I can't put on my pda.
can someone help me out on this one?
Thanks
unRAR it and put the .cab file into your device...
for some reason, I just can't find it. I have the lokiwiz02 rar file on my desktop, i extract it to my C: drive.. but I can't find that .cab file anywhere.
it is because you are being confused...the .cab file also opens with winRAR...dont unrar the cab file, just transfer it into your device, execute it, and then install on device
Here is the cab.
Cheers
hrb
thanks mate
are u unlocking the sim ? or only CID ?
I've loaded it !!
thank you very much!!
hrb said:
Here is the cab.
Cheers
hrb
Click to expand...
Click to collapse
Thanks for sharing~
Doesn't work on HTC Dual Touch Standard WM6.1 ROM...
Here is a step-by step instructions
1) Download the Lockwiz02b
2) Unzip Lockwiz02b
3) in there you can find EnableRapi.Cab
4) Copy it into your PDA
5) Now you can see EnableRapi.Cab in your PDA through Fileexplore
Note - you need to have Activesync install in your PC to perform the copy task
hi !
Most of our software are .exe files to be run from a PC and to be installed then on the PPC.
When one wants to perform a HR away from PC, it is then hard to quickly re-install all apps.
Having cab files stored in the SD card is the solution but what to do when no cab files are available only exe ?
My question is then the following : is there a possibility to extract CAB files from .exe files ?
Thx in advance
Hi,
Often the .exe is just a self extracting archive which you can open with winrar
doesn't always work, just right-click on the .exe en choose open with winrar...
also, when you try to install an exe file, the .cab is extracted and moved to you phone, that means you should be able to find the cab somewhere and copy it...
most of the time in \program files\microsoft active sync\(appname)
also, when you install an app, some of them ask you where to install it on your pc, in that directory you can find the cabs you need
now I'm just looking for a program that can make an cab installer that can be run on my phone and installs every cab to SD...
I found one, but it doesn't work... teksoft airwizard 1.1...
Bartus
at times one can also just rename it from .exe to .zip
yes copy from activesync folder is possible but i have the same problem only with this difference. On my working computer i have administrator rights and folder Program files is blocked for me. I need a program to extract cab form exe. WinRar does not work. Sorry for my bad english
well try this: after cab transferred to your device, don't install it (and don't cancel!!) , go to Windows\AppMgr , and see if a folder with the name of that program exists with a cab file in it ...
now I'm just looking for a program that can make an cab installer that can be run on my phone and installs every cab to SD...
I found one, but it doesn't work... teksoft airwizard 1.1...
Click to expand...
Click to collapse
try SettingsSaviour ... it has a silent install feature with which you can install many cabs at once, downside is silent isntall can't be used to install programs on SD, you'll have to manually choose Storage Card for each program...
Very comprehensive explanations ... thanks to all of you ! I gonna try and report if any further problems.
--------------------------------------------
After trying to change the extension of the .exe, I have to report that it works with one of the files I wanted to CABized.
To MODO : do I need to stamp this thread as SOLVED ?
Bonusbartus said:
Hi,
Often the .exe is just a self extracting archive which you can open with winrar
doesn't always work, just right-click on the .exe en choose open with winrar...
also, when you try to install an exe file, the .cab is extracted and moved to you phone, that means you should be able to find the cab somewhere and copy it...
most of the time in \program files\microsoft active sync\(appname)
also, when you install an app, some of them ask you where to install it on your pc, in that directory you can find the cabs you need
now I'm just looking for a program that can make an cab installer that can be run on my phone and installs every cab to SD...
I found one, but it doesn't work... teksoft airwizard 1.1...
Bartus
Click to expand...
Click to collapse
What I did to keep installed cab files was I created a new folder in my storage card and named it "CABS", then I did a registry tweak to where the cab file was not deleted after installation. Now whenever I download a cab file, I "save as", CABS folder(from the dropdown box) on my storage card.
DR400 said:
hi !
Most of our software are .exe files to be run from a PC and to be installed then on the PPC.
When one wants to perform a HR away from PC, it is then hard to quickly re-install all apps.
Having cab files stored in the SD card is the solution but what to do when no cab files are available only exe ?
My question is then the following : is there a possibility to extract CAB files from .exe files ?
Thx in advance
Click to expand...
Click to collapse
Just wants to mention a "universal" unpacker called UniExtract - http://legroom.net/software/uniextract - it can extract many .EXEs made by install tools. Also - check out MSCEInf - which can analyze an CAB-file - http://www.freewareppc.com/utilities/msceinf.shtml
Are you able to open a exe file on your device? 90% of the programs I like have exe files and I always get not a valid pocket pc application. I've even tried to rename exe to cab or zip, but doesn't work. The file extension being downloaded is shaded out in the file type box in the download dialog box and cannot be changed. I've tried programs to convert exe files to other extensions, but all they do is convert after the downloaded exe files have already been installed.
hotdog53 said:
Are you able to open a exe file on your device? 90% of the programs I like have exe files and I always get not a valid pocket pc application. I've even tried to rename exe to cab or zip, but doesn't work. The file extension being downloaded is shaded out in the file type box in the download dialog box and cannot be changed. I've tried programs to convert exe files to other extensions, but all they do is convert after the downloaded exe files have already been installed.
Click to expand...
Click to collapse
thats because they are exe files that are supposed to be run on a normal PC. You download the exe to a PC, then when you have your Phone connected via Activesync, run the exe and it will install on your phone.
Alternativly, use WinRar on your PC to extract the exe, and copy the .cab files to your phone, then open them. (this does not always work, not all exe files are extractable)
DR400 said:
hi !
Most of our software are .exe files to be run from a PC and to be installed then on the PPC.
When one wants to perform a HR away from PC, it is then hard to quickly re-install all apps.
Having cab files stored in the SD card is the solution but what to do when no cab files are available only exe ?
My question is then the following : is there a possibility to extract CAB files from .exe files ?
Thx in advance
Click to expand...
Click to collapse
My solution is:
1) keep PDA disconnected (no active sync session)
2) install exe as usual and, when standard installation dialog will appear, go on (later cab installation will begin when you'll connect phone to pc)
3) open regedit.exe
4) go to this key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\AppMgr\Apps
5) there you'll find a list of installable cabs via active sync
6) under each application, the value ListCabFiles is the name of cab file and the value InstallDir is its position of file system.
Remember to uninstall exe after you copy/move the cab file (or delete application key) otherwise installation of cab files will start on next activesync session!!
Simple, do you agree?
yeh... sure i cant use activesync, so i just extract the exes seems easy enough
mugglesquop said:
thats because they are exe files that are supposed to be run on a normal PC. You download the exe to a PC, then when you have your Phone connected via Activesync, run the exe and it will install on your phone.
Alternativly, use WinRar on your PC to extract the exe, and copy the .cab files to your phone, then open them. (this does not always work, not all exe files are extractable)
Click to expand...
Click to collapse
I use a program called pocketRAR like winRAR but for mobile win -extract files- get cab and run its that easy just did it with this calc.exe
Knocksock said:
Just wants to mention a "universal" unpacker called UniExtract - http://legroom.net/software/uniextract - it can extract many .EXEs made by install tools. Also - check out MSCEInf - which can analyze an CAB-file - http://www.freewareppc.com/utilities/msceinf.shtml
Click to expand...
Click to collapse
I have just used uniextract to unpak my Pocket informant, I think this utility will be a life saver for all those files that i can't get as CABS. I have a lot of problems with active sync but can easily transfer to SD card with card reader or WM5Storage.
Thanks you so much
exe programs which use activesync
always get cabs from the install programs
if just renaming the exe to zip don't let you extract the cab file manualy
an installation on a pc without a pda connected to active sync would leave the cab files somewhere so next time the pda is connected the cabs can be transfered
search for *.cab and find the one you're looking for on the computer
Ran the .exe, found the cab, copied it.
Thanks.
Oh and UniExtract looks like a great program so I'll probably be using that next time.
NOT ALL
Not all the apps can run on the SD... thats for sure
but always you can... use setingsaivour BTW you can edit some cabs that arent sign trusted or only read with cab manager and edit the cab to apply the default installation or tell it that you dont want to choose set default main or SD... save it and tadaaaa!
I always do that... change .exe to .rar or .zip see inside extract the cab and copy it to my Cab folder on sd... always edit the sd config... and run the User customization !
this is not only easy, but it works flawlessly,
thanks
why don't you try 7zip for pocket pc? is the best way and quick cuz you ccan estract your cab files right on your ppc
just go to menu and extract, works for executables for windows
Bonusbartus said:
Hi,
Often the .exe is just a self extracting archive which you can open with winrar
doesn't always work, just right-click on the .exe en choose open with winrar...
also, when you try to install an exe file, the .cab is extracted and moved to you phone, that means you should be able to find the cab somewhere and copy it...
most of the time in \program files\microsoft active sync\(appname)
also, when you install an app, some of them ask you where to install it on your pc, in that directory you can find the cabs you need
now I'm just looking for a program that can make an cab installer that can be run on my phone and installs every cab to SD...
I found one, but it doesn't work... teksoft airwizard 1.1...
Bartus
Click to expand...
Click to collapse
Not to get off subject but teksoft is just one way. I know there is a nother and I can't remember where it was, but I'll keep looking for the cab install program and let you know where it is or provide a link, if I find it.
hey ppl,,
is there a way to get the cab file from a EXE setup..
i have many EXE install file on my phone.. but i cant install them by phone.. they can be only installed on PC..
i want to get the CAB file from inside them.. and put into my phone. then isntall on PDA..
how can i do that???
Try opening the file on your PC with either WinZip or WinRAR, you may find the CAB somewhere inside.
The other way is to run the install on your PC and before you connect your PDA search the PC for the CAB file and copy it somewhere safe.
hi all,
heres a silly newb question, i downloaded the TCPMP but have no idea at all of how to get this or any app working, please help, I have copied into the program files directory on hd2 and get nothing happening when opening setup, what am i doing wrong.
thanks Paul.
if it's a cab file don't open it just transfer it to the pda and run it
if it's an exe file then most likely it's an windows install program which should be run on the pc and then it use activesync to transfer the cab file inside it to the pda and then it runs it