Related
How does one extract a CAB from a ROM?
For instance if I want to cook my own ROM, but I want to use some of the applications in say Dutty's latest release, how do I get those cab packages to install on my own?
Particularly, i am interested in pulling the latest remote desktop off of the latest test Tilt ROM because it has the ability to map the mobile's local storage.
thanks!
one word: RTFW.
Read The FFing Wiki!!
If I could find it on here I wouldn't have posted asking about it.
This is the first of my posts that have been met with a response like this, but honestly go troll somewhere else. It is 0% productive to make responses like that. You are cluttering up the forum with usesless posts (as much as I would be guilty of if this is indeed described in the wiki). If it's in the wiki, why don't you point me to where?
The wiki isn't a single page as much as you'd like to believe, it' links to hundreds and thousands of posts of information.
I have CIM and SIM unlocked my device, flashed about 5 different ROMS and radios and done numerous other things with info I have gotten from the wiki. I read through the ROM cooking kitchen tutorials, but could not find anything which mentions my task at hand. I found information and links on the cooking tutorials to use OEM cabs that people had already extracted....but what if the one I want isn't there? Where is the info that tells me how to pull one OUT of a ROM (instead of putting one already extracted IN)?
So, either you are misunderstanding what i want to do, or else the way i am phrasing it is misleading, both to you and to myself, which is maybe why i can't find the info I want.
So, please your brilliance, point me to location in the Wiki that would describe a procedure where i would be able to extract a .CAB (like Windows Mobile Desktop) from the latest AT&T test ROM.
Otherwise your contributions to this thread are unwanted.
while maarten might have pointed you in the wrong direction, your thread is still a redundant one. if you tried to search, you will find lots of threads covering this subject. and yea, your search results are probably gonna end up with tons of threads that end up looking like this thread, but if you sift through the results.......and by sift i mean u really really sift, i promise you, you will find something useful.
Simple Answer...
...You can't extract a CAB from a ROM usually.
Explanation: In the ROM itself things like windows live are extracted from the CAB already and are installed, so the CAB itself is not there. If your original question was how do I extract the files needed to MAKE a CAB.. then that's more complex, a different question, and a waste of your time if you don't already know how to do it.
If you really want to learn you will have to search.. if you just want a CAB of the latest windows live messenger get the build number by installing the ROM and looking in the application for it.. then use the google search of xda-developers (e.g. "Windows Live" <build number> )and you can be sure you will find someone has already done the hard work for you.
hope that helps.
You find threads on converting CAB's to OEM packages but not the other way round.
The trouble is when you extract a ROM, you'll probably find in the SYS directory, the OEM folder you want with all the relevent files. BUT you won't know where they all go. And if the files you want are in the OEMApps folder you won't know what files need to go together. What I do is look at a similar OEM package (See Alex's excellent work) and this will show the files you need, where they go plus any registry settings. You can probably copy over the newer files from your extracted ROM to the OEM package, overwriting the older files.
If the OEM package doesn't exist it will be a long, long job!! You need to search through the files on a device with the installed ROM and make a note of the location of the application files - this is required for the install.txt file. The next problem (& the major one) is to find any relevant registry settings - again you can search through the registry of the installed ROM. Now all this take a lot of time and effort...
odyseus said:
The next problem (& the major one) is to find any relevant registry settings - again you can search through the registry of the installed ROM. Now all this take a lot of time and effort...
Click to expand...
Click to collapse
You can cheat a little bit here though, some apps will recreate any missing entries with sensible defaults if you leave them out.. others wont.. for those you can find ANY version of the CAB that you want to use (even an older one say) and use its registry as a guide to where to find the ones for the new version.. the registry locations dont change that much between versions usually.
you'll still get issues.. but in most cases this helps if not works
Thanks for your info sambartle and odyseus. I had feared as much based on what I had found through search already, but thought there might have been a way... I guess _Alex_ and others do quite alot of legwork to extract and make all these things themselves.
I can't quite understand it however.... If I take a windows PC for example (which is similar in it's registry) I couldn't necessarily find all the associated files and registry keys associated with an application. If you are lucky they are all under one folder and one key of the registry... but something like MS Office installs so many shared files, and classes objects into the registry it would be nigh impossible to recreate that (even given the time).
Unfortunately, if the last posts I read are accurate the developers here won't be providing new OEM dumps for a while. Maybe once 6.1 is more widely released microsoft will allow download of the new mobile desktop.
Ah well, thanks for your help.... and to the other posters...it's worthless posts like yours that contribute nothing to the forum that makes extracting useful information through the forum more difficult than it should be.
bengalih said:
Thanks for your info sambartle and odyseus. I had feared as much based on what I had found through search already, but thought there might have been a way... I guess _Alex_ and others do quite alot of legwork to extract and make all these things themselves.
I can't quite understand it however.... If I take a windows PC for example (which is similar in it's registry) I couldn't necessarily find all the associated files and registry keys associated with an application. If you are lucky they are all under one folder and one key of the registry... but something like MS Office installs so many shared files, and classes objects into the registry it would be nigh impossible to recreate that (even given the time).
Click to expand...
Click to collapse
It requires alot of testing and re-installing or re-flashing, sometimes on the same ROM, sometimes on different ones, just to iron out the bugs. It's one of the reasons why I released AT&T and HTC versions in the past, just so that I can have two platforms to test on.
Windows CE is alot simpler than Windows XP by at least 10 fold. Yet there are people who have created portable versions of Microsoft Office through the use of deployment applications like thinstall, so anything *IS* possible, with automation.
Automation that works at the functionality of thinstall for CE doesn't exist because of economies of scale (e.g., it's not worth any developer's time to create a deployment package as robust as Thinstall for the PPC).
bengalih said:
Unfortunately, if the last posts I read are accurate the developers here won't be providing new OEM dumps for a while. Maybe once 6.1 is more widely released microsoft will allow download of the new mobile desktop.
Click to expand...
Click to collapse
Dumping and stripping is relatively easy once you've gotten the hang of it. You just need to keep at it.
Personally, I just don't find it to be challenging any more, since I've done quite a few AT&T/HTC WM6.0s and HTC WM6.1s and I'm now waiting for an official shipped version (no more leaked betas!!!).
bengalih said:
Ah well, thanks for your help.... and to the other posters...it's worthless posts like yours that contribute nothing to the forum that makes extracting useful information through the forum more difficult than it should be.
Click to expand...
Click to collapse
Your initial question / thread starter didn't have many details, so I would have flamed you too, although I would have also provided a link to my OEM Package Tutorial (Creating Packages from ROM files section)
It never hurts to be overly verbose when asking a question. This would make the flamers leave you alone (because they'll just get tired of reading) and should *NOBODY* respond within a couple of days, when you bump it (with flowery encouraging yet challenging words, like 'You guys are so great, but nobody could answer my question?'), nobody will mind that you did, and you will get answers after that bump...
FWIW, I still think this should have been a question asked in the OEM Tutorial thread, which I have subscribed and respond to much more frequently than new threads which I'm not aware of until I actually have the time to READ new threads. It's also because, should anyone have similar questions, it'd be much easier to fiind in the bigger OEM Tutorial thread than in this one...
Hope this helps!
Thanks Alex... as you said you would have provided me the link to your Creating Packages from ROM section which I did gloss over briefly previously but didn't totally see how it helped me (since I was looking for Cabs). But, now that you point me there I again I took another look and got some useful information.
So this is where i am at:
Ok,
So first I extract the ROM using your kitched script, then in the SYS folder I find two folders that seem to be what i want:
RemoteDesktopMobile
RemoteDesktopMobile_Lang_0409
Inside the first folder are subfolders with names like:
MvkLib.dll
and
wpctsc.exe
and inside those are an actual DLL or EXE file, and some other files called imageinfo.bin, imageinfo.txt, and some files S001, S002, s003, etc...
I am going under the assumption that all I need is the .DLL file, and the rest are some sort of uncompiled form of the DLL? (Please let me know if i need to pay attention to those other files.)
So I take all those DLL and EXE files. I also look for and find an INITFLASHFILES.DAT and don't see any references to these files, so i assume they all go in \WINDOWS?
There is also an RGU file inside here that has a few registry keys for this application.
Inside the second folder is just a DSM, and a couple of .txt and .htm files. Since these files aren't in INITFLASHFILES.DAT either, I assume they just go in \WINDOWS?
I also find a provxml file in \OEM\OEM_Lang_0409 called mxipupdate_RemoteDesktopMobile.provxml.
The contents are:
Code:
<wap-provisioningdoc>
<characteristic type="FileOperation">
<characteristic type="%CE11%" translation="install">
<characteristic type="MakeDir" />
<characteristic type="Remote Desktop Mobile.lnk" translation="install">
<characteristic type="Copy">
<parm name="Source" value="%CE2%\wpctsc.lnk" translation="install" />
</characteristic>
</characteristic>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Based on my reading of the links off your page and some further research this file seems to say the following:
Make a directory (if it doesn't exist) called \Windows\Programs (%CE11%)
Make a shortcut in the directory called Remote Desktop Mobile.lnk (the decimal ASCII text) that maps to \Windows\wpctsc.lnk (%CE2%)
So... now I have:
A handful of files...I need to put them in \Windows
I have an RGU file with a couple registry entries I need to import into the registry
I need to make
a shortcut to the exe int the \Programs directory
How then do I now package all this up into a CAB that will automatically perform the above operations?
I know about "makecab" to actually package all these up into a cab. But how to i write the command file that tells it how to do all the provisioning and registry entries?
Please let me know I am on the right track.
Thanks!
Ok...I found a program called WinCE Cab manager that made the process pretty easy. I installed it on my device and it seems to work well.
I have uploaded it here:
http://rapidshare.com/files/104977265/Windows_Mobile_Desktop_6.1.cab.html
Where is the appropriate place to post this to share with others?
yeah like people have said dumping the rom is the way to do it but most roms nowaday dont have the files for you to recook(so no oems)
so the best thing is to do is get the cab yourself and convert it to an oem with ervius's package creator
sorry kidnamedAlbert...I'm not sure where you were getting at there... the whole point of my post was how to get those cabs made from the ROM in the first place. As you can see from the previous posts it seems I have already resolved (or started my way to) getting this done.
Personally, i prefer to have the cab file as I am more interested on just being able to install it on my device then cook it into a ROM. If someone wants to cook it into a ROM that seems to be a well documented procedure if the cab file is already available.
In my case, there was no cab file available for the latest version of Windows Mobile Desktop...so i made my own from the ROM.
Maarten_0031 said:
one word: RTFW.
Read The FFing Wiki!!
Click to expand...
Click to collapse
One word: RELAX and STOP SWEARING, geez.
Hey all.
I have been searching the web for a windows moble app that will ping / check sites on a regular basis and tell me if my site is up or down.
I am in the process of developing one in .net, but would love to know if there is anything out there!!!
Cheers
MortScript has an option to check internet connection (InternetConnected) and it uses some url for that, so it may help you. I'm not sure how exactly this command works, but you can try it and see if it works for you.
If this function works for you, with MortScript you can create script that will do what you need.
What I am interested in doing is taking multiple cab files and then merging them into a single cab file so rather than having to install multiple theme tabs i could just install a single file which would make the whole process simpler after a hard reset to get all my things reinstalled.
I'm a bit of a noob and have searched through the forum but havent really found a noob's walkthrough although i have found usefull posts they arent exactly what i'm looking for, i'm sure other members would find this really usefull too if its at all possible.
It could also be helpful for installing multiple applications at a time.
I appreciate that people dont have the time to sit and talk me through the whole process but any information you could give would really be appreciated.
I've attached the files that i would be interested in merging. I'm not looking for anyone to do the work for me i'm just interested in any knowledge of the process that you may have to offer.
Thx
Alex
Doobee24 said:
What I am interested in doing is taking multiple cab files and then merging them into a single cab file so rather than having to install multiple theme tabs i could just install a single file which would make the whole process simpler after a hard reset to get all my things reinstalled.
I'm a bit of a noob and have searched through the forum but havent really found a noob's walkthrough although i have found usefull posts they arent exactly what i'm looking for, i'm sure other members would find this really usefull too if its at all possible.
It could also be helpful for installing multiple applications at a time.
I appreciate that people dont have the time to sit and talk me through the whole process but any information you could give would really be appreciated.
I've attached the files that i would be interested in merging. I'm not looking for anyone to do the work for me i'm just interested in any knowledge of the process that you may have to offer.
Thx
Alex
Click to expand...
Click to collapse
Simplest and easiest thing to do is to use UC to install all these cabs automated style when the ROM boots up. I am assuming you are using a ROM which is UC compliant (all the official ones arent.....the cooked ROMs are mostly UC compliant though).
The 'hard' way is analyzing the cab's -> extracting files/reg-entries -> rebuilding the cab-files to one cab.
Theoritically it's possible with a program like WinCE Cabmanager but it is a hell of job I think.
I would go for the UC-option mentioned by MrVanx. I use it myself and it works like a threat (you have to get familiar with wap-provisioning and stuff but it's worth the journey)
Ive tried using a few of the cooked roms over the past couple of weeks but to be honest they dont work all that well for me, none of them seem to work with msn (which is something i use all the time) i always get error messages saying that it cant find a data connection even through wifi which is always setup properly as i can search the net quite easily and have verified that the wifi is working and searched through the rom threads for fix's and all ive seen so far is that this seems to be a bit of a problem for a number of users, some fixes work for certain members but it doesnt for others, unfortunatly i'm one of the others.
Currently using Vodafone UK 1.90.161.5 stock rom.
I think the WinCE Cabmanager approach mite be the best option for me as i'm still a bit of a noob with regards to things and as most of the cabs i'm interested in merging are simple theme cabs so it shouldnt be that much of a task (gulps)
Are there any good tutorials that i could use for WinCE Cabmanager?
I'll have a search myself to see what i can come up with but in the past i've found it quite hard to find things in the forum and most of the time i stumble across certain "gems" by following links in peoples signatures.
Thanks for the info its much appreciated.
Alex
Over on the Kaiser section there was a user named bengalih, who made an automated installer called Sashimi. Although Bengalih has been banned, his work is still floating around. Check out this thread, or do a search for Sashimi. In theory, it should work for the Raphael, since it is still a Win Mobile device. Hope that helps. I might add, that right before Bengalih was banned, he stripped his Sashimi guides from his posts on xda, but they are available here.
This does look like the type of thing i am looking for unfortunately all his posts are just "..........................." but i regged on the other site and got the software so i'm going to go check it out and see how it works. Thanks for that
Alex
Just a quick question but does your mobile connection (Vodafone UK) allow you to use msn (or to that matter any IM program) or is it just http stuff only?
Tmobile wnw doesnt allow IM software over the data connection unless you use wnw+ so i wonder if this is the case with vodfone aswell?
Yeah it does, it also allows me to use skype too. Unfortunalty its the only ROM that does allow me to use msn although i havent tested skype as this is my secondary IM app.
In theory to make a theme (cab) i tried to extract files from a few cabs, files including:
1AA884~1.004
1BBFDC~1.001
1E29E8~1.005
4E6705~1.002
5A7AE8~1.015
5B86C9~1.016
5C27FF~1.017
etc
Then i used "QuickCab 1.0" to add all the extracted files from a couple of cab files, i directed QuickCab 1.0 to install the files to the Windows directory and the process made the new cab file with no problems however i tried to install the cab file that it had created but my TF3D didnt change at all even after a restart.
I'm trying to merge NoTopCurtain.cab-NoCurtains.cab-GlassClock_v1.cab-Pamas Transparant Slider.CAB & NeonIcon.cab
By looking at the xml file it looked like all the 90 files should be installed to the Windows directory.
Any idea of what i am doing wrong?
Thx
Alex
try cabmanager. You will see the actual files. And there is very logical registry structure.
I do not have a tutorial for the program but it's not that hard. You can export files (right mouse click) and reg-entries (under 'file'). Put those all together (import of reg-entries is also possible!) Adding files gives you a simple window with where to put the files on your ppc.
It is not that hard and you will be in control of the proces instead of working with the encrypted files you are doing now...
made dozens of (working) cab's this way myself and I'm no einstein!
Good luck
@merten3000 thanks for that for the next 30 days i can make working cabs, i initially seen your post and checked the program but noticed it was only a 30 day trial so i never bothered then with your last post when u mentioned "encrypted" files that sort of made sense when i originally seen the file names of the files i was extracting where as they are now extracting properly and i created a working cab, thanks very much.
Dont suppose you know of a free program that will do the same job? Money is tight and cant justify buying this app.
Alex
The simplest thing to do, for me, would be to take the stock rom that you like, extract and recook it making only the changes needed to make it UC compliant.
That way you get your rom just as it was, and can run all your cabs. Shouldn't be much work either. (well, it wouldnt be on the Kaiser - not used Raphael kitchens etc, but assume it is relatively easy)
Hello all,
I'm trying to learn how to create cab files. I have the WinCe cab program.
Can someone help me with how to create a cab file for an URL?
(There is a cab file which installs an icon for Bank of America, and clicking the icon opens www.bofa.mobi in IE. I would like to create a few more for other banks.)
Any assistance would be greatly appreciated.
Thank you in advance.
If you could attach the .cab so as i can dissect it then should be easy enough to work out how to create another but have never created a .cab to direct link, but willing to try and help.
You can use Opera mini 5 instead, have your URL programmed on one of those tabs.
stylez said:
If you could attach the .cab so as i can dissect it then should be easy enough to work out how to create another but have never created a .cab to direct link, but willing to try and help.
Click to expand...
Click to collapse
Here's the file stylez ...thanks for your assistance ...I left you a PM...
govindar77 said:
Here's the file stylez ...thanks for your assistance ...I left you a PM...
Click to expand...
Click to collapse
Replied to PM
Seems the MiniPIE is hardcoded with the website address imagine for security reasons, not sure if able to make a link like PIE \ WWW. \ ?resource.dll for the icon, will have a good scrat around
Even easier save the page in .html create .lnk now will just be creating a icon .dll which will depend on site or if using 6.5 can use the numerous software to change the .png?
Thanks for the assistance, stylez.
stylez said:
Even easier save the page in .html create .lnk now will just be creating a icon .dll which will depend on site or if using 6.5 can use the numerous software to change the .png?
Click to expand...
Click to collapse
I have no idea what the above means ... I'm not a programmer by any means .... could you explain a bit more .... and maybe in layman terms ...???
Thanks again.
govindar77 said:
Thanks for the assistance, stylez.
I have no idea what the above means ... I'm not a programmer by any means .... could you explain a bit more .... and maybe in layman terms ...???
Thanks again.
Click to expand...
Click to collapse
I confuse meself sometimes
Well if you open up Firefox and go to a page you can go File/Save Page As save as .html then if you put this on your phone when clicked will open up default browser and the page you saved, so rather than placing in start menu you can create a shortcut too it.
Normally with a program you can create a .dll so example google.dll and what i'd do is import a image into it and tell the shortcut to see it instead of just looking like a .html "but @ the mo i'm having no joy"
Now on 6.5 there are numerous programs to change the .lnk image so you may be able to use something like JWMD Icon Changer to do this.
Hope that makes sense
govindar77 said:
Hello all,
I'm trying to learn how to create cab files. I have the WinCe cab program.
Can someone help me with how to create a cab file for an URL?
(There is a cab file which installs an icon for Bank of America, and clicking the icon opens www.bofa.mobi in IE. I would like to create a few more for other banks.)
Any assistance would be greatly appreciated.
Thank you in advance.
Click to expand...
Click to collapse
Why bothei yourelf to create a cab to do that? It Is so simple to create a shortcut for an url, check here:
http://forum.xda-developers.com/showthread.php?t=581341
wg5566 said:
Why bothei yourelf to create a cab to do that? It Is so simple to create a shortcut for an url, check here:
http://forum.xda-developers.com/showthread.php?t=581341
Click to expand...
Click to collapse
Wow good find didn't even know that it could just be a .lnk http
wg5566 said:
Why bothei yourelf to create a cab to do that? It Is so simple to create a shortcut for an url, check here:
http://forum.xda-developers.com/showthread.php?t=581341
Click to expand...
Click to collapse
Excellent catch. Thank you very much for finding it and posting it here.
Now here's one problem though. The icon that shows up is a weird windows icon. Is there a way to get the site icon in there??
I guess that's the advantage with having a cab ... It puts in the site icon.
Thanks everyone, for your help.
Please search for 'shortcut icon' on this forum,also has very simple solution.
Looks like you are a huge fan of cab installers, but to make every shortcuts a cab really takes time.
stylez said:
Wow good find didn't even know that it could just be a .lnk http
Click to expand...
Click to collapse
Me too once tried to use complicated ways for this before finally trying the shsimplest method.
Similarly, we can make a shortcut for any files on the phone, only if there is an associated app to it.
Thank you all
Wow ...you guys are awesome.
I was finally able to figure all that out ....
Tools used .. SK Shortcut Manager | GConvert | Icons
Using these I was able to create the icon dll files.... and voila ...it all works ...it all just works ...
Thanks to one and all who helped ....
Like I said ... you guys are awesome ...
govindar77 said:
Wow ...you guys are awesome.
I was finally able to figure all that out ....
Tools used .. SK Shortcut Manager | GConvert | Icons
Using these I was able to create the icon dll files.... and voila ...it all works ...it all just works ...
Thanks to one and all who helped ....
Like I said ... you guys are awesome ...
Click to expand...
Click to collapse
Sorry to revive a kind of dead thread but i am attempting to do the same thing.
I have created a .lnk named it BofA.lnk and its target is set to
"\Windows\iexplore.exe" http://www.bankofamerica.com/mobile/
So i now have that in my start menu but the shortcut has the icon of pIE, how do i change the icon to a bank of america one?
idea
Just a link here;
55#ctlpnl.exe cplmain.cpl,11?\Windows\cplmain.cpl,-5150
Everything after the ? is used to identify the target icon offset in ANOTHER dll/exe/cpl.
Here I made a thread about how to do this. You'll also find some nice Shortcut tricks and (shortcut)applications;
http://forum.xda-developers.com/showthread.php?t=623195
Good luck,
Senax
Just discovered this handy little tool for writing sys txt for Igo 8 or Primo.
Thanks to kimyaci and robynk
https://rapidshare.com/files/4073795642/SysConfigurator_1.2.rar
Posted it on a couple of older threads but they appear to be obsolete. This handy little tool allows you to fully customise and generate a sys.txt file for both Igo and Primo. It has an easy to use interface in English, Spanish and French. Pretty self explanatory. No more trawling forums for half remembered commands .
Basically it is a windows program that categorises many of the Igo and primo sys text commands. It provides clear explanations of what they do. You just tick the boxes for those that you want to use and the program can then generate a new sys.text file or update an existing one. Very useful for both customising and troubleshooting in IGo as it saves you having to look up the commands or even doing any typing.
The original comes from a spanish forum and I presume any updates will be published there.
Requires registration.... Upload it to a public share...
Sorry I'm not sure what that means? This is just a link to a piece of software that I thought was useful.
corrsea said:
Sorry I'm not sure what that means? This is just a link to a piece of software that I thought was useful.
Click to expand...
Click to collapse
When I click the link it says, you must register. I and also others don't like to register and would appreciate if you could move the file to another place for downloading.
ok I get it now. Didn't realise that was what happened. I thought it just went straight to the download. Will upload it to rapidshare. Removing the link for now.
EDIT
All done. Rapidshare link now in place. Sorry about that.
Downloaded ok. fantastic thanks
425 downloads in total. Guess some people have found it useful
hi thank you for the tool can anyone upload it again the link is dead.
thanks in advance.
corrsea said:
Just discovered this handy little tool for writing sys txt for Igo 8 or Primo.
Thanks to kimyaci and robynk
https://rapidshare.com/files/4073795642/SysConfigurator_1.2.rar
Posted it on a couple of older threads but they appear to be obsolete. This handy little tool allows you to fully customise and generate a sys.txt file for both Igo and Primo. It has an easy to use interface in English, Spanish and French. Pretty self explanatory. No more trawling forums for half remembered commands .
Basically it is a windows program that categorises many of the Igo and primo sys text commands. It provides clear explanations of what they do. You just tick the boxes for those that you want to use and the program can then generate a new sys.text file or update an existing one. Very useful for both customising and troubleshooting in IGo as it saves you having to look up the commands or even doing any typing.
The original comes from a spanish forum and I presume any updates will be published there.
Click to expand...
Click to collapse
Hi, just checked the link. It should still be working. Try it again, if you have no luck let me know and I will upload it again.
Sent from my GT-I9300 using Tapatalk 2
Cant download. The link is dead.
Error:
**********
Folgender Download ist nicht verfügbar:
https://rapidshare.com/files/4073795642/SysConfigurator_1.2.rar | 0.27 MB
Download-Parameter ungültig - bitte nocheinmal probieren.
**********
aleskow said:
Cant download. The link is dead.
Error:
**********
Folgender Download ist nicht verfügbar:
https://rapidshare.com/files/4073795642/SysConfigurator_1.2.rar | 0.27 MB
Download-Parameter ungültig - bitte nocheinmal probieren.
**********
Click to expand...
Click to collapse
Hi the link is definitely still working. have just downloaded it myself
Anyway have added a direct download to xda from first post for those for whom the rapidshare link does not work.
Enjoy.
iGo sys.txt configurator: Excellent
@corrsea
Many thank mate. Great small software.
Unbelievable that link is still working.
Although I am using iGO since the first release on old PDA, I always use to alter the sys.txt file manually.
I did know that such configurator exists and I have never searched for it.
Respect.:good:
long live open source
just downloaded it.
Great find for me.
Thanks
Gone thu all the menu options setting in particular the warning setting The over speed warning works as well visual and voice announcement department. Set speed camera and red light for visual and voice announcement. Only the visuals come up but no accompanying voice message Downloaded sysconfigure looked @ the sys file to see difference to the gps original sys file and observed no difference in the warning list. Not knowing sys script requirements don't understand how to force voice messages via the script An example of a howto would be appreciated
did manual editing of the sys file restarted the gps then closed down primo re-writes the sys file so changes are lost! Suspect the problem is in the primo software