Activesync isue - HTC Tornado

I'm trying to flash WM6.1.After formating BINFS i cant connect activesync with the phone!I have this issue long time ago from the precedent ROM "nitrogens v5 greek"
I use Vista on my pc.
Is there any way that i can flash the new rom without enabling the activesync or i'm i going to sent my phone to the trashcan?
P.S I've posted the same thing in "WM6.1 Clean 5.2.19202 (Build 19202.1.0.0) Eval" but i thing it's better here.
Thanks in advance!

You should check out Karhoe's WM6 installation guide it posted on the tornado start page. I think he said that you have to use some thing else instead of Activesync when using windows vista.

I pluged the phone on xp system anf it didnt connect, just like my vista.When i searched the phone i found that the USB Switch was set on RNDIS(I dont know what does this means?).When i changed it the activesync start synchronizing.I'l try it on my vista system at this evening to see if it's working.
Sorry about my n00b question but i never searched it..
Anyway everybody is so helpful in this forum!

Related

WM6 ROM Upgrades under VISTA

I found two days ago that doing a WM6 ROM upgrade on my Jasjar via a PC running VISTA Ultimate, the device got stuck in BootLoader Mode.
I have Bootloader v2.01 on my device.
The only way to recover was to attach the Jasjar to a PC running XP and then start from scratch.
I tried it again today and got the same result!
I recommend NOT to upgrade ROM on a PC running VISTA.
I hope this helps someone, somewhere.
Thankyou to all the gods that walk amongst us monkeys.
Drongo said:
I found two days ago that doing a WM6 ROM upgrade on my Jasjar via a PC running VISTA Ultimate, the device got stuck in BootLoader Mode.
I have Bootloader v2.01 on my device.
The only way to recover was to attach the Jasjar to a PC running XP and then start from scratch.
I tried it again today and got the same result!
I recommend NOT to upgrade ROM on a PC running VISTA.
I hope this helps someone, somewhere.
Thankyou to all the gods that walk amongst us monkeys.
Click to expand...
Click to collapse
There is a thread about upgrading with Vista in the General part of the Universal forum... there are drivers supplied there to upgrade with Vista, some are successful.
where is this thread?
http://forum.xda-developers.com/showthread.php?t=291723
Seek and ye shall find
ooooo thanks
hi. i have the same problem. i try to upgrade from vista my spv m5000 and now the pc don't recognise the device, and i can't woork with the ppc. it simply don't start.
can you give me any solution?
thanks
paulo
never upgrade your ROM in Vista 32 0r 64bit doesn't work at all or may kill your device.
Windows Xp is the way to update ROM
I upgrade fine using vista but you must use the guide to do it right
OMG it is finally updating. Using XP.
Got stuck in bootloader after trying to flash from Vista. Thought I "bricked" (as you guys almost universally put it) the thing. Fixes didn't work (I already had the USB Modem driver installed, mtty didn't see any USB connection, and so on...)
Connecting to an XP laptop and works perfectly.
In Vista, in the boot loader mode you have to use the old XP drivers dated 2004. When you put your Universal in the boot loader and connect to your PC under Vista, than under device manager the USB driver must be 2004. If not then you have to install the old 2004 driver.
KOR!

Tera Term Pro issue

Guys
Im trying to update my C600 to the wm6 rom,
Ive unlocked (SuperCID) my phone, app unlocked as well. However when I try run TTP it comes up saying cannot connect followed by several other characters.
Im using a XP laptop nd have followed the instructions on the thread.
One other thing is that whenever I try run a ROM update official or unofficial Windows says that romupdateutility.exe is not responding...... and closes.
Ive tried doing a hardreset but still no joy
Please help!!!
thanks
Simon
after opening TTP are you selecting Serial and then USB from the drop down list??
ok.. make sure u r in bootloader mode and not in phone mode.
hold the camra key when the phone is off then plug in the usb cable
thanks guys
but yep definitley in bootloader mode and definitaly selecting usb coonection!
any other ideas?
I wonder if my phones got somethng wrong as i cant even install the official Orange Rom? even my phone works perfectly
Thanks
Si
oh.... r u using vista????
try updating the drivers!!! read the vista thred in the first post... that might help you
Well ive tried Vista nd Xp, I too have just read the Vista thread and downloaded the drivers
tried flashing again, PC rebooted at 20% One bricked C600
luckily its a corporate phone so will retry when I get my new one - lol

[GUIDE] Step-by-step pictorial guide to upgrade to Windows Mobile 6

Please refer to my blog for the most updated instructions.
http://karhoe.net/guide-upgrading-htc-tornado-to-windows-mobile-6
LOB FOR YOUR JOB......!!!!!
very good
karhoe said:
Ok, I have seen many people still don't understand how to flash to WM6, so here is step by step guide with pictures
Click to expand...
Click to collapse
Karhoe,
Let me congratulate you on this fine guide. However, you might want to put in some edits (since this guide is focussed more towards noobs):
The process is entirely possible in Windows Vista as well. I upgraded my phone multiple times to different builds on a Vista system without any problems. You need to follow this guide
Step 1) Please add QTEK 8300 and Imate SP5m to the list of Torando devices.
Step 2) Please add WMDC for Windows Vista users so that some noob user doesnt try to install AS 4.5 on Windows Vista.
I agree though that SPV-services wont run on Windows Vista. Overall, a fantastic guide ! Great job !
anandoc said:
Karhoe,
Let me congratulate you on this fine guide. However, you might want to put in some edits (since this guide is focussed more towards noobs):
The process is entirely possible in Windows Vista as well. I upgraded my phone multiple times to different builds on a Vista system without any problems. You need to follow this guide
Step 1) Please add QTEK 8300 and Imate SP5m to the list of Torando devices.
Step 2) Please add WMDC for Windows Vista users so that some noob user doesnt try to install AS 4.5 on Windows Vista.
I agree though that SPV-services wont run on Windows Vista. Overall, a fantastic guide ! Great job !
Click to expand...
Click to collapse
Done, hope moderator can pin this up, hopefully no more new threads saying
"help, i only get white colour screen "
Hello
Great Guide, I am a newbie i have just been given 3 of these phones 2 o2 xda iq's and a vodafone v1240, I am having problems i have downloaded the teratermpro got the o2 xda iq in bootload mode and run the program and select usb and then i comes up can't open?? any ideas. I am running vista not xp if that helps.
Cheers
Brogusblue
It runs perfectly on XP, you will have difficulty using Vista, first of all, Super CID can only be performed on an XP system
Seems I have problems on step 9. I see bootloader skin and activate usb connection but it doesn't sync! the phone is not visible. help
no problem. i turned the phone off and turn it onholding the camera button. now the process in step 10 starts!
Hi,
I get that Tera Term error msg as well. "Cannot open @£$€" (USB). Running Vista. My phone is already SuperCID.
When connecting the USB (and entering bootloader-mode), Vista tries to install drivers for the device but cannot find them, maybe that's the problem?
Any clues?
/E
Maybe it doesn't work that well in Vista as I have said.
Try to do it on an XP system
I've passed 8 steps without a single error, enabled ActiveSync USB connection, but ActiveSync doesn't recognize my device whatever I do, unlike Katik wrote 2 posts above!!!
Now I just see the boot screen, with "USB" letters on the bottom if I plug in the USB cable.
Several times I tried to disable ActiveSync USB and run ttermpro.exe -- "info 2" works OK, but no luck after I enable it again.
Please tell me how can I establish ActiveSync connection??
The reverse process of disabling the USB connection
What process? I just check/uncheck "allow USB connection" in ActiveSync, do I have to do something else after I made "format BINFS", typed "ResetDevice" and enabled USB in ActiveSync??
I tried to connect/disconnect the cable, turn the defice on/off (pressing the Camera key or not), nothing helps so far...
Had no luck under XP after some tussle and reinstallation of ActiveSync, but finally succeeded under Vista...
(http://www.modaco.com/RUU-Vista-done-u-t252977.html).
Kinda exciting experience I must say.
The ROM is cool!
Congratz, welcome to the club
I can not for the life of me get this working!
Tried unlocking the C600 I bought off eBay both via the official Orange Developers thing (My IMEI is not recognised) and using the SDA Unlocker tool.
This says that my phone is not unlockable.
Anyone got any ideas?
Help! Please?!
Thanks for the Guide
While not a computer noob, I am hardly an expert with the ins and outs of my SDA.
Your guide was exactly what was needed to make the move to WM6. I ran into the same problems listed here - stuck in bootloader after the ResetDevice, but managed to get past it.
Thanks for taking the time.
I wanted to thank you for the guide. I've been waiting for a WM6 update since it was announced. I finally did it yesterday, and got it running on my SDA.
Step 13 - If you are using Dopod 577w, Qtek 8310, Orange SPV C600, I-mate SP5, you need to install this file to enable Contacts and Messaging button. If you are using Dopod 586w or Imate SP5M, you need to install this file
i want to download for i mate sp5m but i will not download can anyone is help me?
I think I know why, try this, right click and save target as, instead of clicking on it

JasJar dead

Yesterday after trying to update upto 6.1 my phone loading only in BL mode
Vista x64. ROMUpgradeUt start normaly, was indicated current version & new, but after a few second it wrout that connection error.
Afrer that phon loading only in BL mode.
Today try to upgrade udnep XP: at first time PC indicated that found unknown device but Upgrader see same problem with connection.
Now XP don't see phone totally
PLZ, HELP ME!!!
I have too crashed my Uni. Windows Vista can't running ROMUpgradeUt. U have to do it on XP or W2k.
Or have a look Here :
http://forum.xda-developers.com/showthread.php?t=292631
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
Or check the WiKi ...
shoud be working to Upgrade with Vista...
GGloryS said:
Yesterday after trying to update upto 6.1 my phone loading only in BL mode
Vista x64. ROMUpgradeUt start normaly, was indicated current version & new, but after a few second it wrout that connection error.
Afrer that phon loading only in BL mode.
Today try to upgrade udnep XP: at first time PC indicated that found unknown device but Upgrader see same problem with connection.
Now XP don't see phone totally
PLZ, HELP ME!!!
Click to expand...
Click to collapse
You can upgrade from bl mode with a sd card using that method to do it. Search in forum and you'll find it. Good luck!
Windows XP is much better to upgrade with (as well as being a much better OS full stop )
There is plenty of info in the wiki about upgrading from Vista however,
Though if all else fails you could always borrow someone's XP machine to revive your phone.
Good luck!

HELP Can't upgrade

I just tried to upgrade my XDA EXEC and it was not succesful. After this attempt my exec is dead, I can't turn it on it is still showing boot loader "Serial" on the screen without backlight (when connected to PC is showing USB instead of SERIAL). When I try to upgrade it is always unsuccesful.
I'm working under Vista, maybe this is the issue.
Used different roms and all with the same effect.
Tried to run mtty before upgrade but it is showing "can not open usb port".
Has anyone idea how to sort it???
Welcome to forums
If you already read the Wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
And still have problems, try to reflash ROM on a windows XP machine
Good luck,
flashing with vista
Hi all,
I have Universal.
I have never been able to flash any rom's with vista.
Why??After all, Vista doesn't need Activesync.
By the way, how can the LEDs under the keyboard be blue on the pic above?
(Mine is red.)
Yes you can flash in vista and to sync you use windows mobile device center instead activesync, but for new members is always more easy to flash the 1st time on XP machine.
The blue light on the keyboard can be changed (at least not that I know)
That is something related to the Universal model you have.
Check here to see all different models:
http://pdadb.net/index.php?m=pdacomparer&id1=371&id2=312&id3=313&id4=311&id5=148&id6=149
As far as I know the only blue light is the O2 Exec

Categories

Resources