Help Needed! Touch Keypad and keyboard returns numbers in "abc" and "XT9" mode
I need any help I can get on this! Thanks in advance.
I am not sure why, but suddenly my touch keypad and keyboard returns only numbers even when I am in "abc" and "XT9" mode. For example in "abc" mode, when I pressed the key "abc", it returns "2" when it should actually show "a". Same problem in "XT9".
Problem persists even when I soft reset a few times. I am not sure if this is due to one of these programs that I recently installed - (i) pocketcm, and (ii) opera 9.5 (extracted from one of this forum).
I use the touch keypad very often and would really like to get it working again. Does anyone know how this can be fixed (hopefully not a hard reset)?
Thanks a lot in advance
I had the same problem - it was driving me bonkers! I uninstalled PocketCM Keyboard, did a few soft resets and a power-off and the problem went away
Same problem here. I'm using Bepe 0.66. Soft-reset has fixed the problem so far, but it's annoying when it happens.
Same for me too. I uninstalled pocket CM Keyboard and three soft resets but still the same problem.
look9001 said:
Same for me too. I uninstalled pocket CM Keyboard and three soft resets but still the same problem.
Click to expand...
Click to collapse
Try doing a power-off and on. That solved the problem for me. Doing a soft reset sometimes causes the phone to "lose" the installed microSD. Had to re-insert the card a couple of times for the phone to re-detect the card.
Bump
I have the same problem, sometimes it works sometimes it doesn't. No rhyme or reason. It seams to work if I switch to full keyboard and back again but that defeats the object... Any ideas?
Same for me
I've tried multiple soft resetS and power off/on, but nothing...
I've searched in registry, but I did'nt find something.
Please, help us if you can
what kinds of applications that you guys running when the XT9/abc problem exists? ( Phone application , notes or others? )
rayho said:
what kinds of applications that you guys running when the XT9/abc problem exists? ( Phone application , notes or others? )
Click to expand...
Click to collapse
All text applications. For me the problem starts with upgrading of pcm keyboard to last version, 0.14. This one works normally, but HTC keyboards always type numbers. Once unistalled, everything comes ok.
The same problem here. I have also installed PCM Keyboard 0.14. Now I know it is a 'known' problem, I can go to sleep normally again ;-)
I hope someone finds a solution...... thank you in advance!
Any one any ideas on this one? I have the standard O2 ROM and its really starting to annoy me. Its really painful to have to get the stylus out every time to send a text!
Still no solution? anyone recommend a keypad that can be installed over the standard ones? and used with one hand of course...
Thanks
I got this problem yesterday. I hadn't read this thread, but had only installed face contacts, sms-chat and pcm keyboard since it had been working OK.
I had been using SIP change to make my selected SIP work, so I changed the selected SIP from PCM keyboard to ordinary keyboard.
I then uninstalled the three programmes. Then used S-K tools to find all traces of all of them and removed them manually. Also, deleted the folder in program files for PCM keyboard.
Then I soft reset by power off method. To my relief, Touch keyboard worked again.
Re-installed Face Contacts, everything still fine, re-installed sms-chat, everything fine.
Did not re-install pcm keyboard as I think that was the problem.
During all this, TouchPal still worked OK and there is a free version, so those who are still having problems could try using that until you get the other stuff to work again.
i had the same problem after installing a t9 dictionary.
i have the same problem too. the touch-keyboard works fine in all applications except the Opera for Windows Mobile browser and typing a www-adress with the stylus does not really funny.
i am thinking about installing the Resco Keyboard Pro (http://www.resco.net/pocketpc/keyboard/) but don't wanna pay $20 for a bug in the htc's software.
I got the same problem, with Opera Mobile...there I just can use the "normal" windows keyboard, not the HTC Touch keyboards, they ae just typing numbers...if anyone has a fix for this, I would be really happy...seems to me that the opera mobile still has some bugs, for me it does not show all "labels" (text in menu) correctly, so that sometimes there just I have <-123456789-> instead of the caption...
Has anyone got a solution for this yet?
I think there were a bug with one version of Opera Mobile 9.5. Installing the most recent release may solve the problem. Here is the latest version and some discussion about it:
http://forum.xda-developers.com/showthread.php?t=401643
Thanks for the reply but I don't have opera installed and never have. Whenever I use the touch keyboard or touch keypad it just inputs numbers.
I just experienced the same problem. I installed a english t9 dictionary file and after a soft reset the problem was there. After reading this thread I removed the english dictionary and the problem went away.
Related
I've had my touch pro for a few days now after upgrading from a wm6.1 Tytn II but no matter what i try i can't get word suggestion to come up with anything when using on-screen keyboard. I've gone through all the settings i can think of. Anybody else having this trouble?
Same here. Tried in the regular settings, as well as in Advanced Config, but to no avail...
Ok here is a fix that i found. When you turn on the on screen qwerty keyboard you have to switch off t9 and switch it to abc. This has worked for me for both on screen and hardware keyboard. Hope this helps
Bxsteez said:
Ok here is a fix that i found. When you turn on the on screen qwerty keyboard you have to switch off t9 and switch it to abc. This has worked for me for both on screen and hardware keyboard. Hope this helps
Click to expand...
Click to collapse
tried that, still the same.
That's strange.... What on screen keyboard are you using?
Bxsteez said:
That's strange.... What on screen keyboard are you using?
Click to expand...
Click to collapse
'keyboard', same as the old stardard keyboard, small keys so i have the numbers at the top.
johnk1973 said:
tried that, still the same.
Click to expand...
Click to collapse
same here, still doesn't work...
Standard keyboard does have any word completion dictionaries installed for the Diamond or the touch Pro.
If you want word completion, you need to use the full QWERTY htc keyboard, not the standard WinMo keyboard.
Problem persists...
Turned off T9, switched to "ABC", ans I am using the hardware keyboard. The same problem persists. The black line still appears at the bottom of the screen, when I type something it appears both at the "correct" location plus on the bottom black line. If I make the mistake of using the keyboard arrows - crash boom bang. A lot of words appear near my cursor. And the funny part is that I always have to read my SMS before sending it: this magnificent auto completion method somehow finds a way of adding unwanted words somewhere in the message body. It is *very* annoying.
I don't always use English when I type a message, and, horror: sometimes I even don't use punctuation, because I'm in a hurry.
Did you try to go in the T9 options and untick everything, and go in settings -> Inout -> Word completion and untick everything as well?
Full QWERTY and T9 on for me works!!!
Hi guys,
I went from loving my Touch Pro to almost throwing it at a wall!
This keyboard slide-out issue is driving me nuts, whenever I want to type something using the hardware keyboard, I slide it out and the damn landscape TF3D menu gets displayed ON TOP of whatever page I'm on.
I've tried the disable landscape registry trick (HKCU\SOFTWARE\HTC\Manila\landscape=false then soft reset) which works... but after a while (a few minutes or after some program or some random thing) it stops working and I have to either reset the phone or turn the reg key back to "true".
Is there any way at all to prevent the keyboard slide showing the landscape menu or at least prevent the menu from being on top of the current app?
For example I go to reply an SMS (I even tried waiting on the cursor to blink a few times, 2 - 3 secs) then slide out the keyboard to type and the stupid 8 icon menu goes on top of my message entry page, I have to choose 'messaging' app from the list of running apps to get back to that page, it really defeats the purpose of having a hardware keyboard!
Thanks guys for reading the rant.
andyle2k said:
Hi guys,
I went from loving my Touch Pro to almost throwing it at a wall!
This keyboard slide-out issue is driving me nuts, whenever I want to type something using the hardware keyboard, I slide it out and the damn landscape TF3D menu gets displayed ON TOP of whatever page I'm on.
I've tried the disable landscape registry trick (HKCU\SOFTWARE\HTC\Manila\landscape=false then soft reset) which works... but after a while (a few minutes or after some program or some random thing) it stops working and I have to either reset the phone or turn the reg key back to "true".
Is there any way at all to prevent the keyboard slide showing the landscape menu or at least prevent the menu from being on top of the current app?
For example I go to reply an SMS (I even tried waiting on the cursor to blink a few times, 2 - 3 secs) then slide out the keyboard to type and the stupid 8 icon menu goes on top of my message entry page, I have to choose 'messaging' app from the list of running apps to get back to that page, it really defeats the purpose of having a hardware keyboard!
Thanks guys for reading the rant.
Click to expand...
Click to collapse
What ROM are you currently using?
I had that issue too, I got rid of the theme I was using and stuck to the original HTC theme and I no longer have that problem!
I'm using Da_G's Clean ROM with his standard Manila install afterwards.
I've recently uninstalled the EzInput/T9 package from HTC and it seems to be behaving itself for now (it's been 2 hours with minimal use), like I said before it happens randomly. I don't know if it was because of the EzInput or something else because this seems to go away after every soft reset then comes back unexpectedly.
Thanks.
andyle2k said:
I'm using Da_G's Clean ROM with his standard Manila install afterwards.
I've recently uninstalled the EzInput/T9 package from HTC and it seems to be behaving itself for now (it's been 2 hours with minimal use), like I said before it happens randomly. I don't know if it was because of the EzInput or something else because this seems to go away after every soft reset then comes back unexpectedly.
Thanks.
Click to expand...
Click to collapse
I had the issue using the RRE ROMs and ended up removing HTC Volume Control and it solved the problem completely.
Hrm I see to be having the issue again. How do I remove the HTC Volume Control?
I don't have any of this because I dumped the TF3D. Much happier and trouble/issue free without it. Euro device using stock rom.
OK I can confirm that it is the HTC Volume Controls that is causing this!
So from my previous post I tried to uninstall HTC EZinput which seemed to have fixed it but like I originally said the problem seems to happen out of nowhere after some time using the device.
So after reading the post above about HTC Volume Control, I pressed the vol down button, then this problem started happening again. I did a soft reset and no more problem after a while I pressed the vol button again and it happened again!
andyle2k said:
OK I can confirm that it is the HTC Volume Controls that is causing this!
So from my previous post I tried to uninstall HTC EZinput which seemed to have fixed it but like I originally said the problem seems to happen out of nowhere after some time using the device.
So after reading the post above about HTC Volume Control, I pressed the vol down button, then this problem started happening again. I did a soft reset and no more problem after a while I pressed the vol button again and it happened again!
Click to expand...
Click to collapse
Check out the ROM in this thread:http://forum.xda-developers.com/showthread.php?t=467592
This is the ROM I use and the cook has already removed HTC VOLUME CONTROL from the ROM.
Fix
instal the 6.5 volume control from JMZ - problem solved.
link
sorry, here is the link:
http://www.everythingdiamond.info/
colbyjames said:
sorry, here is the link:
http://www.everythingdiamond.info/
Click to expand...
Click to collapse
but he link that you gave us is for HTC Diamond... not for HTC Raphael...
will the application works on HTC Raphael??
Problem solved!
I had this problem for ages (as long as I have my Raphael, I think), and I couldn't track it down on the internet. Some time ago I found a post on XDA describing the problem but I can't find it again. Finding this post made me think.
I installed the aforementioned "volume control from JMZ" (I had extremely hard time finding it) and I didn't like it because it did something strange with my system font but it solved the problem. After few unsuccessful tries to fix the font (btw does anyone know how to fix this?) I decided to uninstall it. And the problem didn't return.
So what was the problem? Well… when I bought the phone I wanted (as many of you did) to change those ugly taskbar icons including volume icons contained within HTCVolumeControl.dll. And I did it by finding the dll file with the prettiest icons here on XDA (and maybe I changed some of them using the described procedure, I really can't remember now). However, that dll is the main culprit for the bug described in this post. Was it already broken when I found it, or I somehow broke it it's irrelevant now.
So the solution is: you don't have to install anything. Just delete HTCVolumeControl.dll from Windows folder, i.e. rename it using for example Resco File Explorer and then soft reset the device so that original file from ROM can be restored. Yes, the ugly icons will return but at least now you'll now where to look if this bug reappears. After that go and some find pretty volume icons, and again follow the procedure how to change them.
I have no idea how the file got corrupted in the first place (maybe there is some corrupted dll roaming the xda forum ) but after this episode I make changes only directly on the original dll (the one from ROM) and every time it was successful. I changed many icons until I found my favorites.
Cheers!
Hi,
I am just new to this pocket PC phone (just the old HTC Touch) and i tried out installing an IP Phone Keyboard program. When I wasnt happy about it, i uninstalled it but it messed up my SIP. The default standard input keyboard now is cut at the bottom (meaning i dont see the entire last row of Ctrl, space bar, etc.) but there's a black row appearing at the top of the input keyboard. It looks like the input keyboard was dragged down. Worse, the suggested words now appear at the bottom of the screen (where your normal Send or Cancel buttons are).
I really would appreciate your advise and help in getting this resolved. Dont know where to run to or whom to raise this to.
Thank you and looking forward to your response.
ailene said:
Hi,
I am just new to this pocket PC phone (just the old HTC Touch) and i tried out installing an IP Phone Keyboard program. When I wasnt happy about it, i uninstalled it but it messed up my SIP. The default standard input keyboard now is cut at the bottom (meaning i dont see the entire last row of Ctrl, space bar, etc.) but there's a black row appearing at the top of the input keyboard. It looks like the input keyboard was dragged down. Worse, the suggested words now appear at the bottom of the screen (where your normal Send or Cancel buttons are).
I really would appreciate your advise and help in getting this resolved. Dont know where to run to or whom to raise this to.
Thank you and looking forward to your response.
Click to expand...
Click to collapse
Restart your PPC. After that go to settings--> input---> select default input keyboard and try.
Hope it will help.
Are you using the default keyboard?
You can install any other SIP and it should work fine even if the default keyboard's having problems.
You can also hard reset incase you don't manage anything else.
I'm not aware of a bug concerning the default keyboard showing wrong except for something which goes away after a soft reset.
Thanks very much for your responses. Unfortunately, I did all that (set keyboard as default, try installing another keyboard software, soft reset and hard reset) but the problem still persists. I am almost in the vicinity of regretting why i had this PPC.
can you specify exactly which app caused this problem?
Hi,
When I type fast on the Samsung Epix (i907) keyboard, then often letters are missing, even though I did get the feedback from the keyboard that the keys were pressed. For example, when I try to enter "this is a test with the new keyboard" it just came out as "this is ates wit the newkeyboard".
I am typing at the same speed on other mobile devices (e.g. Blackberry) and it works fine there.
Here is what I have tried so far:
1) Turned off Word Completion and Auto Correct under "Settings/Input/Word Completion". Some posts suggested that solves the issue on some other Windows Mobile devices, but it did not do anything on the Epix.
2) Changed sensitivity on the Up/Down Control under "Settings/Buttons". Same result: no change.
3) Performed a hard reset and tried it again with only the blank OS (plus all the goodies AT+T added...). Still same result.
Does anybody have any other suggestions?
Thanks much!
Ralph
plaes ask question in the correct thread this helps us to answer you better and get your question noticed
Thanks for the quick reply. Which forum is the most appropriate for this question? I was not able to find a forum specifically for the Epix.
Thanks.
Ralp
rbuelling said:
Hi,
When I type fast on the Samsung Epix (i907) keyboard, then often letters are missing, even though I did get the feedback from the keyboard that the keys were pressed. For example, when I try to enter "this is a test with the new keyboard" it just came out as "this is ates wit the newkeyboard".
I am typing at the same speed on other mobile devices (e.g. Blackberry) and it works fine there.
Here is what I have tried so far:
1) Turned off Word Completion and Auto Correct under "Settings/Input/Word Completion". Some posts suggested that solves the issue on some other Windows Mobile devices, but it did not do anything on the Epix.
2) Changed sensitivity on the Up/Down Control under "Settings/Buttons". Same result: no change.
3) Performed a hard reset and tried it again with only the blank OS (plus all the goodies AT+T added...). Still same result.
Does anybody have any other suggestions?
Thanks much!
Ralph
Click to expand...
Click to collapse
Is it random letters or is it always the same letters that you missing? According the example text that you have given it seams you have missed twice the space key.
However I have such issue with my HTC Universal. In my case I found out it is the keyboard membrane that doesnt function as it suppose to be and it is mostly the same letters that failing.
See now I had the Mogul and this happened almost no stop. I figured it to be an issue with lag?
can u help my problem?? i have polaris 2nd hand
my polaris dont have "touch keypad" & "touch keyboard" at input panel. how to solve this problem. thx
hellloo...
Do first soft reset, if don't help do a hard reset. I have same problem after installing new Rom, after restart the keyboard was fixed.
I can't too. I installed Touch-keyboard-keypad, Registry Enable HTC Keypad, as well as Finger Keyboard 2.1. I am able to select it, but it will return to normal keyboad. Touch keyboard and keypad shows not effect no matter how many times I'd selected it. I'd tried restart and restart, install reinstall.. it never seems to work. I went to SIP change too... everything seems ok while setting.. but the Touch keyboard and keypad never comes out.
Sigh... whole morning of setting it after flashing a new 6.5 rom... it's... really tiring...
I flashed another 6.5 rom before with those mentioned above, and it works well... im not sure.. why isn't it functioning this time.
anyone can help in this?