looking for a bluetooth toggler app (NOT on/off) - General Topics

hello all.
I am looking for an app that will allow me to easily toggle between 2 or more BT devices. Here's the deal, i have 2 BT devices, one that is a headset with a2dp and another that is for my PC VOIP but also can switch to my 8525... what i want to be able to do is quickly and easily change which BT device is the primary on my cell... is there anything like this available?
thanks!

does anyone have any program that will do this?

Batterystatus using the bluetooth tray icon has a a2dp switch. Dunno if that helps you. Works for me.

i don't need a a2dp switcher... i have multiple headsets that i use regularly and just want to be able to click to activate device 1, then 6 hours later, when the device is dead, activate device 2... any thoughts?

Maybe a mortscript?
Surur

Related

Bluetooth auto-connect within range?

Is it possible to have my phone automatically pair up and start using it as the audio device when I turn bluetooth on? I have the new AT&T Tilt and bought a Motorola DC800 bluetooth receiver for my car. I'm new to this whole pda phone thing - and as of right now - I have to go into the settings of the bluetooth menu and click/hold on the DC800 and say "Set as Wireless Stereo"... since I get in and out of the car a lot - I'm looking for a way to avoid having to do these extra clicks...
Any registry tricks or programs that will auto connect for me?
Look for A2DP Toggle. It should solve your problem... not that it would automatically pair, but give you a much easier way to accomplish the above than what you are doing at the moment.

Handle call through PC

Hey guys-
I'm running My Mobiler to output the display, and control my phone (Tilt/Kaiser/TytnII/8925) via my PC (XP sp2).
When I receive a call, My Mobiler allows me to accept/reject/sms etc through my pc (really through my phone dialer but I'm using my keyboard and mouse), but when I want to accept the call, and talk to my caller, I'm having to pickup the phone, and resort to what I'll call 'untethered' phone use (i.e., phone to ear/BT headset).
What I'd like to do (and hopefully where you guys can help me out) is to use some method or software to relay the call through my PC (and use my pc's built in speakers & mic). Bonus if the method leverages something I'm already running (ActiveSync/My Mobiler).
Additional info:
BT is an option, but it's Toshiba stack, which from my researching doesn't' seem to support the Headset profile on PC.
Thanks
well if your pc has bluetooth it should be able to work....i have a usb to bluetooth adapter for my pc and i can get the audio going to it never tired to use a mic or use my pc as a speaker phone but 1 thing for sure the audio from calls go on my pc....if i had a mic i would test it out...also as another option(if your phone has it.) u could just use speaker phone...
Grondinm said:
i have a usb to bluetooth adapter for my pc and i can get the audio going to it
Click to expand...
Click to collapse
What's the make/model of the USB BT you're using?
Mine is:
Toshiba Bluetooth Stack for Windows
Version v5.10.15
When I pair up the profiles displayed on the tilt are:
A2DP: Advanced Audio Distribution Profile
SPP: Serial Port Profile
The profiles in the Toshiba BT manager are:
DUN: Dial-Up Networking Profile
LAP: LAN Access Profile
If I use my BT headphones (Sonorix C3) with MortPlayer, A2DP works, If I try to use the Toshiba USB BT it doesn't work.
I think the one I need is (either)
HSP: Headset Profile
or
HFP: Handsfree Profile
I'm suspecting the toshiba bt stack is to blame, anyone else able to use a toshiba stack and get HSP/HFP working on their PC?
Im currently using My Mobiler to use my VOX due to having removed the broken screen from its shell
whenever i take a call, all i do is put it on speakerphone and it works fine
using the computers speakers and mic would be great fun, but for me its impossible due to the bluetooth dongle i use not having any compatible (free) software that uses audio streaming, but if it did, audio streaming should work with both speakers AND a mic! so it should in theory work.
i think
cris_rowlands said:
whenever i take a call, all i do is put it on speakerphone
Click to expand...
Click to collapse
Grondinm said:
u could just use speaker phone...
Click to expand...
Click to collapse
Speakerphone isn't an option, I'm in an office and the sharing of my conversation with my coworkers via loud speaker wouldn't be appreciated.
I intend to use a headset+mic combo hooked up to my pc, this way I can listen to music off my pc, and handle calls.
flow would be:
[Phone]<--display&control(via My Mobiler)-->[KVM - PC]
[Phone]<--voice*(Need solution here)*-->[MIC & Headset - PC]
Salling Clicker Is on the road to what I'd like to do, although it doesn't have voice support under windows. It's on the road to PPC <> PC convergence.
Any one have any experience with tweaking Salling Clicker to work with voice?
thetiltedKaiser said:
What I'd like to do (and hopefully where you guys can help me out) is to use some method or software to relay the call through my PC (and use my pc's built in speakers & mic). Bonus if the method leverages something I'm already running (ActiveSync/My Mobiler).
Click to expand...
Click to collapse
When I paired my MDA Vario III with my notebook (HP TC4200 Tablet PC running a Broadcomm BT stack) I had a "Voice gateway" service available from my phone. This is in addition to DUN and Network Access Point services. Basically when I PC and phone connect my PC acts as a BT speakerphone.
I've not used the setup that often but it seems to work pretty well. When 1st connected a pop up briefly appears to inform me that the "Call Monitor" is active and that's it til a call comes in. At that point a notification gets displayed saying the number or callerID with buttons for "Accept & "Reject". If I take the call, or transfer and active call to the BT headset then my PC picks up the call.
By default my notebook uses its built in loudspeaker and microphone. However I can also pair my PC with a BT headset then route all sounds through it. It's a bit of a faff though as I have to change the active sound device to whatever headset is connected. I also need to connect the PC and eadset 1st if the headset is also paired with the phone, otherwise the real BT headset may take the call instead of the "virtual" one (notebook). I haven't tried this with my BT stereo headset though, only my conventional mono...
Whilst playing during a particularly boring teleconference I also discovered that I can record the calls and pass the sound through a text to speech converter supplied with the PC... the results of the latter are more for entertainment than serious use, althoug I suppose with some training it might be better...
I also use Salling Clicker. The phone events work pretty well, but to date I've yet to take a call using the PC whilst it is running.
Not sure if this helps in your case, but it seems like what you want to do is definitely possible.
Fatman it's like you've taken a page right out of my book. What software are you using for speech to text? This could make for a useful and entertaining audit trail... Sounds like I need to pickup a new BT adapter based on the Broadcomm stack. If anybody has had any luck using the Toshiba stack, please share.
thetiltedKaiser said:
What software are you using for speech to text?
Click to expand...
Click to collapse
I'm not sure if the program is available as separate software. It's called "Microsoft English Recognizer" and was pre-installed on my notebook. I have no idea how it compares to any other programs. I've only playted around with it very briefly as a way of killing time during a boring teleconference!
However, I can't see why any program couldn't be used as the sound from the phone is available to any software as the BT stream from the phone becomes the default input sound feed.
One thing I will definitely be trying next time is recording the call whilst taking notes using Tablet Enhancements for Outlook. THis basically augments the normal MS Outlook Journal functions so I can take handwritten notes which can be edited, commented, and then later searched. If you record the microphone feed (i.e. the phone call in my case) the notes are then linked into "timeline" of the call so you can see what notes were taken when, and conversely what happened in the call when you took a particular note... should be useful if it works...
Let me know if you need any additional info about BT stack versions and drivers etc but it does sound like you'd need the Broadcomm stack - ISTR reading that the Brioadcomm stacks on some PocketPCs have laways performed better than the MS equivalents, and it appears that the same if true for PCs too... The BT on my notebook is far more reliable, and flexible than that on my work PC which uses an MS BT dongle. However, that may be due to the fact that the BT on my notebook is built in and not USB...
Good luck!
found this:
Bluesoleil
http://www.bluesoleil.com/download/index.asp?topic=bluesoleil6x
It has a Dialer plugin.
Have not tried it yet but if someone has please let us know.

Telephone cant find bluetooth-headset!

Hi! I have a brand new Jabra 620s bluetooth-headset. When I turn the headset on and search for bluetooth devices on my computer I can see it, but I cant see it when I search for it on my touch pro.
What could be the problem here?
I had a similar problem last night (and have it quite often when i need to pair). It doesn't detect it until the 3rd or 4th time in which last night it didn't even detect it either. I power cycled the headset and my phone found it the first time.
Yeah, I tried rebooting my headset and my phone several times, but I still can't get it to work...
Figured it out... Had to hold in a button on the headsett to make it avaliable for new devices...
But new problem:
I don't get sound in the headsett when I play music. But when I make a call the sound is in the headsett. What could be the problem here?
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
nyckid211 said:
Maybe its the settings in your a2dp profile?
I read this "Set-up of the 620's was simple enough, the headset unit is paired with the device that is streaming the music and / or a mobile phone. A smart move from Jabra allows the 620s to be connected to both a mobile phone and an audio device simultaneously. However our set-up was rather more straight forward than most as we used Jabra's own Bluetooth dongle that supports the all important A2DP (Advanced Audio Distribution Profile) profile. Real life for most users is a different kettle of fish with support for A2DP being quite sparse, most music gateways and servers and even music ready mobiles rarely support the required profile." source: http://www.lordpercy.com/jabra_bt620s_review.htm
Maybe some tweaking in hklm\\software\microsoft\bluetooth\a2dp\Settings
I believe this headset also supports AVRCP profile. In any case, make note of your original configuration prior to making any changes.
Click to expand...
Click to collapse
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
slogum said:
I tried to install btAudio. Now I have sound in my headset, but det sound-quality is CRAPPY! Are there any other software avaliable that can fix this? Dont know if I want to edit the registry.... There must be a solution?
Click to expand...
Click to collapse
You can use Advanced Config to enlarge the bluetooth bitpool under the bluetooth tweaks. Set it to "very high" for best sound quality (uses more system resources tough).
HTH
Maximum bit-pool setting is 1561. I dont think it solves the problem, cause the quality is still really bad.
Any other tips? Or do I have to return the headset cause a brand new ~1000$ phone cant play on a wireless bluetooth headset?!
Bump.. Are there really no solutions?

REQ: freeware Bluetooth-toggle at carkit power

I've seen the question (and the answers) several times here; But not for freeware versions.
The request is quite simple: Automatically turn on the Bluetooth when HD2 is placed in active carholder, so it recieves power. And BT off again, after removing from power.
Several paid programs can do it with profiles. But I don't need all the profiles, just one nifty little app to do the BT-toggle-at-power-toggle-trick. Bluepower should do the trick, but that doesn't work on HD2 sadly.
I allready placed a shortcut at the todayscreen, but it can be done automatically, so it should be done automatically. (you get the idea? It CAN be done, so it HAS to be done... )
Anyhow: does anyone know of a freeware app that does the trick, turning on BT at power-connected, and off again at power-disconnected?
Thanks in advance!
looking for this too!
fantastic idea, i see no reason for bluetooth to be disabled when connected to a power supply.if anyone can do it xda can!
google this
kixass bluepower
It worked for me , while I still had the Touch Diamond and Touch HD
Haven't tried it on HD2, but, hopefully it will work
I allready found kixass bluepower, but another thread here on XDA says it doesn't work on HD2 due to different Bluetooth methods:
http://xda-developers.mobi/viewPost.php?id=599980&PHPSESSID=b4f4cf54198fe7e540312d95fbb088aa
@SMS92: it's the other way around: connect to power = BT on, disconnect = BT off. (Hence power comes from the active carholder, but the audio-signal is connected via BT)
I'm not sure if i understand you correctly but don't you mean ?
Settings > All settings > System > Car kit mode > "Auto connect when in car kit mode" ??
greetz,
Plaspop
No, for that the bluetooth allready has to be on (Or am I mistaken? EDIT: YES!!!! I'm mistaken!!)
I'd like the BT to be off all day, except when I'm in the car. For that's the only place where I use BT. After getting out of the car the BT should be switched off again.
In order to do this automatically the phone needs to know whether I'm in the car. The easiest trigger for that is the power-connection, as I place the phone in an active phone holder (Brodit). This action could then trigger BT to switch on automatically, and removing the phone from the holder (and therefore from the power) should switch BT off again.
(The BT is used to connect to the built-in carkit in the Mazda 6), Power to the phone is supplied via the active carholder, which ONLY gives power, no audio-connection.
EDIT!!! OOOOW WAIT!!!!! YOU ARE RIGHT!!!!!!
WOW!!!! So simple.....
(Settings > All settings > System > Car kit mode > "Auto connect when in car kit mode")
So no special app needed, no profiles, no reg-changes, just a mere setting.
I LOVE HTC! Soooo much clever things in this HD2!
Just tested: BT off, connect to carpower: BT switched on automatically. Remove from power: BT switches off again. So this works!!!
(I didn't have time to test actually connecting to the car in this modus, but normally it works, so I assume this last bit works too.
You're my hero! (ok, that's a bit exegerated, but you get the idea) THANKS!
EDIT: see post below for last status.... sh*t.....
Ehr...... Sh*t.... My Brodit holder doesn't connect the right pins to trigger the carmode, and therefore the BT doesn't automatically switch on.
My desktop loader uses a converter cable, and that one DOES trigger the carmode
So.... sorry, no solution yet....
Found this in another thread. Could this help you ?
http://forum.xda-developers.com/showpost.php?p=3367344
Thanks, but no, that doesnt work on the HD2.
Has something to do with changed Bluetooth system in the HTC models after the touch?
A similar request thread has been started here: http://forum.xda-developers.com/showthread.php?t=667901&goto=newpost
Im following it too, and hope it will lead to development of a cab for this much wanted function.
I don't know how the carmode works, but issn't it possible to edit the registry to activate the carmode when the phone is on any kind of charger, instead of when some pin is connected? Then you would combine two functions witch are already on the phone.
Brodit activation of car kit mode
Has anyone succeeded in getting the Brodit car holder to automatically activate NaviPanel?? I see in other posts that if pin 4 of the micro USB is grounded it auto switches NaviPanel - has anyone else tried this yet?

One click - Connect 2 Specific Bluetooth device for A2DP and Phone app

An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Would you mind sharing a code snippet on how you achieve this? I've been working on a little program that I intend to use around the house and this is the missing piece that I can't figure out. Basically, I have some NFC tags spread around the house and a receiver app that triggers various actions. One of them enables bluetooth on my device (if off), turns on my home audio receiver (over telnet), connects to the receiver's A2DP device (this is the missing piece), and launches a music app.
I've seen examples where this works using an AIDL method, but from what I've gathered this no longer works under Android 4.2. Does your app work on 4.2? Any hints you can provide?
Thanks!
Brian
I'm not the writer of this app.
You could try contacting them via the email listed on Google Play.
BTW, while you're making your app, please dedicate a thread to it on XDA so we can all beta test and buy it later!
klau1 said:
I'm not the writer of this app.
You could try contacting them via the email listed on Google Play.
BTW, while you're making your app, please dedicate a thread to it on XDA so we can all beta test and buy it later!
Click to expand...
Click to collapse
Oh, OK. I just assumed this was your app.
After reading the Play Store description more carefully, I don't think this app actually does what I'm trying to do (programmatically establish an A2DP connection). It appears this app enables / disables certain profiles but the actual connection is still handled by the OS.
As far as the app I'm making, I was intending it to just be something for personal use. I'm planning on keeping it very lightweight and tailored specifically to my needs. For it to be used by anyone else they would have to have the same brand of A/V receiver as me (Pioneer) that supports the same telnet commands. Most of the rest of the functionality of the app can be duplicated by using some of the existing NFC apps like NFC Task Launcher. If I ever develop it into something interesting that could be used by a wider audience I probably will post it on XDA for feedback though.

Categories

Resources