Related
Hi guys
Ive recently got my jammin and have found that without installing the extended rom the device speed is alot better.
Bu theres 1 prog in the extended rom that i use alot which is the phonepad ...Ive found the cab located in the rom but the problem is the cab also install the voice app / pdf viewer and java app.
Is there a cab available thatll just install the phonepad and nothing else?
Thanks
if you post the cab we can easily extract the parts you don't want, or you can do it yourself with WinCE Cab Manager
Ok brilliant ive attahced the cab
Thanks alot
This cab doesn't install the voice cab or anything like it.
It makes 4 shortlinks and addssome values to the register, that's all it does.
so it just installs the phonepad...is there anyway of deleting all the etxra links .etc .etc and just it installing the phonepad ?
No it doesn't install the phonepad, in fact it doesn't install any software at all, this cab.
However you can delete the shortlinks, located here; /windows/start menu/
But remember you still don't uninstall/delete the actual software.
Ah , ok ....so do you know the phone pad (touchpad thng for texts .etc .etc) ....Not smartdialing program...Is this actually located on the rom itseld or does it install from the extended rom.
As i thought it was installed form the extended rom but now this as got me thinking its hard encoded in the rom itself?
Is this rite on HTC devices?
Thanks
The touchpad itself is included in the rom, however I've seen you can enable/disable some of those input pads with some registry settings.
Unafortunatly I don't know what settings and if it can be done on all htc devices.
On my wizard it's enabled by default.
ok ,Thanks for the help / info
Hi all,
I took out this thread from
WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB for Himalaya
and cooked a ROM with minimum applications.
Operator has set to O2.
Applications Not included.
Smart Dialing
Scenario
Call Filter
ZoomSMS
and more, comparing to WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB
I find buggy with Eten Dialer running on Smart Dialing.
Included.
Calculator
Camera Fix (patch)
Eten Dialer (skin, u got to install from below link)
http://www.howardforums.com/showthread.php?t=886355]here
My ROM link is here
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
please note.
In order to use Tweak2k2, please install NETCFv2.wm.armv4i.cab (about 5 MB)
If you are installing Resco Explorer & Regedit.
Please seperate the installation.
Resco Explorer can be installed into RamDisk
Regedit has to be installed into Device
Any applications that requires Core OS, have to be installed in Device.
Example:
Pocket Informant
MCM (Microsoft Voice Command)
SPB Weather
SPB Plus
If you are using Pocket Mechanic, bared in mind, do not remove registry that you are unsure, as the application will just scan though your registry and display all unwanted registry.
Once deleted, your Camera - Video wont be working anymore.
/Cheers.
Disclaimer: use at your own Risk. I dont take responsibility if your device crash.
ROCKON!
thank you dude for the hard hard work.
i can never get this cooking to work! i dont know how ou guys get it done!
but we appreciate the free mooching!!
flashing it right NOW. will let you know what happens
Good job dear, Go on!!!!
1. Have you put in this the MS PPT?
2. If you have removed every thing from this then you could very well pack NETCF 1.0 or 2.0SP1 in it. It is just a suggestion. Only my opinion......
My good wishes to you...
Hi Master,
Seriously speaking, i still a noob here.
Since u told me about the PPT (Mobile Powerpoint) was not install from ur ROM, so i did not, but just use back your ClearView.
What i did was meddling your OEM folder.
Is good to have those Mobile PPT back instead of ClearView, and pre-install NETCF v2 or v1, i really sorry that i have no idea how to do it.
because i read BuzzDeV's forum.
Try to do those rgucomp to get the registry out, and default.hv/user.hv
still dont understand how everythings works.
I did installed Registry Workshop or Hex Editor, even i manage to open the Registry, i see things that i dont wish to see there, but again, if i remove, i dont even know where those registry links to which files.
haha, basically, i am just a noob who only know how to meddle the OEM folder. haha.
I did try to use Tof_clock ROM, but because his already packed everything together, likewise, your 3.00 is seperated into different folders, just need to remove or add links to OEM folder.
Hope i did not disappoint u for not able to fulfill your suggestion.
BuzzDev Forum has the Rom Kitchen thread, too many useful tips, but i just cant get to understand their explanation. lol
I will try out again.
Setting NETCF v2 into your customization folder, is not a problem.
I believed NETCF v2 can be extracted out to make as viewimgs , convert to module instead of files.
but because i dont know how to do it, lol
any advice?
Link Broken
keithhiap said:
Hi all,
I took out this thread from
WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB for Himalaya
and cooked a ROM with minimum applications.
Operator has set to O2.
Applications Not included.
Smart Dialing
Scenario
Call Filter
ZoomSMS
and more, comparing to WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB
I find buggy with Eten Dialer running on Smart Dialing.
Included.
Calculator
Camera Fix (patch)
Eten Dialer (skin, u got to install from below link)
http://www.howardforums.com/showthread.php?t=886355]here
My ROM link is here
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
please note.
In order to use Tweak2k2, please install NETCFv2.wm.armv4i.cab (about 5 MB)
If you are installing Resco Explorer & Regedit.
Please seperate the installation.
Resco Explorer can be installed into RamDisk
Regedit has to be installed into Device
Any applications that requires Core OS, have to be installed in Device.
Example:
Pocket Informant
MCM (Microsoft Voice Command)
SPB Weather
SPB Plus
If you are using Pocket Mechanic, bared in mind, do not remove registry that you are unsure, as the application will just scan though your registry and display all unwanted registry.
Once deleted, your Camera - Video wont be working anymore.
/Cheers.
Disclaimer: use at your own Risk. I dont take responsibility if your device crash.
Click to expand...
Click to collapse
Hi,Link for your ROM file is broken it says "Forbidden
You don't have permission to access /file/32772/WM5-3-00a-64-LOC.rar.html.
Ah, that why i hate using free hosting. lol
Actually, i can download.
The procedure is. you click the link below.
http://www.sharebigfile.com/file/327...4-LOC.rar.html
1. scroll down the page to centre.
2. enter the number display
3. click submit.
5. the page will reload, and you have to wait for about 1min (lesser then)
6. the page will reload again, and u will see the download button (in green button)
/cheers.
keithhiap said:
Ah, that why i hate using free hosting. lol
Actually, i can download.
The procedure is. you click the link below.
http://www.sharebigfile.com/file/327...4-LOC.rar.html
1. scroll down the page to centre.
2. enter the number display
3. click submit.
5. the page will reload, and you have to wait for about 1min (lesser then)
6. the page will reload again, and u will see the download button (in green button)
/cheers.
Click to expand...
Click to collapse
Your link is really broken. see the screenshot attached...
keithhiap said:
Hi Master,
Seriously speaking, i still a noob here.
Since u told me about the PPT (Mobile Powerpoint) was not install from ur ROM, so i did not, but just use back your ClearView.
What i did was meddling your OEM folder.
Is good to have those Mobile PPT back instead of ClearView, and pre-install NETCF v2 or v1, i really sorry that i have no idea how to do it.
because i read BuzzDeV's forum.
Try to do those rgucomp to get the registry out, and default.hv/user.hv
still dont understand how everythings works.
I did installed Registry Workshop or Hex Editor, even i manage to open the Registry, i see things that i dont wish to see there, but again, if i remove, i dont even know where those registry links to which files.
haha, basically, i am just a noob who only know how to meddle the OEM folder. haha.
I did try to use Tof_clock ROM, but because his already packed everything together, likewise, your 3.00 is seperated into different folders, just need to remove or add links to OEM folder.
Hope i did not disappoint u for not able to fulfill your suggestion.
BuzzDev Forum has the Rom Kitchen thread, too many useful tips, but i just cant get to understand their explanation. lol
I will try out again.
Click to expand...
Click to collapse
1. Download the folder from here--> ftp://xda:[email protected]/Uploads/Himalaya/C_Shekhar_HIMA_AKU3.2_R40_P24/MS_office.rar
2. Unrar the folder and the folder inside be placed in the /dev/OS by replacing the existing one.
3. Remove the clearvue folder from the /dev/OEM.
4. cook the ROM.
You shall have MS PPT instead of clearvue. Yes the clearvue PDF reader shall also get lost in the process. I have UPXed the PPT, Word as well as Excel in this which is fully functional and tested. Try it if you can....
Sigh, my mistake. lol
the actual link is this, which is from the very top thread.
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
And thanks Master, i shall try to dump the PPT in this few days.
Thanks again
keithhiap said:
Sigh, my mistake. lol
the actual link is this, which is from the very top thread.
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
And thanks Master, i shall try to dump the PPT in this few days.
Thanks again
Click to expand...
Click to collapse
Still the link is forbidden...
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
Humm... that is funny, cause i can access.
Anyway, i have plug in the PPT module, and is working now.
Also , due to the trouble to install individual, i dump in Netcf v2 into the customization folder.
Total Storage is 30.53, and In use 9.32
Later i find another host to host the file.
will try to help
using your ROM,
damn stable. thanks for not branding stuff on the splash screen.
liked it a lot
i will try to upload it to rapidshare for the benfit of others who really need to use this clean ROM
thanks dude. i hope you get to integrate NetCF 2
although just installing it over isnt that hard.
Download IT
heres a RS file download link for people who dont understand sharebig file download system
http://rapidshare.com/files/6563901/WM5_3_1_.00a_64_LOC.rar.html
Thanks for trying my self cooked ROM.
Everything has to thanks Master for providing the ROM, for me to cook.
I believed the Stabability between 3.00 and Master's ROM is the same, as is both using AUK 3.2. Just versioning different.
For my 2nd Self cook ROM, i have follow Master's suggestion
and have insert in Mobile PPT and remove Clearvue.
I have no way to intergrate NetCF v2, cause is a cab file, and there is no way i can see the DLL files. Unless Master able to create the DLL for me to play with it.
What i did for this 2nd self cook ROM is to put the NetCF V2 cab in it, which takes up Storage space.
Guess nobody would wants this way.
Well. i put it is to convenient me not to install again. lol.
And thanks for helping me to find another free file hosting.
Rapidshare, if i am not wrong, high chance will end up cannot download the file.
/Cheers.
NETCFv2.0sp1 OEM
@Hi Keithhiap
Here is the OEM for NETCF v2 SP1 .--> ftp://xda:[email protected]_HIMA_AKU3.2_R40_P24/NETCF2.SP1.Full.rar
Kindly unrar it and place it inside the OEM folder. You have ample space in your ROM. It sould fit into it. All the best...
Cool, Thanks alot Master.
Will dump in and create a new ROM soon.
Really thanks for your help.
Can we have the ROM Kitchen for Aku 3.3?
double_ofour said:
Can we have the ROM Kitchen for Aku 3.3?
Click to expand...
Click to collapse
We can try that. But so far I am unable to know what are thw features of AKU 3.3 over and above 3.2?? Could not lacate that any where...
Hi Master,
The NetCF does not work.
I install Tweak2k2, got the certificate error.
The NetCF 2 for my version is this label NETCFv2.wm.armv4i.cab
If i dont recall wrongly, i downloaded for one of the game.
Binary Casino.
Weird. hehe
Hello,
I have flashed my Fuze with a WM 6.5 ROM without TouchFlo. I am now in need of TouchFlo, but do not want to wipe out all the data and contacts from my phone. Is there a place I can download a TF3D version (latest is good, but older version is fine too) to install WITHOUT flashing another ROM?
Thanks,
Walletless
just do a search, theres alot of versions and themes. its really not hard to find.
or you could back up all your data with pim backup or sprite and then flash to a rom with tf3d
walletless said:
Hello,
I have flashed my Fuze with a WM 6.5 ROM without TouchFlo. I am now in need of TouchFlo, but do not want to wipe out all the data and contacts from my phone. Is there a place I can download a TF3D version (latest is good, but older version is fine too) to install WITHOUT flashing another ROM?
Thanks,
Walletless
Click to expand...
Click to collapse
Go here and snoop around: http://forum.xda-developers.com/showthread.php?t=542113, post #4 is the download. DO NOT JUST GO DOWNLOAD AND INSTALL!!! Read the information posts. There is good info in there and if you jack your phone up because you didn't read it's not anyones fault but your own. Hope this is what you were looking for.
Thanks everyone. I will try s8p8's suggestion
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
Bro , i hope you can make this work , cause i think most of the ppl will be much appreciate !!! Keep it up .
buddy, i need it.
hope we can figure out and make a CAB for it.
good luck lol
zenkinz, no hurry.
Being waiting for it.
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
I've just looking for this! Can anyone please help!
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
I've been looking for it for a long long time ago...
but i cant find any workable CAB of it.
so thats why i still keep my LEO as default 1.48 ROM..
and now, Thanks for your hard working,
I can try the newest 2.01 ROM.
I *think* I might have found the problem but I need to flash a custom ROM to test it. If anybody is game to try it on their custom ROM, please pm me your email address and I'll send you the CAB. The reason why I'm not publishing it here is because it might cause you to hard reset your phone if it didn't work out (as happen to one of the 'early adopter' user)
zenkinz said:
I *think* I might have found the problem but I need to flash a custom ROM to test it. If anybody is game to try it on their custom ROM, please pm me your email address and I'll send you the CAB. The reason why I'm not publishing it here is because it might cause you to hard reset your phone if it didn't work out (as happen to one of the 'early adopter' user)
Click to expand...
Click to collapse
I'm looking for a RIGHT ROM to try.
I'll let your know when i'm ready.
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
zenkinz said:
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
Click to expand...
Click to collapse
I volunteer to try your cab, and report back soon!
I've tried it, but it didn't work. when inputting sms contact names, no name suggestions available. and the Pin Yin didn't work at all. And when I tried to uninstall and reset the device, the whole device couldn't boot, I was forced to hard reset my HD2.
precsmo said:
I've tried it, but it didn't work. when inputting sms contact names, no name suggestions available. and the Pin Yin didn't work at all. And when I tried to uninstall and reset the device, the whole device couldn't boot, I was forced to hard reset my HD2.
Click to expand...
Click to collapse
I was having the same problem as well . Hope there will be a refine version .
zenkinz said:
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
Click to expand...
Click to collapse
I tried it on PDAVIET V05 28014
I can call it out but the hand writing does not show the line when you draw on the screen, when using the 筆畫 it just show the E T U D G instead of chinese.
ok so it looks like I really have to use a custom ROM to test myself, as my fear is that the existing registry in the pure english rom conflicts with the CAB.
this will take awhile unless somebody adventurous could trace the original ezinput registry and identify any potential conflict to the chinese input. (but doing so will also mean you will need to hard reset ur device after the troubleshooting)
Hi, zenkinz
Thanks for your effort.
Can you create a tutial or CAB for LEO custom ROMs (like Dutty's, Xanny's ......) to add Asia support? (just capable of viewing, not UI localized)
You can try to analyse the cabs from Lingvosoft, as they offer asia input keyboards.
I am using their Japanese Keyboard. This will show up the keyboard.
But the keyboard alone is not enough, you need copy a chinese font from your desktop windows to the windows\fonts folder on your Leo.
Then you will have to change the standard font in HTC manilla or Windows 6.5 if you want to be able to display the characters in the main applications (unless that application offers font selection).
I have attached the Chinese and Japanese keyboard cabs, as well as the Chinese font (ming true type font). Those are from the trial version of their translation suit, but I think the keyboards don't require a license (except for use in the translation application, then they get barred).
zenkinz said:
ok so it looks like I really have to use a custom ROM to test myself, as my fear is that the existing registry in the pure english rom conflicts with the CAB.
this will take awhile unless somebody adventurous could trace the original ezinput registry and identify any potential conflict to the chinese input. (but doing so will also mean you will need to hard reset ur device after the troubleshooting)
Click to expand...
Click to collapse
sorry to say that my voluntary offer ends there. The problem is if there is a problem, I cannot uninstall it and revert to previous state, and also, worse is, the entire rom couldn't start. I can't take too much trouble to try it unless it can be reverted easily.
precsmo said:
sorry to say that my voluntary offer ends there. The problem is if there is a problem, I cannot uninstall it and revert to previous state, and also, worse is, the entire rom couldn't start. I can't take too much trouble to try it unless it can be reverted easily.
Click to expand...
Click to collapse
the following file is come from one Taiwan WM site,
anyone if have interest, can try it out.
seem that someone work fine with the file.
http://www.badongo.com/file/18581778
if you can read chinese, you can check with the following link,
also discussing about the Touch Input 2.0
http://www.mobile01.com/topicdetail.php?f=129&t=1317192&last=16027178
cmant said:
the following file is come from one Taiwan WM site,
anyone if have interest, can try it out.
seem that someone work fine with the file.
http://www.badongo.com/file/18581778
if you can read chinese, you can check with the following link,
also discussing about the Touch Input 2.0
http://www.mobile01.com/topicdetail.php?f=129&t=1317192&last=16027178
Click to expand...
Click to collapse
thanks for the link. From the thread, it looks like the thread start has the same problem as us, I will read further to see what's the missing dll/registry.
This is my first ROM I'm releasing.
I have created a Danish WM6.5 ROM with 85 MB free ram
I have done everything I can to make it stable and fast. I'm using it myself and I'm very happy with it.
This ROM is based on the latest Danish stock ROM I could get hold of.
I have removed some of the stock programs, and have added the following programs:
Code:
Bluetooth notifier
Mortscript (Un-Installable)
The ROM is extendir enable. You can everything about extendir here
This ROM is created with ervius visual kitchen
I thank everyone that have made this possible.
If I'm distribution anything that I shouldn't or haven't mentioned any people that I should then please let me know. It is not out of respect of other people, it is simply because I either didn't realize that I have used some of their stuff or because I have forgotten.
To use this ROM you must have a storage card for the initial flash.
First you extract the contents of the lagerkort.7z to the root of the storage card, so that you end up with a folder called extendir with a few folders and one file inside.
If you want some cabs to be installed as part of the new flash then copy then to the extendir\setups\<sub folder>. only cabs that are in a sub folder in setups will appear. So make one and only one level under setups for the cabs. (they will not be installed automatic, you get to chose which you want to install, so all all you cabs if you want)
Then you flash the ROM and leave the storage card in for the first 2 boots.
on 1st boot after you have calibrated the screen the customization starts, WM looks awful here, don't worry about this, as this step will extract all of the missing WM files to to the extendir folder.
On 2 boot the preset installer will boot and you can chose a few extra cabs to install and the ones that you have added.
You can download the ROM from here:
4shared
You can download the extra package here:
4shared
Congratulation and wellcome new chef
I suggest you to include some pics because you will be ask for that
Cheers.
Thank you.
Pictures added
Danish rom with Manilla?
Would it be possible to create a version with Manilla? I would really love a danish rom with Manilla and HTC Weather...
Regards Ulrik
I possibly could create one.
But I recommend that you install Manilla after with a cab, or with zip files (in the extender folders) this should give the fastest rom. I can help create the scripts so that Manilla will install on first boot if you want?
hey man i can't get the hardware keyboard to input properly for æ, ø, å. I looked through your cabs but don't see a fix do you have one?
I tried this SkandinaviskTastatur5.CAB and XDA_JCEspi2005_Danish_Input_Kaiser.cab neither of which work. Let me know if you have a solution
I have a danish keyboard on my too, and the mappings are just fine on that one. So have no idea what could be wrong, unless there are more than one version of a danish keyboard. I access my æøå by FN and <UP><DOWN><UP> respectively.
I forgot to mention that I'm using a different rom to yours. Maybe you need a Danish WM 6.5 to get the hardware keyboard to work. If you could help me out in anyway that would be awesome cause it's a bit frustrating hunting around to find ? and stuff heh
Ahh that explains.....
I have no idea how to get the danish keys then. If I knew what to put in it I could create a CAB file for you, but I really have no idea what to put in to this cab...
I had the same problem when I used WWE roms, and never got it sorted.
@ Blindpet, try doing this:
Use a registry editor and change the following:
HKEY_LOCAL_MACHINE\Hardware\Devicemap\Keybd\CurLang to 1044, this worked for me
I tried your ROM and overall its pretty good but i dont know if its my phone thats not set up properly but this rom have got a lot of screen lag though.
Anyway would be great with a proper danish rom for this great phone, keep up the good work
//KillerBee
EDIT: This solution doesnt work for me now.. I am not quite sure how you are supposed to change the HW keyboard language for a winmo 6.5 phone