On above, its funny, mine is ROM wwe_Rm3070712, WinMobile 6 Pro. Installed only with o2 themes, fontpatch for chinese language support, and Smart text .
Problems are :
1) it hangs everytime after 1 hour on synchronising (on ActiveSync 4.5).
2) The power ON/OFF can only wake up the device from sleeping mode; cannot do a ON/OFF to power on or shut down. To soft reset, must use the poke hole method - small issue that I can live with it.
Previously using winMobile 5, no such things happened. Someone said removing the o2 themes solved the problem. I would do so if not for embedded o2 Calender that can display 6 grid lines to show 6 upcoming appointments. This is a must have feature to me.
Advice appreciated.
Related
I recently had my T-Mobile PPC Phone edition repaired after some months of nonuse. I had repalced it with an HP6315 - Lots of problems with the 6315 caused me to return to my PPC Phone. When it was returned from repair. The ROM seemed to be missing several features. No longer has a slider for back light brightness adjustment when on battery power. Buttons only shows 2 buttons rather then 4. and there is no lock to prevent button use without pressing the power button first. The service man told me I was getting the PPC confused with the hp 6315 and these features were never available on the PPC. Please help and advise me if he is right so I can apologize and resolve this issue.
Thanks
imcharles
ROM 4.01.16 ENG
Windows Mobile 2003 version 4.20.0 (build13252)
I have not seen the ability to adjust backlight, you can lock the buttons though so the only way to switch on is with the power switch, however I understand this was only avaliable under certain roms and was under the @[email protected] setting on phone settings. I dont know which buttons you are referring to so cant help you there.
I flash the my hima with the TofClock 2.01a32WWE ROM, and it works fine, and I'm very glad with it.
But now, some time I turn off my hima by pressing the power button, the screen went black, after a while, I want to light it to operate, the hima keeping black, and the hima cannot operate any more, and I tried to call my phone(hima), the hima didn't ringing. Also, SMS, MMS, all function dead. But the same time, the 2 leds, Blue and Green/Red, flash like normal.
At this time, the only way to operate hima normally was soft-reset it by press the hole with my pen.
:shock: :shock: :shock: :shock:
Is there someone experience this situation, and is there some way to solve the problem.
:idea: :idea:
ps: in the Settings --> System --> Power --> Advanced page, the 2 options can set "Turn off device if not used for" some minutes, when "turn off" time out, the same problem occurs like above, I called it Auto Turn Off
My device is Dopod 696 (Maybe Chinese mainland version of O2 XDA II).
:wink: :wink:
I also experienced similar problems, but with the 64 version.
After a while, when I tried to turn it back on, it began to act strange. First the automatic turn off backlight option was every time reset to 10 sec and then after a day or 2 I noticed that the screen was sometimes still showing some black lines. Changing the volume still gave the corresponding sounds, but nothing else seemed to work (or wasn't visible). Normal operating mode was only reinstated after a soft-reset.
I gave it a hard reset and restored a backup (using SPB). It's operating again, but it already contains the 10 sec change.
So probably have to start clean again and install everything from the beginning, but before I do I would like to make sure it will not happen again.
Appears like the Power Off option is screwed, no matter in which way I use it (button or a program).
Anyone have any thoughts on it?
zplei
yes, i have same problem on my O2 XDA ATOM
with last rom and other
I have the same problem too, the only ay to have it back is softreset
i was using spb to toggle display mode.
someone said can be solve by reegedit. but how to.
anyone found a solution..?
Hi Folks,
I had my Cuise to repair at o2 (rubber issue). After receiving my gadget, I had to re-install my image (original o2 WM6.1 and restore my backup (Sprite Backup)). Since then my Cuise tend to freeze after wakeup for several seconds. Not every time, just sometimes.
Does anyone has an idea what happens?
Best regards, oli
I have the same kind of problem. When I push the on/off button to get my Cruise off of standby mode, it doesn't do a thing. All other buttons are ineffective too. If I do a soft-reset, it acts normal for 2 or 3 minutes, but if it gets into standby mode again (automatically or manually), same thing happens.
I now run Touch-IT Lite v.1.0 on it since yesterday, but I had the same problem with the full version of Touch-IT. The full version worked very well for maybe a month, but I don't know if it's the firmware or that's something wrong with my Cruise. Can anyone please help?
EDIT:
Nevermind, I found this topic about my problem: http://forum.xda-developers.com/showthread.php?t=366558&page=1
I fixed the issue on my Touch Cruise. As I tried to optimize my power management using the Tweak Tools and enabling power management for SD Card etc., I set everythin to "Default" there and now it is working fine again!
Well, still now got a hughe battery drain left... :-(
Hi all..newbie to this site and to smart phones so excuse the steep learning curve !
Have had the phone for a few weeks and learning lots. All of sudden yesterday when trying to make a calendar entry, the full QWERTY, compact QWERTY, and phone pad can no longer be used to enter text. It's stuck on numeric mode. Tapping the "abc" key on the bottom of the full QWERTY keyboard doesn't change anything. Can still use transcriber and full keyboard for now. BUt when switched to Note program, all entry methods work. Have not installed any new programs lately (besides a few games and new calculator). Have been using S2U2 and Diamond tweaks to help with a few other problems...Help please since this is now my primary calendar and runs my life so need to have this working again!!
you have this problem too? i have the htc diamond keyboardon my device(mwg zinc ii)but sometimes it just enter numbers only. to solve this, i tap on option and tap ok then it works fine again. most people who installed the htc diamond keyboard on their non htc device have this problem too. but this is the first time i heard of a diamond having this problem. did you upgrde to the latest diamond rom?
Yes it's on a brand new Diamond..running ROM version 1.93 dated Oct 30/2008 so I am assuming it's the most up to date one. Just tried it again now, and it let me enter on word in full QWERTY, then it automatically changed to numeric and locked me out of letters again....IT's FRUSTRATING
Ok..thought I bump this up to see if will get more attention.
Contacted HTC Helpdesk in the meantime, and suggestion was to hard reset...ARRGH!!!!
Just so I'm clear, after a hard reset, the device will turn back to factory settings, and all I have to do is sync it with my PC to bring back data, then reinstall programs that I've added, and then tweak the settings that I've already done and the phone will be back to "normal"??? Or are there things that the phone providers (Rogers) put in that won't come back after a hard reset???
this is bull****...mine is doing the same thing..and if u do a hard reset there are a lot of things that have to b reprogramed by sprint
HTC touch diamond full qwerty troubles
I have also had troubles with my touch diamond. Twice I have lost the ABC capability of the full qwerty option and the only option both times was to do a hard reset. The cell phone company could not figure out any other way to fix the problem and it did seem to fix it but there has to be something wrong with the programming to be causing this over and over again.
same as above. stuck number mode for both keyboards on a diamond.
Sometimes it has this kind of problem and when you power it on again it will work well. Everytime when I had this problems, I just power off and on. Then everything is okay. But I don't know the reason. Is that because some apps in the phone? Or the CPU is too busy to react.
Hi
I've had my orbit 2 for a while now using the o2 software and I thought today I would try and install HTC home to see what all the fuss is about!
I downloaded the cab and installed it but now my orbit 2 crashes on start up!
When I turn it on I get the blue o2 welcome screen, the green windowms mobil 6.1 screen then it loads. The o2 smart bar is still there and the two screen buttons say calander and contacts (as its always been).
Those buttons then change to phone and menu I believe and the phone crashes!
How do do a factory reset the phone without being able to turn it on?
Update: It appears I can access the phone when its plugged into my pc, but as the phone crashes sometimes!
Help!!!!
press the two hardware phone keys together and then, while holding
them pressed, softreset with the pen. A message should appear on
the screen, that you will lose all personal data. Press green button
to confirm and phone will HARDRESET...
Good luck,
Olioaglio
Are you using the right cab file?
Hi,
I have an Orbit 2 and have no problems with my 6 tab HTC home file.
You do need to take care which version you are using though.
The cab file I have and which I know does work is:
HTC.Kaiser.Home.Eng.0409.6Tab.sch
Instead of hard resetting your orbit 2, just remove the cab file you're using and install the cab file I list above and which you should find by doing a search of this site. Then do a soft reset and it should be fine.